289 строки
6.7 KiB
C
289 строки
6.7 KiB
C
/*
|
|
* Platform setup for the Freescale mpc885ads board
|
|
*
|
|
* Vitaly Bordug <vbordug@ru.mvista.com>
|
|
*
|
|
* Copyright 2005 MontaVista Software Inc.
|
|
*
|
|
* Heavily modified by Scott Wood <scottwood@freescale.com>
|
|
* Copyright 2007 Freescale Semiconductor, Inc.
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/param.h>
|
|
#include <linux/string.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/fs_enet_pd.h>
|
|
#include <linux/fs_uart_pd.h>
|
|
#include <linux/fsl_devices.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/of_platform.h>
|
|
|
|
#include <asm/delay.h>
|
|
#include <asm/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/page.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/system.h>
|
|
#include <asm/time.h>
|
|
#include <asm/mpc8xx.h>
|
|
#include <asm/8xx_immap.h>
|
|
#include <asm/cpm1.h>
|
|
#include <asm/fs_pd.h>
|
|
#include <asm/udbg.h>
|
|
|
|
#include "mpc885ads.h"
|
|
#include "mpc8xx.h"
|
|
|
|
static u32 __iomem *bcsr, *bcsr5;
|
|
|
|
#ifdef CONFIG_PCMCIA_M8XX
|
|
static void pcmcia_hw_setup(int slot, int enable)
|
|
{
|
|
if (enable)
|
|
clrbits32(&bcsr[1], BCSR1_PCCEN);
|
|
else
|
|
setbits32(&bcsr[1], BCSR1_PCCEN);
|
|
}
|
|
|
|
static int pcmcia_set_voltage(int slot, int vcc, int vpp)
|
|
{
|
|
u32 reg = 0;
|
|
|
|
switch (vcc) {
|
|
case 0:
|
|
break;
|
|
case 33:
|
|
reg |= BCSR1_PCCVCC0;
|
|
break;
|
|
case 50:
|
|
reg |= BCSR1_PCCVCC1;
|
|
break;
|
|
default:
|
|
return 1;
|
|
}
|
|
|
|
switch (vpp) {
|
|
case 0:
|
|
break;
|
|
case 33:
|
|
case 50:
|
|
if (vcc == vpp)
|
|
reg |= BCSR1_PCCVPP1;
|
|
else
|
|
return 1;
|
|
break;
|
|
case 120:
|
|
if ((vcc == 33) || (vcc == 50))
|
|
reg |= BCSR1_PCCVPP0;
|
|
else
|
|
return 1;
|
|
default:
|
|
return 1;
|
|
}
|
|
|
|
/* first, turn off all power */
|
|
clrbits32(&bcsr[1], 0x00610000);
|
|
|
|
/* enable new powersettings */
|
|
setbits32(&bcsr[1], reg);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
struct cpm_pin {
|
|
int port, pin, flags;
|
|
};
|
|
|
|
static struct cpm_pin mpc885ads_pins[] = {
|
|
/* SMC1 */
|
|
{CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
|
|
{CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
|
|
|
|
/* SMC2 */
|
|
#ifndef CONFIG_MPC8xx_SECOND_ETH_FEC2
|
|
{CPM_PORTE, 21, CPM_PIN_INPUT}, /* RX */
|
|
{CPM_PORTE, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
|
|
#endif
|
|
|
|
/* SCC3 */
|
|
{CPM_PORTA, 9, CPM_PIN_INPUT}, /* RX */
|
|
{CPM_PORTA, 8, CPM_PIN_INPUT}, /* TX */
|
|
{CPM_PORTC, 4, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */
|
|
{CPM_PORTC, 5, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */
|
|
{CPM_PORTE, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
|
|
{CPM_PORTE, 17, CPM_PIN_INPUT}, /* CLK5 */
|
|
{CPM_PORTE, 16, CPM_PIN_INPUT}, /* CLK6 */
|
|
|
|
/* MII1 */
|
|
{CPM_PORTA, 0, CPM_PIN_INPUT},
|
|
{CPM_PORTA, 1, CPM_PIN_INPUT},
|
|
{CPM_PORTA, 2, CPM_PIN_INPUT},
|
|
{CPM_PORTA, 3, CPM_PIN_INPUT},
|
|
{CPM_PORTA, 4, CPM_PIN_OUTPUT},
|
|
{CPM_PORTA, 10, CPM_PIN_OUTPUT},
|
|
{CPM_PORTA, 11, CPM_PIN_OUTPUT},
|
|
{CPM_PORTB, 19, CPM_PIN_INPUT},
|
|
{CPM_PORTB, 31, CPM_PIN_INPUT},
|
|
{CPM_PORTC, 12, CPM_PIN_INPUT},
|
|
{CPM_PORTC, 13, CPM_PIN_INPUT},
|
|
{CPM_PORTE, 30, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 31, CPM_PIN_OUTPUT},
|
|
|
|
/* MII2 */
|
|
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
|
|
{CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
|
{CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
|
{CPM_PORTE, 16, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
|
{CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
|
{CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
|
{CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
|
{CPM_PORTE, 21, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 22, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 23, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 24, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 25, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 26, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 27, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 28, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 29, CPM_PIN_OUTPUT},
|
|
#endif
|
|
/* I2C */
|
|
{CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
|
|
{CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
|
|
};
|
|
|
|
static void __init init_ioports(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mpc885ads_pins); i++) {
|
|
struct cpm_pin *pin = &mpc885ads_pins[i];
|
|
cpm1_set_pin(pin->port, pin->pin, pin->flags);
|
|
}
|
|
|
|
cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
|
|
cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX);
|
|
cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_TX);
|
|
cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_RX);
|
|
|
|
/* Set FEC1 and FEC2 to MII mode */
|
|
clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
|
|
}
|
|
|
|
static void __init mpc885ads_setup_arch(void)
|
|
{
|
|
struct device_node *np;
|
|
|
|
cpm_reset();
|
|
init_ioports();
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl,mpc885ads-bcsr");
|
|
if (!np) {
|
|
printk(KERN_CRIT "Could not find fsl,mpc885ads-bcsr node\n");
|
|
return;
|
|
}
|
|
|
|
bcsr = of_iomap(np, 0);
|
|
bcsr5 = of_iomap(np, 1);
|
|
of_node_put(np);
|
|
|
|
if (!bcsr || !bcsr5) {
|
|
printk(KERN_CRIT "Could not remap BCSR\n");
|
|
return;
|
|
}
|
|
|
|
clrbits32(&bcsr[1], BCSR1_RS232EN_1);
|
|
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
|
|
setbits32(&bcsr[1], BCSR1_RS232EN_2);
|
|
#else
|
|
clrbits32(&bcsr[1], BCSR1_RS232EN_2);
|
|
#endif
|
|
|
|
clrbits32(bcsr5, BCSR5_MII1_EN);
|
|
setbits32(bcsr5, BCSR5_MII1_RST);
|
|
udelay(1000);
|
|
clrbits32(bcsr5, BCSR5_MII1_RST);
|
|
|
|
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
|
|
clrbits32(bcsr5, BCSR5_MII2_EN);
|
|
setbits32(bcsr5, BCSR5_MII2_RST);
|
|
udelay(1000);
|
|
clrbits32(bcsr5, BCSR5_MII2_RST);
|
|
#else
|
|
setbits32(bcsr5, BCSR5_MII2_EN);
|
|
#endif
|
|
|
|
#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
|
|
clrbits32(&bcsr[4], BCSR4_ETH10_RST);
|
|
udelay(1000);
|
|
setbits32(&bcsr[4], BCSR4_ETH10_RST);
|
|
|
|
setbits32(&bcsr[1], BCSR1_ETHEN);
|
|
|
|
np = of_find_node_by_path("/soc@ff000000/cpm@9c0/serial@a80");
|
|
#else
|
|
np = of_find_node_by_path("/soc@ff000000/cpm@9c0/ethernet@a40");
|
|
#endif
|
|
|
|
/* The SCC3 enet registers overlap the SMC1 registers, so
|
|
* one of the two must be removed from the device tree.
|
|
*/
|
|
|
|
if (np) {
|
|
of_detach_node(np);
|
|
of_node_put(np);
|
|
}
|
|
|
|
#ifdef CONFIG_PCMCIA_M8XX
|
|
/* Set up board specific hook-ups.*/
|
|
m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup;
|
|
m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage;
|
|
#endif
|
|
}
|
|
|
|
static int __init mpc885ads_probe(void)
|
|
{
|
|
unsigned long root = of_get_flat_dt_root();
|
|
return of_flat_dt_is_compatible(root, "fsl,mpc885ads");
|
|
}
|
|
|
|
static struct of_device_id __initdata of_bus_ids[] = {
|
|
{ .name = "soc", },
|
|
{ .name = "cpm", },
|
|
{ .name = "localbus", },
|
|
{},
|
|
};
|
|
|
|
static int __init declare_of_platform_devices(void)
|
|
{
|
|
/* Publish the QE devices */
|
|
of_platform_bus_probe(NULL, of_bus_ids, NULL);
|
|
|
|
return 0;
|
|
}
|
|
machine_device_initcall(mpc885_ads, declare_of_platform_devices);
|
|
|
|
define_machine(mpc885_ads) {
|
|
.name = "Freescale MPC885 ADS",
|
|
.probe = mpc885ads_probe,
|
|
.setup_arch = mpc885ads_setup_arch,
|
|
.init_IRQ = mpc8xx_pics_init,
|
|
.get_irq = mpc8xx_get_irq,
|
|
.restart = mpc8xx_restart,
|
|
.calibrate_decr = mpc8xx_calibrate_decr,
|
|
.set_rtc_time = mpc8xx_set_rtc_time,
|
|
.get_rtc_time = mpc8xx_get_rtc_time,
|
|
.progress = udbg_progress,
|
|
};
|