microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/acpi/parser/psparse.c

1305 строки
35 KiB
C
Исходник Ответственный История

/******************************************************************************
*
* Module Name: psparse - Parser top level AML parse routines
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2005, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
/*
* Parse the AML and build an operation tree as most interpreters,
* like Perl, do. Parsing is done by hand rather than with a YACC
* generated parser to tightly constrain stack and dynamic memory
* usage. At the same time, parsing is kept flexible and the code
* fairly compact by parsing based on a list of AML opcode
* templates in aml_op_info[]
*/
#include <acpi/acpi.h>
#include <acpi/acparser.h>
#include <acpi/acdispat.h>
#include <acpi/amlcode.h>
#include <acpi/acnamesp.h>
#include <acpi/acinterp.h>
#define _COMPONENT ACPI_PARSER
ACPI_MODULE_NAME ("psparse")
static u32 acpi_gbl_depth = 0;
/* Local prototypes */
static void
acpi_ps_complete_this_op (
struct acpi_walk_state *walk_state,
union acpi_parse_object *op);
static acpi_status
acpi_ps_next_parse_state (
struct acpi_walk_state *walk_state,
union acpi_parse_object *op,
acpi_status callback_status);
static acpi_status
acpi_ps_parse_loop (
struct acpi_walk_state *walk_state);
/*******************************************************************************
*
* FUNCTION: acpi_ps_get_opcode_size
*
* PARAMETERS: Opcode - An AML opcode
*
* RETURN: Size of the opcode, in bytes (1 or 2)
*
* DESCRIPTION: Get the size of the current opcode.
*
******************************************************************************/
u32
acpi_ps_get_opcode_size (
u32 opcode)
{
/* Extended (2-byte) opcode if > 255 */
if (opcode > 0x00FF) {
return (2);
}
/* Otherwise, just a single byte opcode */
return (1);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_peek_opcode
*
* PARAMETERS: parser_state - A parser state object
*
* RETURN: Next AML opcode
*
* DESCRIPTION: Get next AML opcode (without incrementing AML pointer)
*
******************************************************************************/
u16
acpi_ps_peek_opcode (
struct acpi_parse_state *parser_state)
{
u8 *aml;
u16 opcode;
aml = parser_state->aml;
opcode = (u16) ACPI_GET8 (aml);
if (opcode == AML_EXTOP) {
/* Extended opcode */
aml++;
opcode = (u16) ((opcode << 8) | ACPI_GET8 (aml));
}
return (opcode);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_complete_this_op
*
* PARAMETERS: walk_state - Current State
* Op - Op to complete
*
* RETURN: None.
*
* DESCRIPTION: Perform any cleanup at the completion of an Op.
*
******************************************************************************/
static void
acpi_ps_complete_this_op (
struct acpi_walk_state *walk_state,
union acpi_parse_object *op)
{
union acpi_parse_object *prev;
union acpi_parse_object *next;
const struct acpi_opcode_info *parent_info;
union acpi_parse_object *replacement_op = NULL;
ACPI_FUNCTION_TRACE_PTR ("ps_complete_this_op", op);
/* Check for null Op, can happen if AML code is corrupt */
if (!op) {
return_VOID;
}
/* Delete this op and the subtree below it if asked to */
if (((walk_state->parse_flags & ACPI_PARSE_TREE_MASK) != ACPI_PARSE_DELETE_TREE) ||
(walk_state->op_info->class == AML_CLASS_ARGUMENT)) {
return_VOID;
}
/* Make sure that we only delete this subtree */
if (op->common.parent) {
/*
* Check if we need to replace the operator and its subtree
* with a return value op (placeholder op)
*/
parent_info = acpi_ps_get_opcode_info (op->common.parent->common.aml_opcode);
switch (parent_info->class) {
case AML_CLASS_CONTROL:
break;
case AML_CLASS_CREATE:
/*
* These opcodes contain term_arg operands. The current
* op must be replaced by a placeholder return op
*/
replacement_op = acpi_ps_alloc_op (AML_INT_RETURN_VALUE_OP);
if (!replacement_op) {
goto cleanup;
}
break;
case AML_CLASS_NAMED_OBJECT:
/*
* These opcodes contain term_arg operands. The current
* op must be replaced by a placeholder return op
*/
if ((op->common.parent->common.aml_opcode == AML_REGION_OP) ||
(op->common.parent->common.aml_opcode == AML_DATA_REGION_OP) ||
(op->common.parent->common.aml_opcode == AML_BUFFER_OP) ||
(op->common.parent->common.aml_opcode == AML_PACKAGE_OP) ||
(op->common.parent->common.aml_opcode == AML_VAR_PACKAGE_OP)) {
replacement_op = acpi_ps_alloc_op (AML_INT_RETURN_VALUE_OP);
if (!replacement_op) {
goto cleanup;
}
}
if ((op->common.parent->common.aml_opcode == AML_NAME_OP) &&
(walk_state->descending_callback != acpi_ds_exec_begin_op)) {
if ((op->common.aml_opcode == AML_BUFFER_OP) ||
(op->common.aml_opcode == AML_PACKAGE_OP) ||
(op->common.aml_opcode == AML_VAR_PACKAGE_OP)) {
replacement_op = acpi_ps_alloc_op (op->common.aml_opcode);
if (!replacement_op) {
goto cleanup;
}
replacement_op->named.data = op->named.data;
replacement_op->named.length = op->named.length;
}
}
break;
default:
replacement_op = acpi_ps_alloc_op (AML_INT_RETURN_VALUE_OP);
if (!replacement_op) {
goto cleanup;
}
}
/* We must unlink this op from the parent tree */
prev = op->common.parent->common.value.arg;
if (prev == op) {
/* This op is the first in the list */
if (replacement_op) {
replacement_op->common.parent = op->common.parent;
replacement_op->common.value.arg = NULL;
replacement_op->common.node = op->common.node;
op->common.parent->common.value.arg = replacement_op;
replacement_op->common.next = op->common.next;
}
else {
op->common.parent->common.value.arg = op->common.next;
}
}
/* Search the parent list */
else while (prev) {
/* Traverse all siblings in the parent's argument list */
next = prev->common.next;
if (next == op) {
if (replacement_op) {
replacement_op->common.parent = op->common.parent;
replacement_op->common.value.arg = NULL;
replacement_op->common.node = op->common.node;
prev->common.next = replacement_op;
replacement_op->common.next = op->common.next;
next = NULL;
}
else {
prev->common.next = op->common.next;
next = NULL;
}
}
prev = next;
}
}
cleanup:
/* Now we can actually delete the subtree rooted at Op */
acpi_ps_delete_parse_tree (op);
return_VOID;
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_next_parse_state
*
* PARAMETERS: walk_state - Current state
* Op - Current parse op
* callback_status - Status from previous operation
*
* RETURN: Status
*
* DESCRIPTION: Update the parser state based upon the return exception from
* the parser callback.
*
******************************************************************************/
static acpi_status
acpi_ps_next_parse_state (
struct acpi_walk_state *walk_state,
union acpi_parse_object *op,
acpi_status callback_status)
{
struct acpi_parse_state *parser_state = &walk_state->parser_state;
acpi_status status = AE_CTRL_PENDING;
ACPI_FUNCTION_TRACE_PTR ("ps_next_parse_state", op);
switch (callback_status) {
case AE_CTRL_TERMINATE:
/*
* A control method was terminated via a RETURN statement.
* The walk of this method is complete.
*/
parser_state->aml = parser_state->aml_end;
status = AE_CTRL_TERMINATE;
break;
case AE_CTRL_BREAK:
parser_state->aml = walk_state->aml_last_while;
walk_state->control_state->common.value = FALSE;
status = AE_CTRL_BREAK;
break;
case AE_CTRL_CONTINUE:
parser_state->aml = walk_state->aml_last_while;
status = AE_CTRL_CONTINUE;
break;
case AE_CTRL_PENDING:
parser_state->aml = walk_state->aml_last_while;
break;
#if 0
case AE_CTRL_SKIP:
parser_state->aml = parser_state->scope->parse_scope.pkg_end;
status = AE_OK;
break;
#endif
case AE_CTRL_TRUE:
/*
* Predicate of an IF was true, and we are at the matching ELSE.
* Just close out this package
*/
parser_state->aml = acpi_ps_get_next_package_end (parser_state);
break;
case AE_CTRL_FALSE:
/*
* Either an IF/WHILE Predicate was false or we encountered a BREAK
* opcode. In both cases, we do not execute the rest of the
* package; We simply close out the parent (finishing the walk of
* this branch of the tree) and continue execution at the parent
* level.
*/
parser_state->aml = parser_state->scope->parse_scope.pkg_end;
/* In the case of a BREAK, just force a predicate (if any) to FALSE */
walk_state->control_state->common.value = FALSE;
status = AE_CTRL_END;
break;
case AE_CTRL_TRANSFER:
/* A method call (invocation) -- transfer control */
status = AE_CTRL_TRANSFER;
walk_state->prev_op = op;
walk_state->method_call_op = op;
walk_state->method_call_node = (op->common.value.arg)->common.node;
/* Will return value (if any) be used by the caller? */
walk_state->return_used = acpi_ds_is_result_used (op, walk_state);
break;
default:
status = callback_status;
if ((callback_status & AE_CODE_MASK) == AE_CODE_CONTROL) {
status = AE_OK;
}
break;
}
return_ACPI_STATUS (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_parse_loop
*
* PARAMETERS: walk_state - Current state
*
* RETURN: Status
*
* DESCRIPTION: Parse AML (pointed to by the current parser state) and return
* a tree of ops.
*
******************************************************************************/
static acpi_status
acpi_ps_parse_loop (
struct acpi_walk_state *walk_state)
{
acpi_status status = AE_OK;
union acpi_parse_object *op = NULL; /* current op */
union acpi_parse_object *arg = NULL;
union acpi_parse_object *pre_op = NULL;
struct acpi_parse_state *parser_state;
u8 *aml_op_start = NULL;
ACPI_FUNCTION_TRACE_PTR ("ps_parse_loop", walk_state);
if (walk_state->descending_callback == NULL) {
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
parser_state = &walk_state->parser_state;
walk_state->arg_types = 0;
#if (!defined (ACPI_NO_METHOD_EXECUTION) && !defined (ACPI_CONSTANT_EVAL_ONLY))
if (walk_state->walk_type & ACPI_WALK_METHOD_RESTART) {
/* We are restarting a preempted control method */
if (acpi_ps_has_completed_scope (parser_state)) {
/*
* We must check if a predicate to an IF or WHILE statement
* was just completed
*/
if ((parser_state->scope->parse_scope.op) &&
((parser_state->scope->parse_scope.op->common.aml_opcode == AML_IF_OP) ||
(parser_state->scope->parse_scope.op->common.aml_opcode == AML_WHILE_OP)) &&
(walk_state->control_state) &&
(walk_state->control_state->common.state ==
ACPI_CONTROL_PREDICATE_EXECUTING)) {
/*
* A predicate was just completed, get the value of the
* predicate and branch based on that value
*/
walk_state->op = NULL;
status = acpi_ds_get_predicate_value (walk_state, ACPI_TO_POINTER (TRUE));
if (ACPI_FAILURE (status) &&
((status & AE_CODE_MASK) != AE_CODE_CONTROL)) {
if (status == AE_AML_NO_RETURN_VALUE) {
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Invoked method did not return a value, %s\n",
acpi_format_exception (status)));
}
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"get_predicate Failed, %s\n",
acpi_format_exception (status)));
return_ACPI_STATUS (status);
}
status = acpi_ps_next_parse_state (walk_state, op, status);
}
acpi_ps_pop_scope (parser_state, &op,
&walk_state->arg_types, &walk_state->arg_count);
ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "Popped scope, Op=%p\n", op));
}
else if (walk_state->prev_op) {
/* We were in the middle of an op */
op = walk_state->prev_op;
walk_state->arg_types = walk_state->prev_arg_types;
}
}
#endif
/* Iterative parsing loop, while there is more AML to process: */
while ((parser_state->aml < parser_state->aml_end) || (op)) {
aml_op_start = parser_state->aml;
if (!op) {
/* Get the next opcode from the AML stream */
walk_state->aml_offset = (u32) ACPI_PTR_DIFF (parser_state->aml,
parser_state->aml_start);
walk_state->opcode = acpi_ps_peek_opcode (parser_state);
/*
* First cut to determine what we have found:
* 1) A valid AML opcode
* 2) A name string
* 3) An unknown/invalid opcode
*/
walk_state->op_info = acpi_ps_get_opcode_info (walk_state->opcode);
switch (walk_state->op_info->class) {
case AML_CLASS_ASCII:
case AML_CLASS_PREFIX:
/*
* Starts with a valid prefix or ASCII char, this is a name
* string. Convert the bare name string to a namepath.
*/
walk_state->opcode = AML_INT_NAMEPATH_OP;
walk_state->arg_types = ARGP_NAMESTRING;
break;
case AML_CLASS_UNKNOWN:
/* The opcode is unrecognized. Just skip unknown opcodes */
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Found unknown opcode %X at AML address %p offset %X, ignoring\n",
walk_state->opcode, parser_state->aml, walk_state->aml_offset));
ACPI_DUMP_BUFFER (parser_state->aml, 128);
/* Assume one-byte bad opcode */
parser_state->aml++;
continue;
default:
/* Found opcode info, this is a normal opcode */
parser_state->aml += acpi_ps_get_opcode_size (walk_state->opcode);
walk_state->arg_types = walk_state->op_info->parse_args;
break;
}
/* Create Op structure and append to parent's argument list */
if (walk_state->op_info->flags & AML_NAMED) {
/* Allocate a new pre_op if necessary */
if (!pre_op) {
pre_op = acpi_ps_alloc_op (walk_state->opcode);
if (!pre_op) {
status = AE_NO_MEMORY;
goto close_this_op;
}
}
pre_op->common.value.arg = NULL;
pre_op->common.aml_opcode = walk_state->opcode;
/*
* Get and append arguments until we find the node that contains
* the name (the type ARGP_NAME).
*/
while (GET_CURRENT_ARG_TYPE (walk_state->arg_types) &&
(GET_CURRENT_ARG_TYPE (walk_state->arg_types) != ARGP_NAME)) {
status = acpi_ps_get_next_arg (walk_state, parser_state,
GET_CURRENT_ARG_TYPE (walk_state->arg_types), &arg);
if (ACPI_FAILURE (status)) {
goto close_this_op;
}
acpi_ps_append_arg (pre_op, arg);
INCREMENT_ARG_LIST (walk_state->arg_types);
}
/*
* Make sure that we found a NAME and didn't run out of
* arguments
*/
if (!GET_CURRENT_ARG_TYPE (walk_state->arg_types)) {
status = AE_AML_NO_OPERAND;
goto close_this_op;
}
/* We know that this arg is a name, move to next arg */
INCREMENT_ARG_LIST (walk_state->arg_types);
/*
* Find the object. This will either insert the object into
* the namespace or simply look it up
*/
walk_state->op = NULL;
status = walk_state->descending_callback (walk_state, &op);
if (ACPI_FAILURE (status)) {
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"During name lookup/catalog, %s\n",
acpi_format_exception (status)));
goto close_this_op;
}
if (!op) {
continue;
}
status = acpi_ps_next_parse_state (walk_state, op, status);
if (status == AE_CTRL_PENDING) {
status = AE_OK;
goto close_this_op;
}
if (ACPI_FAILURE (status)) {
goto close_this_op;
}
acpi_ps_append_arg (op, pre_op->common.value.arg);
acpi_gbl_depth++;
if (op->common.aml_opcode == AML_REGION_OP) {
/*
* Defer final parsing of an operation_region body,
* because we don't have enough info in the first pass
* to parse it correctly (i.e., there may be method
* calls within the term_arg elements of the body.)
*
* However, we must continue parsing because
* the opregion is not a standalone package --
* we don't know where the end is at this point.
*
* (Length is unknown until parse of the body complete)
*/
op->named.data = aml_op_start;
op->named.length = 0;
}
}
else {
/* Not a named opcode, just allocate Op and append to parent */
walk_state->op_info = acpi_ps_get_opcode_info (walk_state->opcode);
op = acpi_ps_alloc_op (walk_state->opcode);
if (!op) {
status = AE_NO_MEMORY;
goto close_this_op;
}
if (walk_state->op_info->flags & AML_CREATE) {
/*
* Backup to beginning of create_xXXfield declaration
* body_length is unknown until we parse the body
*/
op->named.data = aml_op_start;
op->named.length = 0;
}
acpi_ps_append_arg (acpi_ps_get_parent_scope (parser_state), op);
if ((walk_state->descending_callback != NULL)) {
/*
* Find the object. This will either insert the object into
* the namespace or simply look it up
*/
walk_state->op = op;
status = walk_state->descending_callback (walk_state, &op);
status = acpi_ps_next_parse_state (walk_state, op, status);
if (status == AE_CTRL_PENDING) {
status = AE_OK;
goto close_this_op;
}
if (ACPI_FAILURE (status)) {
goto close_this_op;
}
}
}
op->common.aml_offset = walk_state->aml_offset;
if (walk_state->op_info) {
ACPI_DEBUG_PRINT ((ACPI_DB_PARSE,
"Opcode %4.4X [%s] Op %p Aml %p aml_offset %5.5X\n",
(u32) op->common.aml_opcode, walk_state->op_info->name,
op, parser_state->aml, op->common.aml_offset));
}
}
/*
* Start arg_count at zero because we don't know if there are
* any args yet
*/
walk_state->arg_count = 0;
/* Are there any arguments that must be processed? */
if (walk_state->arg_types) {
/* Get arguments */
switch (op->common.aml_opcode) {
case AML_BYTE_OP: /* AML_BYTEDATA_ARG */
case AML_WORD_OP: /* AML_WORDDATA_ARG */
case AML_DWORD_OP: /* AML_DWORDATA_ARG */
case AML_QWORD_OP: /* AML_QWORDATA_ARG */
case AML_STRING_OP: /* AML_ASCIICHARLIST_ARG */
/* Fill in constant or string argument directly */
acpi_ps_get_next_simple_arg (parser_state,
GET_CURRENT_ARG_TYPE (walk_state->arg_types), op);
break;
case AML_INT_NAMEPATH_OP: /* AML_NAMESTRING_ARG */
status = acpi_ps_get_next_namepath (walk_state, parser_state, op, 1);
if (ACPI_FAILURE (status)) {
goto close_this_op;
}
walk_state->arg_types = 0;
break;
default:
/*
* Op is not a constant or string, append each argument
* to the Op
*/
while (GET_CURRENT_ARG_TYPE (walk_state->arg_types) &&
!walk_state->arg_count) {
walk_state->aml_offset = (u32)
ACPI_PTR_DIFF (parser_state->aml, parser_state->aml_start);
status = acpi_ps_get_next_arg (walk_state, parser_state,
GET_CURRENT_ARG_TYPE (walk_state->arg_types),
&arg);
if (ACPI_FAILURE (status)) {
goto close_this_op;
}
if (arg) {
arg->common.aml_offset = walk_state->aml_offset;
acpi_ps_append_arg (op, arg);
}
INCREMENT_ARG_LIST (walk_state->arg_types);
}
/* Special processing for certain opcodes */
switch (op->common.aml_opcode) {
case AML_METHOD_OP:
/*
* Skip parsing of control method
* because we don't have enough info in the first pass
* to parse it correctly.
*
* Save the length and address of the body
*/
op->named.data = parser_state->aml;
op->named.length = (u32) (parser_state->pkg_end -
parser_state->aml);
/* Skip body of method */
parser_state->aml = parser_state->pkg_end;
walk_state->arg_count = 0;
break;
case AML_BUFFER_OP:
case AML_PACKAGE_OP:
case AML_VAR_PACKAGE_OP:
if ((op->common.parent) &&
(op->common.parent->common.aml_opcode == AML_NAME_OP) &&
(walk_state->descending_callback != acpi_ds_exec_begin_op)) {
/*
* Skip parsing of Buffers and Packages
* because we don't have enough info in the first pass
* to parse them correctly.
*/
op->named.data = aml_op_start;
op->named.length = (u32) (parser_state->pkg_end -
aml_op_start);
/* Skip body */
parser_state->aml = parser_state->pkg_end;
walk_state->arg_count = 0;
}
break;
case AML_WHILE_OP:
if (walk_state->control_state) {
walk_state->control_state->control.package_end =
parser_state->pkg_end;
}
break;
default:
/* No action for all other opcodes */
break;
}
break;
}
}
/* Check for arguments that need to be processed */
if (walk_state->arg_count) {
/*
* There are arguments (complex ones), push Op and
* prepare for argument
*/
status = acpi_ps_push_scope (parser_state, op,
walk_state->arg_types, walk_state->arg_count);
if (ACPI_FAILURE (status)) {
goto close_this_op;
}
op = NULL;
continue;
}
/*
* All arguments have been processed -- Op is complete,
* prepare for next
*/
walk_state->op_info = acpi_ps_get_opcode_info (op->common.aml_opcode);
if (walk_state->op_info->flags & AML_NAMED) {
if (acpi_gbl_depth) {
acpi_gbl_depth--;
}
if (op->common.aml_opcode == AML_REGION_OP) {
/*
* Skip parsing of control method or opregion body,
* because we don't have enough info in the first pass
* to parse them correctly.
*
* Completed parsing an op_region declaration, we now
* know the length.
*/
op->named.length = (u32) (parser_state->aml - op->named.data);
}
}
if (walk_state->op_info->flags & AML_CREATE) {
/*
* Backup to beginning of create_xXXfield declaration (1 for
* Opcode)
*
* body_length is unknown until we parse the body
*/
op->named.length = (u32) (parser_state->aml - op->named.data);
}
/* This op complete, notify the dispatcher */
if (walk_state->ascending_callback != NULL) {
walk_state->op = op;
walk_state->opcode = op->common.aml_opcode;
status = walk_state->ascending_callback (walk_state);
status = acpi_ps_next_parse_state (walk_state, op, status);
if (status == AE_CTRL_PENDING) {
status = AE_OK;
goto close_this_op;
}
}
close_this_op:
/*
* Finished one argument of the containing scope
*/
parser_state->scope->parse_scope.arg_count--;
/* Close this Op (will result in parse subtree deletion) */
acpi_ps_complete_this_op (walk_state, op);
op = NULL;
if (pre_op) {
acpi_ps_free_op (pre_op);
pre_op = NULL;
}
switch (status) {
case AE_OK:
break;
case AE_CTRL_TRANSFER:
/* We are about to transfer to a called method. */
walk_state->prev_op = op;
walk_state->prev_arg_types = walk_state->arg_types;
return_ACPI_STATUS (status);
case AE_CTRL_END:
acpi_ps_pop_scope (parser_state, &op,
&walk_state->arg_types, &walk_state->arg_count);
if (op) {
walk_state->op = op;
walk_state->op_info = acpi_ps_get_opcode_info (op->common.aml_opcode);
walk_state->opcode = op->common.aml_opcode;
status = walk_state->ascending_callback (walk_state);
status = acpi_ps_next_parse_state (walk_state, op, status);
acpi_ps_complete_this_op (walk_state, op);
op = NULL;
}
status = AE_OK;
break;
case AE_CTRL_BREAK:
case AE_CTRL_CONTINUE:
/* Pop off scopes until we find the While */
while (!op || (op->common.aml_opcode != AML_WHILE_OP)) {
acpi_ps_pop_scope (parser_state, &op,
&walk_state->arg_types, &walk_state->arg_count);
}
/* Close this iteration of the While loop */
walk_state->op = op;
walk_state->op_info = acpi_ps_get_opcode_info (op->common.aml_opcode);
walk_state->opcode = op->common.aml_opcode;
status = walk_state->ascending_callback (walk_state);
status = acpi_ps_next_parse_state (walk_state, op, status);
acpi_ps_complete_this_op (walk_state, op);
op = NULL;
status = AE_OK;
break;
case AE_CTRL_TERMINATE:
status = AE_OK;
/* Clean up */
do {
if (op) {
acpi_ps_complete_this_op (walk_state, op);
}
acpi_ps_pop_scope (parser_state, &op,
&walk_state->arg_types, &walk_state->arg_count);
} while (op);
return_ACPI_STATUS (status);
default: /* All other non-AE_OK status */
do {
if (op) {
acpi_ps_complete_this_op (walk_state, op);
}
acpi_ps_pop_scope (parser_state, &op,
&walk_state->arg_types, &walk_state->arg_count);
} while (op);
/*
* TBD: Cleanup parse ops on error
*/
#if 0
if (op == NULL) {
acpi_ps_pop_scope (parser_state, &op,
&walk_state->arg_types, &walk_state->arg_count);
}
#endif
walk_state->prev_op = op;
walk_state->prev_arg_types = walk_state->arg_types;
return_ACPI_STATUS (status);
}
/* This scope complete? */
if (acpi_ps_has_completed_scope (parser_state)) {
acpi_ps_pop_scope (parser_state, &op,
&walk_state->arg_types, &walk_state->arg_count);
ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "Popped scope, Op=%p\n", op));
}
else {
op = NULL;
}
} /* while parser_state->Aml */
/*
* Complete the last Op (if not completed), and clear the scope stack.
* It is easily possible to end an AML "package" with an unbounded number
* of open scopes (such as when several ASL blocks are closed with
* sequential closing braces). We want to terminate each one cleanly.
*/
ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "AML package complete at Op %p\n", op));
do {
if (op) {
if (walk_state->ascending_callback != NULL) {
walk_state->op = op;
walk_state->op_info = acpi_ps_get_opcode_info (op->common.aml_opcode);
walk_state->opcode = op->common.aml_opcode;
status = walk_state->ascending_callback (walk_state);
status = acpi_ps_next_parse_state (walk_state, op, status);
if (status == AE_CTRL_PENDING) {
status = AE_OK;
goto close_this_op;
}
if (status == AE_CTRL_TERMINATE) {
status = AE_OK;
/* Clean up */
do {
if (op) {
acpi_ps_complete_this_op (walk_state, op);
}
acpi_ps_pop_scope (parser_state, &op,
&walk_state->arg_types, &walk_state->arg_count);
} while (op);
return_ACPI_STATUS (status);
}
else if (ACPI_FAILURE (status)) {
acpi_ps_complete_this_op (walk_state, op);
return_ACPI_STATUS (status);
}
}
acpi_ps_complete_this_op (walk_state, op);
}
acpi_ps_pop_scope (parser_state, &op, &walk_state->arg_types,
&walk_state->arg_count);
} while (op);
return_ACPI_STATUS (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_parse_aml
*
* PARAMETERS: walk_state - Current state
*
*
* RETURN: Status
*
* DESCRIPTION: Parse raw AML and return a tree of ops
*
******************************************************************************/
acpi_status
acpi_ps_parse_aml (
struct acpi_walk_state *walk_state)
{
acpi_status status;
acpi_status terminate_status;
struct acpi_thread_state *thread;
struct acpi_thread_state *prev_walk_list = acpi_gbl_current_walk_list;
struct acpi_walk_state *previous_walk_state;
ACPI_FUNCTION_TRACE ("ps_parse_aml");
ACPI_DEBUG_PRINT ((ACPI_DB_PARSE,
"Entered with walk_state=%p Aml=%p size=%X\n",
walk_state, walk_state->parser_state.aml,
walk_state->parser_state.aml_size));
/* Create and initialize a new thread state */
thread = acpi_ut_create_thread_state ();
if (!thread) {
return_ACPI_STATUS (AE_NO_MEMORY);
}
walk_state->thread = thread;
acpi_ds_push_walk_state (walk_state, thread);
/*
* This global allows the AML debugger to get a handle to the currently
* executing control method.
*/
acpi_gbl_current_walk_list = thread;
/*
* Execute the walk loop as long as there is a valid Walk State. This
* handles nested control method invocations without recursion.
*/
ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "State=%p\n", walk_state));
status = AE_OK;
while (walk_state) {
if (ACPI_SUCCESS (status)) {
/*
* The parse_loop executes AML until the method terminates
* or calls another method.
*/
status = acpi_ps_parse_loop (walk_state);
}
ACPI_DEBUG_PRINT ((ACPI_DB_PARSE,
"Completed one call to walk loop, %s State=%p\n",
acpi_format_exception (status), walk_state));
if (status == AE_CTRL_TRANSFER) {
/*
* A method call was detected.
* Transfer control to the called control method
*/
status = acpi_ds_call_control_method (thread, walk_state, NULL);
/*
* If the transfer to the new method method call worked, a new walk
* state was created -- get it
*/
walk_state = acpi_ds_get_current_walk_state (thread);
continue;
}
else if (status == AE_CTRL_TERMINATE) {
status = AE_OK;
}
else if ((status != AE_OK) && (walk_state->method_desc)) {
ACPI_REPORT_METHOD_ERROR ("Method execution failed",
walk_state->method_node, NULL, status);
/* Check for possible multi-thread reentrancy problem */
if ((status == AE_ALREADY_EXISTS) &&
(!walk_state->method_desc->method.semaphore)) {
/*
* This method is marked not_serialized, but it tried to create
* a named object, causing the second thread entrance to fail.
* We will workaround this by marking the method permanently
* as Serialized.
*/
walk_state->method_desc->method.method_flags |= AML_METHOD_SERIALIZED;
walk_state->method_desc->method.concurrency = 1;
}
}
if (walk_state->method_desc) {
/* Decrement the thread count on the method parse tree */
if (walk_state->method_desc->method.thread_count) {
walk_state->method_desc->method.thread_count--;
}
}
/* We are done with this walk, move on to the parent if any */
walk_state = acpi_ds_pop_walk_state (thread);
/* Reset the current scope to the beginning of scope stack */
acpi_ds_scope_stack_clear (walk_state);
/*
* If we just returned from the execution of a control method,
* there's lots of cleanup to do
*/
if ((walk_state->parse_flags & ACPI_PARSE_MODE_MASK) == ACPI_PARSE_EXECUTE) {
terminate_status = acpi_ds_terminate_control_method (walk_state);
if (ACPI_FAILURE (terminate_status)) {
ACPI_REPORT_ERROR ((
"Could not terminate control method properly\n"));
/* Ignore error and continue */
}
}
/* Delete this walk state and all linked control states */
acpi_ps_cleanup_scope (&walk_state->parser_state);
previous_walk_state = walk_state;
ACPI_DEBUG_PRINT ((ACPI_DB_PARSE,
"return_value=%p, implicit_value=%p State=%p\n",
walk_state->return_desc, walk_state->implicit_return_obj, walk_state));
/* Check if we have restarted a preempted walk */
walk_state = acpi_ds_get_current_walk_state (thread);
if (walk_state) {
if (ACPI_SUCCESS (status)) {
/*
* There is another walk state, restart it.
* If the method return value is not used by the parent,
* The object is deleted
*/
if (!previous_walk_state->return_desc) {
status = acpi_ds_restart_control_method (walk_state,
previous_walk_state->implicit_return_obj);
}
else {
/*
* We have a valid return value, delete any implicit
* return value.
*/
acpi_ds_clear_implicit_return (previous_walk_state);
status = acpi_ds_restart_control_method (walk_state,
previous_walk_state->return_desc);
}
if (ACPI_SUCCESS (status)) {
walk_state->walk_type |= ACPI_WALK_METHOD_RESTART;
}
}
else {
/* On error, delete any return object */
acpi_ut_remove_reference (previous_walk_state->return_desc);
}
}
/*
* Just completed a 1st-level method, save the final internal return
* value (if any)
*/
else if (previous_walk_state->caller_return_desc) {
if (previous_walk_state->implicit_return_obj) {
*(previous_walk_state->caller_return_desc) =
previous_walk_state->implicit_return_obj;
}
else {
/* NULL if no return value */
*(previous_walk_state->caller_return_desc) =
previous_walk_state->return_desc;
}
}
else {
if (previous_walk_state->return_desc) {
/* Caller doesn't want it, must delete it */
acpi_ut_remove_reference (previous_walk_state->return_desc);
}
if (previous_walk_state->implicit_return_obj) {
/* Caller doesn't want it, must delete it */
acpi_ut_remove_reference (previous_walk_state->implicit_return_obj);
}
}
acpi_ds_delete_walk_state (previous_walk_state);
}
/* Normal exit */
acpi_ex_release_all_mutexes (thread);
acpi_ut_delete_generic_state (ACPI_CAST_PTR (union acpi_generic_state, thread));
acpi_gbl_current_walk_list = prev_walk_list;
return_ACPI_STATUS (status);
}
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку