136 строки
4.8 KiB
Plaintext
136 строки
4.8 KiB
Plaintext
.------------------------------------------------------------------------------+
|
|
| Samsung USB 2.0 PHY adaptation layer |
|
|
+-----------------------------------------------------------------------------+'
|
|
|
|
| 1. Description
|
|
+----------------
|
|
|
|
The architecture of the USB 2.0 PHY module in Samsung SoCs is similar
|
|
among many SoCs. In spite of the similarities it proved difficult to
|
|
create a one driver that would fit all these PHY controllers. Often
|
|
the differences were minor and were found in particular bits of the
|
|
registers of the PHY. In some rare cases the order of register writes or
|
|
the PHY powering up process had to be altered. This adaptation layer is
|
|
a compromise between having separate drivers and having a single driver
|
|
with added support for many special cases.
|
|
|
|
| 2. Files description
|
|
+----------------------
|
|
|
|
- phy-samsung-usb2.c
|
|
This is the main file of the adaptation layer. This file contains
|
|
the probe function and provides two callbacks to the Generic PHY
|
|
Framework. This two callbacks are used to power on and power off the
|
|
phy. They carry out the common work that has to be done on all version
|
|
of the PHY module. Depending on which SoC was chosen they execute SoC
|
|
specific callbacks. The specific SoC version is selected by choosing
|
|
the appropriate compatible string. In addition, this file contains
|
|
struct of_device_id definitions for particular SoCs.
|
|
|
|
- phy-samsung-usb2.h
|
|
This is the include file. It declares the structures used by this
|
|
driver. In addition it should contain extern declarations for
|
|
structures that describe particular SoCs.
|
|
|
|
| 3. Supporting SoCs
|
|
+--------------------
|
|
|
|
To support a new SoC a new file should be added to the drivers/phy
|
|
directory. Each SoC's configuration is stored in an instance of the
|
|
struct samsung_usb2_phy_config.
|
|
|
|
struct samsung_usb2_phy_config {
|
|
const struct samsung_usb2_common_phy *phys;
|
|
int (*rate_to_clk)(unsigned long, u32 *);
|
|
unsigned int num_phys;
|
|
bool has_mode_switch;
|
|
};
|
|
|
|
The num_phys is the number of phys handled by the driver. *phys is an
|
|
array that contains the configuration for each phy. The has_mode_switch
|
|
property is a boolean flag that determines whether the SoC has USB host
|
|
and device on a single pair of pins. If so, a special register has to
|
|
be modified to change the internal routing of these pins between a USB
|
|
device or host module.
|
|
|
|
For example the configuration for Exynos 4210 is following:
|
|
|
|
const struct samsung_usb2_phy_config exynos4210_usb2_phy_config = {
|
|
.has_mode_switch = 0,
|
|
.num_phys = EXYNOS4210_NUM_PHYS,
|
|
.phys = exynos4210_phys,
|
|
.rate_to_clk = exynos4210_rate_to_clk,
|
|
}
|
|
|
|
- int (*rate_to_clk)(unsigned long, u32 *)
|
|
The rate_to_clk callback is to convert the rate of the clock
|
|
used as the reference clock for the PHY module to the value
|
|
that should be written in the hardware register.
|
|
|
|
The exynos4210_phys configuration array is as follows:
|
|
|
|
static const struct samsung_usb2_common_phy exynos4210_phys[] = {
|
|
{
|
|
.label = "device",
|
|
.id = EXYNOS4210_DEVICE,
|
|
.power_on = exynos4210_power_on,
|
|
.power_off = exynos4210_power_off,
|
|
},
|
|
{
|
|
.label = "host",
|
|
.id = EXYNOS4210_HOST,
|
|
.power_on = exynos4210_power_on,
|
|
.power_off = exynos4210_power_off,
|
|
},
|
|
{
|
|
.label = "hsic0",
|
|
.id = EXYNOS4210_HSIC0,
|
|
.power_on = exynos4210_power_on,
|
|
.power_off = exynos4210_power_off,
|
|
},
|
|
{
|
|
.label = "hsic1",
|
|
.id = EXYNOS4210_HSIC1,
|
|
.power_on = exynos4210_power_on,
|
|
.power_off = exynos4210_power_off,
|
|
},
|
|
{},
|
|
};
|
|
|
|
- int (*power_on)(struct samsung_usb2_phy_instance *);
|
|
- int (*power_off)(struct samsung_usb2_phy_instance *);
|
|
These two callbacks are used to power on and power off the phy
|
|
by modifying appropriate registers.
|
|
|
|
Final change to the driver is adding appropriate compatible value to the
|
|
phy-samsung-usb2.c file. In case of Exynos 4210 the following lines were
|
|
added to the struct of_device_id samsung_usb2_phy_of_match[] array:
|
|
|
|
#ifdef CONFIG_PHY_EXYNOS4210_USB2
|
|
{
|
|
.compatible = "samsung,exynos4210-usb2-phy",
|
|
.data = &exynos4210_usb2_phy_config,
|
|
},
|
|
#endif
|
|
|
|
To add further flexibility to the driver the Kconfig file enables to
|
|
include support for selected SoCs in the compiled driver. The Kconfig
|
|
entry for Exynos 4210 is following:
|
|
|
|
config PHY_EXYNOS4210_USB2
|
|
bool "Support for Exynos 4210"
|
|
depends on PHY_SAMSUNG_USB2
|
|
depends on CPU_EXYNOS4210
|
|
help
|
|
Enable USB PHY support for Exynos 4210. This option requires that
|
|
Samsung USB 2.0 PHY driver is enabled and means that support for this
|
|
particular SoC is compiled in the driver. In case of Exynos 4210 four
|
|
phys are available - device, host, HSCI0 and HSCI1.
|
|
|
|
The newly created file that supports the new SoC has to be also added to the
|
|
Makefile. In case of Exynos 4210 the added line is following:
|
|
|
|
obj-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
|
|
|
|
After completing these steps the support for the new SoC should be ready.
|