407 строки
11 KiB
C
407 строки
11 KiB
C
/* Typhoon Radio Card driver for radio support
|
|
* (c) 1999 Dr. Henrik Seidel <Henrik.Seidel@gmx.de>
|
|
*
|
|
* Card manufacturer:
|
|
* http://194.18.155.92/idc/prod2.idc?nr=50753&lang=e
|
|
*
|
|
* Notes on the hardware
|
|
*
|
|
* This card has two output sockets, one for speakers and one for line.
|
|
* The speaker output has volume control, but only in four discrete
|
|
* steps. The line output has neither volume control nor mute.
|
|
*
|
|
* The card has auto-stereo according to its manual, although it all
|
|
* sounds mono to me (even with the Win/DOS drivers). Maybe it's my
|
|
* antenna - I really don't know for sure.
|
|
*
|
|
* Frequency control is done digitally.
|
|
*
|
|
* Volume control is done digitally, but there are only four different
|
|
* possible values. So you should better always turn the volume up and
|
|
* use line control. I got the best results by connecting line output
|
|
* to the sound card microphone input. For such a configuration the
|
|
* volume control has no effect, since volume control only influences
|
|
* the speaker output.
|
|
*
|
|
* There is no explicit mute/unmute. So I set the radio frequency to a
|
|
* value where I do expect just noise and turn the speaker volume down.
|
|
* The frequency change is necessary since the card never seems to be
|
|
* completely silent.
|
|
*
|
|
* Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
*/
|
|
|
|
#include <linux/module.h> /* Modules */
|
|
#include <linux/init.h> /* Initdata */
|
|
#include <linux/ioport.h> /* request_region */
|
|
#include <linux/version.h> /* for KERNEL_VERSION MACRO */
|
|
#include <linux/videodev2.h> /* kernel radio structs */
|
|
#include <linux/io.h> /* outb, outb_p */
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-ioctl.h>
|
|
|
|
MODULE_AUTHOR("Dr. Henrik Seidel");
|
|
MODULE_DESCRIPTION("A driver for the Typhoon radio card (a.k.a. EcoRadio).");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
#ifndef CONFIG_RADIO_TYPHOON_PORT
|
|
#define CONFIG_RADIO_TYPHOON_PORT -1
|
|
#endif
|
|
|
|
#ifndef CONFIG_RADIO_TYPHOON_MUTEFREQ
|
|
#define CONFIG_RADIO_TYPHOON_MUTEFREQ 0
|
|
#endif
|
|
|
|
static int io = CONFIG_RADIO_TYPHOON_PORT;
|
|
static int radio_nr = -1;
|
|
|
|
module_param(io, int, 0);
|
|
MODULE_PARM_DESC(io, "I/O address of the Typhoon card (0x316 or 0x336)");
|
|
|
|
module_param(radio_nr, int, 0);
|
|
|
|
static unsigned long mutefreq = CONFIG_RADIO_TYPHOON_MUTEFREQ;
|
|
module_param(mutefreq, ulong, 0);
|
|
MODULE_PARM_DESC(mutefreq, "Frequency used when muting the card (in kHz)");
|
|
|
|
#define RADIO_VERSION KERNEL_VERSION(0, 1, 1)
|
|
|
|
#define BANNER "Typhoon Radio Card driver v0.1.1\n"
|
|
|
|
struct typhoon {
|
|
struct v4l2_device v4l2_dev;
|
|
struct video_device vdev;
|
|
int io;
|
|
int curvol;
|
|
int muted;
|
|
unsigned long curfreq;
|
|
unsigned long mutefreq;
|
|
struct mutex lock;
|
|
};
|
|
|
|
static struct typhoon typhoon_card;
|
|
|
|
static void typhoon_setvol_generic(struct typhoon *dev, int vol)
|
|
{
|
|
mutex_lock(&dev->lock);
|
|
vol >>= 14; /* Map 16 bit to 2 bit */
|
|
vol &= 3;
|
|
outb_p(vol / 2, dev->io); /* Set the volume, high bit. */
|
|
outb_p(vol % 2, dev->io + 2); /* Set the volume, low bit. */
|
|
mutex_unlock(&dev->lock);
|
|
}
|
|
|
|
static int typhoon_setfreq_generic(struct typhoon *dev,
|
|
unsigned long frequency)
|
|
{
|
|
unsigned long outval;
|
|
unsigned long x;
|
|
|
|
/*
|
|
* The frequency transfer curve is not linear. The best fit I could
|
|
* get is
|
|
*
|
|
* outval = -155 + exp((f + 15.55) * 0.057))
|
|
*
|
|
* where frequency f is in MHz. Since we don't have exp in the kernel,
|
|
* I approximate this function by a third order polynomial.
|
|
*
|
|
*/
|
|
|
|
mutex_lock(&dev->lock);
|
|
x = frequency / 160;
|
|
outval = (x * x + 2500) / 5000;
|
|
outval = (outval * x + 5000) / 10000;
|
|
outval -= (10 * x * x + 10433) / 20866;
|
|
outval += 4 * x - 11505;
|
|
|
|
outb_p((outval >> 8) & 0x01, dev->io + 4);
|
|
outb_p(outval >> 9, dev->io + 6);
|
|
outb_p(outval & 0xff, dev->io + 8);
|
|
mutex_unlock(&dev->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int typhoon_setfreq(struct typhoon *dev, unsigned long frequency)
|
|
{
|
|
typhoon_setfreq_generic(dev, frequency);
|
|
dev->curfreq = frequency;
|
|
return 0;
|
|
}
|
|
|
|
static void typhoon_mute(struct typhoon *dev)
|
|
{
|
|
if (dev->muted == 1)
|
|
return;
|
|
typhoon_setvol_generic(dev, 0);
|
|
typhoon_setfreq_generic(dev, dev->mutefreq);
|
|
dev->muted = 1;
|
|
}
|
|
|
|
static void typhoon_unmute(struct typhoon *dev)
|
|
{
|
|
if (dev->muted == 0)
|
|
return;
|
|
typhoon_setfreq_generic(dev, dev->curfreq);
|
|
typhoon_setvol_generic(dev, dev->curvol);
|
|
dev->muted = 0;
|
|
}
|
|
|
|
static int typhoon_setvol(struct typhoon *dev, int vol)
|
|
{
|
|
if (dev->muted && vol != 0) { /* user is unmuting the card */
|
|
dev->curvol = vol;
|
|
typhoon_unmute(dev);
|
|
return 0;
|
|
}
|
|
if (vol == dev->curvol) /* requested volume == current */
|
|
return 0;
|
|
|
|
if (vol == 0) { /* volume == 0 means mute the card */
|
|
typhoon_mute(dev);
|
|
dev->curvol = vol;
|
|
return 0;
|
|
}
|
|
typhoon_setvol_generic(dev, vol);
|
|
dev->curvol = vol;
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_querycap(struct file *file, void *priv,
|
|
struct v4l2_capability *v)
|
|
{
|
|
strlcpy(v->driver, "radio-typhoon", sizeof(v->driver));
|
|
strlcpy(v->card, "Typhoon Radio", sizeof(v->card));
|
|
strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
|
|
v->version = RADIO_VERSION;
|
|
v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_g_tuner(struct file *file, void *priv,
|
|
struct v4l2_tuner *v)
|
|
{
|
|
if (v->index > 0)
|
|
return -EINVAL;
|
|
|
|
strlcpy(v->name, "FM", sizeof(v->name));
|
|
v->type = V4L2_TUNER_RADIO;
|
|
v->rangelow = 87.5 * 16000;
|
|
v->rangehigh = 108 * 16000;
|
|
v->rxsubchans = V4L2_TUNER_SUB_MONO;
|
|
v->capability = V4L2_TUNER_CAP_LOW;
|
|
v->audmode = V4L2_TUNER_MODE_MONO;
|
|
v->signal = 0xFFFF; /* We can't get the signal strength */
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_s_tuner(struct file *file, void *priv,
|
|
struct v4l2_tuner *v)
|
|
{
|
|
return v->index ? -EINVAL : 0;
|
|
}
|
|
|
|
static int vidioc_g_frequency(struct file *file, void *priv,
|
|
struct v4l2_frequency *f)
|
|
{
|
|
struct typhoon *dev = video_drvdata(file);
|
|
|
|
f->type = V4L2_TUNER_RADIO;
|
|
f->frequency = dev->curfreq;
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_s_frequency(struct file *file, void *priv,
|
|
struct v4l2_frequency *f)
|
|
{
|
|
struct typhoon *dev = video_drvdata(file);
|
|
|
|
dev->curfreq = f->frequency;
|
|
typhoon_setfreq(dev, dev->curfreq);
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_queryctrl(struct file *file, void *priv,
|
|
struct v4l2_queryctrl *qc)
|
|
{
|
|
switch (qc->id) {
|
|
case V4L2_CID_AUDIO_MUTE:
|
|
return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
|
|
case V4L2_CID_AUDIO_VOLUME:
|
|
return v4l2_ctrl_query_fill(qc, 0, 65535, 16384, 65535);
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int vidioc_g_ctrl(struct file *file, void *priv,
|
|
struct v4l2_control *ctrl)
|
|
{
|
|
struct typhoon *dev = video_drvdata(file);
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_AUDIO_MUTE:
|
|
ctrl->value = dev->muted;
|
|
return 0;
|
|
case V4L2_CID_AUDIO_VOLUME:
|
|
ctrl->value = dev->curvol;
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int vidioc_s_ctrl (struct file *file, void *priv,
|
|
struct v4l2_control *ctrl)
|
|
{
|
|
struct typhoon *dev = video_drvdata(file);
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_AUDIO_MUTE:
|
|
if (ctrl->value)
|
|
typhoon_mute(dev);
|
|
else
|
|
typhoon_unmute(dev);
|
|
return 0;
|
|
case V4L2_CID_AUDIO_VOLUME:
|
|
typhoon_setvol(dev, ctrl->value);
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
|
|
{
|
|
*i = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
|
|
{
|
|
return i ? -EINVAL : 0;
|
|
}
|
|
|
|
static int vidioc_g_audio(struct file *file, void *priv,
|
|
struct v4l2_audio *a)
|
|
{
|
|
a->index = 0;
|
|
strlcpy(a->name, "Radio", sizeof(a->name));
|
|
a->capability = V4L2_AUDCAP_STEREO;
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_s_audio(struct file *file, void *priv,
|
|
struct v4l2_audio *a)
|
|
{
|
|
return a->index ? -EINVAL : 0;
|
|
}
|
|
|
|
static int vidioc_log_status(struct file *file, void *priv)
|
|
{
|
|
struct typhoon *dev = video_drvdata(file);
|
|
struct v4l2_device *v4l2_dev = &dev->v4l2_dev;
|
|
|
|
v4l2_info(v4l2_dev, BANNER);
|
|
#ifdef MODULE
|
|
v4l2_info(v4l2_dev, "Load type: Driver loaded as a module\n\n");
|
|
#else
|
|
v4l2_info(v4l2_dev, "Load type: Driver compiled into kernel\n\n");
|
|
#endif
|
|
v4l2_info(v4l2_dev, "frequency = %lu kHz\n", dev->curfreq >> 4);
|
|
v4l2_info(v4l2_dev, "volume = %d\n", dev->curvol);
|
|
v4l2_info(v4l2_dev, "mute = %s\n", dev->muted ? "on" : "off");
|
|
v4l2_info(v4l2_dev, "io = 0x%x\n", dev->io);
|
|
v4l2_info(v4l2_dev, "mute frequency = %lu kHz\n", dev->mutefreq >> 4);
|
|
return 0;
|
|
}
|
|
|
|
static const struct v4l2_file_operations typhoon_fops = {
|
|
.owner = THIS_MODULE,
|
|
.ioctl = video_ioctl2,
|
|
};
|
|
|
|
static const struct v4l2_ioctl_ops typhoon_ioctl_ops = {
|
|
.vidioc_log_status = vidioc_log_status,
|
|
.vidioc_querycap = vidioc_querycap,
|
|
.vidioc_g_tuner = vidioc_g_tuner,
|
|
.vidioc_s_tuner = vidioc_s_tuner,
|
|
.vidioc_g_audio = vidioc_g_audio,
|
|
.vidioc_s_audio = vidioc_s_audio,
|
|
.vidioc_g_input = vidioc_g_input,
|
|
.vidioc_s_input = vidioc_s_input,
|
|
.vidioc_g_frequency = vidioc_g_frequency,
|
|
.vidioc_s_frequency = vidioc_s_frequency,
|
|
.vidioc_queryctrl = vidioc_queryctrl,
|
|
.vidioc_g_ctrl = vidioc_g_ctrl,
|
|
.vidioc_s_ctrl = vidioc_s_ctrl,
|
|
};
|
|
|
|
static int __init typhoon_init(void)
|
|
{
|
|
struct typhoon *dev = &typhoon_card;
|
|
struct v4l2_device *v4l2_dev = &dev->v4l2_dev;
|
|
int res;
|
|
|
|
strlcpy(v4l2_dev->name, "typhoon", sizeof(v4l2_dev->name));
|
|
dev->io = io;
|
|
dev->curfreq = dev->mutefreq = mutefreq;
|
|
|
|
if (dev->io == -1) {
|
|
v4l2_err(v4l2_dev, "You must set an I/O address with io=0x316 or io=0x336\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (dev->mutefreq < 87000 || dev->mutefreq > 108500) {
|
|
v4l2_err(v4l2_dev, "You must set a frequency (in kHz) used when muting the card,\n");
|
|
v4l2_err(v4l2_dev, "e.g. with \"mutefreq=87500\" (87000 <= mutefreq <= 108500)\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_init(&dev->lock);
|
|
if (!request_region(dev->io, 8, "typhoon")) {
|
|
v4l2_err(v4l2_dev, "port 0x%x already in use\n",
|
|
dev->io);
|
|
return -EBUSY;
|
|
}
|
|
|
|
res = v4l2_device_register(NULL, v4l2_dev);
|
|
if (res < 0) {
|
|
release_region(dev->io, 8);
|
|
v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
|
|
return res;
|
|
}
|
|
v4l2_info(v4l2_dev, BANNER);
|
|
|
|
strlcpy(dev->vdev.name, v4l2_dev->name, sizeof(dev->vdev.name));
|
|
dev->vdev.v4l2_dev = v4l2_dev;
|
|
dev->vdev.fops = &typhoon_fops;
|
|
dev->vdev.ioctl_ops = &typhoon_ioctl_ops;
|
|
dev->vdev.release = video_device_release_empty;
|
|
video_set_drvdata(&dev->vdev, dev);
|
|
if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
|
|
v4l2_device_unregister(&dev->v4l2_dev);
|
|
release_region(dev->io, 8);
|
|
return -EINVAL;
|
|
}
|
|
v4l2_info(v4l2_dev, "port 0x%x.\n", dev->io);
|
|
v4l2_info(v4l2_dev, "mute frequency is %lu kHz.\n", dev->mutefreq);
|
|
dev->mutefreq <<= 4;
|
|
|
|
/* mute card - prevents noisy bootups */
|
|
typhoon_mute(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit typhoon_exit(void)
|
|
{
|
|
struct typhoon *dev = &typhoon_card;
|
|
|
|
video_unregister_device(&dev->vdev);
|
|
v4l2_device_unregister(&dev->v4l2_dev);
|
|
release_region(dev->io, 8);
|
|
}
|
|
|
|
module_init(typhoon_init);
|
|
module_exit(typhoon_exit);
|
|
|