WSL2-Linux-Kernel/arch/mips/pnx8550/common/pci.c

135 строки
3.7 KiB
C

/*
*
* BRIEF MODULE DESCRIPTION
*
* Author: source@mvista.com
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*/
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <pci.h>
#include <glb.h>
#include <nand.h>
static struct resource pci_io_resource = {
.start = PNX8550_PCIIO + 0x1000, /* reserve regacy I/O space */
.end = PNX8550_PCIIO + PNX8550_PCIIO_SIZE,
.name = "pci IO space",
.flags = IORESOURCE_IO
};
static struct resource pci_mem_resource = {
.start = PNX8550_PCIMEM,
.end = PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1,
.name = "pci memory space",
.flags = IORESOURCE_MEM
};
extern struct pci_ops pnx8550_pci_ops;
static struct pci_controller pnx8550_controller = {
.pci_ops = &pnx8550_pci_ops,
.io_map_base = PNX8550_PORT_BASE,
.io_resource = &pci_io_resource,
.mem_resource = &pci_mem_resource,
};
/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
static inline unsigned long get_system_mem_size(void)
{
/* Read IP2031_RANK0_ADDR_LO */
unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
/* Read IP2031_RANK1_ADDR_HI */
unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
return dram_r1_hi - dram_r0_lo + 1;
}
static int __init pnx8550_pci_setup(void)
{
int pci_mem_code;
int mem_size = get_system_mem_size() >> 20;
/* Clear the Global 2 Register, PCI Inta Output Enable Registers
Bit 1:Enable DAC Powerdown
-> 0:DACs are enabled and are working normally
1:DACs are powerdown
Bit 0:Enable of PCI inta output
-> 0 = Disable PCI inta output
1 = Enable PCI inta output
*/
PNX8550_GLB2_ENAB_INTA_O = 0;
/* Calc the PCI mem size code */
if (mem_size >= 128)
pci_mem_code = SIZE_128M;
else if (mem_size >= 64)
pci_mem_code = SIZE_64M;
else if (mem_size >= 32)
pci_mem_code = SIZE_32M;
else
pci_mem_code = SIZE_16M;
/* Set PCI_XIO registers */
outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO);
outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI);
outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO);
outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI);
/* Send memory transaction via PCI_BASE2 */
outl(0x00000001, PCI_BASE | PCI_IO);
/* Unlock the setup register */
outl(0xca, PCI_BASE | PCI_UNLOCKREG);
/*
* BAR0 of PNX8550 (pci base 10) must be zero in order for ide
* to work, and in order for bus_to_baddr to work without any
* hacks.
*/
outl(0x00000000, PCI_BASE | PCI_BASE10);
/*
*These two bars are set by default or the boot code.
* However, it's safer to set them here so we're not boot
* code dependent.
*/
outl(0x1be00000, PCI_BASE | PCI_BASE14); /* PNX MMIO */
outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18); /* XIO */
outl(PCI_EN_TA |
PCI_EN_PCI2MMI |
PCI_EN_XIO |
PCI_SETUP_BASE18_SIZE(SIZE_32M) |
PCI_SETUP_BASE18_EN |
PCI_SETUP_BASE14_EN |
PCI_SETUP_BASE10_PREF |
PCI_SETUP_BASE10_SIZE(pci_mem_code) |
PCI_SETUP_CFGMANAGE_EN |
PCI_SETUP_PCIARB_EN,
PCI_BASE |
PCI_SETUP); /* PCI_SETUP */
outl(0x00000000, PCI_BASE | PCI_CTRL); /* PCI_CONTROL */
register_pci_controller(&pnx8550_controller);
return 0;
}
arch_initcall(pnx8550_pci_setup);