WSL2-Linux-Kernel/sound/soc/omap/Kconfig

120 строки
3.9 KiB
Plaintext

config SND_OMAP_SOC
tristate "SoC Audio for the Texas Instruments OMAP chips"
depends on (ARCH_OMAP && DMA_OMAP) || (ARM && COMPILE_TEST)
select SND_DMAENGINE_PCM
config SND_OMAP_SOC_DMIC
tristate
config SND_OMAP_SOC_MCBSP
tristate
config SND_OMAP_SOC_MCPDM
tristate
config SND_OMAP_SOC_HDMI
tristate
config SND_OMAP_SOC_N810
tristate "SoC Audio support for Nokia N810"
depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C
depends on OMAP_MUX
select SND_OMAP_SOC_MCBSP
select SND_SOC_TLV320AIC3X
help
Say Y if you want to add support for SoC audio on Nokia N810.
config SND_OMAP_SOC_RX51
tristate "SoC Audio support for Nokia RX-51"
depends on SND_OMAP_SOC && ARM && (MACH_NOKIA_RX51 || COMPILE_TEST) && I2C
select SND_OMAP_SOC_MCBSP
select SND_SOC_TLV320AIC3X
select SND_SOC_TPA6130A2
depends on GPIOLIB
help
Say Y if you want to add support for SoC audio on Nokia RX-51
hardware. This is also known as Nokia N900 product.
config SND_OMAP_SOC_AMS_DELTA
tristate "SoC Audio support for Amstrad E3 (Delta) videophone"
depends on SND_OMAP_SOC && MACH_AMS_DELTA && TTY
select SND_OMAP_SOC_MCBSP
select SND_SOC_CX20442
help
Say Y if you want to add support for SoC audio device connected to
a handset and a speakerphone found on Amstrad E3 (Delta) videophone.
Note that in order to get those devices fully supported, you have to
build the kernel with standard serial port driver included and
configured for at least 4 ports. Then, from userspace, you must load
a line discipline #19 on the modem (ttyS3) serial line. The simplest
way to achieve this is to install util-linux-ng and use the included
ldattach utility. This can be started automatically from udev,
a simple rule like this one should do the trick (it does for me):
ACTION=="add", KERNEL=="controlC0", \
RUN+="/usr/sbin/ldattach 19 /dev/ttyS3"
config SND_OMAP_SOC_OSK5912
tristate "SoC Audio support for omap osk5912"
depends on SND_OMAP_SOC && MACH_OMAP_OSK && I2C
select SND_OMAP_SOC_MCBSP
select SND_SOC_TLV320AIC23_I2C
help
Say Y if you want to add support for SoC audio on osk5912.
config SND_OMAP_SOC_AM3517EVM
tristate "SoC Audio support for OMAP3517 / AM3517 EVM"
depends on SND_OMAP_SOC && MACH_OMAP3517EVM && I2C
select SND_OMAP_SOC_MCBSP
select SND_SOC_TLV320AIC23_I2C
help
Say Y if you want to add support for SoC audio on the OMAP3517 / AM3517
EVM.
config SND_OMAP_SOC_OMAP_TWL4030
tristate "SoC Audio support for TI SoC based boards with twl4030 codec"
depends on TWL4030_CORE && SND_OMAP_SOC
select SND_OMAP_SOC_MCBSP
select SND_SOC_TWL4030
help
Say Y if you want to add support for SoC audio on TI SoC based boards
using twl4030 as c codec. This driver currently supports:
- Beagleboard or Devkit8000
- Gumstix Overo or CompuLab CM-T35/CM-T3730
- IGEP v2
- OMAP3EVM
- SDP3430
- Zoom2
config SND_OMAP_SOC_OMAP_ABE_TWL6040
tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec"
depends on TWL6040_CORE && SND_OMAP_SOC && (ARCH_OMAP4 || COMPILE_TEST)
select SND_OMAP_SOC_DMIC
select SND_OMAP_SOC_MCPDM
select SND_SOC_TWL6040
select SND_SOC_DMIC
help
Say Y if you want to add support for SoC audio on OMAP boards using
ABE and twl6040 codec. This driver currently supports:
- SDP4430/Blaze boards
- PandaBoard (4430)
- PandaBoardES (4460)
config SND_OMAP_SOC_OMAP_HDMI
tristate "SoC Audio support for Texas Instruments OMAP HDMI"
depends on SND_OMAP_SOC && OMAP4_DSS_HDMI && OMAP2_DSS
select SND_OMAP_SOC_HDMI
select SND_SOC_HDMI_CODEC
select OMAP4_DSS_HDMI_AUDIO
help
Say Y if you want to add support for SoC HDMI audio on Texas Instruments
OMAP4 chips
config SND_OMAP_SOC_OMAP3_PANDORA
tristate "SoC Audio support for OMAP3 Pandora"
depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA
select SND_OMAP_SOC_MCBSP
select SND_SOC_TWL4030
help
Say Y if you want to add support for SoC audio on the OMAP3 Pandora.