537 строки
13 KiB
C
537 строки
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Driver for voltage controller regulators
|
|
*
|
|
* Copyright (C) 2017 Google, Inc.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/sort.h>
|
|
|
|
struct vctrl_voltage_range {
|
|
int min_uV;
|
|
int max_uV;
|
|
};
|
|
|
|
struct vctrl_voltage_ranges {
|
|
struct vctrl_voltage_range ctrl;
|
|
struct vctrl_voltage_range out;
|
|
};
|
|
|
|
struct vctrl_voltage_table {
|
|
int ctrl;
|
|
int out;
|
|
int ovp_min_sel;
|
|
};
|
|
|
|
struct vctrl_data {
|
|
struct regulator_dev *rdev;
|
|
struct regulator_desc desc;
|
|
struct regulator *ctrl_reg;
|
|
bool enabled;
|
|
unsigned int min_slew_down_rate;
|
|
unsigned int ovp_threshold;
|
|
struct vctrl_voltage_ranges vrange;
|
|
struct vctrl_voltage_table *vtable;
|
|
unsigned int sel;
|
|
};
|
|
|
|
static int vctrl_calc_ctrl_voltage(struct vctrl_data *vctrl, int out_uV)
|
|
{
|
|
struct vctrl_voltage_range *ctrl = &vctrl->vrange.ctrl;
|
|
struct vctrl_voltage_range *out = &vctrl->vrange.out;
|
|
|
|
return ctrl->min_uV +
|
|
DIV_ROUND_CLOSEST_ULL((s64)(out_uV - out->min_uV) *
|
|
(ctrl->max_uV - ctrl->min_uV),
|
|
out->max_uV - out->min_uV);
|
|
}
|
|
|
|
static int vctrl_calc_output_voltage(struct vctrl_data *vctrl, int ctrl_uV)
|
|
{
|
|
struct vctrl_voltage_range *ctrl = &vctrl->vrange.ctrl;
|
|
struct vctrl_voltage_range *out = &vctrl->vrange.out;
|
|
|
|
if (ctrl_uV < 0) {
|
|
pr_err("vctrl: failed to get control voltage\n");
|
|
return ctrl_uV;
|
|
}
|
|
|
|
if (ctrl_uV < ctrl->min_uV)
|
|
return out->min_uV;
|
|
|
|
if (ctrl_uV > ctrl->max_uV)
|
|
return out->max_uV;
|
|
|
|
return out->min_uV +
|
|
DIV_ROUND_CLOSEST_ULL((s64)(ctrl_uV - ctrl->min_uV) *
|
|
(out->max_uV - out->min_uV),
|
|
ctrl->max_uV - ctrl->min_uV);
|
|
}
|
|
|
|
static int vctrl_get_voltage(struct regulator_dev *rdev)
|
|
{
|
|
struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
|
|
int ctrl_uV = regulator_get_voltage(vctrl->ctrl_reg);
|
|
|
|
return vctrl_calc_output_voltage(vctrl, ctrl_uV);
|
|
}
|
|
|
|
static int vctrl_set_voltage(struct regulator_dev *rdev,
|
|
int req_min_uV, int req_max_uV,
|
|
unsigned int *selector)
|
|
{
|
|
struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
|
|
struct regulator *ctrl_reg = vctrl->ctrl_reg;
|
|
int orig_ctrl_uV = regulator_get_voltage(ctrl_reg);
|
|
int uV = vctrl_calc_output_voltage(vctrl, orig_ctrl_uV);
|
|
int ret;
|
|
|
|
if (req_min_uV >= uV || !vctrl->ovp_threshold)
|
|
/* voltage rising or no OVP */
|
|
return regulator_set_voltage(
|
|
ctrl_reg,
|
|
vctrl_calc_ctrl_voltage(vctrl, req_min_uV),
|
|
vctrl_calc_ctrl_voltage(vctrl, req_max_uV));
|
|
|
|
while (uV > req_min_uV) {
|
|
int max_drop_uV = (uV * vctrl->ovp_threshold) / 100;
|
|
int next_uV;
|
|
int next_ctrl_uV;
|
|
int delay;
|
|
|
|
/* Make sure no infinite loop even in crazy cases */
|
|
if (max_drop_uV == 0)
|
|
max_drop_uV = 1;
|
|
|
|
next_uV = max_t(int, req_min_uV, uV - max_drop_uV);
|
|
next_ctrl_uV = vctrl_calc_ctrl_voltage(vctrl, next_uV);
|
|
|
|
ret = regulator_set_voltage(ctrl_reg,
|
|
next_ctrl_uV,
|
|
next_ctrl_uV);
|
|
if (ret)
|
|
goto err;
|
|
|
|
delay = DIV_ROUND_UP(uV - next_uV, vctrl->min_slew_down_rate);
|
|
usleep_range(delay, delay + DIV_ROUND_UP(delay, 10));
|
|
|
|
uV = next_uV;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
/* Try to go back to original voltage */
|
|
regulator_set_voltage(ctrl_reg, orig_ctrl_uV, orig_ctrl_uV);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int vctrl_get_voltage_sel(struct regulator_dev *rdev)
|
|
{
|
|
struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
|
|
|
|
return vctrl->sel;
|
|
}
|
|
|
|
static int vctrl_set_voltage_sel(struct regulator_dev *rdev,
|
|
unsigned int selector)
|
|
{
|
|
struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
|
|
struct regulator *ctrl_reg = vctrl->ctrl_reg;
|
|
unsigned int orig_sel = vctrl->sel;
|
|
int ret;
|
|
|
|
if (selector >= rdev->desc->n_voltages)
|
|
return -EINVAL;
|
|
|
|
if (selector >= vctrl->sel || !vctrl->ovp_threshold) {
|
|
/* voltage rising or no OVP */
|
|
ret = regulator_set_voltage(ctrl_reg,
|
|
vctrl->vtable[selector].ctrl,
|
|
vctrl->vtable[selector].ctrl);
|
|
if (!ret)
|
|
vctrl->sel = selector;
|
|
|
|
return ret;
|
|
}
|
|
|
|
while (vctrl->sel != selector) {
|
|
unsigned int next_sel;
|
|
int delay;
|
|
|
|
if (selector >= vctrl->vtable[vctrl->sel].ovp_min_sel)
|
|
next_sel = selector;
|
|
else
|
|
next_sel = vctrl->vtable[vctrl->sel].ovp_min_sel;
|
|
|
|
ret = regulator_set_voltage(ctrl_reg,
|
|
vctrl->vtable[next_sel].ctrl,
|
|
vctrl->vtable[next_sel].ctrl);
|
|
if (ret) {
|
|
dev_err(&rdev->dev,
|
|
"failed to set control voltage to %duV\n",
|
|
vctrl->vtable[next_sel].ctrl);
|
|
goto err;
|
|
}
|
|
vctrl->sel = next_sel;
|
|
|
|
delay = DIV_ROUND_UP(vctrl->vtable[vctrl->sel].out -
|
|
vctrl->vtable[next_sel].out,
|
|
vctrl->min_slew_down_rate);
|
|
usleep_range(delay, delay + DIV_ROUND_UP(delay, 10));
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
if (vctrl->sel != orig_sel) {
|
|
/* Try to go back to original voltage */
|
|
if (!regulator_set_voltage(ctrl_reg,
|
|
vctrl->vtable[orig_sel].ctrl,
|
|
vctrl->vtable[orig_sel].ctrl))
|
|
vctrl->sel = orig_sel;
|
|
else
|
|
dev_warn(&rdev->dev,
|
|
"failed to restore original voltage\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int vctrl_list_voltage(struct regulator_dev *rdev,
|
|
unsigned int selector)
|
|
{
|
|
struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
|
|
|
|
if (selector >= rdev->desc->n_voltages)
|
|
return -EINVAL;
|
|
|
|
return vctrl->vtable[selector].out;
|
|
}
|
|
|
|
static int vctrl_parse_dt(struct platform_device *pdev,
|
|
struct vctrl_data *vctrl)
|
|
{
|
|
int ret;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
u32 pval;
|
|
u32 vrange_ctrl[2];
|
|
|
|
vctrl->ctrl_reg = devm_regulator_get(&pdev->dev, "ctrl");
|
|
if (IS_ERR(vctrl->ctrl_reg))
|
|
return PTR_ERR(vctrl->ctrl_reg);
|
|
|
|
ret = of_property_read_u32(np, "ovp-threshold-percent", &pval);
|
|
if (!ret) {
|
|
vctrl->ovp_threshold = pval;
|
|
if (vctrl->ovp_threshold > 100) {
|
|
dev_err(&pdev->dev,
|
|
"ovp-threshold-percent (%u) > 100\n",
|
|
vctrl->ovp_threshold);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "min-slew-down-rate", &pval);
|
|
if (!ret) {
|
|
vctrl->min_slew_down_rate = pval;
|
|
|
|
/* We use the value as int and as divider; sanity check */
|
|
if (vctrl->min_slew_down_rate == 0) {
|
|
dev_err(&pdev->dev,
|
|
"min-slew-down-rate must not be 0\n");
|
|
return -EINVAL;
|
|
} else if (vctrl->min_slew_down_rate > INT_MAX) {
|
|
dev_err(&pdev->dev, "min-slew-down-rate (%u) too big\n",
|
|
vctrl->min_slew_down_rate);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (vctrl->ovp_threshold && !vctrl->min_slew_down_rate) {
|
|
dev_err(&pdev->dev,
|
|
"ovp-threshold-percent requires min-slew-down-rate\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "regulator-min-microvolt", &pval);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"failed to read regulator-min-microvolt: %d\n", ret);
|
|
return ret;
|
|
}
|
|
vctrl->vrange.out.min_uV = pval;
|
|
|
|
ret = of_property_read_u32(np, "regulator-max-microvolt", &pval);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"failed to read regulator-max-microvolt: %d\n", ret);
|
|
return ret;
|
|
}
|
|
vctrl->vrange.out.max_uV = pval;
|
|
|
|
ret = of_property_read_u32_array(np, "ctrl-voltage-range", vrange_ctrl,
|
|
2);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to read ctrl-voltage-range: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
if (vrange_ctrl[0] >= vrange_ctrl[1]) {
|
|
dev_err(&pdev->dev, "ctrl-voltage-range is invalid: %d-%d\n",
|
|
vrange_ctrl[0], vrange_ctrl[1]);
|
|
return -EINVAL;
|
|
}
|
|
|
|
vctrl->vrange.ctrl.min_uV = vrange_ctrl[0];
|
|
vctrl->vrange.ctrl.max_uV = vrange_ctrl[1];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vctrl_cmp_ctrl_uV(const void *a, const void *b)
|
|
{
|
|
const struct vctrl_voltage_table *at = a;
|
|
const struct vctrl_voltage_table *bt = b;
|
|
|
|
return at->ctrl - bt->ctrl;
|
|
}
|
|
|
|
static int vctrl_init_vtable(struct platform_device *pdev)
|
|
{
|
|
struct vctrl_data *vctrl = platform_get_drvdata(pdev);
|
|
struct regulator_desc *rdesc = &vctrl->desc;
|
|
struct regulator *ctrl_reg = vctrl->ctrl_reg;
|
|
struct vctrl_voltage_range *vrange_ctrl = &vctrl->vrange.ctrl;
|
|
int n_voltages;
|
|
int ctrl_uV;
|
|
int i, idx_vt;
|
|
|
|
n_voltages = regulator_count_voltages(ctrl_reg);
|
|
|
|
rdesc->n_voltages = n_voltages;
|
|
|
|
/* determine number of steps within the range of the vctrl regulator */
|
|
for (i = 0; i < n_voltages; i++) {
|
|
ctrl_uV = regulator_list_voltage(ctrl_reg, i);
|
|
|
|
if (ctrl_uV < vrange_ctrl->min_uV ||
|
|
ctrl_uV > vrange_ctrl->max_uV)
|
|
rdesc->n_voltages--;
|
|
}
|
|
|
|
if (rdesc->n_voltages == 0) {
|
|
dev_err(&pdev->dev, "invalid configuration\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
vctrl->vtable = devm_kcalloc(&pdev->dev, rdesc->n_voltages,
|
|
sizeof(struct vctrl_voltage_table),
|
|
GFP_KERNEL);
|
|
if (!vctrl->vtable)
|
|
return -ENOMEM;
|
|
|
|
/* create mapping control <=> output voltage */
|
|
for (i = 0, idx_vt = 0; i < n_voltages; i++) {
|
|
ctrl_uV = regulator_list_voltage(ctrl_reg, i);
|
|
|
|
if (ctrl_uV < vrange_ctrl->min_uV ||
|
|
ctrl_uV > vrange_ctrl->max_uV)
|
|
continue;
|
|
|
|
vctrl->vtable[idx_vt].ctrl = ctrl_uV;
|
|
vctrl->vtable[idx_vt].out =
|
|
vctrl_calc_output_voltage(vctrl, ctrl_uV);
|
|
idx_vt++;
|
|
}
|
|
|
|
/* we rely on the table to be ordered by ascending voltage */
|
|
sort(vctrl->vtable, rdesc->n_voltages,
|
|
sizeof(struct vctrl_voltage_table), vctrl_cmp_ctrl_uV,
|
|
NULL);
|
|
|
|
/* pre-calculate OVP-safe downward transitions */
|
|
for (i = rdesc->n_voltages - 1; i > 0; i--) {
|
|
int j;
|
|
int ovp_min_uV = (vctrl->vtable[i].out *
|
|
(100 - vctrl->ovp_threshold)) / 100;
|
|
|
|
for (j = 0; j < i; j++) {
|
|
if (vctrl->vtable[j].out >= ovp_min_uV) {
|
|
vctrl->vtable[i].ovp_min_sel = j;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (j == i) {
|
|
dev_warn(&pdev->dev, "switching down from %duV may cause OVP shutdown\n",
|
|
vctrl->vtable[i].out);
|
|
/* use next lowest voltage */
|
|
vctrl->vtable[i].ovp_min_sel = i - 1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vctrl_enable(struct regulator_dev *rdev)
|
|
{
|
|
struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
|
|
int ret = regulator_enable(vctrl->ctrl_reg);
|
|
|
|
if (!ret)
|
|
vctrl->enabled = true;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int vctrl_disable(struct regulator_dev *rdev)
|
|
{
|
|
struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
|
|
int ret = regulator_disable(vctrl->ctrl_reg);
|
|
|
|
if (!ret)
|
|
vctrl->enabled = false;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int vctrl_is_enabled(struct regulator_dev *rdev)
|
|
{
|
|
struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
|
|
|
|
return vctrl->enabled;
|
|
}
|
|
|
|
static const struct regulator_ops vctrl_ops_cont = {
|
|
.enable = vctrl_enable,
|
|
.disable = vctrl_disable,
|
|
.is_enabled = vctrl_is_enabled,
|
|
.get_voltage = vctrl_get_voltage,
|
|
.set_voltage = vctrl_set_voltage,
|
|
};
|
|
|
|
static const struct regulator_ops vctrl_ops_non_cont = {
|
|
.enable = vctrl_enable,
|
|
.disable = vctrl_disable,
|
|
.is_enabled = vctrl_is_enabled,
|
|
.set_voltage_sel = vctrl_set_voltage_sel,
|
|
.get_voltage_sel = vctrl_get_voltage_sel,
|
|
.list_voltage = vctrl_list_voltage,
|
|
.map_voltage = regulator_map_voltage_iterate,
|
|
};
|
|
|
|
static int vctrl_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct vctrl_data *vctrl;
|
|
const struct regulator_init_data *init_data;
|
|
struct regulator_desc *rdesc;
|
|
struct regulator_config cfg = { };
|
|
struct vctrl_voltage_range *vrange_ctrl;
|
|
int ctrl_uV;
|
|
int ret;
|
|
|
|
vctrl = devm_kzalloc(&pdev->dev, sizeof(struct vctrl_data),
|
|
GFP_KERNEL);
|
|
if (!vctrl)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, vctrl);
|
|
|
|
ret = vctrl_parse_dt(pdev, vctrl);
|
|
if (ret)
|
|
return ret;
|
|
|
|
vrange_ctrl = &vctrl->vrange.ctrl;
|
|
|
|
rdesc = &vctrl->desc;
|
|
rdesc->name = "vctrl";
|
|
rdesc->type = REGULATOR_VOLTAGE;
|
|
rdesc->owner = THIS_MODULE;
|
|
|
|
if ((regulator_get_linear_step(vctrl->ctrl_reg) == 1) ||
|
|
(regulator_count_voltages(vctrl->ctrl_reg) == -EINVAL)) {
|
|
rdesc->continuous_voltage_range = true;
|
|
rdesc->ops = &vctrl_ops_cont;
|
|
} else {
|
|
rdesc->ops = &vctrl_ops_non_cont;
|
|
}
|
|
|
|
init_data = of_get_regulator_init_data(&pdev->dev, np, rdesc);
|
|
if (!init_data)
|
|
return -ENOMEM;
|
|
|
|
cfg.of_node = np;
|
|
cfg.dev = &pdev->dev;
|
|
cfg.driver_data = vctrl;
|
|
cfg.init_data = init_data;
|
|
|
|
if (!rdesc->continuous_voltage_range) {
|
|
ret = vctrl_init_vtable(pdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ctrl_uV = regulator_get_voltage(vctrl->ctrl_reg);
|
|
if (ctrl_uV < 0) {
|
|
dev_err(&pdev->dev, "failed to get control voltage\n");
|
|
return ctrl_uV;
|
|
}
|
|
|
|
/* determine current voltage selector from control voltage */
|
|
if (ctrl_uV < vrange_ctrl->min_uV) {
|
|
vctrl->sel = 0;
|
|
} else if (ctrl_uV > vrange_ctrl->max_uV) {
|
|
vctrl->sel = rdesc->n_voltages - 1;
|
|
} else {
|
|
int i;
|
|
|
|
for (i = 0; i < rdesc->n_voltages; i++) {
|
|
if (ctrl_uV == vctrl->vtable[i].ctrl) {
|
|
vctrl->sel = i;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
vctrl->rdev = devm_regulator_register(&pdev->dev, rdesc, &cfg);
|
|
if (IS_ERR(vctrl->rdev)) {
|
|
ret = PTR_ERR(vctrl->rdev);
|
|
dev_err(&pdev->dev, "failed to register regulator: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id vctrl_of_match[] = {
|
|
{ .compatible = "vctrl-regulator", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, vctrl_of_match);
|
|
|
|
static struct platform_driver vctrl_driver = {
|
|
.probe = vctrl_probe,
|
|
.driver = {
|
|
.name = "vctrl-regulator",
|
|
.of_match_table = of_match_ptr(vctrl_of_match),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(vctrl_driver);
|
|
|
|
MODULE_DESCRIPTION("Voltage Controlled Regulator Driver");
|
|
MODULE_AUTHOR("Matthias Kaehlcke <mka@chromium.org>");
|
|
MODULE_LICENSE("GPL v2");
|