82 строки
2.5 KiB
C
82 строки
2.5 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2007 by Analog Devices, Inc.
|
|
*/
|
|
|
|
#ifndef __MUSB_BLACKFIN_H__
|
|
#define __MUSB_BLACKFIN_H__
|
|
|
|
/*
|
|
* Blackfin specific definitions
|
|
*/
|
|
|
|
/* Anomalies notes:
|
|
*
|
|
* 05000450 - USB DMA Mode 1 Short Packet Data Corruption:
|
|
* MUSB driver is designed to transfer buffer of N * maxpacket size
|
|
* in DMA mode 1 and leave the rest of the data to the next
|
|
* transfer in DMA mode 0, so we never transmit a short packet in
|
|
* DMA mode 1.
|
|
*
|
|
* 05000463 - This anomaly doesn't affect this driver since it
|
|
* never uses L1 or L2 memory as data destination.
|
|
*
|
|
* 05000464 - This anomaly doesn't affect this driver since it
|
|
* never uses L1 or L2 memory as data source.
|
|
*
|
|
* 05000465 - The anomaly can be seen when SCLK is over 100 MHz, and there is
|
|
* no way to workaround for bulk endpoints. Since the wMaxPackSize
|
|
* of bulk is less than or equal to 512, while the fifo size of
|
|
* endpoint 5, 6, 7 is 1024, the double buffer mode is enabled
|
|
* automatically when these endpoints are used for bulk OUT.
|
|
*
|
|
* 05000466 - This anomaly doesn't affect this driver since it never mixes
|
|
* concurrent DMA and core accesses to the TX endpoint FIFOs.
|
|
*
|
|
* 05000467 - The workaround for this anomaly will introduce another
|
|
* anomaly - 05000465.
|
|
*/
|
|
|
|
/* The Mentor USB DMA engine on BF52x (silicon v0.0 and v0.1) seems to be
|
|
* unstable in host mode. This may be caused by Anomaly 05000380. After
|
|
* digging out the root cause, we will change this number accordingly.
|
|
* So, need to either use silicon v0.2+ or disable DMA mode in MUSB.
|
|
*/
|
|
#if ANOMALY_05000380 && defined(CONFIG_BF52x) && \
|
|
!defined(CONFIG_MUSB_PIO_ONLY)
|
|
# error "Please use PIO mode in MUSB driver on bf52x chip v0.0 and v0.1"
|
|
#endif
|
|
|
|
#undef DUMP_FIFO_DATA
|
|
#ifdef DUMP_FIFO_DATA
|
|
static void dump_fifo_data(u8 *buf, u16 len)
|
|
{
|
|
u8 *tmp = buf;
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
if (!(i % 16) && i)
|
|
pr_debug("\n");
|
|
pr_debug("%02x ", *tmp++);
|
|
}
|
|
pr_debug("\n");
|
|
}
|
|
#else
|
|
#define dump_fifo_data(buf, len) do {} while (0)
|
|
#endif
|
|
|
|
|
|
#define USB_DMA_BASE USB_DMA_INTERRUPT
|
|
#define USB_DMAx_CTRL 0x04
|
|
#define USB_DMAx_ADDR_LOW 0x08
|
|
#define USB_DMAx_ADDR_HIGH 0x0C
|
|
#define USB_DMAx_COUNT_LOW 0x10
|
|
#define USB_DMAx_COUNT_HIGH 0x14
|
|
|
|
#define USB_DMA_REG(ep, reg) (USB_DMA_BASE + 0x20 * ep + reg)
|
|
|
|
/* Almost 1 second */
|
|
#define TIMER_DELAY (1 * HZ)
|
|
|
|
#endif /* __MUSB_BLACKFIN_H__ */
|