Reinhard Speyerer 094ae245f7 USB: serial: option: add Quectel RM500Q R13 firmware support ... commit 06f22cd6635bdae7d73566fca9879b2026a08e00 upstream. Add support for Quectel RM500Q R13 firmware which uses Prot=40 for the NMEA port: T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2c7c ProdID=0800 Rev= 4.14 S: Manufacturer=Quectel S: Product=RM500Q-AE S: SerialNumber=xxxxxxxx C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2024-01-05 15:13:33 +01:00
..
atm	…
c67x00	…
cdns3	usb: cdnsp: Fix deadlock issue during using NCM gadget	2023-12-03 07:31:25 +01:00
chipidea	usb: chipidea: Simplify Tegra DMA alignment code	2023-11-20 11:08:25 +01:00
class	USB: usbtmc: Fix direction for 0-length ioctl control messages	2023-05-24 17:36:52 +01:00
common	usb: common: usb-conn-gpio: Prevent bailing out if initial role is none	2023-08-16 18:21:59 +02:00
core	usb: config: fix iteration issue in 'usb_get_bos_descriptor()'	2023-12-08 08:48:02 +01:00
dwc2	USB: dwc2: write HCINT with INTMASK applied	2023-12-03 07:31:25 +01:00
dwc3	USB: dwc3: qcom: fix wakeup after probe deferral	2023-12-03 07:31:26 +01:00
early	usb: early: xhci-dbc: Fix a potential out-of-bound memory access	2023-03-10 09:39:39 +01:00
gadget	USB: gadget: core: adjust uevent timing on gadget unbind	2023-12-20 15:17:43 +01:00
host	Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1"	2023-12-13 18:36:48 +01:00
image	…
isp1760	usb: isp1760: Fix out-of-bounds array access	2022-06-09 10:22:27 +02:00
misc	USB: sisusbvga: Add endpoint checks	2023-05-30 13:55:31 +01:00
mon	usb: mon: make mmapped memory read only	2022-10-12 09:53:28 +02:00
mtu3	usb: mtu3: fix kernel panic at qmu transfer done irq handler	2023-05-11 23:00:33 +09:00
musb	usb: musb: Modify the "HWVers" register address	2023-10-19 23:05:35 +02:00
phy	usb: phy: mxs: fix getting wrong state with mxs_phy_is_otg_host()	2023-09-19 12:22:44 +02:00
renesas_usbhs	usb: renesas: Fix refcount leak bug	2022-08-25 11:40:33 +02:00
roles	Revert "usb: common: usb-conn-gpio: Set last role to unknown before initial detection"	2023-07-23 13:47:25 +02:00
serial	USB: serial: option: add Quectel RM500Q R13 firmware support	2024-01-05 15:13:33 +01:00
storage	usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility	2023-11-08 17:26:49 +01:00
typec	usb: typec: class: fix typec_altmode_put_partner to put plugs	2023-12-13 18:36:48 +01:00
usbip	USB: usbip: fix stub_dev hub disconnect	2023-11-20 11:08:26 +01:00
Kconfig	…
Makefile	…
usb-skeleton.c	…