WSL2-Linux-Kernel/net/mac80211/main.c

1571 строка
44 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright (C) 2017 Intel Deutschland GmbH
* Copyright (C) 2018-2022 Intel Corporation
*/
#include <net/mac80211.h>
#include <linux/module.h>
#include <linux/fips.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <linux/rtnetlink.h>
#include <linux/bitmap.h>
#include <linux/inetdevice.h>
#include <net/net_namespace.h>
#include <net/cfg80211.h>
#include <net/addrconf.h>
#include "ieee80211_i.h"
#include "driver-ops.h"
#include "rate.h"
#include "mesh.h"
#include "wep.h"
#include "led.h"
#include "debugfs.h"
void ieee80211_configure_filter(struct ieee80211_local *local)
{
u64 mc;
unsigned int changed_flags;
unsigned int new_flags = 0;
if (atomic_read(&local->iff_allmultis))
new_flags |= FIF_ALLMULTI;
if (local->monitors || test_bit(SCAN_SW_SCANNING, &local->scanning) ||
test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning))
new_flags |= FIF_BCN_PRBRESP_PROMISC;
if (local->fif_probe_req || local->probe_req_reg)
new_flags |= FIF_PROBE_REQ;
if (local->fif_fcsfail)
new_flags |= FIF_FCSFAIL;
if (local->fif_plcpfail)
new_flags |= FIF_PLCPFAIL;
if (local->fif_control)
new_flags |= FIF_CONTROL;
if (local->fif_other_bss)
new_flags |= FIF_OTHER_BSS;
if (local->fif_pspoll)
new_flags |= FIF_PSPOLL;
if (local->rx_mcast_action_reg)
new_flags |= FIF_MCAST_ACTION;
spin_lock_bh(&local->filter_lock);
changed_flags = local->filter_flags ^ new_flags;
mc = drv_prepare_multicast(local, &local->mc_list);
spin_unlock_bh(&local->filter_lock);
/* be a bit nasty */
new_flags |= (1<<31);
drv_configure_filter(local, changed_flags, &new_flags, mc);
WARN_ON(new_flags & (1<<31));
local->filter_flags = new_flags & ~(1<<31);
}
static void ieee80211_reconfig_filter(struct work_struct *work)
{
struct ieee80211_local *local =
container_of(work, struct ieee80211_local, reconfig_filter);
ieee80211_configure_filter(local);
}
static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
struct cfg80211_chan_def chandef = {};
u32 changed = 0;
int power;
u32 offchannel_flag;
offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
if (local->scan_chandef.chan) {
chandef = local->scan_chandef;
} else if (local->tmp_channel) {
chandef.chan = local->tmp_channel;
chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
chandef.center_freq1 = chandef.chan->center_freq;
chandef.freq1_offset = chandef.chan->freq_offset;
} else
chandef = local->_oper_chandef;
WARN(!cfg80211_chandef_valid(&chandef),
"control:%d.%03d MHz width:%d center: %d.%03d/%d MHz",
chandef.chan->center_freq, chandef.chan->freq_offset,
chandef.width, chandef.center_freq1, chandef.freq1_offset,
chandef.center_freq2);
if (!cfg80211_chandef_identical(&chandef, &local->_oper_chandef))
local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
else
local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL;
offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
if (offchannel_flag ||
!cfg80211_chandef_identical(&local->hw.conf.chandef,
&local->_oper_chandef)) {
local->hw.conf.chandef = chandef;
changed |= IEEE80211_CONF_CHANGE_CHANNEL;
}
if (!conf_is_ht(&local->hw.conf)) {
/*
* mac80211.h documents that this is only valid
* when the channel is set to an HT type, and
* that otherwise STATIC is used.
*/
local->hw.conf.smps_mode = IEEE80211_SMPS_STATIC;
} else if (local->hw.conf.smps_mode != local->smps_mode) {
local->hw.conf.smps_mode = local->smps_mode;
changed |= IEEE80211_CONF_CHANGE_SMPS;
}
power = ieee80211_chandef_max_power(&chandef);
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
if (!rcu_access_pointer(sdata->vif.bss_conf.chanctx_conf))
continue;
if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
continue;
if (sdata->vif.bss_conf.txpower == INT_MIN)
continue;
power = min(power, sdata->vif.bss_conf.txpower);
}
rcu_read_unlock();
if (local->hw.conf.power_level != power) {
changed |= IEEE80211_CONF_CHANGE_POWER;
local->hw.conf.power_level = power;
}
return changed;
}
int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
{
int ret = 0;
might_sleep();
if (!local->use_chanctx)
changed |= ieee80211_hw_conf_chan(local);
else
changed &= ~(IEEE80211_CONF_CHANGE_CHANNEL |
IEEE80211_CONF_CHANGE_POWER |
IEEE80211_CONF_CHANGE_SMPS);
if (changed && local->open_count) {
ret = drv_config(local, changed);
/*
* Goal:
* HW reconfiguration should never fail, the driver has told
* us what it can support so it should live up to that promise.
*
* Current status:
* rfkill is not integrated with mac80211 and a
* configuration command can thus fail if hardware rfkill
* is enabled
*
* FIXME: integrate rfkill with mac80211 and then add this
* WARN_ON() back
*
*/
/* WARN_ON(ret); */
}
return ret;
}
#define BSS_CHANGED_VIF_CFG_FLAGS (BSS_CHANGED_ASSOC |\
BSS_CHANGED_IDLE |\
BSS_CHANGED_PS |\
BSS_CHANGED_IBSS |\
BSS_CHANGED_ARP_FILTER |\
BSS_CHANGED_SSID)
void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
u64 changed)
{
struct ieee80211_local *local = sdata->local;
might_sleep();
if (!changed || sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
return;
if (WARN_ON_ONCE(changed & (BSS_CHANGED_BEACON |
BSS_CHANGED_BEACON_ENABLED) &&
sdata->vif.type != NL80211_IFTYPE_AP &&
sdata->vif.type != NL80211_IFTYPE_ADHOC &&
sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
sdata->vif.type != NL80211_IFTYPE_OCB))
return;
if (WARN_ON_ONCE(sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE ||
sdata->vif.type == NL80211_IFTYPE_NAN ||
(sdata->vif.type == NL80211_IFTYPE_MONITOR &&
!sdata->vif.bss_conf.mu_mimo_owner &&
!(changed & BSS_CHANGED_TXPOWER))))
return;
if (!check_sdata_in_driver(sdata))
return;
if (changed & BSS_CHANGED_VIF_CFG_FLAGS) {
u64 ch = changed & BSS_CHANGED_VIF_CFG_FLAGS;
trace_drv_vif_cfg_changed(local, sdata, changed);
if (local->ops->vif_cfg_changed)
local->ops->vif_cfg_changed(&local->hw, &sdata->vif, ch);
}
if (changed & ~BSS_CHANGED_VIF_CFG_FLAGS) {
u64 ch = changed & ~BSS_CHANGED_VIF_CFG_FLAGS;
/* FIXME: should be for each link */
trace_drv_link_info_changed(local, sdata, &sdata->vif.bss_conf,
changed);
if (local->ops->link_info_changed)
local->ops->link_info_changed(&local->hw, &sdata->vif,
&sdata->vif.bss_conf, ch);
}
if (local->ops->bss_info_changed)
local->ops->bss_info_changed(&local->hw, &sdata->vif,
&sdata->vif.bss_conf, changed);
trace_drv_return_void(local);
}
void ieee80211_vif_cfg_change_notify(struct ieee80211_sub_if_data *sdata,
u64 changed)
{
struct ieee80211_local *local = sdata->local;
WARN_ON_ONCE(changed & ~BSS_CHANGED_VIF_CFG_FLAGS);
if (!changed || sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
return;
drv_vif_cfg_changed(local, sdata, changed);
}
void ieee80211_link_info_change_notify(struct ieee80211_sub_if_data *sdata,
struct ieee80211_link_data *link,
u64 changed)
{
struct ieee80211_local *local = sdata->local;
WARN_ON_ONCE(changed & BSS_CHANGED_VIF_CFG_FLAGS);
if (!changed || sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
return;
if (!check_sdata_in_driver(sdata))
return;
drv_link_info_changed(local, sdata, link->conf, link->link_id, changed);
}
u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
{
sdata->vif.bss_conf.use_cts_prot = false;
sdata->vif.bss_conf.use_short_preamble = false;
sdata->vif.bss_conf.use_short_slot = false;
return BSS_CHANGED_ERP_CTS_PROT |
BSS_CHANGED_ERP_PREAMBLE |
BSS_CHANGED_ERP_SLOT;
}
static void ieee80211_tasklet_handler(struct tasklet_struct *t)
{
struct ieee80211_local *local = from_tasklet(local, t, tasklet);
struct sk_buff *skb;
while ((skb = skb_dequeue(&local->skb_queue)) ||
(skb = skb_dequeue(&local->skb_queue_unreliable))) {
switch (skb->pkt_type) {
case IEEE80211_RX_MSG:
/* Clear skb->pkt_type in order to not confuse kernel
* netstack. */
skb->pkt_type = 0;
ieee80211_rx(&local->hw, skb);
break;
case IEEE80211_TX_STATUS_MSG:
skb->pkt_type = 0;
ieee80211_tx_status(&local->hw, skb);
break;
default:
WARN(1, "mac80211: Packet is of unknown type %d\n",
skb->pkt_type);
dev_kfree_skb(skb);
break;
}
}
}
static void ieee80211_restart_work(struct work_struct *work)
{
struct ieee80211_local *local =
container_of(work, struct ieee80211_local, restart_work);
struct ieee80211_sub_if_data *sdata;
int ret;
/* wait for scan work complete */
flush_workqueue(local->workqueue);
flush_work(&local->sched_scan_stopped_work);
flush_work(&local->radar_detected_work);
rtnl_lock();
/* we might do interface manipulations, so need both */
wiphy_lock(local->hw.wiphy);
WARN(test_bit(SCAN_HW_SCANNING, &local->scanning),
"%s called with hardware scan in progress\n", __func__);
list_for_each_entry(sdata, &local->interfaces, list) {
/*
* XXX: there may be more work for other vif types and even
* for station mode: a good thing would be to run most of
* the iface type's dependent _stop (ieee80211_mg_stop,
* ieee80211_ibss_stop) etc...
* For now, fix only the specific bug that was seen: race
* between csa_connection_drop_work and us.
*/
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
/*
* This worker is scheduled from the iface worker that
* runs on mac80211's workqueue, so we can't be
* scheduling this worker after the cancel right here.
* The exception is ieee80211_chswitch_done.
* Then we can have a race...
*/
cancel_work_sync(&sdata->u.mgd.csa_connection_drop_work);
if (sdata->vif.bss_conf.csa_active) {
sdata_lock(sdata);
ieee80211_sta_connection_lost(sdata,
WLAN_REASON_UNSPECIFIED,
false);
sdata_unlock(sdata);
}
}
flush_delayed_work(&sdata->dec_tailroom_needed_wk);
}
ieee80211_scan_cancel(local);
/* make sure any new ROC will consider local->in_reconfig */
flush_delayed_work(&local->roc_work);
flush_work(&local->hw_roc_done);
/* wait for all packet processing to be done */
synchronize_net();
ret = ieee80211_reconfig(local);
wiphy_unlock(local->hw.wiphy);
if (ret)
cfg80211_shutdown_all_interfaces(local->hw.wiphy);
rtnl_unlock();
}
void ieee80211_restart_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
trace_api_restart_hw(local);
wiphy_info(hw->wiphy,
"Hardware restart was requested\n");
/* use this reason, ieee80211_reconfig will unblock it */
ieee80211_stop_queues_by_reason(hw, IEEE80211_MAX_QUEUE_MAP,
IEEE80211_QUEUE_STOP_REASON_SUSPEND,
false);
/*
* Stop all Rx during the reconfig. We don't want state changes
* or driver callbacks while this is in progress.
*/
local->in_reconfig = true;
barrier();
queue_work(system_freezable_wq, &local->restart_work);
}
EXPORT_SYMBOL(ieee80211_restart_hw);
#ifdef CONFIG_INET
static int ieee80211_ifa_changed(struct notifier_block *nb,
unsigned long data, void *arg)
{
struct in_ifaddr *ifa = arg;
struct ieee80211_local *local =
container_of(nb, struct ieee80211_local,
ifa_notifier);
struct net_device *ndev = ifa->ifa_dev->dev;
struct wireless_dev *wdev = ndev->ieee80211_ptr;
struct in_device *idev;
struct ieee80211_sub_if_data *sdata;
struct ieee80211_vif_cfg *vif_cfg;
struct ieee80211_if_managed *ifmgd;
int c = 0;
/* Make sure it's our interface that got changed */
if (!wdev)
return NOTIFY_DONE;
if (wdev->wiphy != local->hw.wiphy)
return NOTIFY_DONE;
sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
vif_cfg = &sdata->vif.cfg;
/* ARP filtering is only supported in managed mode */
if (sdata->vif.type != NL80211_IFTYPE_STATION)
return NOTIFY_DONE;
idev = __in_dev_get_rtnl(sdata->dev);
if (!idev)
return NOTIFY_DONE;
ifmgd = &sdata->u.mgd;
sdata_lock(sdata);
/* Copy the addresses to the vif config list */
ifa = rtnl_dereference(idev->ifa_list);
while (ifa) {
if (c < IEEE80211_BSS_ARP_ADDR_LIST_LEN)
vif_cfg->arp_addr_list[c] = ifa->ifa_address;
ifa = rtnl_dereference(ifa->ifa_next);
c++;
}
vif_cfg->arp_addr_cnt = c;
/* Configure driver only if associated (which also implies it is up) */
if (ifmgd->associated)
ieee80211_vif_cfg_change_notify(sdata, BSS_CHANGED_ARP_FILTER);
sdata_unlock(sdata);
return NOTIFY_OK;
}
#endif
#if IS_ENABLED(CONFIG_IPV6)
static int ieee80211_ifa6_changed(struct notifier_block *nb,
unsigned long data, void *arg)
{
struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)arg;
struct inet6_dev *idev = ifa->idev;
struct net_device *ndev = ifa->idev->dev;
struct ieee80211_local *local =
container_of(nb, struct ieee80211_local, ifa6_notifier);
struct wireless_dev *wdev = ndev->ieee80211_ptr;
struct ieee80211_sub_if_data *sdata;
/* Make sure it's our interface that got changed */
if (!wdev || wdev->wiphy != local->hw.wiphy)
return NOTIFY_DONE;
sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
/*
* For now only support station mode. This is mostly because
* doing AP would have to handle AP_VLAN in some way ...
*/
if (sdata->vif.type != NL80211_IFTYPE_STATION)
return NOTIFY_DONE;
drv_ipv6_addr_change(local, sdata, idev);
return NOTIFY_OK;
}
#endif
/* There isn't a lot of sense in it, but you can transmit anything you like */
static const struct ieee80211_txrx_stypes
ieee80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = {
[NL80211_IFTYPE_ADHOC] = {
.tx = 0xffff,
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
BIT(IEEE80211_STYPE_AUTH >> 4) |
BIT(IEEE80211_STYPE_DEAUTH >> 4) |
BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
},
[NL80211_IFTYPE_STATION] = {
.tx = 0xffff,
/*
* To support Pre Association Security Negotiation (PASN) while
* already associated to one AP, allow user space to register to
* Rx authentication frames, so that the user space logic would
* be able to receive/handle authentication frames from a
* different AP as part of PASN.
* It is expected that user space would intelligently register
* for Rx authentication frames, i.e., only when PASN is used
* and configure a match filter only for PASN authentication
* algorithm, as otherwise the MLME functionality of mac80211
* would be broken.
*/
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
BIT(IEEE80211_STYPE_AUTH >> 4) |
BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
},
[NL80211_IFTYPE_AP] = {
.tx = 0xffff,
.rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
BIT(IEEE80211_STYPE_DISASSOC >> 4) |
BIT(IEEE80211_STYPE_AUTH >> 4) |
BIT(IEEE80211_STYPE_DEAUTH >> 4) |
BIT(IEEE80211_STYPE_ACTION >> 4),
},
[NL80211_IFTYPE_AP_VLAN] = {
/* copy AP */
.tx = 0xffff,
.rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
BIT(IEEE80211_STYPE_DISASSOC >> 4) |
BIT(IEEE80211_STYPE_AUTH >> 4) |
BIT(IEEE80211_STYPE_DEAUTH >> 4) |
BIT(IEEE80211_STYPE_ACTION >> 4),
},
[NL80211_IFTYPE_P2P_CLIENT] = {
.tx = 0xffff,
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
},
[NL80211_IFTYPE_P2P_GO] = {
.tx = 0xffff,
.rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
BIT(IEEE80211_STYPE_DISASSOC >> 4) |
BIT(IEEE80211_STYPE_AUTH >> 4) |
BIT(IEEE80211_STYPE_DEAUTH >> 4) |
BIT(IEEE80211_STYPE_ACTION >> 4),
},
[NL80211_IFTYPE_MESH_POINT] = {
.tx = 0xffff,
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
BIT(IEEE80211_STYPE_AUTH >> 4) |
BIT(IEEE80211_STYPE_DEAUTH >> 4),
},
[NL80211_IFTYPE_P2P_DEVICE] = {
.tx = 0xffff,
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
},
};
static const struct ieee80211_ht_cap mac80211_ht_capa_mod_mask = {
.ampdu_params_info = IEEE80211_HT_AMPDU_PARM_FACTOR |
IEEE80211_HT_AMPDU_PARM_DENSITY,
.cap_info = cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
IEEE80211_HT_CAP_MAX_AMSDU |
IEEE80211_HT_CAP_SGI_20 |
IEEE80211_HT_CAP_SGI_40 |
IEEE80211_HT_CAP_TX_STBC |
IEEE80211_HT_CAP_RX_STBC |
IEEE80211_HT_CAP_LDPC_CODING |
IEEE80211_HT_CAP_40MHZ_INTOLERANT),
.mcs = {
.rx_mask = { 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, },
},
};
static const struct ieee80211_vht_cap mac80211_vht_capa_mod_mask = {
.vht_cap_info =
cpu_to_le32(IEEE80211_VHT_CAP_RXLDPC |
IEEE80211_VHT_CAP_SHORT_GI_80 |
IEEE80211_VHT_CAP_SHORT_GI_160 |
IEEE80211_VHT_CAP_RXSTBC_MASK |
IEEE80211_VHT_CAP_TXSTBC |
IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN |
IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN |
IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK),
.supp_mcs = {
.rx_mcs_map = cpu_to_le16(~0),
.tx_mcs_map = cpu_to_le16(~0),
},
};
struct ieee80211_hw *ieee80211_alloc_hw_nm(size_t priv_data_len,
const struct ieee80211_ops *ops,
const char *requested_name)
{
struct ieee80211_local *local;
int priv_size, i;
struct wiphy *wiphy;
bool use_chanctx;
if (WARN_ON(!ops->tx || !ops->start || !ops->stop || !ops->config ||
!ops->add_interface || !ops->remove_interface ||
!ops->configure_filter))
return NULL;
if (WARN_ON(ops->sta_state && (ops->sta_add || ops->sta_remove)))
return NULL;
if (WARN_ON(!!ops->link_info_changed != !!ops->vif_cfg_changed ||
(ops->link_info_changed && ops->bss_info_changed)))
return NULL;
/* check all or no channel context operations exist */
i = !!ops->add_chanctx + !!ops->remove_chanctx +
!!ops->change_chanctx + !!ops->assign_vif_chanctx +
!!ops->unassign_vif_chanctx;
if (WARN_ON(i != 0 && i != 5))
return NULL;
use_chanctx = i == 5;
/* Ensure 32-byte alignment of our private data and hw private data.
* We use the wiphy priv data for both our ieee80211_local and for
* the driver's private data
*
* In memory it'll be like this:
*
* +-------------------------+
* | struct wiphy |
* +-------------------------+
* | struct ieee80211_local |
* +-------------------------+
* | driver's private data |
* +-------------------------+
*
*/
priv_size = ALIGN(sizeof(*local), NETDEV_ALIGN) + priv_data_len;
wiphy = wiphy_new_nm(&mac80211_config_ops, priv_size, requested_name);
if (!wiphy)
return NULL;
wiphy->mgmt_stypes = ieee80211_default_mgmt_stypes;
wiphy->privid = mac80211_wiphy_privid;
wiphy->flags |= WIPHY_FLAG_NETNS_OK |
WIPHY_FLAG_4ADDR_AP |
WIPHY_FLAG_4ADDR_STATION |
WIPHY_FLAG_REPORTS_OBSS |
WIPHY_FLAG_OFFCHAN_TX;
if (!use_chanctx || ops->remain_on_channel)
wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
wiphy->features |= NL80211_FEATURE_SK_TX_STATUS |
NL80211_FEATURE_SAE |
NL80211_FEATURE_HT_IBSS |
NL80211_FEATURE_VIF_TXPOWER |
NL80211_FEATURE_MAC_ON_CREATE |
NL80211_FEATURE_USERSPACE_MPM |
NL80211_FEATURE_FULL_AP_CLIENT_STATE;
wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_FILS_STA);
wiphy_ext_feature_set(wiphy,
NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211);
wiphy_ext_feature_set(wiphy,
NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH);
wiphy_ext_feature_set(wiphy,
NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS);
wiphy_ext_feature_set(wiphy,
NL80211_EXT_FEATURE_SCAN_FREQ_KHZ);
if (!ops->hw_scan) {
wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN |
NL80211_FEATURE_AP_SCAN;
/*
* if the driver behaves correctly using the probe request
* (template) from mac80211, then both of these should be
* supported even with hw scan - but let drivers opt in.
*/
wiphy_ext_feature_set(wiphy,
NL80211_EXT_FEATURE_SCAN_RANDOM_SN);
wiphy_ext_feature_set(wiphy,
NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT);
}
if (!ops->set_key)
wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
if (ops->wake_tx_queue)
wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_TXQS);
wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_RRM);
wiphy->bss_priv_size = sizeof(struct ieee80211_bss);
local = wiphy_priv(wiphy);
if (sta_info_init(local))
goto err_free;
local->hw.wiphy = wiphy;
local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN);
local->ops = ops;
local->use_chanctx = use_chanctx;
/*
* We need a bit of data queued to build aggregates properly, so
* instruct the TCP stack to allow more than a single ms of data
* to be queued in the stack. The value is a bit-shift of 1
* second, so 7 is ~8ms of queued data. Only affects local TCP
* sockets.
* This is the default, anyhow - drivers may need to override it
* for local reasons (longer buffers, longer completion time, or
* similar).
*/
local->hw.tx_sk_pacing_shift = 7;
/* set up some defaults */
local->hw.queues = 1;
local->hw.max_rates = 1;
local->hw.max_report_rates = 0;
local->hw.max_rx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF_HT;
local->hw.max_tx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF_HT;
local->hw.offchannel_tx_hw_queue = IEEE80211_INVAL_HW_QUEUE;
local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
local->hw.radiotap_mcs_details = IEEE80211_RADIOTAP_MCS_HAVE_MCS |
IEEE80211_RADIOTAP_MCS_HAVE_GI |
IEEE80211_RADIOTAP_MCS_HAVE_BW;
local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI |
IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH;
local->hw.uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES;
local->hw.uapsd_max_sp_len = IEEE80211_DEFAULT_MAX_SP_LEN;
local->hw.max_mtu = IEEE80211_MAX_DATA_LEN;
local->user_power_level = IEEE80211_UNSET_POWER_LEVEL;
wiphy->ht_capa_mod_mask = &mac80211_ht_capa_mod_mask;
wiphy->vht_capa_mod_mask = &mac80211_vht_capa_mod_mask;
local->ext_capa[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF;
wiphy->extended_capabilities = local->ext_capa;
wiphy->extended_capabilities_mask = local->ext_capa;
wiphy->extended_capabilities_len =
ARRAY_SIZE(local->ext_capa);
INIT_LIST_HEAD(&local->interfaces);
INIT_LIST_HEAD(&local->mon_list);
__hw_addr_init(&local->mc_list);
mutex_init(&local->iflist_mtx);
mutex_init(&local->mtx);
mutex_init(&local->key_mtx);
spin_lock_init(&local->filter_lock);
spin_lock_init(&local->rx_path_lock);
spin_lock_init(&local->queue_stop_reason_lock);
for (i = 0; i < IEEE80211_NUM_ACS; i++) {
INIT_LIST_HEAD(&local->active_txqs[i]);
spin_lock_init(&local->active_txq_lock[i]);
local->aql_txq_limit_low[i] = IEEE80211_DEFAULT_AQL_TXQ_LIMIT_L;
local->aql_txq_limit_high[i] =
IEEE80211_DEFAULT_AQL_TXQ_LIMIT_H;
atomic_set(&local->aql_ac_pending_airtime[i], 0);
}
local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX;
local->aql_threshold = IEEE80211_AQL_THRESHOLD;
atomic_set(&local->aql_total_pending_airtime, 0);
INIT_LIST_HEAD(&local->chanctx_list);
mutex_init(&local->chanctx_mtx);
INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
INIT_WORK(&local->restart_work, ieee80211_restart_work);
INIT_WORK(&local->radar_detected_work,
ieee80211_dfs_radar_detected_work);
INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter);
local->smps_mode = IEEE80211_SMPS_OFF;
INIT_WORK(&local->dynamic_ps_enable_work,
ieee80211_dynamic_ps_enable_work);
INIT_WORK(&local->dynamic_ps_disable_work,
ieee80211_dynamic_ps_disable_work);
timer_setup(&local->dynamic_ps_timer, ieee80211_dynamic_ps_timer, 0);
INIT_WORK(&local->sched_scan_stopped_work,
ieee80211_sched_scan_stopped_work);
spin_lock_init(&local->ack_status_lock);
idr_init(&local->ack_status_frames);
for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
skb_queue_head_init(&local->pending[i]);
atomic_set(&local->agg_queue_stop[i], 0);
}
tasklet_setup(&local->tx_pending_tasklet, ieee80211_tx_pending);
if (ops->wake_tx_queue)
tasklet_setup(&local->wake_txqs_tasklet, ieee80211_wake_txqs);
tasklet_setup(&local->tasklet, ieee80211_tasklet_handler);
skb_queue_head_init(&local->skb_queue);
skb_queue_head_init(&local->skb_queue_unreliable);
ieee80211_alloc_led_names(local);
ieee80211_roc_setup(local);
local->hw.radiotap_timestamp.units_pos = -1;
local->hw.radiotap_timestamp.accuracy = -1;
return &local->hw;
err_free:
wiphy_free(wiphy);
return NULL;
}
EXPORT_SYMBOL(ieee80211_alloc_hw_nm);
static int ieee80211_init_cipher_suites(struct ieee80211_local *local)
{
bool have_wep = !fips_enabled; /* FIPS does not permit the use of RC4 */
bool have_mfp = ieee80211_hw_check(&local->hw, MFP_CAPABLE);
int r = 0, w = 0;
u32 *suites;
static const u32 cipher_suites[] = {
/* keep WEP first, it may be removed below */
WLAN_CIPHER_SUITE_WEP40,
WLAN_CIPHER_SUITE_WEP104,
WLAN_CIPHER_SUITE_TKIP,
WLAN_CIPHER_SUITE_CCMP,
WLAN_CIPHER_SUITE_CCMP_256,
WLAN_CIPHER_SUITE_GCMP,
WLAN_CIPHER_SUITE_GCMP_256,
/* keep last -- depends on hw flags! */
WLAN_CIPHER_SUITE_AES_CMAC,
WLAN_CIPHER_SUITE_BIP_CMAC_256,
WLAN_CIPHER_SUITE_BIP_GMAC_128,
WLAN_CIPHER_SUITE_BIP_GMAC_256,
};
if (ieee80211_hw_check(&local->hw, SW_CRYPTO_CONTROL) ||
local->hw.wiphy->cipher_suites) {
/* If the driver advertises, or doesn't support SW crypto,
* we only need to remove WEP if necessary.
*/
if (have_wep)
return 0;
/* well if it has _no_ ciphers ... fine */
if (!local->hw.wiphy->n_cipher_suites)
return 0;
/* Driver provides cipher suites, but we need to exclude WEP */
suites = kmemdup(local->hw.wiphy->cipher_suites,
sizeof(u32) * local->hw.wiphy->n_cipher_suites,
GFP_KERNEL);
if (!suites)
return -ENOMEM;
for (r = 0; r < local->hw.wiphy->n_cipher_suites; r++) {
u32 suite = local->hw.wiphy->cipher_suites[r];
if (suite == WLAN_CIPHER_SUITE_WEP40 ||
suite == WLAN_CIPHER_SUITE_WEP104)
continue;
suites[w++] = suite;
}
} else {
/* assign the (software supported and perhaps offloaded)
* cipher suites
*/
local->hw.wiphy->cipher_suites = cipher_suites;
local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
if (!have_mfp)
local->hw.wiphy->n_cipher_suites -= 4;
if (!have_wep) {
local->hw.wiphy->cipher_suites += 2;
local->hw.wiphy->n_cipher_suites -= 2;
}
/* not dynamically allocated, so just return */
return 0;
}
local->hw.wiphy->cipher_suites = suites;
local->hw.wiphy->n_cipher_suites = w;
local->wiphy_ciphers_allocated = true;
return 0;
}
int ieee80211_register_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
int result, i;
enum nl80211_band band;
int channels, max_bitrates;
bool supp_ht, supp_vht, supp_he, supp_eht;
struct cfg80211_chan_def dflt_chandef = {};
if (ieee80211_hw_check(hw, QUEUE_CONTROL) &&
(local->hw.offchannel_tx_hw_queue == IEEE80211_INVAL_HW_QUEUE ||
local->hw.offchannel_tx_hw_queue >= local->hw.queues))
return -EINVAL;
if ((hw->wiphy->features & NL80211_FEATURE_TDLS_CHANNEL_SWITCH) &&
(!local->ops->tdls_channel_switch ||
!local->ops->tdls_cancel_channel_switch ||
!local->ops->tdls_recv_channel_switch))
return -EOPNOTSUPP;
if (WARN_ON(ieee80211_hw_check(hw, SUPPORTS_TX_FRAG) &&
!local->ops->set_frag_threshold))
return -EINVAL;
if (WARN_ON(local->hw.wiphy->interface_modes &
BIT(NL80211_IFTYPE_NAN) &&
(!local->ops->start_nan || !local->ops->stop_nan)))
return -EINVAL;
if (hw->wiphy->flags & WIPHY_FLAG_SUPPORTS_MLO) {
/*
* For drivers capable of doing MLO, assume modern driver
* or firmware facilities, so software doesn't have to do
* as much, e.g. monitoring beacons would be hard if we
* might not even know which link is active at which time.
*/
if (WARN_ON(!local->use_chanctx))
return -EINVAL;
if (WARN_ON(!local->ops->link_info_changed))
return -EINVAL;
if (WARN_ON(!ieee80211_hw_check(hw, HAS_RATE_CONTROL)))
return -EINVAL;
if (WARN_ON(!ieee80211_hw_check(hw, AMPDU_AGGREGATION)))
return -EINVAL;
if (WARN_ON(ieee80211_hw_check(hw, HOST_BROADCAST_PS_BUFFERING)))
return -EINVAL;
if (WARN_ON(ieee80211_hw_check(hw, SUPPORTS_PS) &&
(!ieee80211_hw_check(hw, SUPPORTS_DYNAMIC_PS) ||
ieee80211_hw_check(hw, PS_NULLFUNC_STACK))))
return -EINVAL;
if (WARN_ON(!ieee80211_hw_check(hw, MFP_CAPABLE)))
return -EINVAL;
if (WARN_ON(!ieee80211_hw_check(hw, CONNECTION_MONITOR)))
return -EINVAL;
if (WARN_ON(ieee80211_hw_check(hw, NEED_DTIM_BEFORE_ASSOC)))
return -EINVAL;
if (WARN_ON(ieee80211_hw_check(hw, TIMING_BEACON_ONLY)))
return -EINVAL;
if (WARN_ON(!ieee80211_hw_check(hw, AP_LINK_PS)))
return -EINVAL;
if (WARN_ON(ieee80211_hw_check(hw, DEAUTH_NEED_MGD_TX_PREP)))
return -EINVAL;
}
#ifdef CONFIG_PM
if (hw->wiphy->wowlan && (!local->ops->suspend || !local->ops->resume))
return -EINVAL;
#endif
if (!local->use_chanctx) {
for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) {
const struct ieee80211_iface_combination *comb;
comb = &local->hw.wiphy->iface_combinations[i];
if (comb->num_different_channels > 1)
return -EINVAL;
}
} else {
/* DFS is not supported with multi-channel combinations yet */
for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) {
const struct ieee80211_iface_combination *comb;
comb = &local->hw.wiphy->iface_combinations[i];
if (comb->radar_detect_widths &&
comb->num_different_channels > 1)
return -EINVAL;
}
}
/* Only HW csum features are currently compatible with mac80211 */
if (WARN_ON(hw->netdev_features & ~MAC80211_SUPPORTED_FEATURES))
return -EINVAL;
if (hw->max_report_rates == 0)
hw->max_report_rates = hw->max_rates;
local->rx_chains = 1;
/*
* generic code guarantees at least one band,
* set this very early because much code assumes
* that hw.conf.channel is assigned
*/
channels = 0;
max_bitrates = 0;
supp_ht = false;
supp_vht = false;
supp_he = false;
supp_eht = false;
for (band = 0; band < NUM_NL80211_BANDS; band++) {
struct ieee80211_supported_band *sband;
sband = local->hw.wiphy->bands[band];
if (!sband)
continue;
if (!dflt_chandef.chan) {
/*
* Assign the first enabled channel to dflt_chandef
* from the list of channels
*/
for (i = 0; i < sband->n_channels; i++)
if (!(sband->channels[i].flags &
IEEE80211_CHAN_DISABLED))
break;
/* if none found then use the first anyway */
if (i == sband->n_channels)
i = 0;
cfg80211_chandef_create(&dflt_chandef,
&sband->channels[i],
NL80211_CHAN_NO_HT);
/* init channel we're on */
if (!local->use_chanctx && !local->_oper_chandef.chan) {
local->hw.conf.chandef = dflt_chandef;
local->_oper_chandef = dflt_chandef;
}
local->monitor_chandef = dflt_chandef;
}
channels += sband->n_channels;
if (max_bitrates < sband->n_bitrates)
max_bitrates = sband->n_bitrates;
supp_ht = supp_ht || sband->ht_cap.ht_supported;
supp_vht = supp_vht || sband->vht_cap.vht_supported;
for (i = 0; i < sband->n_iftype_data; i++) {
const struct ieee80211_sband_iftype_data *iftd;
iftd = &sband->iftype_data[i];
supp_he = supp_he || iftd->he_cap.has_he;
supp_eht = supp_eht || iftd->eht_cap.has_eht;
}
/* HT, VHT, HE require QoS, thus >= 4 queues */
if (WARN_ON(local->hw.queues < IEEE80211_NUM_ACS &&
(supp_ht || supp_vht || supp_he)))
return -EINVAL;
/* EHT requires HE support */
if (WARN_ON(supp_eht && !supp_he))
return -EINVAL;
if (!sband->ht_cap.ht_supported)
continue;
/* TODO: consider VHT for RX chains, hopefully it's the same */
local->rx_chains =
max(ieee80211_mcs_to_chains(&sband->ht_cap.mcs),
local->rx_chains);
/* no need to mask, SM_PS_DISABLED has all bits set */
sband->ht_cap.cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
IEEE80211_HT_CAP_SM_PS_SHIFT;
}
/* if low-level driver supports AP, we also support VLAN.
* drivers advertising SW_CRYPTO_CONTROL should enable AP_VLAN
* based on their support to transmit SW encrypted packets.
*/
if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP) &&
!ieee80211_hw_check(&local->hw, SW_CRYPTO_CONTROL)) {
hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN);
hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_AP_VLAN);
}
/* mac80211 always supports monitor */
hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_MONITOR);
/* mac80211 doesn't support more than one IBSS interface right now */
for (i = 0; i < hw->wiphy->n_iface_combinations; i++) {
const struct ieee80211_iface_combination *c;
int j;
c = &hw->wiphy->iface_combinations[i];
for (j = 0; j < c->n_limits; j++)
if ((c->limits[j].types & BIT(NL80211_IFTYPE_ADHOC)) &&
c->limits[j].max > 1)
return -EINVAL;
}
local->int_scan_req = kzalloc(sizeof(*local->int_scan_req) +
sizeof(void *) * channels, GFP_KERNEL);
if (!local->int_scan_req)
return -ENOMEM;
for (band = 0; band < NUM_NL80211_BANDS; band++) {
if (!local->hw.wiphy->bands[band])
continue;
local->int_scan_req->rates[band] = (u32) -1;
}
#ifndef CONFIG_MAC80211_MESH
/* mesh depends on Kconfig, but drivers should set it if they want */
local->hw.wiphy->interface_modes &= ~BIT(NL80211_IFTYPE_MESH_POINT);
#endif
/* if the underlying driver supports mesh, mac80211 will (at least)
* provide routing of mesh authentication frames to userspace */
if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_MESH_POINT))
local->hw.wiphy->flags |= WIPHY_FLAG_MESH_AUTH;
/* mac80211 supports control port protocol changing */
local->hw.wiphy->flags |= WIPHY_FLAG_CONTROL_PORT_PROTOCOL;
if (ieee80211_hw_check(&local->hw, SIGNAL_DBM)) {
local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
} else if (ieee80211_hw_check(&local->hw, SIGNAL_UNSPEC)) {
local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
if (hw->max_signal <= 0) {
result = -EINVAL;
goto fail_workqueue;
}
}
/* Mac80211 and therefore all drivers using SW crypto only
* are able to handle PTK rekeys and Extended Key ID.
*/
if (!local->ops->set_key) {
wiphy_ext_feature_set(local->hw.wiphy,
NL80211_EXT_FEATURE_CAN_REPLACE_PTK0);
wiphy_ext_feature_set(local->hw.wiphy,
NL80211_EXT_FEATURE_EXT_KEY_ID);
}
if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_ADHOC))
wiphy_ext_feature_set(local->hw.wiphy,
NL80211_EXT_FEATURE_DEL_IBSS_STA);
/*
* Calculate scan IE length -- we need this to alloc
* memory and to subtract from the driver limit. It
* includes the DS Params, (extended) supported rates, and HT
* information -- SSID is the driver's responsibility.
*/
local->scan_ies_len = 4 + max_bitrates /* (ext) supp rates */ +
3 /* DS Params */;
if (supp_ht)
local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap);
if (supp_vht)
local->scan_ies_len +=
2 + sizeof(struct ieee80211_vht_cap);
/*
* HE cap element is variable in size - set len to allow max size */
if (supp_he) {
local->scan_ies_len +=
3 + sizeof(struct ieee80211_he_cap_elem) +
sizeof(struct ieee80211_he_mcs_nss_supp) +
IEEE80211_HE_PPE_THRES_MAX_LEN;
if (supp_eht)
local->scan_ies_len +=
3 + sizeof(struct ieee80211_eht_cap_elem) +
sizeof(struct ieee80211_eht_mcs_nss_supp) +
IEEE80211_EHT_PPE_THRES_MAX_LEN;
}
if (!local->ops->hw_scan) {
/* For hw_scan, driver needs to set these up. */
local->hw.wiphy->max_scan_ssids = 4;
local->hw.wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
}
/*
* If the driver supports any scan IEs, then assume the
* limit includes the IEs mac80211 will add, otherwise
* leave it at zero and let the driver sort it out; we
* still pass our IEs to the driver but userspace will
* not be allowed to in that case.
*/
if (local->hw.wiphy->max_scan_ie_len)
local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len;
result = ieee80211_init_cipher_suites(local);
if (result < 0)
goto fail_workqueue;
if (!local->ops->remain_on_channel)
local->hw.wiphy->max_remain_on_channel_duration = 5000;
/* mac80211 based drivers don't support internal TDLS setup */
if (local->hw.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS)
local->hw.wiphy->flags |= WIPHY_FLAG_TDLS_EXTERNAL_SETUP;
/* mac80211 supports eCSA, if the driver supports STA CSA at all */
if (ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA))
local->ext_capa[0] |= WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING;
/* mac80211 supports multi BSSID, if the driver supports it */
if (ieee80211_hw_check(&local->hw, SUPPORTS_MULTI_BSSID)) {
local->hw.wiphy->support_mbssid = true;
if (ieee80211_hw_check(&local->hw,
SUPPORTS_ONLY_HE_MULTI_BSSID))
local->hw.wiphy->support_only_he_mbssid = true;
else
local->ext_capa[2] |=
WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT;
}
local->hw.wiphy->max_num_csa_counters = IEEE80211_MAX_CNTDWN_COUNTERS_NUM;
/*
* We use the number of queues for feature tests (QoS, HT) internally
* so restrict them appropriately.
*/
if (hw->queues > IEEE80211_MAX_QUEUES)
hw->queues = IEEE80211_MAX_QUEUES;
local->workqueue =
alloc_ordered_workqueue("%s", 0, wiphy_name(local->hw.wiphy));
if (!local->workqueue) {
result = -ENOMEM;
goto fail_workqueue;
}
/*
* The hardware needs headroom for sending the frame,
* and we need some headroom for passing the frame to monitor
* interfaces, but never both at the same time.
*/
local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
IEEE80211_TX_STATUS_HEADROOM);
/*
* if the driver doesn't specify a max listen interval we
* use 5 which should be a safe default
*/
if (local->hw.max_listen_interval == 0)
local->hw.max_listen_interval = 5;
local->hw.conf.listen_interval = local->hw.max_listen_interval;
local->dynamic_ps_forced_timeout = -1;
if (!local->hw.max_nan_de_entries)
local->hw.max_nan_de_entries = IEEE80211_MAX_NAN_INSTANCE_ID;
if (!local->hw.weight_multiplier)
local->hw.weight_multiplier = 1;
ieee80211_wep_init(local);
local->hw.conf.flags = IEEE80211_CONF_IDLE;
ieee80211_led_init(local);
result = ieee80211_txq_setup_flows(local);
if (result)
goto fail_flows;
rtnl_lock();
result = ieee80211_init_rate_ctrl_alg(local,
hw->rate_control_algorithm);
rtnl_unlock();
if (result < 0) {
wiphy_debug(local->hw.wiphy,
"Failed to initialize rate control algorithm\n");
goto fail_rate;
}
if (local->rate_ctrl) {
clear_bit(IEEE80211_HW_SUPPORTS_VHT_EXT_NSS_BW, hw->flags);
if (local->rate_ctrl->ops->capa & RATE_CTRL_CAPA_VHT_EXT_NSS_BW)
ieee80211_hw_set(hw, SUPPORTS_VHT_EXT_NSS_BW);
}
/*
* If the VHT capabilities don't have IEEE80211_VHT_EXT_NSS_BW_CAPABLE,
* or have it when we don't, copy the sband structure and set/clear it.
* This is necessary because rate scaling algorithms could be switched
* and have different support values.
* Print a message so that in the common case the reallocation can be
* avoided.
*/
BUILD_BUG_ON(NUM_NL80211_BANDS > 8 * sizeof(local->sband_allocated));
for (band = 0; band < NUM_NL80211_BANDS; band++) {
struct ieee80211_supported_band *sband;
bool local_cap, ie_cap;
local_cap = ieee80211_hw_check(hw, SUPPORTS_VHT_EXT_NSS_BW);
sband = local->hw.wiphy->bands[band];
if (!sband || !sband->vht_cap.vht_supported)
continue;
ie_cap = !!(sband->vht_cap.vht_mcs.tx_highest &
cpu_to_le16(IEEE80211_VHT_EXT_NSS_BW_CAPABLE));
if (local_cap == ie_cap)
continue;
sband = kmemdup(sband, sizeof(*sband), GFP_KERNEL);
if (!sband) {
result = -ENOMEM;
goto fail_rate;
}
wiphy_dbg(hw->wiphy, "copying sband (band %d) due to VHT EXT NSS BW flag\n",
band);
sband->vht_cap.vht_mcs.tx_highest ^=
cpu_to_le16(IEEE80211_VHT_EXT_NSS_BW_CAPABLE);
local->hw.wiphy->bands[band] = sband;
local->sband_allocated |= BIT(band);
}
result = wiphy_register(local->hw.wiphy);
if (result < 0)
goto fail_wiphy_register;
debugfs_hw_add(local);
rate_control_add_debugfs(local);
rtnl_lock();
wiphy_lock(hw->wiphy);
/* add one default STA interface if supported */
if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION) &&
!ieee80211_hw_check(hw, NO_AUTO_VIF)) {
struct vif_params params = {0};
result = ieee80211_if_add(local, "wlan%d", NET_NAME_ENUM, NULL,
NL80211_IFTYPE_STATION, &params);
if (result)
wiphy_warn(local->hw.wiphy,
"Failed to add default virtual iface\n");
}
wiphy_unlock(hw->wiphy);
rtnl_unlock();
#ifdef CONFIG_INET
local->ifa_notifier.notifier_call = ieee80211_ifa_changed;
result = register_inetaddr_notifier(&local->ifa_notifier);
if (result)
goto fail_ifa;
#endif
#if IS_ENABLED(CONFIG_IPV6)
local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
result = register_inet6addr_notifier(&local->ifa6_notifier);
if (result)
goto fail_ifa6;
#endif
return 0;
#if IS_ENABLED(CONFIG_IPV6)
fail_ifa6:
#ifdef CONFIG_INET
unregister_inetaddr_notifier(&local->ifa_notifier);
#endif
#endif
#if defined(CONFIG_INET) || defined(CONFIG_IPV6)
fail_ifa:
#endif
wiphy_unregister(local->hw.wiphy);
fail_wiphy_register:
rtnl_lock();
rate_control_deinitialize(local);
ieee80211_remove_interfaces(local);
rtnl_unlock();
fail_rate:
fail_flows:
ieee80211_led_exit(local);
destroy_workqueue(local->workqueue);
fail_workqueue:
if (local->wiphy_ciphers_allocated)
kfree(local->hw.wiphy->cipher_suites);
kfree(local->int_scan_req);
return result;
}
EXPORT_SYMBOL(ieee80211_register_hw);
void ieee80211_unregister_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
tasklet_kill(&local->tx_pending_tasklet);
tasklet_kill(&local->tasklet);
#ifdef CONFIG_INET
unregister_inetaddr_notifier(&local->ifa_notifier);
#endif
#if IS_ENABLED(CONFIG_IPV6)
unregister_inet6addr_notifier(&local->ifa6_notifier);
#endif
rtnl_lock();
/*
* At this point, interface list manipulations are fine
* because the driver cannot be handing us frames any
* more and the tasklet is killed.
*/
ieee80211_remove_interfaces(local);
rtnl_unlock();
cancel_delayed_work_sync(&local->roc_work);
cancel_work_sync(&local->restart_work);
cancel_work_sync(&local->reconfig_filter);
flush_work(&local->sched_scan_stopped_work);
flush_work(&local->radar_detected_work);
ieee80211_clear_tx_pending(local);
rate_control_deinitialize(local);
if (skb_queue_len(&local->skb_queue) ||
skb_queue_len(&local->skb_queue_unreliable))
wiphy_warn(local->hw.wiphy, "skb_queue not empty\n");
skb_queue_purge(&local->skb_queue);
skb_queue_purge(&local->skb_queue_unreliable);
wiphy_unregister(local->hw.wiphy);
destroy_workqueue(local->workqueue);
ieee80211_led_exit(local);
kfree(local->int_scan_req);
}
EXPORT_SYMBOL(ieee80211_unregister_hw);
static int ieee80211_free_ack_frame(int id, void *p, void *data)
{
WARN_ONCE(1, "Have pending ack frames!\n");
kfree_skb(p);
return 0;
}
void ieee80211_free_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
enum nl80211_band band;
mutex_destroy(&local->iflist_mtx);
mutex_destroy(&local->mtx);
if (local->wiphy_ciphers_allocated)
kfree(local->hw.wiphy->cipher_suites);
idr_for_each(&local->ack_status_frames,
ieee80211_free_ack_frame, NULL);
idr_destroy(&local->ack_status_frames);
sta_info_stop(local);
ieee80211_free_led_names(local);
for (band = 0; band < NUM_NL80211_BANDS; band++) {
if (!(local->sband_allocated & BIT(band)))
continue;
kfree(local->hw.wiphy->bands[band]);
}
wiphy_free(local->hw.wiphy);
}
EXPORT_SYMBOL(ieee80211_free_hw);
static int __init ieee80211_init(void)
{
struct sk_buff *skb;
int ret;
BUILD_BUG_ON(sizeof(struct ieee80211_tx_info) > sizeof(skb->cb));
BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, driver_data) +
IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb));
ret = rc80211_minstrel_init();
if (ret)
return ret;
ret = ieee80211_iface_init();
if (ret)
goto err_netdev;
return 0;
err_netdev:
rc80211_minstrel_exit();
return ret;
}
static void __exit ieee80211_exit(void)
{
rc80211_minstrel_exit();
ieee80211s_stop();
ieee80211_iface_exit();
rcu_barrier();
}
subsys_initcall(ieee80211_init);
module_exit(ieee80211_exit);
MODULE_DESCRIPTION("IEEE 802.11 subsystem");
MODULE_LICENSE("GPL");