WSL2-Linux-Kernel/drivers/mux
Linus Torvalds 114b5f8f7e This is the bulk of GPIO changes for the v4.20 series:
Core changes:
 
 - A patch series from Hans Verkuil to make it possible to
   enable/disable IRQs on a GPIO line at runtime and drive GPIO
   lines as output without having to put/get them from scratch.
   The irqchip callbacks have been improved so that they can
   use only the fastpatch callbacks to enable/disable irqs
   like any normal irqchip, especially the gpiod_lock_as_irq()
   has been improved to be callable in fastpath context.
   A bunch of rework had to be done to achieve this but it is
   a big win since I never liked to restrict this to slowpath.
   The only call requireing slowpath was try_module_get() and
   this is kept at the .request_resources() slowpath callback.
   In the GPIO CEC driver this is a big win sine a single
   line is used for both outgoing and incoming traffic, and
   this needs to use IRQs for incoming traffic while actively
   driving the line for outgoing traffic.
 
 - Janusz Krzysztofik improved the GPIO array API to pass a
   "cookie" (struct gpio_array) and a bitmap for setting or
   getting multiple GPIO lines at once. This improvement
   orginated in a specific need to speed up an OMAP1 driver and
   has led to a much better API and real performance gains
   when the state of the array can be used to bypass a lot
   of checks and code when we want things to go really fast.
   The previous code would minimize the number of calls
   down to the driver callbacks assuming the CPU speed was
   orders of magnitude faster than the I/O latency, but this
   assumption was wrong on several platforms: what we needed
   to do was to profile and improve the speed on the hot
   path of the array functions and this change is now
   completed.
 
 - Clean out the painful and hard to grasp BNF experiments
   from the device tree bindings. Future approaches are looking
   into using JSON schema for this purpose. (Rob Herring
   is floating a patch series.)
 
 New drivers:
 
 - The RCAR driver now supports r8a774a1 (RZ/G2M).
 
 - Synopsys GPIO via CREGs driver.
 
 Major improvements:
 
 - Modernization of the EP93xx driver to use irqdomain and
   other contemporary concepts.
 
 - The ingenic driver has been merged into the Ingenic pin
   control driver and removed from the GPIO subsystem.
 
 - Debounce support in the ftgpio010 driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbzdyOAAoJEEEQszewGV1zfYcP/0HBEAOPhHD/i5OQxfKs1msh
 mFT/t/IbTmRpCgbEv4CDx4Kc/InE0sUnQr1TL/1WvU6uObM6Ncxq5Z90MvyrgzYu
 BqQHq2k2tORvkVSNRxcfD/BAAoo1EerXts1kDhutvdKfepfS6DxpENwzvsFgkVlq
 2jj1cdZztjv8A+9cspHDpQP+jDvl1VSc10nR5fRu1TttSpUwzRJaB30NBNXJmMJc
 5KUr67lEbsQRPsBvFErU11bydPqhfT+pXmODcfIwS0EtATQ8WC5mkSb/Ooei0fvT
 oZ7uR3Os8tMf7isOKssEyFabKwhnfOEt6TBt9em0TfUtInOo0Dc7r8TfBcn57fyZ
 xg2R9DQEVRfac8bjhF/BI5KHuN9IMGDDvj6XApumQVliZbISRjMnh3jte6RpcV0A
 Ejqz8FeDY13qvEdOnW1EPpwmXdDVWiEAq0ebGLStKNls+/4gB2HmyxGUOzJf+og5
 hujsxcJzGQqjCe0moeY/1d7vsy0ZjbHoS+p5fy79U212y2O7onEzFU92AX89bxKC
 rx2eCNmiZxCUy1nqu8edO62VnH6QdnqG3o+a4DJfCSHPvFM/E/NX9zHemZubQQ4I
 rYXNy4bL4tEG9cqWMfBxWrpiDZw7H6l8kXwdZG8IMyRU9BcKu96amgZ+jBXwzoaB
 JZelAAUWB9APghJYFr7o
 =YosT
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.20 series:

  Core changes:

   - A patch series from Hans Verkuil to make it possible to
     enable/disable IRQs on a GPIO line at runtime and drive GPIO lines
     as output without having to put/get them from scratch.

     The irqchip callbacks have been improved so that they can use only
     the fastpatch callbacks to enable/disable irqs like any normal
     irqchip, especially the gpiod_lock_as_irq() has been improved to be
     callable in fastpath context.

     A bunch of rework had to be done to achieve this but it is a big
     win since I never liked to restrict this to slowpath. The only call
     requireing slowpath was try_module_get() and this is kept at the
     .request_resources() slowpath callback. In the GPIO CEC driver this
     is a big win sine a single line is used for both outgoing and
     incoming traffic, and this needs to use IRQs for incoming traffic
     while actively driving the line for outgoing traffic.

   - Janusz Krzysztofik improved the GPIO array API to pass a "cookie"
     (struct gpio_array) and a bitmap for setting or getting multiple
     GPIO lines at once.

     This improvement orginated in a specific need to speed up an OMAP1
     driver and has led to a much better API and real performance gains
     when the state of the array can be used to bypass a lot of checks
     and code when we want things to go really fast.

     The previous code would minimize the number of calls down to the
     driver callbacks assuming the CPU speed was orders of magnitude
     faster than the I/O latency, but this assumption was wrong on
     several platforms: what we needed to do was to profile and improve
     the speed on the hot path of the array functions and this change is
     now completed.

   - Clean out the painful and hard to grasp BNF experiments from the
     device tree bindings. Future approaches are looking into using JSON
     schema for this purpose. (Rob Herring is floating a patch series.)

  New drivers:

   - The RCAR driver now supports r8a774a1 (RZ/G2M).

   - Synopsys GPIO via CREGs driver.

  Major improvements:

   - Modernization of the EP93xx driver to use irqdomain and other
     contemporary concepts.

   - The ingenic driver has been merged into the Ingenic pin control
     driver and removed from the GPIO subsystem.

   - Debounce support in the ftgpio010 driver"

* tag 'gpio-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (116 commits)
  gpio: Clarify kerneldoc on gpiochip_set_chained_irqchip()
  gpio: Remove unused 'irqchip' argument to gpiochip_set_cascaded_irqchip()
  gpio: Drop parent irq assignment during cascade setup
  mmc: pwrseq_simple: Fix incorrect handling of GPIO bitmap
  gpio: fix SNPS_CREG kconfig dependency warning
  gpiolib: Initialize gdev field before is used
  gpio: fix kernel-doc after devres.c file rename
  gpio: fix doc string for devm_gpiochip_add_data() to not talk about irq_chip
  gpio: syscon: Fix possible NULL ptr usage
  gpiolib: Show correct direction from the beginning
  pinctrl: msm: Use init_valid_mask exported function
  gpiolib: Add init_valid_mask exported function
  GPIO: add single-register GPIO via CREG driver
  dt-bindings: Document the Synopsys GPIO via CREG bindings
  gpio: mockup: use device properties instead of platform_data
  gpio: Slightly more helpful debugfs
  gpio: omap: Remove set but not used variable 'dev'
  gpio: omap: drop omap_gpio_list
  Accept partial 'gpio-line-names' property.
  gpio: omap: get rid of the conditional PM runtime calls
  ...
2018-10-23 08:45:05 +01:00
..
Kconfig mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux 2018-08-02 10:23:02 +02:00
Makefile mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux 2018-08-02 10:23:02 +02:00
adg792a.c mux: adg792a: switch to using .probe_new 2018-04-23 13:31:27 +02:00
adgs1408.c mux: adgs1408: use the correct MODULE_LICENSE 2018-10-12 17:36:39 +02:00
core.c Char/Misc driver patches for 4.16-rc1 2018-02-01 10:31:17 -08:00
gpio.c gpiolib: Pass array info to get/set array functions 2018-09-13 11:16:54 +02:00
mmio.c mux: add SPDX identifiers to all mux source files 2018-01-09 16:51:44 +01:00