WSL2-Linux-Kernel/drivers/cpufreq/cpufreq-nforce2.c

442 строки
9.0 KiB
C

/*
* (C) 2004-2006 Sebastian Witt <se.witt@gmx.net>
*
* Licensed under the terms of the GNU GPL License version 2.
* Based upon reverse engineered information
*
* BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/pci.h>
#include <linux/delay.h>
#define NFORCE2_XTAL 25
#define NFORCE2_BOOTFSB 0x48
#define NFORCE2_PLLENABLE 0xa8
#define NFORCE2_PLLREG 0xa4
#define NFORCE2_PLLADR 0xa0
#define NFORCE2_PLL(mul, div) (0x100000 | (mul << 8) | div)
#define NFORCE2_MIN_FSB 50
#define NFORCE2_SAFE_DISTANCE 50
/* Delay in ms between FSB changes */
/* #define NFORCE2_DELAY 10 */
/*
* nforce2_chipset:
* FSB is changed using the chipset
*/
static struct pci_dev *nforce2_dev;
/* fid:
* multiplier * 10
*/
static int fid;
/* min_fsb, max_fsb:
* minimum and maximum FSB (= FSB at boot time)
*/
static int min_fsb;
static int max_fsb;
MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver");
MODULE_LICENSE("GPL");
module_param(fid, int, 0444);
module_param(min_fsb, int, 0444);
MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)");
MODULE_PARM_DESC(min_fsb,
"Minimum FSB to use, if not defined: current FSB - 50");
/**
* nforce2_calc_fsb - calculate FSB
* @pll: PLL value
*
* Calculates FSB from PLL value
*/
static int nforce2_calc_fsb(int pll)
{
unsigned char mul, div;
mul = (pll >> 8) & 0xff;
div = pll & 0xff;
if (div > 0)
return NFORCE2_XTAL * mul / div;
return 0;
}
/**
* nforce2_calc_pll - calculate PLL value
* @fsb: FSB
*
* Calculate PLL value for given FSB
*/
static int nforce2_calc_pll(unsigned int fsb)
{
unsigned char xmul, xdiv;
unsigned char mul = 0, div = 0;
int tried = 0;
/* Try to calculate multiplier and divider up to 4 times */
while (((mul == 0) || (div == 0)) && (tried <= 3)) {
for (xdiv = 2; xdiv <= 0x80; xdiv++)
for (xmul = 1; xmul <= 0xfe; xmul++)
if (nforce2_calc_fsb(NFORCE2_PLL(xmul, xdiv)) ==
fsb + tried) {
mul = xmul;
div = xdiv;
}
tried++;
}
if ((mul == 0) || (div == 0))
return -1;
return NFORCE2_PLL(mul, div);
}
/**
* nforce2_write_pll - write PLL value to chipset
* @pll: PLL value
*
* Writes new FSB PLL value to chipset
*/
static void nforce2_write_pll(int pll)
{
int temp;
/* Set the pll addr. to 0x00 */
pci_write_config_dword(nforce2_dev, NFORCE2_PLLADR, 0);
/* Now write the value in all 64 registers */
for (temp = 0; temp <= 0x3f; temp++)
pci_write_config_dword(nforce2_dev, NFORCE2_PLLREG, pll);
return;
}
/**
* nforce2_fsb_read - Read FSB
*
* Read FSB from chipset
* If bootfsb != 0, return FSB at boot-time
*/
static unsigned int nforce2_fsb_read(int bootfsb)
{
struct pci_dev *nforce2_sub5;
u32 fsb, temp = 0;
/* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */
nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, 0x01EF,
PCI_ANY_ID, PCI_ANY_ID, NULL);
if (!nforce2_sub5)
return 0;
pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb);
fsb /= 1000000;
/* Check if PLL register is already set */
pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
if (bootfsb || !temp)
return fsb;
/* Use PLL register FSB value */
pci_read_config_dword(nforce2_dev, NFORCE2_PLLREG, &temp);
fsb = nforce2_calc_fsb(temp);
return fsb;
}
/**
* nforce2_set_fsb - set new FSB
* @fsb: New FSB
*
* Sets new FSB
*/
static int nforce2_set_fsb(unsigned int fsb)
{
u32 temp = 0;
unsigned int tfsb;
int diff;
int pll = 0;
if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) {
pr_err("FSB %d is out of range!\n", fsb);
return -EINVAL;
}
tfsb = nforce2_fsb_read(0);
if (!tfsb) {
pr_err("Error while reading the FSB\n");
return -EINVAL;
}
/* First write? Then set actual value */
pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
if (!temp) {
pll = nforce2_calc_pll(tfsb);
if (pll < 0)
return -EINVAL;
nforce2_write_pll(pll);
}
/* Enable write access */
temp = 0x01;
pci_write_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8)temp);
diff = tfsb - fsb;
if (!diff)
return 0;
while ((tfsb != fsb) && (tfsb <= max_fsb) && (tfsb >= min_fsb)) {
if (diff < 0)
tfsb++;
else
tfsb--;
/* Calculate the PLL reg. value */
pll = nforce2_calc_pll(tfsb);
if (pll == -1)
return -EINVAL;
nforce2_write_pll(pll);
#ifdef NFORCE2_DELAY
mdelay(NFORCE2_DELAY);
#endif
}
temp = 0x40;
pci_write_config_byte(nforce2_dev, NFORCE2_PLLADR, (u8)temp);
return 0;
}
/**
* nforce2_get - get the CPU frequency
* @cpu: CPU number
*
* Returns the CPU frequency
*/
static unsigned int nforce2_get(unsigned int cpu)
{
if (cpu)
return 0;
return nforce2_fsb_read(0) * fid * 100;
}
/**
* nforce2_target - set a new CPUFreq policy
* @policy: new policy
* @target_freq: the target frequency
* @relation: how that frequency relates to achieved frequency
* (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
*
* Sets a new CPUFreq policy.
*/
static int nforce2_target(struct cpufreq_policy *policy,
unsigned int target_freq, unsigned int relation)
{
/* unsigned long flags; */
struct cpufreq_freqs freqs;
unsigned int target_fsb;
if ((target_freq > policy->max) || (target_freq < policy->min))
return -EINVAL;
target_fsb = target_freq / (fid * 100);
freqs.old = nforce2_get(policy->cpu);
freqs.new = target_fsb * fid * 100;
if (freqs.old == freqs.new)
return 0;
pr_debug("Old CPU frequency %d kHz, new %d kHz\n",
freqs.old, freqs.new);
cpufreq_freq_transition_begin(policy, &freqs);
/* Disable IRQs */
/* local_irq_save(flags); */
if (nforce2_set_fsb(target_fsb) < 0)
pr_err("Changing FSB to %d failed\n", target_fsb);
else
pr_debug("Changed FSB successfully to %d\n",
target_fsb);
/* Enable IRQs */
/* local_irq_restore(flags); */
cpufreq_freq_transition_end(policy, &freqs, 0);
return 0;
}
/**
* nforce2_verify - verifies a new CPUFreq policy
* @policy: new policy
*/
static int nforce2_verify(struct cpufreq_policy *policy)
{
unsigned int fsb_pol_max;
fsb_pol_max = policy->max / (fid * 100);
if (policy->min < (fsb_pol_max * fid * 100))
policy->max = (fsb_pol_max + 1) * fid * 100;
cpufreq_verify_within_cpu_limits(policy);
return 0;
}
static int nforce2_cpu_init(struct cpufreq_policy *policy)
{
unsigned int fsb;
unsigned int rfid;
/* capability check */
if (policy->cpu != 0)
return -ENODEV;
/* Get current FSB */
fsb = nforce2_fsb_read(0);
if (!fsb)
return -EIO;
/* FIX: Get FID from CPU */
if (!fid) {
if (!cpu_khz) {
pr_warn("cpu_khz not set, can't calculate multiplier!\n");
return -ENODEV;
}
fid = cpu_khz / (fsb * 100);
rfid = fid % 5;
if (rfid) {
if (rfid > 2)
fid += 5 - rfid;
else
fid -= rfid;
}
}
pr_info("FSB currently at %i MHz, FID %d.%d\n",
fsb, fid / 10, fid % 10);
/* Set maximum FSB to FSB at boot time */
max_fsb = nforce2_fsb_read(1);
if (!max_fsb)
return -EIO;
if (!min_fsb)
min_fsb = max_fsb - NFORCE2_SAFE_DISTANCE;
if (min_fsb < NFORCE2_MIN_FSB)
min_fsb = NFORCE2_MIN_FSB;
/* cpuinfo and default policy values */
policy->min = policy->cpuinfo.min_freq = min_fsb * fid * 100;
policy->max = policy->cpuinfo.max_freq = max_fsb * fid * 100;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
return 0;
}
static int nforce2_cpu_exit(struct cpufreq_policy *policy)
{
return 0;
}
static struct cpufreq_driver nforce2_driver = {
.name = "nforce2",
.verify = nforce2_verify,
.target = nforce2_target,
.get = nforce2_get,
.init = nforce2_cpu_init,
.exit = nforce2_cpu_exit,
};
#ifdef MODULE
static const struct pci_device_id nforce2_ids[] = {
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2 },
{}
};
MODULE_DEVICE_TABLE(pci, nforce2_ids);
#endif
/**
* nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic
*
* Detects nForce2 A2 and C1 stepping
*
*/
static int nforce2_detect_chipset(void)
{
nforce2_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
PCI_DEVICE_ID_NVIDIA_NFORCE2,
PCI_ANY_ID, PCI_ANY_ID, NULL);
if (nforce2_dev == NULL)
return -ENODEV;
pr_info("Detected nForce2 chipset revision %X\n",
nforce2_dev->revision);
pr_info("FSB changing is maybe unstable and can lead to crashes and data loss\n");
return 0;
}
/**
* nforce2_init - initializes the nForce2 CPUFreq driver
*
* Initializes the nForce2 FSB support. Returns -ENODEV on unsupported
* devices, -EINVAL on problems during initialization, and zero on
* success.
*/
static int __init nforce2_init(void)
{
/* TODO: do we need to detect the processor? */
/* detect chipset */
if (nforce2_detect_chipset()) {
pr_info("No nForce2 chipset\n");
return -ENODEV;
}
return cpufreq_register_driver(&nforce2_driver);
}
/**
* nforce2_exit - unregisters cpufreq module
*
* Unregisters nForce2 FSB change support.
*/
static void __exit nforce2_exit(void)
{
cpufreq_unregister_driver(&nforce2_driver);
}
module_init(nforce2_init);
module_exit(nforce2_exit);