705 строки
19 KiB
C
705 строки
19 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
|
|
* Copyright (c) 2020 Linaro Ltd.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
#include "../core.h"
|
|
#include "../pinctrl-utils.h"
|
|
|
|
#define LPI_SLEW_RATE_CTL_REG 0xa000
|
|
#define LPI_TLMM_REG_OFFSET 0x1000
|
|
#define LPI_SLEW_RATE_MAX 0x03
|
|
#define LPI_SLEW_BITS_SIZE 0x02
|
|
#define LPI_SLEW_RATE_MASK GENMASK(1, 0)
|
|
#define LPI_GPIO_CFG_REG 0x00
|
|
#define LPI_GPIO_PULL_MASK GENMASK(1, 0)
|
|
#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2)
|
|
#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6)
|
|
#define LPI_GPIO_OE_MASK BIT(9)
|
|
#define LPI_GPIO_VALUE_REG 0x04
|
|
#define LPI_GPIO_VALUE_IN_MASK BIT(0)
|
|
#define LPI_GPIO_VALUE_OUT_MASK BIT(1)
|
|
|
|
#define LPI_GPIO_BIAS_DISABLE 0x0
|
|
#define LPI_GPIO_PULL_DOWN 0x1
|
|
#define LPI_GPIO_KEEPER 0x2
|
|
#define LPI_GPIO_PULL_UP 0x3
|
|
#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1)
|
|
#define NO_SLEW -1
|
|
|
|
#define LPI_FUNCTION(fname) \
|
|
[LPI_MUX_##fname] = { \
|
|
.name = #fname, \
|
|
.groups = fname##_groups, \
|
|
.ngroups = ARRAY_SIZE(fname##_groups), \
|
|
}
|
|
|
|
#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \
|
|
{ \
|
|
.name = "gpio" #id, \
|
|
.pins = gpio##id##_pins, \
|
|
.pin = id, \
|
|
.slew_offset = soff, \
|
|
.npins = ARRAY_SIZE(gpio##id##_pins), \
|
|
.funcs = (int[]){ \
|
|
LPI_MUX_gpio, \
|
|
LPI_MUX_##f1, \
|
|
LPI_MUX_##f2, \
|
|
LPI_MUX_##f3, \
|
|
LPI_MUX_##f4, \
|
|
}, \
|
|
.nfuncs = 5, \
|
|
}
|
|
|
|
struct lpi_pingroup {
|
|
const char *name;
|
|
const unsigned int *pins;
|
|
unsigned int npins;
|
|
unsigned int pin;
|
|
/* Bit offset in slew register for SoundWire pins only */
|
|
int slew_offset;
|
|
unsigned int *funcs;
|
|
unsigned int nfuncs;
|
|
};
|
|
|
|
struct lpi_function {
|
|
const char *name;
|
|
const char * const *groups;
|
|
unsigned int ngroups;
|
|
};
|
|
|
|
struct lpi_pinctrl_variant_data {
|
|
const struct pinctrl_pin_desc *pins;
|
|
int npins;
|
|
const struct lpi_pingroup *groups;
|
|
int ngroups;
|
|
const struct lpi_function *functions;
|
|
int nfunctions;
|
|
};
|
|
|
|
#define MAX_LPI_NUM_CLKS 2
|
|
|
|
struct lpi_pinctrl {
|
|
struct device *dev;
|
|
struct pinctrl_dev *ctrl;
|
|
struct gpio_chip chip;
|
|
struct pinctrl_desc desc;
|
|
char __iomem *tlmm_base;
|
|
char __iomem *slew_base;
|
|
struct clk_bulk_data clks[MAX_LPI_NUM_CLKS];
|
|
/* Protects from concurrent register updates */
|
|
struct mutex lock;
|
|
const struct lpi_pinctrl_variant_data *data;
|
|
};
|
|
|
|
/* sm8250 variant specific data */
|
|
static const struct pinctrl_pin_desc sm8250_lpi_pins[] = {
|
|
PINCTRL_PIN(0, "gpio0"),
|
|
PINCTRL_PIN(1, "gpio1"),
|
|
PINCTRL_PIN(2, "gpio2"),
|
|
PINCTRL_PIN(3, "gpio3"),
|
|
PINCTRL_PIN(4, "gpio4"),
|
|
PINCTRL_PIN(5, "gpio5"),
|
|
PINCTRL_PIN(6, "gpio6"),
|
|
PINCTRL_PIN(7, "gpio7"),
|
|
PINCTRL_PIN(8, "gpio8"),
|
|
PINCTRL_PIN(9, "gpio9"),
|
|
PINCTRL_PIN(10, "gpio10"),
|
|
PINCTRL_PIN(11, "gpio11"),
|
|
PINCTRL_PIN(12, "gpio12"),
|
|
PINCTRL_PIN(13, "gpio13"),
|
|
};
|
|
|
|
enum sm8250_lpi_functions {
|
|
LPI_MUX_dmic1_clk,
|
|
LPI_MUX_dmic1_data,
|
|
LPI_MUX_dmic2_clk,
|
|
LPI_MUX_dmic2_data,
|
|
LPI_MUX_dmic3_clk,
|
|
LPI_MUX_dmic3_data,
|
|
LPI_MUX_i2s1_clk,
|
|
LPI_MUX_i2s1_data,
|
|
LPI_MUX_i2s1_ws,
|
|
LPI_MUX_i2s2_clk,
|
|
LPI_MUX_i2s2_data,
|
|
LPI_MUX_i2s2_ws,
|
|
LPI_MUX_qua_mi2s_data,
|
|
LPI_MUX_qua_mi2s_sclk,
|
|
LPI_MUX_qua_mi2s_ws,
|
|
LPI_MUX_swr_rx_clk,
|
|
LPI_MUX_swr_rx_data,
|
|
LPI_MUX_swr_tx_clk,
|
|
LPI_MUX_swr_tx_data,
|
|
LPI_MUX_wsa_swr_clk,
|
|
LPI_MUX_wsa_swr_data,
|
|
LPI_MUX_gpio,
|
|
LPI_MUX__,
|
|
};
|
|
|
|
static const unsigned int gpio0_pins[] = { 0 };
|
|
static const unsigned int gpio1_pins[] = { 1 };
|
|
static const unsigned int gpio2_pins[] = { 2 };
|
|
static const unsigned int gpio3_pins[] = { 3 };
|
|
static const unsigned int gpio4_pins[] = { 4 };
|
|
static const unsigned int gpio5_pins[] = { 5 };
|
|
static const unsigned int gpio6_pins[] = { 6 };
|
|
static const unsigned int gpio7_pins[] = { 7 };
|
|
static const unsigned int gpio8_pins[] = { 8 };
|
|
static const unsigned int gpio9_pins[] = { 9 };
|
|
static const unsigned int gpio10_pins[] = { 10 };
|
|
static const unsigned int gpio11_pins[] = { 11 };
|
|
static const unsigned int gpio12_pins[] = { 12 };
|
|
static const unsigned int gpio13_pins[] = { 13 };
|
|
static const char * const swr_tx_clk_groups[] = { "gpio0" };
|
|
static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" };
|
|
static const char * const swr_rx_clk_groups[] = { "gpio3" };
|
|
static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
|
|
static const char * const dmic1_clk_groups[] = { "gpio6" };
|
|
static const char * const dmic1_data_groups[] = { "gpio7" };
|
|
static const char * const dmic2_clk_groups[] = { "gpio8" };
|
|
static const char * const dmic2_data_groups[] = { "gpio9" };
|
|
static const char * const i2s2_clk_groups[] = { "gpio10" };
|
|
static const char * const i2s2_ws_groups[] = { "gpio11" };
|
|
static const char * const dmic3_clk_groups[] = { "gpio12" };
|
|
static const char * const dmic3_data_groups[] = { "gpio13" };
|
|
static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
|
|
static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
|
|
static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" };
|
|
static const char * const i2s1_clk_groups[] = { "gpio6" };
|
|
static const char * const i2s1_ws_groups[] = { "gpio7" };
|
|
static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
|
|
static const char * const wsa_swr_clk_groups[] = { "gpio10" };
|
|
static const char * const wsa_swr_data_groups[] = { "gpio11" };
|
|
static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" };
|
|
|
|
static const struct lpi_pingroup sm8250_groups[] = {
|
|
LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
|
|
LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
|
|
LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
|
|
LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
|
|
LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
|
|
LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _),
|
|
LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _),
|
|
LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _),
|
|
LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _),
|
|
LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _),
|
|
LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
|
|
LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
|
|
LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _),
|
|
LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _),
|
|
};
|
|
|
|
static const struct lpi_function sm8250_functions[] = {
|
|
LPI_FUNCTION(dmic1_clk),
|
|
LPI_FUNCTION(dmic1_data),
|
|
LPI_FUNCTION(dmic2_clk),
|
|
LPI_FUNCTION(dmic2_data),
|
|
LPI_FUNCTION(dmic3_clk),
|
|
LPI_FUNCTION(dmic3_data),
|
|
LPI_FUNCTION(i2s1_clk),
|
|
LPI_FUNCTION(i2s1_data),
|
|
LPI_FUNCTION(i2s1_ws),
|
|
LPI_FUNCTION(i2s2_clk),
|
|
LPI_FUNCTION(i2s2_data),
|
|
LPI_FUNCTION(i2s2_ws),
|
|
LPI_FUNCTION(qua_mi2s_data),
|
|
LPI_FUNCTION(qua_mi2s_sclk),
|
|
LPI_FUNCTION(qua_mi2s_ws),
|
|
LPI_FUNCTION(swr_rx_clk),
|
|
LPI_FUNCTION(swr_rx_data),
|
|
LPI_FUNCTION(swr_tx_clk),
|
|
LPI_FUNCTION(swr_tx_data),
|
|
LPI_FUNCTION(wsa_swr_clk),
|
|
LPI_FUNCTION(wsa_swr_data),
|
|
};
|
|
|
|
static struct lpi_pinctrl_variant_data sm8250_lpi_data = {
|
|
.pins = sm8250_lpi_pins,
|
|
.npins = ARRAY_SIZE(sm8250_lpi_pins),
|
|
.groups = sm8250_groups,
|
|
.ngroups = ARRAY_SIZE(sm8250_groups),
|
|
.functions = sm8250_functions,
|
|
.nfunctions = ARRAY_SIZE(sm8250_functions),
|
|
};
|
|
|
|
static int lpi_gpio_read(struct lpi_pinctrl *state, unsigned int pin,
|
|
unsigned int addr)
|
|
{
|
|
return ioread32(state->tlmm_base + LPI_TLMM_REG_OFFSET * pin + addr);
|
|
}
|
|
|
|
static int lpi_gpio_write(struct lpi_pinctrl *state, unsigned int pin,
|
|
unsigned int addr, unsigned int val)
|
|
{
|
|
iowrite32(val, state->tlmm_base + LPI_TLMM_REG_OFFSET * pin + addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lpi_gpio_get_groups_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pctrl->data->ngroups;
|
|
}
|
|
|
|
static const char *lpi_gpio_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned int group)
|
|
{
|
|
struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pctrl->data->groups[group].name;
|
|
}
|
|
|
|
static int lpi_gpio_get_group_pins(struct pinctrl_dev *pctldev,
|
|
unsigned int group,
|
|
const unsigned int **pins,
|
|
unsigned int *num_pins)
|
|
{
|
|
struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*pins = pctrl->data->groups[group].pins;
|
|
*num_pins = pctrl->data->groups[group].npins;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinctrl_ops lpi_gpio_pinctrl_ops = {
|
|
.get_groups_count = lpi_gpio_get_groups_count,
|
|
.get_group_name = lpi_gpio_get_group_name,
|
|
.get_group_pins = lpi_gpio_get_group_pins,
|
|
.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
|
|
.dt_free_map = pinctrl_utils_free_map,
|
|
};
|
|
|
|
static int lpi_gpio_get_functions_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pctrl->data->nfunctions;
|
|
}
|
|
|
|
static const char *lpi_gpio_get_function_name(struct pinctrl_dev *pctldev,
|
|
unsigned int function)
|
|
{
|
|
struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pctrl->data->functions[function].name;
|
|
}
|
|
|
|
static int lpi_gpio_get_function_groups(struct pinctrl_dev *pctldev,
|
|
unsigned int function,
|
|
const char *const **groups,
|
|
unsigned *const num_qgroups)
|
|
{
|
|
struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*groups = pctrl->data->functions[function].groups;
|
|
*num_qgroups = pctrl->data->functions[function].ngroups;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lpi_gpio_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
|
|
unsigned int group_num)
|
|
{
|
|
struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
const struct lpi_pingroup *g = &pctrl->data->groups[group_num];
|
|
u32 val;
|
|
int i, pin = g->pin;
|
|
|
|
for (i = 0; i < g->nfuncs; i++) {
|
|
if (g->funcs[i] == function)
|
|
break;
|
|
}
|
|
|
|
if (WARN_ON(i == g->nfuncs))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&pctrl->lock);
|
|
val = lpi_gpio_read(pctrl, pin, LPI_GPIO_CFG_REG);
|
|
u32p_replace_bits(&val, i, LPI_GPIO_FUNCTION_MASK);
|
|
lpi_gpio_write(pctrl, pin, LPI_GPIO_CFG_REG, val);
|
|
mutex_unlock(&pctrl->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinmux_ops lpi_gpio_pinmux_ops = {
|
|
.get_functions_count = lpi_gpio_get_functions_count,
|
|
.get_function_name = lpi_gpio_get_function_name,
|
|
.get_function_groups = lpi_gpio_get_function_groups,
|
|
.set_mux = lpi_gpio_set_mux,
|
|
};
|
|
|
|
static int lpi_config_get(struct pinctrl_dev *pctldev,
|
|
unsigned int pin, unsigned long *config)
|
|
{
|
|
unsigned int param = pinconf_to_config_param(*config);
|
|
struct lpi_pinctrl *state = dev_get_drvdata(pctldev->dev);
|
|
unsigned int arg = 0;
|
|
int is_out;
|
|
int pull;
|
|
u32 ctl_reg;
|
|
|
|
ctl_reg = lpi_gpio_read(state, pin, LPI_GPIO_CFG_REG);
|
|
is_out = ctl_reg & LPI_GPIO_OE_MASK;
|
|
pull = FIELD_GET(LPI_GPIO_PULL_MASK, ctl_reg);
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
if (pull == LPI_GPIO_BIAS_DISABLE)
|
|
arg = 1;
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
if (pull == LPI_GPIO_PULL_DOWN)
|
|
arg = 1;
|
|
break;
|
|
case PIN_CONFIG_BIAS_BUS_HOLD:
|
|
if (pull == LPI_GPIO_KEEPER)
|
|
arg = 1;
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
if (pull == LPI_GPIO_PULL_UP)
|
|
arg = 1;
|
|
break;
|
|
case PIN_CONFIG_INPUT_ENABLE:
|
|
case PIN_CONFIG_OUTPUT:
|
|
if (is_out)
|
|
arg = 1;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
*config = pinconf_to_config_packed(param, arg);
|
|
return 0;
|
|
}
|
|
|
|
static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group,
|
|
unsigned long *configs, unsigned int nconfs)
|
|
{
|
|
struct lpi_pinctrl *pctrl = dev_get_drvdata(pctldev->dev);
|
|
unsigned int param, arg, pullup = LPI_GPIO_BIAS_DISABLE, strength = 2;
|
|
bool value, output_enabled = false;
|
|
const struct lpi_pingroup *g;
|
|
unsigned long sval;
|
|
int i, slew_offset;
|
|
u32 val;
|
|
|
|
g = &pctrl->data->groups[group];
|
|
for (i = 0; i < nconfs; i++) {
|
|
param = pinconf_to_config_param(configs[i]);
|
|
arg = pinconf_to_config_argument(configs[i]);
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
pullup = LPI_GPIO_BIAS_DISABLE;
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
pullup = LPI_GPIO_PULL_DOWN;
|
|
break;
|
|
case PIN_CONFIG_BIAS_BUS_HOLD:
|
|
pullup = LPI_GPIO_KEEPER;
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
pullup = LPI_GPIO_PULL_UP;
|
|
break;
|
|
case PIN_CONFIG_INPUT_ENABLE:
|
|
output_enabled = false;
|
|
break;
|
|
case PIN_CONFIG_OUTPUT:
|
|
output_enabled = true;
|
|
value = arg;
|
|
break;
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
strength = arg;
|
|
break;
|
|
case PIN_CONFIG_SLEW_RATE:
|
|
if (arg > LPI_SLEW_RATE_MAX) {
|
|
dev_err(pctldev->dev, "invalid slew rate %u for pin: %d\n",
|
|
arg, group);
|
|
return -EINVAL;
|
|
}
|
|
|
|
slew_offset = g->slew_offset;
|
|
if (slew_offset == NO_SLEW)
|
|
break;
|
|
|
|
mutex_lock(&pctrl->lock);
|
|
|
|
sval = ioread32(pctrl->slew_base + LPI_SLEW_RATE_CTL_REG);
|
|
sval &= ~(LPI_SLEW_RATE_MASK << slew_offset);
|
|
sval |= arg << slew_offset;
|
|
iowrite32(sval, pctrl->slew_base + LPI_SLEW_RATE_CTL_REG);
|
|
|
|
mutex_unlock(&pctrl->lock);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* As per Hardware Programming Guide, when configuring pin as output,
|
|
* set the pin value before setting output-enable (OE).
|
|
*/
|
|
if (output_enabled) {
|
|
val = u32_encode_bits(value ? 1 : 0, LPI_GPIO_VALUE_OUT_MASK);
|
|
lpi_gpio_write(pctrl, group, LPI_GPIO_VALUE_REG, val);
|
|
}
|
|
|
|
mutex_lock(&pctrl->lock);
|
|
val = lpi_gpio_read(pctrl, group, LPI_GPIO_CFG_REG);
|
|
|
|
u32p_replace_bits(&val, pullup, LPI_GPIO_PULL_MASK);
|
|
u32p_replace_bits(&val, LPI_GPIO_DS_TO_VAL(strength),
|
|
LPI_GPIO_OUT_STRENGTH_MASK);
|
|
u32p_replace_bits(&val, output_enabled, LPI_GPIO_OE_MASK);
|
|
|
|
lpi_gpio_write(pctrl, group, LPI_GPIO_CFG_REG, val);
|
|
mutex_unlock(&pctrl->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinconf_ops lpi_gpio_pinconf_ops = {
|
|
.is_generic = true,
|
|
.pin_config_group_get = lpi_config_get,
|
|
.pin_config_group_set = lpi_config_set,
|
|
};
|
|
|
|
static int lpi_gpio_direction_input(struct gpio_chip *chip, unsigned int pin)
|
|
{
|
|
struct lpi_pinctrl *state = gpiochip_get_data(chip);
|
|
unsigned long config;
|
|
|
|
config = pinconf_to_config_packed(PIN_CONFIG_INPUT_ENABLE, 1);
|
|
|
|
return lpi_config_set(state->ctrl, pin, &config, 1);
|
|
}
|
|
|
|
static int lpi_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned int pin, int val)
|
|
{
|
|
struct lpi_pinctrl *state = gpiochip_get_data(chip);
|
|
unsigned long config;
|
|
|
|
config = pinconf_to_config_packed(PIN_CONFIG_OUTPUT, val);
|
|
|
|
return lpi_config_set(state->ctrl, pin, &config, 1);
|
|
}
|
|
|
|
static int lpi_gpio_get(struct gpio_chip *chip, unsigned int pin)
|
|
{
|
|
struct lpi_pinctrl *state = gpiochip_get_data(chip);
|
|
|
|
return lpi_gpio_read(state, pin, LPI_GPIO_VALUE_REG) &
|
|
LPI_GPIO_VALUE_IN_MASK;
|
|
}
|
|
|
|
static void lpi_gpio_set(struct gpio_chip *chip, unsigned int pin, int value)
|
|
{
|
|
struct lpi_pinctrl *state = gpiochip_get_data(chip);
|
|
unsigned long config;
|
|
|
|
config = pinconf_to_config_packed(PIN_CONFIG_OUTPUT, value);
|
|
|
|
lpi_config_set(state->ctrl, pin, &config, 1);
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
#include <linux/seq_file.h>
|
|
|
|
static unsigned int lpi_regval_to_drive(u32 val)
|
|
{
|
|
return (val + 1) * 2;
|
|
}
|
|
|
|
static void lpi_gpio_dbg_show_one(struct seq_file *s,
|
|
struct pinctrl_dev *pctldev,
|
|
struct gpio_chip *chip,
|
|
unsigned int offset,
|
|
unsigned int gpio)
|
|
{
|
|
struct lpi_pinctrl *state = gpiochip_get_data(chip);
|
|
struct pinctrl_pin_desc pindesc;
|
|
unsigned int func;
|
|
int is_out;
|
|
int drive;
|
|
int pull;
|
|
u32 ctl_reg;
|
|
|
|
static const char * const pulls[] = {
|
|
"no pull",
|
|
"pull down",
|
|
"keeper",
|
|
"pull up"
|
|
};
|
|
|
|
pctldev = pctldev ? : state->ctrl;
|
|
pindesc = pctldev->desc->pins[offset];
|
|
ctl_reg = lpi_gpio_read(state, offset, LPI_GPIO_CFG_REG);
|
|
is_out = ctl_reg & LPI_GPIO_OE_MASK;
|
|
|
|
func = FIELD_GET(LPI_GPIO_FUNCTION_MASK, ctl_reg);
|
|
drive = FIELD_GET(LPI_GPIO_OUT_STRENGTH_MASK, ctl_reg);
|
|
pull = FIELD_GET(LPI_GPIO_PULL_MASK, ctl_reg);
|
|
|
|
seq_printf(s, " %-8s: %-3s %d", pindesc.name, is_out ? "out" : "in", func);
|
|
seq_printf(s, " %dmA", lpi_regval_to_drive(drive));
|
|
seq_printf(s, " %s", pulls[pull]);
|
|
}
|
|
|
|
static void lpi_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
|
|
{
|
|
unsigned int gpio = chip->base;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < chip->ngpio; i++, gpio++) {
|
|
lpi_gpio_dbg_show_one(s, NULL, chip, i, gpio);
|
|
seq_puts(s, "\n");
|
|
}
|
|
}
|
|
|
|
#else
|
|
#define lpi_gpio_dbg_show NULL
|
|
#endif
|
|
|
|
static const struct gpio_chip lpi_gpio_template = {
|
|
.direction_input = lpi_gpio_direction_input,
|
|
.direction_output = lpi_gpio_direction_output,
|
|
.get = lpi_gpio_get,
|
|
.set = lpi_gpio_set,
|
|
.request = gpiochip_generic_request,
|
|
.free = gpiochip_generic_free,
|
|
.dbg_show = lpi_gpio_dbg_show,
|
|
};
|
|
|
|
static int lpi_pinctrl_probe(struct platform_device *pdev)
|
|
{
|
|
const struct lpi_pinctrl_variant_data *data;
|
|
struct device *dev = &pdev->dev;
|
|
struct lpi_pinctrl *pctrl;
|
|
int ret;
|
|
|
|
pctrl = devm_kzalloc(dev, sizeof(*pctrl), GFP_KERNEL);
|
|
if (!pctrl)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, pctrl);
|
|
|
|
data = of_device_get_match_data(dev);
|
|
if (!data)
|
|
return -EINVAL;
|
|
|
|
pctrl->data = data;
|
|
pctrl->dev = &pdev->dev;
|
|
|
|
pctrl->clks[0].id = "core";
|
|
pctrl->clks[1].id = "audio";
|
|
|
|
pctrl->tlmm_base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(pctrl->tlmm_base))
|
|
return dev_err_probe(dev, PTR_ERR(pctrl->tlmm_base),
|
|
"TLMM resource not provided\n");
|
|
|
|
pctrl->slew_base = devm_platform_ioremap_resource(pdev, 1);
|
|
if (IS_ERR(pctrl->slew_base))
|
|
return dev_err_probe(dev, PTR_ERR(pctrl->slew_base),
|
|
"Slew resource not provided\n");
|
|
|
|
ret = devm_clk_bulk_get(dev, MAX_LPI_NUM_CLKS, pctrl->clks);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "Can't get clocks\n");
|
|
|
|
ret = clk_bulk_prepare_enable(MAX_LPI_NUM_CLKS, pctrl->clks);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "Can't enable clocks\n");
|
|
|
|
pctrl->desc.pctlops = &lpi_gpio_pinctrl_ops;
|
|
pctrl->desc.pmxops = &lpi_gpio_pinmux_ops;
|
|
pctrl->desc.confops = &lpi_gpio_pinconf_ops;
|
|
pctrl->desc.owner = THIS_MODULE;
|
|
pctrl->desc.name = dev_name(dev);
|
|
pctrl->desc.pins = data->pins;
|
|
pctrl->desc.npins = data->npins;
|
|
pctrl->chip = lpi_gpio_template;
|
|
pctrl->chip.parent = dev;
|
|
pctrl->chip.base = -1;
|
|
pctrl->chip.ngpio = data->npins;
|
|
pctrl->chip.label = dev_name(dev);
|
|
pctrl->chip.of_gpio_n_cells = 2;
|
|
pctrl->chip.can_sleep = false;
|
|
|
|
mutex_init(&pctrl->lock);
|
|
|
|
pctrl->ctrl = devm_pinctrl_register(dev, &pctrl->desc, pctrl);
|
|
if (IS_ERR(pctrl->ctrl)) {
|
|
ret = PTR_ERR(pctrl->ctrl);
|
|
dev_err(dev, "failed to add pin controller\n");
|
|
goto err_pinctrl;
|
|
}
|
|
|
|
ret = devm_gpiochip_add_data(dev, &pctrl->chip, pctrl);
|
|
if (ret) {
|
|
dev_err(pctrl->dev, "can't add gpio chip\n");
|
|
goto err_pinctrl;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_pinctrl:
|
|
mutex_destroy(&pctrl->lock);
|
|
clk_bulk_disable_unprepare(MAX_LPI_NUM_CLKS, pctrl->clks);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lpi_pinctrl_remove(struct platform_device *pdev)
|
|
{
|
|
struct lpi_pinctrl *pctrl = platform_get_drvdata(pdev);
|
|
|
|
mutex_destroy(&pctrl->lock);
|
|
clk_bulk_disable_unprepare(MAX_LPI_NUM_CLKS, pctrl->clks);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id lpi_pinctrl_of_match[] = {
|
|
{
|
|
.compatible = "qcom,sm8250-lpass-lpi-pinctrl",
|
|
.data = &sm8250_lpi_data,
|
|
},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
|
|
|
|
static struct platform_driver lpi_pinctrl_driver = {
|
|
.driver = {
|
|
.name = "qcom-lpass-lpi-pinctrl",
|
|
.of_match_table = lpi_pinctrl_of_match,
|
|
},
|
|
.probe = lpi_pinctrl_probe,
|
|
.remove = lpi_pinctrl_remove,
|
|
};
|
|
|
|
module_platform_driver(lpi_pinctrl_driver);
|
|
MODULE_DESCRIPTION("QTI LPI GPIO pin control driver");
|
|
MODULE_LICENSE("GPL");
|