microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/arch/powerpc/kernel/entry_64.S

826 строки
19 KiB
ArmAsm
Исходник Ответственный История

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
* Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
* Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
* Adapted for Power Macintosh by Paul Mackerras.
* Low-level exception handlers and MMU support
* rewritten by Paul Mackerras.
* Copyright (C) 1996 Paul Mackerras.
* MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
*
* This file contains the system call entry code, context switch
* code, and exception/interrupt return code for PowerPC.
*/
#include <linux/errno.h>
#include <linux/err.h>
#include <asm/cache.h>
#include <asm/unistd.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/thread_info.h>
#include <asm/code-patching-asm.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
#include <asm/bug.h>
#include <asm/ptrace.h>
#include <asm/irqflags.h>
#include <asm/hw_irq.h>
#include <asm/context_tracking.h>
#include <asm/tm.h>
#include <asm/ppc-opcode.h>
#include <asm/barrier.h>
#include <asm/export.h>
#include <asm/asm-compat.h>
#ifdef CONFIG_PPC_BOOK3S
#include <asm/exception-64s.h>
#else
#include <asm/exception-64e.h>
#endif
#include <asm/feature-fixups.h>
#include <asm/kup.h>
/*
* System calls.
*/
.section ".toc","aw"
SYS_CALL_TABLE:
.tc sys_call_table[TC],sys_call_table
#ifdef CONFIG_COMPAT
COMPAT_SYS_CALL_TABLE:
.tc compat_sys_call_table[TC],compat_sys_call_table
#endif
/* This value is used to mark exception frames on the stack. */
exception_marker:
.tc ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER
.section ".text"
.align 7
.globl system_call_common
system_call_common:
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
BEGIN_FTR_SECTION
extrdi. r10, r12, 1, (63-MSR_TS_T_LG) /* transaction active? */
bne .Ltabort_syscall
END_FTR_SECTION_IFSET(CPU_FTR_TM)
#endif
_ASM_NOKPROBE_SYMBOL(system_call_common)
mr r10,r1
ld r1,PACAKSAVE(r13)
std r10,0(r1)
std r11,_NIP(r1)
std r12,_MSR(r1)
std r0,GPR0(r1)
std r10,GPR1(r1)
std r2,GPR2(r1)
#ifdef CONFIG_PPC_FSL_BOOK3E
START_BTB_FLUSH_SECTION
BTB_FLUSH(r10)
END_BTB_FLUSH_SECTION
#endif
ld r2,PACATOC(r13)
mfcr r12
li r11,0
/* Can we avoid saving r3-r8 in common case? */
std r3,GPR3(r1)
std r4,GPR4(r1)
std r5,GPR5(r1)
std r6,GPR6(r1)
std r7,GPR7(r1)
std r8,GPR8(r1)
/* Zero r9-r12, this should only be required when restoring all GPRs */
std r11,GPR9(r1)
std r11,GPR10(r1)
std r11,GPR11(r1)
std r11,GPR12(r1)
std r9,GPR13(r1)
SAVE_NVGPRS(r1)
std r11,_XER(r1)
std r11,_CTR(r1)
mflr r10
/*
* This clears CR0.SO (bit 28), which is the error indication on
* return from this system call.
*/
rldimi r12,r11,28,(63-28)
li r11,0xc00
std r10,_LINK(r1)
std r11,_TRAP(r1)
std r12,_CCR(r1)
std r3,ORIG_GPR3(r1)
addi r10,r1,STACK_FRAME_OVERHEAD
ld r11,exception_marker@toc(r2)
std r11,-16(r10) /* "regshere" marker */
/*
* RECONCILE_IRQ_STATE without calling trace_hardirqs_off(), which
* would clobber syscall parameters. Also we always enter with IRQs
* enabled and nothing pending. system_call_exception() will call
* trace_hardirqs_off().
*/
li r11,IRQS_ALL_DISABLED
li r12,PACA_IRQ_HARD_DIS
stb r11,PACAIRQSOFTMASK(r13)
stb r12,PACAIRQHAPPENED(r13)
/* Calling convention has r9 = orig r0, r10 = regs */
mr r9,r0
bl system_call_exception
.Lsyscall_exit:
addi r4,r1,STACK_FRAME_OVERHEAD
bl syscall_exit_prepare
ld r2,_CCR(r1)
ld r4,_NIP(r1)
ld r5,_MSR(r1)
ld r6,_LINK(r1)
BEGIN_FTR_SECTION
stdcx. r0,0,r1 /* to clear the reservation */
END_FTR_SECTION_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
mtspr SPRN_SRR0,r4
mtspr SPRN_SRR1,r5
mtlr r6
cmpdi r3,0
bne .Lsyscall_restore_regs
/* Zero volatile regs that may contain sensitive kernel data */
li r0,0
li r4,0
li r5,0
li r6,0
li r7,0
li r8,0
li r9,0
li r10,0
li r11,0
li r12,0
mtctr r0
mtspr SPRN_XER,r0
.Lsyscall_restore_regs_cont:
BEGIN_FTR_SECTION
HMT_MEDIUM_LOW
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
/*
* We don't need to restore AMR on the way back to userspace for KUAP.
* The value of AMR only matters while we're in the kernel.
*/
mtcr r2
ld r2,GPR2(r1)
ld r3,GPR3(r1)
ld r13,GPR13(r1)
ld r1,GPR1(r1)
RFI_TO_USER
b . /* prevent speculative execution */
.Lsyscall_restore_regs:
ld r3,_CTR(r1)
ld r4,_XER(r1)
REST_NVGPRS(r1)
mtctr r3
mtspr SPRN_XER,r4
ld r0,GPR0(r1)
REST_8GPRS(4, r1)
ld r12,GPR12(r1)
b .Lsyscall_restore_regs_cont
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
.Ltabort_syscall:
/* Firstly we need to enable TM in the kernel */
mfmsr r10
li r9, 1
rldimi r10, r9, MSR_TM_LG, 63-MSR_TM_LG
mtmsrd r10, 0
/* tabort, this dooms the transaction, nothing else */
li r9, (TM_CAUSE_SYSCALL|TM_CAUSE_PERSISTENT)
TABORT(R9)
/*
* Return directly to userspace. We have corrupted user register state,
* but userspace will never see that register state. Execution will
* resume after the tbegin of the aborted transaction with the
* checkpointed register state.
*/
li r9, MSR_RI
andc r10, r10, r9
mtmsrd r10, 1
mtspr SPRN_SRR0, r11
mtspr SPRN_SRR1, r12
RFI_TO_USER
b . /* prevent speculative execution */
#endif
_GLOBAL(ret_from_fork)
bl schedule_tail
REST_NVGPRS(r1)
li r3,0
b .Lsyscall_exit
_GLOBAL(ret_from_kernel_thread)
bl schedule_tail
REST_NVGPRS(r1)
mtlr r14
mr r3,r15
#ifdef PPC64_ELF_ABI_v2
mr r12,r14
#endif
blrl
li r3,0
b .Lsyscall_exit
#ifdef CONFIG_PPC_BOOK3E
/* Save non-volatile GPRs, if not already saved. */
_GLOBAL(save_nvgprs)
ld r11,_TRAP(r1)
andi. r0,r11,1
beqlr-
SAVE_NVGPRS(r1)
clrrdi r0,r11,1
std r0,_TRAP(r1)
blr
_ASM_NOKPROBE_SYMBOL(save_nvgprs);
#endif
#ifdef CONFIG_PPC_BOOK3S_64
#define FLUSH_COUNT_CACHE \
1: nop; \
patch_site 1b, patch__call_flush_count_cache
#define BCCTR_FLUSH .long 0x4c400420
.macro nops number
.rept \number
nop
.endr
.endm
.balign 32
.global flush_count_cache
flush_count_cache:
/* Save LR into r9 */
mflr r9
// Flush the link stack
.rept 64
bl .+4
.endr
b 1f
nops 6
.balign 32
/* Restore LR */
1: mtlr r9
// If we're just flushing the link stack, return here
3: nop
patch_site 3b patch__flush_link_stack_return
li r9,0x7fff
mtctr r9
BCCTR_FLUSH
2: nop
patch_site 2b patch__flush_count_cache_return
nops 3
.rept 278
.balign 32
BCCTR_FLUSH
nops 7
.endr
blr
#else
#define FLUSH_COUNT_CACHE
#endif /* CONFIG_PPC_BOOK3S_64 */
/*
* This routine switches between two different tasks. The process
* state of one is saved on its kernel stack. Then the state
* of the other is restored from its kernel stack. The memory
* management hardware is updated to the second process's state.
* Finally, we can return to the second process, via interrupt_return.
* On entry, r3 points to the THREAD for the current task, r4
* points to the THREAD for the new task.
*
* Note: there are two ways to get to the "going out" portion
* of this code; either by coming in via the entry (_switch)
* or via "fork" which must set up an environment equivalent
* to the "_switch" path. If you change this you'll have to change
* the fork code also.
*
* The code which creates the new task context is in 'copy_thread'
* in arch/powerpc/kernel/process.c
*/
.align 7
_GLOBAL(_switch)
mflr r0
std r0,16(r1)
stdu r1,-SWITCH_FRAME_SIZE(r1)
/* r3-r13 are caller saved -- Cort */
SAVE_NVGPRS(r1)
std r0,_NIP(r1) /* Return to switch caller */
mfcr r23
std r23,_CCR(r1)
std r1,KSP(r3) /* Set old stack pointer */
kuap_check_amr r9, r10
FLUSH_COUNT_CACHE
/*
* On SMP kernels, care must be taken because a task may be
* scheduled off CPUx and on to CPUy. Memory ordering must be
* considered.
*
* Cacheable stores on CPUx will be visible when the task is
* scheduled on CPUy by virtue of the core scheduler barriers
* (see "Notes on Program-Order guarantees on SMP systems." in
* kernel/sched/core.c).
*
* Uncacheable stores in the case of involuntary preemption must
* be taken care of. The smp_mb__before_spin_lock() in __schedule()
* is implemented as hwsync on powerpc, which orders MMIO too. So
* long as there is an hwsync in the context switch path, it will
* be executed on the source CPU after the task has performed
* all MMIO ops on that CPU, and on the destination CPU before the
* task performs any MMIO ops there.
*/
/*
* The kernel context switch path must contain a spin_lock,
* which contains larx/stcx, which will clear any reservation
* of the task being switched.
*/
#ifdef CONFIG_PPC_BOOK3S
/* Cancel all explict user streams as they will have no use after context
* switch and will stop the HW from creating streams itself
*/
DCBT_BOOK3S_STOP_ALL_STREAM_IDS(r6)
#endif
addi r6,r4,-THREAD /* Convert THREAD to 'current' */
std r6,PACACURRENT(r13) /* Set new 'current' */
#if defined(CONFIG_STACKPROTECTOR)
ld r6, TASK_CANARY(r6)
std r6, PACA_CANARY(r13)
#endif
ld r8,KSP(r4) /* new stack pointer */
#ifdef CONFIG_PPC_BOOK3S_64
BEGIN_MMU_FTR_SECTION
b 2f
END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX)
BEGIN_FTR_SECTION
clrrdi r6,r8,28 /* get its ESID */
clrrdi r9,r1,28 /* get current sp ESID */
FTR_SECTION_ELSE
clrrdi r6,r8,40 /* get its 1T ESID */
clrrdi r9,r1,40 /* get current sp 1T ESID */
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_1T_SEGMENT)
clrldi. r0,r6,2 /* is new ESID c00000000? */
cmpd cr1,r6,r9 /* or is new ESID the same as current ESID? */
cror eq,4*cr1+eq,eq
beq 2f /* if yes, don't slbie it */
/* Bolt in the new stack SLB entry */
ld r7,KSP_VSID(r4) /* Get new stack's VSID */
oris r0,r6,(SLB_ESID_V)@h
ori r0,r0,(SLB_NUM_BOLTED-1)@l
BEGIN_FTR_SECTION
li r9,MMU_SEGSIZE_1T /* insert B field */
oris r6,r6,(MMU_SEGSIZE_1T << SLBIE_SSIZE_SHIFT)@h
rldimi r7,r9,SLB_VSID_SSIZE_SHIFT,0
END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
/* Update the last bolted SLB. No write barriers are needed
* here, provided we only update the current CPU's SLB shadow
* buffer.
*/
ld r9,PACA_SLBSHADOWPTR(r13)
li r12,0
std r12,SLBSHADOW_STACKESID(r9) /* Clear ESID */
li r12,SLBSHADOW_STACKVSID
STDX_BE r7,r12,r9 /* Save VSID */
li r12,SLBSHADOW_STACKESID
STDX_BE r0,r12,r9 /* Save ESID */
/* No need to check for MMU_FTR_NO_SLBIE_B here, since when
* we have 1TB segments, the only CPUs known to have the errata
* only support less than 1TB of system memory and we'll never
* actually hit this code path.
*/
isync
slbie r6
BEGIN_FTR_SECTION
slbie r6 /* Workaround POWER5 < DD2.1 issue */
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
slbmte r7,r0
isync
2:
#endif /* CONFIG_PPC_BOOK3S_64 */
clrrdi r7, r8, THREAD_SHIFT /* base of new stack */
/* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE
because we don't need to leave the 288-byte ABI gap at the
top of the kernel stack. */
addi r7,r7,THREAD_SIZE-SWITCH_FRAME_SIZE
/*
* PMU interrupts in radix may come in here. They will use r1, not
* PACAKSAVE, so this stack switch will not cause a problem. They
* will store to the process stack, which may then be migrated to
* another CPU. However the rq lock release on this CPU paired with
* the rq lock acquire on the new CPU before the stack becomes
* active on the new CPU, will order those stores.
*/
mr r1,r8 /* start using new stack pointer */
std r7,PACAKSAVE(r13)
ld r6,_CCR(r1)
mtcrf 0xFF,r6
/* r3-r13 are destroyed -- Cort */
REST_NVGPRS(r1)
/* convert old thread to its task_struct for return value */
addi r3,r3,-THREAD
ld r7,_NIP(r1) /* Return to _switch caller in new task */
mtlr r7
addi r1,r1,SWITCH_FRAME_SIZE
blr
#ifdef CONFIG_PPC_BOOK3S
/*
* If MSR EE/RI was never enabled, IRQs not reconciled, NVGPRs not
* touched, AMR not set, no exit work created, then this can be used.
*/
.balign IFETCH_ALIGN_BYTES
.globl fast_interrupt_return
fast_interrupt_return:
_ASM_NOKPROBE_SYMBOL(fast_interrupt_return)
ld r4,_MSR(r1)
andi. r0,r4,MSR_PR
bne .Lfast_user_interrupt_return
andi. r0,r4,MSR_RI
li r3,0 /* 0 return value, no EMULATE_STACK_STORE */
bne+ .Lfast_kernel_interrupt_return
addi r3,r1,STACK_FRAME_OVERHEAD
bl unrecoverable_exception
b . /* should not get here */
.balign IFETCH_ALIGN_BYTES
.globl interrupt_return
interrupt_return:
_ASM_NOKPROBE_SYMBOL(interrupt_return)
ld r4,_MSR(r1)
andi. r0,r4,MSR_PR
beq .Lkernel_interrupt_return
addi r3,r1,STACK_FRAME_OVERHEAD
bl interrupt_exit_user_prepare
cmpdi r3,0
bne- .Lrestore_nvgprs
.Lfast_user_interrupt_return:
ld r11,_NIP(r1)
ld r12,_MSR(r1)
BEGIN_FTR_SECTION
ld r10,_PPR(r1)
mtspr SPRN_PPR,r10
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r12
BEGIN_FTR_SECTION
stdcx. r0,0,r1 /* to clear the reservation */
FTR_SECTION_ELSE
ldarx r0,0,r1
ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
ld r3,_CCR(r1)
ld r4,_LINK(r1)
ld r5,_CTR(r1)
ld r6,_XER(r1)
li r0,0
REST_4GPRS(7, r1)
REST_2GPRS(11, r1)
REST_GPR(13, r1)
mtcr r3
mtlr r4
mtctr r5
mtspr SPRN_XER,r6
REST_4GPRS(2, r1)
REST_GPR(6, r1)
REST_GPR(0, r1)
REST_GPR(1, r1)
RFI_TO_USER
b . /* prevent speculative execution */
.Lrestore_nvgprs:
REST_NVGPRS(r1)
b .Lfast_user_interrupt_return
.balign IFETCH_ALIGN_BYTES
.Lkernel_interrupt_return:
addi r3,r1,STACK_FRAME_OVERHEAD
bl interrupt_exit_kernel_prepare
.Lfast_kernel_interrupt_return:
cmpdi cr1,r3,0
ld r11,_NIP(r1)
ld r12,_MSR(r1)
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r12
BEGIN_FTR_SECTION
stdcx. r0,0,r1 /* to clear the reservation */
FTR_SECTION_ELSE
ldarx r0,0,r1
ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
ld r3,_LINK(r1)
ld r4,_CTR(r1)
ld r5,_XER(r1)
ld r6,_CCR(r1)
li r0,0
REST_4GPRS(7, r1)
REST_2GPRS(11, r1)
mtlr r3
mtctr r4
mtspr SPRN_XER,r5
/*
* Leaving a stale exception_marker on the stack can confuse
* the reliable stack unwinder later on. Clear it.
*/
std r0,STACK_FRAME_OVERHEAD-16(r1)
REST_4GPRS(2, r1)
bne- cr1,1f /* emulate stack store */
mtcr r6
REST_GPR(6, r1)
REST_GPR(0, r1)
REST_GPR(1, r1)
RFI_TO_KERNEL
b . /* prevent speculative execution */
1: /*
* Emulate stack store with update. New r1 value was already calculated
* and updated in our interrupt regs by emulate_loadstore, but we can't
* store the previous value of r1 to the stack before re-loading our
* registers from it, otherwise they could be clobbered. Use
* PACA_EXGEN as temporary storage to hold the store data, as
* interrupts are disabled here so it won't be clobbered.
*/
mtcr r6
std r9,PACA_EXGEN+0(r13)
addi r9,r1,INT_FRAME_SIZE /* get original r1 */
REST_GPR(6, r1)
REST_GPR(0, r1)
REST_GPR(1, r1)
std r9,0(r1) /* perform store component of stdu */
ld r9,PACA_EXGEN+0(r13)
RFI_TO_KERNEL
b . /* prevent speculative execution */
#endif /* CONFIG_PPC_BOOK3S */
#ifdef CONFIG_PPC_RTAS
/*
* On CHRP, the Run-Time Abstraction Services (RTAS) have to be
* called with the MMU off.
*
* In addition, we need to be in 32b mode, at least for now.
*
* Note: r3 is an input parameter to rtas, so don't trash it...
*/
_GLOBAL(enter_rtas)
mflr r0
std r0,16(r1)
stdu r1,-SWITCH_FRAME_SIZE(r1) /* Save SP and create stack space. */
/* Because RTAS is running in 32b mode, it clobbers the high order half
* of all registers that it saves. We therefore save those registers
* RTAS might touch to the stack. (r0, r3-r13 are caller saved)
*/
SAVE_GPR(2, r1) /* Save the TOC */
SAVE_GPR(13, r1) /* Save paca */
SAVE_NVGPRS(r1) /* Save the non-volatiles */
mfcr r4
std r4,_CCR(r1)
mfctr r5
std r5,_CTR(r1)
mfspr r6,SPRN_XER
std r6,_XER(r1)
mfdar r7
std r7,_DAR(r1)
mfdsisr r8
std r8,_DSISR(r1)
/* Temporary workaround to clear CR until RTAS can be modified to
* ignore all bits.
*/
li r0,0
mtcr r0
#ifdef CONFIG_BUG
/* There is no way it is acceptable to get here with interrupts enabled,
* check it with the asm equivalent of WARN_ON
*/
lbz r0,PACAIRQSOFTMASK(r13)
1: tdeqi r0,IRQS_ENABLED
EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
#endif
/* Hard-disable interrupts */
mfmsr r6
rldicl r7,r6,48,1
rotldi r7,r7,16
mtmsrd r7,1
/* Unfortunately, the stack pointer and the MSR are also clobbered,
* so they are saved in the PACA which allows us to restore
* our original state after RTAS returns.
*/
std r1,PACAR1(r13)
std r6,PACASAVEDMSR(r13)
/* Setup our real return addr */
LOAD_REG_ADDR(r4,rtas_return_loc)
clrldi r4,r4,2 /* convert to realmode address */
mtlr r4
li r0,0
ori r0,r0,MSR_EE|MSR_SE|MSR_BE|MSR_RI
andc r0,r6,r0
li r9,1
rldicr r9,r9,MSR_SF_LG,(63-MSR_SF_LG)
ori r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP|MSR_RI|MSR_LE
andc r6,r0,r9
__enter_rtas:
sync /* disable interrupts so SRR0/1 */
mtmsrd r0 /* don't get trashed */
LOAD_REG_ADDR(r4, rtas)
ld r5,RTASENTRY(r4) /* get the rtas->entry value */
ld r4,RTASBASE(r4) /* get the rtas->base value */
mtspr SPRN_SRR0,r5
mtspr SPRN_SRR1,r6
RFI_TO_KERNEL
b . /* prevent speculative execution */
rtas_return_loc:
FIXUP_ENDIAN
/*
* Clear RI and set SF before anything.
*/
mfmsr r6
li r0,MSR_RI
andc r6,r6,r0
sldi r0,r0,(MSR_SF_LG - MSR_RI_LG)
or r6,r6,r0
sync
mtmsrd r6
/* relocation is off at this point */
GET_PACA(r4)
clrldi r4,r4,2 /* convert to realmode address */
bcl 20,31,$+4
0: mflr r3
ld r3,(1f-0b)(r3) /* get &rtas_restore_regs */
ld r1,PACAR1(r4) /* Restore our SP */
ld r4,PACASAVEDMSR(r4) /* Restore our MSR */
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
RFI_TO_KERNEL
b . /* prevent speculative execution */
_ASM_NOKPROBE_SYMBOL(__enter_rtas)
_ASM_NOKPROBE_SYMBOL(rtas_return_loc)
.align 3
1: .8byte rtas_restore_regs
rtas_restore_regs:
/* relocation is on at this point */
REST_GPR(2, r1) /* Restore the TOC */
REST_GPR(13, r1) /* Restore paca */
REST_NVGPRS(r1) /* Restore the non-volatiles */
GET_PACA(r13)
ld r4,_CCR(r1)
mtcr r4
ld r5,_CTR(r1)
mtctr r5
ld r6,_XER(r1)
mtspr SPRN_XER,r6
ld r7,_DAR(r1)
mtdar r7
ld r8,_DSISR(r1)
mtdsisr r8
addi r1,r1,SWITCH_FRAME_SIZE /* Unstack our frame */
ld r0,16(r1) /* get return address */
mtlr r0
blr /* return to caller */
#endif /* CONFIG_PPC_RTAS */
_GLOBAL(enter_prom)
mflr r0
std r0,16(r1)
stdu r1,-SWITCH_FRAME_SIZE(r1) /* Save SP and create stack space */
/* Because PROM is running in 32b mode, it clobbers the high order half
* of all registers that it saves. We therefore save those registers
* PROM might touch to the stack. (r0, r3-r13 are caller saved)
*/
SAVE_GPR(2, r1)
SAVE_GPR(13, r1)
SAVE_NVGPRS(r1)
mfcr r10
mfmsr r11
std r10,_CCR(r1)
std r11,_MSR(r1)
/* Put PROM address in SRR0 */
mtsrr0 r4
/* Setup our trampoline return addr in LR */
bcl 20,31,$+4
0: mflr r4
addi r4,r4,(1f - 0b)
mtlr r4
/* Prepare a 32-bit mode big endian MSR
*/
#ifdef CONFIG_PPC_BOOK3E
rlwinm r11,r11,0,1,31
mtsrr1 r11
rfi
#else /* CONFIG_PPC_BOOK3E */
LOAD_REG_IMMEDIATE(r12, MSR_SF | MSR_ISF | MSR_LE)
andc r11,r11,r12
mtsrr1 r11
RFI_TO_KERNEL
#endif /* CONFIG_PPC_BOOK3E */
1: /* Return from OF */
FIXUP_ENDIAN
/* Just make sure that r1 top 32 bits didn't get
* corrupt by OF
*/
rldicl r1,r1,0,32
/* Restore the MSR (back to 64 bits) */
ld r0,_MSR(r1)
MTMSRD(r0)
isync
/* Restore other registers */
REST_GPR(2, r1)
REST_GPR(13, r1)
REST_NVGPRS(r1)
ld r4,_CCR(r1)
mtcr r4
addi r1,r1,SWITCH_FRAME_SIZE
ld r0,16(r1)
mtlr r0
blr
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку