471 строка
11 KiB
C
471 строка
11 KiB
C
/*
|
|
* Copyright 2011, Netlogic Microsystems Inc.
|
|
* Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/io.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/wait.h>
|
|
|
|
/* XLR I2C REGISTERS */
|
|
#define XLR_I2C_CFG 0x00
|
|
#define XLR_I2C_CLKDIV 0x01
|
|
#define XLR_I2C_DEVADDR 0x02
|
|
#define XLR_I2C_ADDR 0x03
|
|
#define XLR_I2C_DATAOUT 0x04
|
|
#define XLR_I2C_DATAIN 0x05
|
|
#define XLR_I2C_STATUS 0x06
|
|
#define XLR_I2C_STARTXFR 0x07
|
|
#define XLR_I2C_BYTECNT 0x08
|
|
#define XLR_I2C_HDSTATIM 0x09
|
|
|
|
/* Sigma Designs additional registers */
|
|
#define XLR_I2C_INT_EN 0x09
|
|
#define XLR_I2C_INT_STAT 0x0a
|
|
|
|
/* XLR I2C REGISTERS FLAGS */
|
|
#define XLR_I2C_BUS_BUSY 0x01
|
|
#define XLR_I2C_SDOEMPTY 0x02
|
|
#define XLR_I2C_RXRDY 0x04
|
|
#define XLR_I2C_ACK_ERR 0x08
|
|
#define XLR_I2C_ARB_STARTERR 0x30
|
|
|
|
/* Register Values */
|
|
#define XLR_I2C_CFG_ADDR 0xF8
|
|
#define XLR_I2C_CFG_NOADDR 0xFA
|
|
#define XLR_I2C_STARTXFR_ND 0x02 /* No Data */
|
|
#define XLR_I2C_STARTXFR_RD 0x01 /* Read */
|
|
#define XLR_I2C_STARTXFR_WR 0x00 /* Write */
|
|
|
|
#define XLR_I2C_TIMEOUT 10 /* timeout per byte in msec */
|
|
|
|
/*
|
|
* On XLR/XLS, we need to use __raw_ IO to read the I2C registers
|
|
* because they are in the big-endian MMIO area on the SoC.
|
|
*
|
|
* The readl/writel implementation on XLR/XLS byteswaps, because
|
|
* those are for its little-endian PCI space (see arch/mips/Kconfig).
|
|
*/
|
|
static inline void xlr_i2c_wreg(u32 __iomem *base, unsigned int reg, u32 val)
|
|
{
|
|
__raw_writel(val, base + reg);
|
|
}
|
|
|
|
static inline u32 xlr_i2c_rdreg(u32 __iomem *base, unsigned int reg)
|
|
{
|
|
return __raw_readl(base + reg);
|
|
}
|
|
|
|
#define XLR_I2C_FLAG_IRQ 1
|
|
|
|
struct xlr_i2c_config {
|
|
u32 flags; /* optional feature support */
|
|
u32 status_busy; /* value of STATUS[0] when busy */
|
|
u32 cfg_extra; /* extra CFG bits to set */
|
|
};
|
|
|
|
struct xlr_i2c_private {
|
|
struct i2c_adapter adap;
|
|
u32 __iomem *iobase;
|
|
int irq;
|
|
int pos;
|
|
struct i2c_msg *msg;
|
|
const struct xlr_i2c_config *cfg;
|
|
wait_queue_head_t wait;
|
|
struct clk *clk;
|
|
};
|
|
|
|
static int xlr_i2c_busy(struct xlr_i2c_private *priv, u32 status)
|
|
{
|
|
return (status & XLR_I2C_BUS_BUSY) == priv->cfg->status_busy;
|
|
}
|
|
|
|
static int xlr_i2c_idle(struct xlr_i2c_private *priv)
|
|
{
|
|
return !xlr_i2c_busy(priv, xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS));
|
|
}
|
|
|
|
static int xlr_i2c_wait(struct xlr_i2c_private *priv, unsigned long timeout)
|
|
{
|
|
int status;
|
|
int t;
|
|
|
|
t = wait_event_timeout(priv->wait, xlr_i2c_idle(priv),
|
|
msecs_to_jiffies(timeout));
|
|
if (!t)
|
|
return -ETIMEDOUT;
|
|
|
|
status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS);
|
|
|
|
return status & XLR_I2C_ACK_ERR ? -EIO : 0;
|
|
}
|
|
|
|
static void xlr_i2c_tx_irq(struct xlr_i2c_private *priv, u32 status)
|
|
{
|
|
struct i2c_msg *msg = priv->msg;
|
|
|
|
if (status & XLR_I2C_SDOEMPTY)
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT,
|
|
msg->buf[priv->pos++]);
|
|
}
|
|
|
|
static void xlr_i2c_rx_irq(struct xlr_i2c_private *priv, u32 status)
|
|
{
|
|
struct i2c_msg *msg = priv->msg;
|
|
|
|
if (status & XLR_I2C_RXRDY)
|
|
msg->buf[priv->pos++] =
|
|
xlr_i2c_rdreg(priv->iobase, XLR_I2C_DATAIN);
|
|
}
|
|
|
|
static irqreturn_t xlr_i2c_irq(int irq, void *dev_id)
|
|
{
|
|
struct xlr_i2c_private *priv = dev_id;
|
|
struct i2c_msg *msg = priv->msg;
|
|
u32 int_stat, status;
|
|
|
|
int_stat = xlr_i2c_rdreg(priv->iobase, XLR_I2C_INT_STAT);
|
|
if (!int_stat)
|
|
return IRQ_NONE;
|
|
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_STAT, int_stat);
|
|
|
|
if (!msg)
|
|
return IRQ_HANDLED;
|
|
|
|
status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS);
|
|
|
|
if (priv->pos < msg->len) {
|
|
if (msg->flags & I2C_M_RD)
|
|
xlr_i2c_rx_irq(priv, status);
|
|
else
|
|
xlr_i2c_tx_irq(priv, status);
|
|
}
|
|
|
|
if (!xlr_i2c_busy(priv, status))
|
|
wake_up(&priv->wait);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int xlr_i2c_tx(struct xlr_i2c_private *priv, u16 len,
|
|
u8 *buf, u16 addr)
|
|
{
|
|
struct i2c_adapter *adap = &priv->adap;
|
|
unsigned long timeout, stoptime, checktime;
|
|
u32 i2c_status;
|
|
int pos, timedout;
|
|
u8 offset;
|
|
u32 xfer;
|
|
|
|
if (!len)
|
|
return -EOPNOTSUPP;
|
|
|
|
offset = buf[0];
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_ADDR, offset);
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr);
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG,
|
|
XLR_I2C_CFG_ADDR | priv->cfg->cfg_extra);
|
|
|
|
timeout = msecs_to_jiffies(XLR_I2C_TIMEOUT);
|
|
stoptime = jiffies + timeout;
|
|
timedout = 0;
|
|
|
|
if (len == 1) {
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 1);
|
|
xfer = XLR_I2C_STARTXFR_ND;
|
|
pos = 1;
|
|
} else {
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 2);
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, buf[1]);
|
|
xfer = XLR_I2C_STARTXFR_WR;
|
|
pos = 2;
|
|
}
|
|
|
|
priv->pos = pos;
|
|
|
|
retry:
|
|
/* retry can only happen on the first byte */
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, xfer);
|
|
|
|
if (priv->irq > 0)
|
|
return xlr_i2c_wait(priv, XLR_I2C_TIMEOUT * len);
|
|
|
|
while (!timedout) {
|
|
checktime = jiffies;
|
|
i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS);
|
|
|
|
if ((i2c_status & XLR_I2C_SDOEMPTY) && pos < len) {
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, buf[pos++]);
|
|
|
|
/* reset timeout on successful xmit */
|
|
stoptime = jiffies + timeout;
|
|
}
|
|
timedout = time_after(checktime, stoptime);
|
|
|
|
if (i2c_status & XLR_I2C_ARB_STARTERR) {
|
|
if (timedout)
|
|
break;
|
|
goto retry;
|
|
}
|
|
|
|
if (i2c_status & XLR_I2C_ACK_ERR)
|
|
return -EIO;
|
|
|
|
if (!xlr_i2c_busy(priv, i2c_status) && pos >= len)
|
|
return 0;
|
|
}
|
|
dev_err(&adap->dev, "I2C transmit timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int xlr_i2c_rx(struct xlr_i2c_private *priv, u16 len, u8 *buf, u16 addr)
|
|
{
|
|
struct i2c_adapter *adap = &priv->adap;
|
|
u32 i2c_status;
|
|
unsigned long timeout, stoptime, checktime;
|
|
int nbytes, timedout;
|
|
|
|
if (!len)
|
|
return -EOPNOTSUPP;
|
|
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG,
|
|
XLR_I2C_CFG_NOADDR | priv->cfg->cfg_extra);
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 1);
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr);
|
|
|
|
priv->pos = 0;
|
|
|
|
timeout = msecs_to_jiffies(XLR_I2C_TIMEOUT);
|
|
stoptime = jiffies + timeout;
|
|
timedout = 0;
|
|
nbytes = 0;
|
|
retry:
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, XLR_I2C_STARTXFR_RD);
|
|
|
|
if (priv->irq > 0)
|
|
return xlr_i2c_wait(priv, XLR_I2C_TIMEOUT * len);
|
|
|
|
while (!timedout) {
|
|
checktime = jiffies;
|
|
i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS);
|
|
if (i2c_status & XLR_I2C_RXRDY) {
|
|
if (nbytes >= len)
|
|
return -EIO; /* should not happen */
|
|
|
|
buf[nbytes++] =
|
|
xlr_i2c_rdreg(priv->iobase, XLR_I2C_DATAIN);
|
|
|
|
/* reset timeout on successful read */
|
|
stoptime = jiffies + timeout;
|
|
}
|
|
|
|
timedout = time_after(checktime, stoptime);
|
|
if (i2c_status & XLR_I2C_ARB_STARTERR) {
|
|
if (timedout)
|
|
break;
|
|
goto retry;
|
|
}
|
|
|
|
if (i2c_status & XLR_I2C_ACK_ERR)
|
|
return -EIO;
|
|
|
|
if (!xlr_i2c_busy(priv, i2c_status))
|
|
return 0;
|
|
}
|
|
|
|
dev_err(&adap->dev, "I2C receive timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int xlr_i2c_xfer(struct i2c_adapter *adap,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
struct i2c_msg *msg;
|
|
int i;
|
|
int ret = 0;
|
|
struct xlr_i2c_private *priv = i2c_get_adapdata(adap);
|
|
|
|
ret = clk_enable(priv->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (priv->irq)
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_EN, 0xf);
|
|
|
|
|
|
for (i = 0; ret == 0 && i < num; i++) {
|
|
msg = &msgs[i];
|
|
priv->msg = msg;
|
|
if (msg->flags & I2C_M_RD)
|
|
ret = xlr_i2c_rx(priv, msg->len, &msg->buf[0],
|
|
msg->addr);
|
|
else
|
|
ret = xlr_i2c_tx(priv, msg->len, &msg->buf[0],
|
|
msg->addr);
|
|
}
|
|
|
|
if (priv->irq)
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_EN, 0);
|
|
|
|
clk_disable(priv->clk);
|
|
priv->msg = NULL;
|
|
|
|
return (ret != 0) ? ret : num;
|
|
}
|
|
|
|
static u32 xlr_func(struct i2c_adapter *adap)
|
|
{
|
|
/* Emulate SMBUS over I2C */
|
|
return (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) | I2C_FUNC_I2C;
|
|
}
|
|
|
|
static struct i2c_algorithm xlr_i2c_algo = {
|
|
.master_xfer = xlr_i2c_xfer,
|
|
.functionality = xlr_func,
|
|
};
|
|
|
|
static const struct xlr_i2c_config xlr_i2c_config_default = {
|
|
.status_busy = XLR_I2C_BUS_BUSY,
|
|
.cfg_extra = 0,
|
|
};
|
|
|
|
static const struct xlr_i2c_config xlr_i2c_config_tangox = {
|
|
.flags = XLR_I2C_FLAG_IRQ,
|
|
.status_busy = 0,
|
|
.cfg_extra = 1 << 8,
|
|
};
|
|
|
|
static const struct of_device_id xlr_i2c_dt_ids[] = {
|
|
{
|
|
.compatible = "sigma,smp8642-i2c",
|
|
.data = &xlr_i2c_config_tangox,
|
|
},
|
|
{ }
|
|
};
|
|
|
|
static int xlr_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *match;
|
|
struct xlr_i2c_private *priv;
|
|
struct resource *res;
|
|
struct clk *clk;
|
|
unsigned long clk_rate;
|
|
unsigned long clk_div;
|
|
u32 busfreq;
|
|
int irq;
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
match = of_match_device(xlr_i2c_dt_ids, &pdev->dev);
|
|
if (match)
|
|
priv->cfg = match->data;
|
|
else
|
|
priv->cfg = &xlr_i2c_config_default;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
priv->iobase = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(priv->iobase))
|
|
return PTR_ERR(priv->iobase);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
|
|
if (irq > 0 && (priv->cfg->flags & XLR_I2C_FLAG_IRQ)) {
|
|
priv->irq = irq;
|
|
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_EN, 0);
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_STAT, 0xf);
|
|
|
|
ret = devm_request_irq(&pdev->dev, priv->irq, xlr_i2c_irq,
|
|
IRQF_SHARED, dev_name(&pdev->dev),
|
|
priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
init_waitqueue_head(&priv->wait);
|
|
}
|
|
|
|
if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
|
|
&busfreq))
|
|
busfreq = 100000;
|
|
|
|
clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (!IS_ERR(clk)) {
|
|
ret = clk_prepare_enable(clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
clk_rate = clk_get_rate(clk);
|
|
clk_div = DIV_ROUND_UP(clk_rate, 2 * busfreq);
|
|
xlr_i2c_wreg(priv->iobase, XLR_I2C_CLKDIV, clk_div);
|
|
|
|
clk_disable(clk);
|
|
priv->clk = clk;
|
|
}
|
|
|
|
priv->adap.dev.parent = &pdev->dev;
|
|
priv->adap.dev.of_node = pdev->dev.of_node;
|
|
priv->adap.owner = THIS_MODULE;
|
|
priv->adap.algo_data = priv;
|
|
priv->adap.algo = &xlr_i2c_algo;
|
|
priv->adap.nr = pdev->id;
|
|
priv->adap.class = I2C_CLASS_HWMON;
|
|
snprintf(priv->adap.name, sizeof(priv->adap.name), "xlr-i2c");
|
|
|
|
i2c_set_adapdata(&priv->adap, priv);
|
|
ret = i2c_add_numbered_adapter(&priv->adap);
|
|
if (ret < 0) {
|
|
dev_err(&priv->adap.dev, "Failed to add i2c bus.\n");
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
dev_info(&priv->adap.dev, "Added I2C Bus.\n");
|
|
return 0;
|
|
}
|
|
|
|
static int xlr_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct xlr_i2c_private *priv;
|
|
|
|
priv = platform_get_drvdata(pdev);
|
|
i2c_del_adapter(&priv->adap);
|
|
clk_unprepare(priv->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver xlr_i2c_driver = {
|
|
.probe = xlr_i2c_probe,
|
|
.remove = xlr_i2c_remove,
|
|
.driver = {
|
|
.name = "xlr-i2cbus",
|
|
.of_match_table = xlr_i2c_dt_ids,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(xlr_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@netlogicmicro.com>");
|
|
MODULE_DESCRIPTION("XLR/XLS SoC I2C Controller driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:xlr-i2cbus");
|