271 строка
7.6 KiB
C
271 строка
7.6 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2018 Marvell
|
|
*
|
|
* Authors:
|
|
* Igal Liberman <igall@marvell.com>
|
|
* Miquèl Raynal <miquel.raynal@bootlin.com>
|
|
*
|
|
* Marvell A3700 UTMI PHY driver
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/* Armada 3700 UTMI PHY registers */
|
|
#define USB2_PHY_PLL_CTRL_REG0 0x0
|
|
#define PLL_REF_DIV_OFF 0
|
|
#define PLL_REF_DIV_MASK GENMASK(6, 0)
|
|
#define PLL_REF_DIV_5 5
|
|
#define PLL_FB_DIV_OFF 16
|
|
#define PLL_FB_DIV_MASK GENMASK(24, 16)
|
|
#define PLL_FB_DIV_96 96
|
|
#define PLL_SEL_LPFR_OFF 28
|
|
#define PLL_SEL_LPFR_MASK GENMASK(29, 28)
|
|
#define PLL_READY BIT(31)
|
|
#define USB2_PHY_CAL_CTRL 0x8
|
|
#define PHY_PLLCAL_DONE BIT(31)
|
|
#define PHY_IMPCAL_DONE BIT(23)
|
|
#define USB2_RX_CHAN_CTRL1 0x18
|
|
#define USB2PHY_SQCAL_DONE BIT(31)
|
|
#define USB2_PHY_OTG_CTRL 0x34
|
|
#define PHY_PU_OTG BIT(4)
|
|
#define USB2_PHY_CHRGR_DETECT 0x38
|
|
#define PHY_CDP_EN BIT(2)
|
|
#define PHY_DCP_EN BIT(3)
|
|
#define PHY_PD_EN BIT(4)
|
|
#define PHY_PU_CHRG_DTC BIT(5)
|
|
#define PHY_CDP_DM_AUTO BIT(7)
|
|
#define PHY_ENSWITCH_DP BIT(12)
|
|
#define PHY_ENSWITCH_DM BIT(13)
|
|
|
|
/* Armada 3700 USB miscellaneous registers */
|
|
#define USB2_PHY_CTRL(usb32) (usb32 ? 0x20 : 0x4)
|
|
#define RB_USB2PHY_PU BIT(0)
|
|
#define USB2_DP_PULLDN_DEV_MODE BIT(5)
|
|
#define USB2_DM_PULLDN_DEV_MODE BIT(6)
|
|
#define RB_USB2PHY_SUSPM(usb32) (usb32 ? BIT(14) : BIT(7))
|
|
|
|
#define PLL_LOCK_DELAY_US 10000
|
|
#define PLL_LOCK_TIMEOUT_US 1000000
|
|
|
|
/**
|
|
* struct mvebu_a3700_utmi_caps - PHY capabilities
|
|
*
|
|
* @usb32: Flag indicating which PHY is in use (impacts the register map):
|
|
* - The UTMI PHY wired to the USB3/USB2 controller (otg)
|
|
* - The UTMI PHY wired to the USB2 controller (host only)
|
|
* @ops: PHY operations
|
|
*/
|
|
struct mvebu_a3700_utmi_caps {
|
|
int usb32;
|
|
const struct phy_ops *ops;
|
|
};
|
|
|
|
/**
|
|
* struct mvebu_a3700_utmi - PHY driver data
|
|
*
|
|
* @regs: PHY registers
|
|
* @usb_misc: Regmap with USB miscellaneous registers including PHY ones
|
|
* @caps: PHY capabilities
|
|
* @phy: PHY handle
|
|
*/
|
|
struct mvebu_a3700_utmi {
|
|
void __iomem *regs;
|
|
struct regmap *usb_misc;
|
|
const struct mvebu_a3700_utmi_caps *caps;
|
|
struct phy *phy;
|
|
};
|
|
|
|
static int mvebu_a3700_utmi_phy_power_on(struct phy *phy)
|
|
{
|
|
struct mvebu_a3700_utmi *utmi = phy_get_drvdata(phy);
|
|
struct device *dev = &phy->dev;
|
|
int usb32 = utmi->caps->usb32;
|
|
int ret = 0;
|
|
u32 reg;
|
|
|
|
/*
|
|
* Setup PLL. 40MHz clock used to be the default, being 25MHz now.
|
|
* See "PLL Settings for Typical REFCLK" table.
|
|
*/
|
|
reg = readl(utmi->regs + USB2_PHY_PLL_CTRL_REG0);
|
|
reg &= ~(PLL_REF_DIV_MASK | PLL_FB_DIV_MASK | PLL_SEL_LPFR_MASK);
|
|
reg |= (PLL_REF_DIV_5 << PLL_REF_DIV_OFF) |
|
|
(PLL_FB_DIV_96 << PLL_FB_DIV_OFF);
|
|
writel(reg, utmi->regs + USB2_PHY_PLL_CTRL_REG0);
|
|
|
|
/* Enable PHY pull up and disable USB2 suspend */
|
|
regmap_update_bits(utmi->usb_misc, USB2_PHY_CTRL(usb32),
|
|
RB_USB2PHY_SUSPM(usb32) | RB_USB2PHY_PU,
|
|
RB_USB2PHY_SUSPM(usb32) | RB_USB2PHY_PU);
|
|
|
|
if (usb32) {
|
|
/* Power up OTG module */
|
|
reg = readl(utmi->regs + USB2_PHY_OTG_CTRL);
|
|
reg |= PHY_PU_OTG;
|
|
writel(reg, utmi->regs + USB2_PHY_OTG_CTRL);
|
|
|
|
/* Disable PHY charger detection */
|
|
reg = readl(utmi->regs + USB2_PHY_CHRGR_DETECT);
|
|
reg &= ~(PHY_CDP_EN | PHY_DCP_EN | PHY_PD_EN | PHY_PU_CHRG_DTC |
|
|
PHY_CDP_DM_AUTO | PHY_ENSWITCH_DP | PHY_ENSWITCH_DM);
|
|
writel(reg, utmi->regs + USB2_PHY_CHRGR_DETECT);
|
|
|
|
/* Disable PHY DP/DM pull-down (used for device mode) */
|
|
regmap_update_bits(utmi->usb_misc, USB2_PHY_CTRL(usb32),
|
|
USB2_DP_PULLDN_DEV_MODE |
|
|
USB2_DM_PULLDN_DEV_MODE, 0);
|
|
}
|
|
|
|
/* Wait for PLL calibration */
|
|
ret = readl_poll_timeout(utmi->regs + USB2_PHY_CAL_CTRL, reg,
|
|
reg & PHY_PLLCAL_DONE,
|
|
PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to end USB2 PLL calibration\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Wait for impedance calibration */
|
|
ret = readl_poll_timeout(utmi->regs + USB2_PHY_CAL_CTRL, reg,
|
|
reg & PHY_IMPCAL_DONE,
|
|
PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to end USB2 impedance calibration\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Wait for squelch calibration */
|
|
ret = readl_poll_timeout(utmi->regs + USB2_RX_CHAN_CTRL1, reg,
|
|
reg & USB2PHY_SQCAL_DONE,
|
|
PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to end USB2 unknown calibration\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Wait for PLL to be locked */
|
|
ret = readl_poll_timeout(utmi->regs + USB2_PHY_PLL_CTRL_REG0, reg,
|
|
reg & PLL_READY,
|
|
PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US);
|
|
if (ret)
|
|
dev_err(dev, "Failed to lock USB2 PLL\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mvebu_a3700_utmi_phy_power_off(struct phy *phy)
|
|
{
|
|
struct mvebu_a3700_utmi *utmi = phy_get_drvdata(phy);
|
|
int usb32 = utmi->caps->usb32;
|
|
u32 reg;
|
|
|
|
/* Disable PHY pull-up and enable USB2 suspend */
|
|
reg = readl(utmi->regs + USB2_PHY_CTRL(usb32));
|
|
reg &= ~(RB_USB2PHY_PU | RB_USB2PHY_SUSPM(usb32));
|
|
writel(reg, utmi->regs + USB2_PHY_CTRL(usb32));
|
|
|
|
/* Power down OTG module */
|
|
if (usb32) {
|
|
reg = readl(utmi->regs + USB2_PHY_OTG_CTRL);
|
|
reg &= ~PHY_PU_OTG;
|
|
writel(reg, utmi->regs + USB2_PHY_OTG_CTRL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops mvebu_a3700_utmi_phy_ops = {
|
|
.power_on = mvebu_a3700_utmi_phy_power_on,
|
|
.power_off = mvebu_a3700_utmi_phy_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct mvebu_a3700_utmi_caps mvebu_a3700_utmi_otg_phy_caps = {
|
|
.usb32 = true,
|
|
.ops = &mvebu_a3700_utmi_phy_ops,
|
|
};
|
|
|
|
static const struct mvebu_a3700_utmi_caps mvebu_a3700_utmi_host_phy_caps = {
|
|
.usb32 = false,
|
|
.ops = &mvebu_a3700_utmi_phy_ops,
|
|
};
|
|
|
|
static const struct of_device_id mvebu_a3700_utmi_of_match[] = {
|
|
{
|
|
.compatible = "marvell,a3700-utmi-otg-phy",
|
|
.data = &mvebu_a3700_utmi_otg_phy_caps,
|
|
},
|
|
{
|
|
.compatible = "marvell,a3700-utmi-host-phy",
|
|
.data = &mvebu_a3700_utmi_host_phy_caps,
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mvebu_a3700_utmi_of_match);
|
|
|
|
static int mvebu_a3700_utmi_phy_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct mvebu_a3700_utmi *utmi;
|
|
struct phy_provider *provider;
|
|
|
|
utmi = devm_kzalloc(dev, sizeof(*utmi), GFP_KERNEL);
|
|
if (!utmi)
|
|
return -ENOMEM;
|
|
|
|
/* Get UTMI memory region */
|
|
utmi->regs = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(utmi->regs))
|
|
return PTR_ERR(utmi->regs);
|
|
|
|
/* Get miscellaneous Host/PHY region */
|
|
utmi->usb_misc = syscon_regmap_lookup_by_phandle(dev->of_node,
|
|
"marvell,usb-misc-reg");
|
|
if (IS_ERR(utmi->usb_misc)) {
|
|
dev_err(dev,
|
|
"Missing USB misc purpose system controller\n");
|
|
return PTR_ERR(utmi->usb_misc);
|
|
}
|
|
|
|
/* Retrieve PHY capabilities */
|
|
utmi->caps = of_device_get_match_data(dev);
|
|
|
|
/* Instantiate the PHY */
|
|
utmi->phy = devm_phy_create(dev, NULL, utmi->caps->ops);
|
|
if (IS_ERR(utmi->phy)) {
|
|
dev_err(dev, "Failed to create the UTMI PHY\n");
|
|
return PTR_ERR(utmi->phy);
|
|
}
|
|
|
|
phy_set_drvdata(utmi->phy, utmi);
|
|
|
|
/* Ensure the PHY is powered off */
|
|
utmi->caps->ops->power_off(utmi->phy);
|
|
|
|
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
|
|
|
return PTR_ERR_OR_ZERO(provider);
|
|
}
|
|
|
|
static struct platform_driver mvebu_a3700_utmi_driver = {
|
|
.probe = mvebu_a3700_utmi_phy_probe,
|
|
.driver = {
|
|
.name = "mvebu-a3700-utmi-phy",
|
|
.of_match_table = mvebu_a3700_utmi_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(mvebu_a3700_utmi_driver);
|
|
|
|
MODULE_AUTHOR("Igal Liberman <igall@marvell.com>");
|
|
MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
|
|
MODULE_DESCRIPTION("Marvell EBU A3700 UTMI PHY driver");
|
|
MODULE_LICENSE("GPL v2");
|