microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/power/supply/bq2515x_charger.c

1170 строки
29 KiB
C
Исходник Ответственный История

// SPDX-License-Identifier: GPL-2.0
// BQ2515X Battery Charger Driver
// Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/gpio/consumer.h>
#include <linux/power_supply.h>
#include <linux/regmap.h>
#include <linux/types.h>
#define BQ2515X_MANUFACTURER "Texas Instruments"
#define BQ2515X_STAT0 0x00
#define BQ2515X_STAT1 0x01
#define BQ2515X_STAT2 0x02
#define BQ2515X_FLAG0 0x03
#define BQ2515X_FLAG1 0x04
#define BQ2515X_FLAG2 0x05
#define BQ2515X_FLAG3 0x06
#define BQ2515X_MASK0 0x07
#define BQ2515X_MASK1 0x08
#define BQ2515X_MASK2 0x09
#define BQ2515X_MASK3 0x0a
#define BQ2515X_VBAT_CTRL 0x12
#define BQ2515X_ICHG_CTRL 0x13
#define BQ2515X_PCHRGCTRL 0x14
#define BQ2515X_TERMCTRL 0x15
#define BQ2515X_BUVLO 0x16
#define BQ2515X_CHARGERCTRL0 0x17
#define BQ2515X_CHARGERCTRL1 0x18
#define BQ2515X_ILIMCTRL 0x19
#define BQ2515X_LDOCTRL 0x1d
#define BQ2515X_MRCTRL 0x30
#define BQ2515X_ICCTRL0 0x35
#define BQ2515X_ICCTRL1 0x36
#define BQ2515X_ICCTRL2 0x37
#define BQ2515X_ADCCTRL0 0x40
#define BQ2515X_ADCCTRL1 0x41
#define BQ2515X_ADC_VBAT_M 0x42
#define BQ2515X_ADC_VBAT_L 0x43
#define BQ2515X_ADC_TS_M 0x44
#define BQ2515X_ADC_TS_L 0x45
#define BQ2515X_ADC_ICHG_M 0x46
#define BQ2515X_ADC_ICHG_L 0x47
#define BQ2515X_ADC_ADCIN_M 0x48
#define BQ2515X_ADC_ADCIN_L 0x49
#define BQ2515X_ADC_VIN_M 0x4a
#define BQ2515X_ADC_VIN_L 0x4b
#define BQ2515X_ADC_PMID_M 0x4c
#define BQ2515X_ADC_PMID_L 0x4d
#define BQ2515X_ADC_IIN_M 0x4e
#define BQ2515X_ADC_IIN_L 0x4f
#define BQ2515X_ADC_COMP1_M 0x52
#define BQ2515X_ADC_COMP1_L 0X53
#define BQ2515X_ADC_COMP2_M 0X54
#define BQ2515X_ADC_COMP2_L 0x55
#define BQ2515X_ADC_COMP3_M 0x56
#define BQ2515X_ADC_COMP3_L 0x57
#define BQ2515X_ADC_READ_EN 0x58
#define BQ2515X_TS_FASTCHGCTRL 0x61
#define BQ2515X_TS_COLD 0x62
#define BQ2515X_TS_COOL 0x63
#define BQ2515X_TS_WARM 0x64
#define BQ2515X_TS_HOT 0x65
#define BQ2515X_DEVICE_ID 0x6f
#define BQ2515X_DEFAULT_ICHG_UA 10000
#define BQ25150_DEFAULT_ILIM_UA 100000
#define BQ25155_DEFAULT_ILIM_UA 500000
#define BQ2515X_DEFAULT_VBAT_REG_UV 4200000
#define BQ2515X_DEFAULT_IPRECHARGE_UA 2500
#define BQ2515X_DIVISOR 65536
#define BQ2515X_VBAT_BASE_VOLT 3600000
#define BQ2515X_VBAT_REG_MAX 4600000
#define BQ2515X_VBAT_REG_MIN 3600000
#define BQ2515X_VBAT_STEP_UV 10000
#define BQ2515X_UV_FACTOR 1000000
#define BQ2515X_VBAT_MULTIPLIER 6
#define BQ2515X_ICHG_DIVISOR 52429
#define BQ2515X_ICHG_CURR_STEP_THRESH_UA 318750
#define BQ2515X_ICHG_MIN_UA 0
#define BQ2515X_ICHG_MAX_UA 500000
#define BQ2515X_ICHG_RNG_1B0_UA 1250
#define BQ2515X_ICHG_RNG_1B1_UA 2500
#define BQ2515X_VLOWV_SEL_1B0_UV 3000000
#define BQ2515X_VLOWV_SEL_1B1_UV 2800000
#define BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA 18750
#define BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA 37500
#define BQ2515X_TWAKE2_MIN_US 1700000
#define BQ2515X_TWAKE2_MAX_US 2300000
#define BQ2515X_ILIM_150MA 0x2
#define BQ2515X_ILIM_MASK 0x7
#define BQ2515X_ILIM_MIN 50000
#define BQ2515X_ILIM_MAX 600000
#define BQ2515X_HEALTH_MASK 0xf
#define BQ2515X_ICHGRNG_MASK 0x80
#define BQ2515X_STAT0_MASK 0x0f
#define BQ2515X_STAT1_MASK 0x1f
#define BQ2515X_PRECHARGE_MASK 0x1f
#define BQ2515X_TS_HOT_STAT BIT(0)
#define BQ2515X_TS_WARM_STAT BIT(1)
#define BQ2515X_TS_COOL_STAT BIT(2)
#define BQ2515X_TS_COLD_STAT BIT(3)
#define BQ2515X_SAFETY_TIMER_EXP BIT(5)
#define BQ2515X_EN_VBAT_READ BIT(3)
#define BQ2515X_EN_ICHG_READ BIT(5)
#define BQ2515X_VIN_GOOD BIT(0)
#define BQ2515X_CHRG_DONE BIT(5)
#define BQ2515X_CV_CHRG_MODE BIT(6)
#define BQ2515X_VIN_OVP_FAULT_STAT BIT(7)
#define BQ2515X_WATCHDOG_DISABLE BIT(4)
#define BQ2515X_ICHARGE_RANGE BIT(7)
#define BQ2515X_VLOWV_SEL BIT(5)
#define BQ2515X_CHARGER_DISABLE BIT(0)
#define BQ2515X_HWRESET_14S_WD BIT(1)
static const int bq2515x_ilim_lvl_values[] = {
50000, 100000, 150000, 200000, 300000, 400000, 500000, 600000
};
/**
* struct bq2515x_init_data -
* @ilim: input current limit
* @ichg: fast charge current
* @vbatreg: battery regulation voltage
* @iprechg: precharge current
*/
struct bq2515x_init_data {
int ilim;
int ichg;
int vbatreg;
int iprechg;
};
enum bq2515x_id {
BQ25150,
BQ25155,
};
/**
* struct bq2515x_device -
* @mains: mains properties
* @battery: battery properties
* @regmap: register map structure
* @dev: device structure
*
* @reset_gpio: manual reset (MR) pin
* @powerdown_gpio: low power mode pin
* @ac_detect_gpio: power good (PG) pin
* @ce_gpio: charge enable (CE) pin
*
* @model_name: string value describing device model
* @device_id: value of device_id
* @mains_online: boolean value indicating power supply online
*
* @bq2515x_init_data init_data: charger initialization data structure
*/
struct bq2515x_device {
struct power_supply *mains;
struct power_supply *battery;
struct regmap *regmap;
struct device *dev;
struct gpio_desc *reset_gpio;
struct gpio_desc *powerdown_gpio;
struct gpio_desc *ac_detect_gpio;
struct gpio_desc *ce_gpio;
char model_name[I2C_NAME_SIZE];
int device_id;
bool mains_online;
struct bq2515x_init_data init_data;
};
static struct reg_default bq25150_reg_defaults[] = {
{BQ2515X_FLAG0, 0x0},
{BQ2515X_FLAG1, 0x0},
{BQ2515X_FLAG2, 0x0},
{BQ2515X_FLAG3, 0x0},
{BQ2515X_MASK0, 0x0},
{BQ2515X_MASK1, 0x0},
{BQ2515X_MASK2, 0x71},
{BQ2515X_MASK3, 0x0},
{BQ2515X_VBAT_CTRL, 0x3C},
{BQ2515X_ICHG_CTRL, 0x8},
{BQ2515X_PCHRGCTRL, 0x2},
{BQ2515X_TERMCTRL, 0x14},
{BQ2515X_BUVLO, 0x0},
{BQ2515X_CHARGERCTRL0, 0x82},
{BQ2515X_CHARGERCTRL1, 0x42},
{BQ2515X_ILIMCTRL, 0x1},
{BQ2515X_LDOCTRL, 0xB0},
{BQ2515X_MRCTRL, 0x2A},
{BQ2515X_ICCTRL0, 0x10},
{BQ2515X_ICCTRL1, 0x0},
{BQ2515X_ICCTRL2, 0x0},
{BQ2515X_ADCCTRL0, 0x2},
{BQ2515X_ADCCTRL1, 0x40},
{BQ2515X_ADC_COMP1_M, 0x23},
{BQ2515X_ADC_COMP1_L, 0x20},
{BQ2515X_ADC_COMP2_M, 0x38},
{BQ2515X_ADC_COMP2_L, 0x90},
{BQ2515X_ADC_COMP3_M, 0x0},
{BQ2515X_ADC_COMP3_L, 0x0},
{BQ2515X_ADC_READ_EN, 0x0},
{BQ2515X_TS_FASTCHGCTRL, 0x34},
{BQ2515X_TS_COLD, 0x7C},
{BQ2515X_TS_COOL, 0x6D},
{BQ2515X_TS_WARM, 0x38},
{BQ2515X_TS_HOT, 0x27},
{BQ2515X_DEVICE_ID, 0x20},
};
static struct reg_default bq25155_reg_defaults[] = {
{BQ2515X_FLAG0, 0x0},
{BQ2515X_FLAG1, 0x0},
{BQ2515X_FLAG2, 0x0},
{BQ2515X_FLAG3, 0x0},
{BQ2515X_MASK0, 0x0},
{BQ2515X_MASK1, 0x0},
{BQ2515X_MASK2, 0x71},
{BQ2515X_MASK3, 0x0},
{BQ2515X_VBAT_CTRL, 0x3C},
{BQ2515X_ICHG_CTRL, 0x8},
{BQ2515X_PCHRGCTRL, 0x2},
{BQ2515X_TERMCTRL, 0x14},
{BQ2515X_BUVLO, 0x0},
{BQ2515X_CHARGERCTRL0, 0x82},
{BQ2515X_CHARGERCTRL1, 0xC2},
{BQ2515X_ILIMCTRL, 0x6},
{BQ2515X_LDOCTRL, 0xB0},
{BQ2515X_MRCTRL, 0x2A},
{BQ2515X_ICCTRL0, 0x10},
{BQ2515X_ICCTRL1, 0x0},
{BQ2515X_ICCTRL2, 0x40},
{BQ2515X_ADCCTRL0, 0x2},
{BQ2515X_ADCCTRL1, 0x40},
{BQ2515X_ADC_COMP1_M, 0x23},
{BQ2515X_ADC_COMP1_L, 0x20},
{BQ2515X_ADC_COMP2_M, 0x38},
{BQ2515X_ADC_COMP2_L, 0x90},
{BQ2515X_ADC_COMP3_M, 0x0},
{BQ2515X_ADC_COMP3_L, 0x0},
{BQ2515X_ADC_READ_EN, 0x0},
{BQ2515X_TS_FASTCHGCTRL, 0x34},
{BQ2515X_TS_COLD, 0x7C},
{BQ2515X_TS_COOL, 0x6D},
{BQ2515X_TS_WARM, 0x38},
{BQ2515X_TS_HOT, 0x27},
{BQ2515X_DEVICE_ID, 0x35},
};
static int bq2515x_wake_up(struct bq2515x_device *bq2515x)
{
int ret;
int val;
/* Read the STAT register if we can read it then the device is out
* of ship mode. If the register cannot be read then attempt to wake
* it up and enable the ADC.
*/
ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
if (ret)
return ret;
/* Need to toggle LP and bring device out of ship mode. The device
* will exit the ship mode when the MR pin is held low for at least
* t_WAKE2 as shown in section 8.3.7.1 of the datasheet.
*/
gpiod_set_value_cansleep(bq2515x->powerdown_gpio, 0);
gpiod_set_value_cansleep(bq2515x->reset_gpio, 0);
usleep_range(BQ2515X_TWAKE2_MIN_US, BQ2515X_TWAKE2_MAX_US);
gpiod_set_value_cansleep(bq2515x->reset_gpio, 1);
return regmap_write(bq2515x->regmap, BQ2515X_ADC_READ_EN,
(BQ2515X_EN_VBAT_READ | BQ2515X_EN_ICHG_READ));
}
static int bq2515x_update_ps_status(struct bq2515x_device *bq2515x)
{
bool dc = false;
unsigned int val;
int ret;
if (bq2515x->ac_detect_gpio)
val = gpiod_get_value_cansleep(bq2515x->ac_detect_gpio);
else {
ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
if (ret)
return ret;
}
dc = val & BQ2515X_VIN_GOOD;
ret = bq2515x->mains_online != dc;
bq2515x->mains_online = dc;
return ret;
}
static int bq2515x_disable_watchdog_timers(struct bq2515x_device *bq2515x)
{
int ret;
ret = regmap_update_bits(bq2515x->regmap, BQ2515X_CHARGERCTRL0,
BQ2515X_WATCHDOG_DISABLE, BQ2515X_WATCHDOG_DISABLE);
if (ret)
return ret;
return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2,
BQ2515X_HWRESET_14S_WD, 0);
}
static int bq2515x_get_battery_voltage_now(struct bq2515x_device *bq2515x)
{
int ret;
int vbat_msb;
int vbat_lsb;
uint32_t vbat_measurement;
if (!bq2515x->mains_online)
bq2515x_wake_up(bq2515x);
ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_M, &vbat_msb);
if (ret)
return ret;
ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_L, &vbat_lsb);
if (ret)
return ret;
vbat_measurement = (vbat_msb << 8) | vbat_lsb;
return vbat_measurement * (BQ2515X_UV_FACTOR / BQ2515X_DIVISOR) *
BQ2515X_VBAT_MULTIPLIER;
}
static int bq2515x_get_battery_current_now(struct bq2515x_device *bq2515x)
{
int ret;
int ichg_msb;
int ichg_lsb;
uint32_t ichg_measurement;
u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
unsigned int ichg_reg_code, reg_code;
unsigned int icharge_range = 0, pchrgctrl;
unsigned int buvlo, vlowv_sel, vlowv = BQ2515X_VLOWV_SEL_1B0_UV;
if (!bq2515x->mains_online)
return -ENODATA;
ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_M, &ichg_msb);
if (ret)
return ret;
ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_L, &ichg_lsb);
if (ret)
return ret;
ichg_measurement = (ichg_msb << 8) | ichg_lsb;
ret = regmap_read(bq2515x->regmap, BQ2515X_BUVLO, &buvlo);
if (ret)
return ret;
vlowv_sel = buvlo & BQ2515X_VLOWV_SEL;
if (vlowv_sel)
vlowv = BQ2515X_VLOWV_SEL_1B1_UV;
if (bq2515x_get_battery_voltage_now(bq2515x) < vlowv) {
ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL,
&pchrgctrl);
if (ret)
return ret;
reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK;
} else {
ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL,
&ichg_reg_code);
if (ret)
return ret;
reg_code = ichg_reg_code;
}
ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
if (ret)
return ret;
icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
if (icharge_range)
ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
return reg_code * (ichg_multiplier * ichg_measurement /
BQ2515X_ICHG_DIVISOR);
}
static bool bq2515x_get_charge_disable(struct bq2515x_device *bq2515x)
{
int ret;
int ce_pin;
int icctrl2;
int charger_disable;
ce_pin = gpiod_get_value_cansleep(bq2515x->ce_gpio);
ret = regmap_read(bq2515x->regmap, BQ2515X_ICCTRL2, &icctrl2);
if (ret)
return ret;
charger_disable = icctrl2 & BQ2515X_CHARGER_DISABLE;
if (charger_disable || ce_pin)
return true;
return false;
}
static int bq2515x_set_charge_disable(struct bq2515x_device *bq2515x, int val)
{
gpiod_set_value_cansleep(bq2515x->ce_gpio, val);
return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2,
BQ2515X_CHARGER_DISABLE, val);
}
static int bq2515x_get_const_charge_current(struct bq2515x_device *bq2515x)
{
int ret;
u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
unsigned int ichg_reg_code;
unsigned int pchrgctrl;
unsigned int icharge_range;
ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL, &ichg_reg_code);
if (ret)
return ret;
ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
if (ret)
return ret;
icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
if (icharge_range)
ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
return ichg_reg_code * ichg_multiplier;
}
static int bq2515x_set_const_charge_current(struct bq2515x_device *bq2515x,
int val)
{
int ret;
unsigned int ichg_reg_code;
u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
unsigned int icharge_range = 0;
if (val > BQ2515X_ICHG_MAX_UA || val < BQ2515X_ICHG_MIN_UA)
return -EINVAL;
if (val > BQ2515X_ICHG_CURR_STEP_THRESH_UA) {
ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
icharge_range = BQ2515X_ICHARGE_RANGE;
}
bq2515x_set_charge_disable(bq2515x, 1);
ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL,
BQ2515X_ICHARGE_RANGE, icharge_range);
if (ret)
return ret;
ichg_reg_code = val / ichg_multiplier;
ret = regmap_write(bq2515x->regmap, BQ2515X_ICHG_CTRL, ichg_reg_code);
if (ret)
return ret;
return bq2515x_set_charge_disable(bq2515x, 0);
}
static int bq2515x_get_precharge_current(struct bq2515x_device *bq2515x)
{
int ret;
unsigned int pchrgctrl;
unsigned int icharge_range;
u16 precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
unsigned int precharge_reg_code;
ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
if (ret)
return ret;
icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
if (icharge_range)
precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
precharge_reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK;
return precharge_reg_code * precharge_multiplier;
}
static int bq2515x_set_precharge_current(struct bq2515x_device *bq2515x,
int val)
{
int ret;
unsigned int pchrgctrl;
unsigned int icharge_range;
unsigned int precharge_reg_code;
unsigned int precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
unsigned int precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA;
ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
if (ret)
return ret;
icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
if (icharge_range) {
precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA;
precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
} else {
precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA;
precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
}
if (val > precharge_max_ua || val < BQ2515X_ICHG_MIN_UA)
return -EINVAL;
precharge_reg_code = val / precharge_multiplier;
ret = bq2515x_set_charge_disable(bq2515x, 1);
if (ret)
return ret;
ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL,
BQ2515X_PRECHARGE_MASK, precharge_reg_code);
if (ret)
return ret;
return bq2515x_set_charge_disable(bq2515x, 0);
}
static int bq2515x_charging_status(struct bq2515x_device *bq2515x,
union power_supply_propval *val)
{
bool status0_no_fault;
bool status1_no_fault;
bool ce_status;
bool charge_done;
unsigned int status;
int ret;
if (!bq2515x->mains_online) {
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
return 0;
}
ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &status);
if (ret)
return ret;
/*
* The code block below is used to determine if any faults from the
* STAT0 register are disbaling charging or if the charge has completed
* according to the CHARGE_DONE_STAT bit.
*/
if (((status & BQ2515X_STAT0_MASK) == true) &
((status & BQ2515X_CHRG_DONE) == false)) {
status0_no_fault = true;
charge_done = false;
} else if (status & BQ2515X_CHRG_DONE) {
charge_done = true;
status0_no_fault = false;
} else {
status0_no_fault = false;
charge_done = false;
}
ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &status);
if (ret)
return ret;
/*
* The code block below is used to determine if any faults from the
* STAT1 register are disbaling charging
*/
if ((status & BQ2515X_STAT1_MASK) == false)
status1_no_fault = true;
else
status1_no_fault = false;
ce_status = (!bq2515x_get_charge_disable(bq2515x));
/*
* If there are no faults and charging is enabled, then status is
* charging. Otherwise, if charging is complete, then status is full.
* Otherwise, if a fault exists or charging is disabled, then status is
* not charging
*/
if (status0_no_fault & status1_no_fault & ce_status)
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else if (charge_done)
val->intval = POWER_SUPPLY_STATUS_FULL;
else if (!(status0_no_fault & status1_no_fault & ce_status))
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
return 0;
}
static int bq2515x_get_batt_reg(struct bq2515x_device *bq2515x)
{
int vbat_reg_code;
int ret;
ret = regmap_read(bq2515x->regmap, BQ2515X_VBAT_CTRL, &vbat_reg_code);
if (ret)
return ret;
return BQ2515X_VBAT_BASE_VOLT + vbat_reg_code * BQ2515X_VBAT_STEP_UV;
}
static int bq2515x_set_batt_reg(struct bq2515x_device *bq2515x, int val)
{
int vbat_reg_code;
if (val > BQ2515X_VBAT_REG_MAX || val < BQ2515X_VBAT_REG_MIN)
return -EINVAL;
vbat_reg_code = (val - BQ2515X_VBAT_BASE_VOLT) / BQ2515X_VBAT_STEP_UV;
return regmap_write(bq2515x->regmap, BQ2515X_VBAT_CTRL, vbat_reg_code);
}
static int bq2515x_get_ilim_lvl(struct bq2515x_device *bq2515x)
{
int ret;
int ilimctrl;
ret = regmap_read(bq2515x->regmap, BQ2515X_ILIMCTRL, &ilimctrl);
if (ret)
return ret;
return bq2515x_ilim_lvl_values[ilimctrl & BQ2515X_ILIM_MASK];
}
static int bq2515x_set_ilim_lvl(struct bq2515x_device *bq2515x, int val)
{
int i = 0;
unsigned int array_size = ARRAY_SIZE(bq2515x_ilim_lvl_values);
for (i = array_size - 1; i > 0; i--) {
if (val >= bq2515x_ilim_lvl_values[i])
break;
}
return regmap_write(bq2515x->regmap, BQ2515X_ILIMCTRL, i);
}
static int bq2515x_power_supply_property_is_writeable(struct power_supply *psy,
enum power_supply_property prop)
{
switch (prop) {
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
return true;
default:
return false;
}
}
static int bq2515x_charger_get_health(struct bq2515x_device *bq2515x,
union power_supply_propval *val)
{
int health = POWER_SUPPLY_HEALTH_GOOD;
int ret;
unsigned int stat1;
unsigned int flag3;
if (!bq2515x->mains_online)
bq2515x_wake_up(bq2515x);
ret = regmap_read(bq2515x->regmap, BQ2515X_FLAG3, &flag3);
if (ret)
return ret;
ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &stat1);
if (ret)
return ret;
if (stat1 & BQ2515X_HEALTH_MASK) {
switch (stat1 & BQ2515X_HEALTH_MASK) {
case BQ2515X_TS_HOT_STAT:
health = POWER_SUPPLY_HEALTH_HOT;
break;
case BQ2515X_TS_WARM_STAT:
health = POWER_SUPPLY_HEALTH_WARM;
break;
case BQ2515X_TS_COOL_STAT:
health = POWER_SUPPLY_HEALTH_COOL;
break;
case BQ2515X_TS_COLD_STAT:
health = POWER_SUPPLY_HEALTH_COLD;
break;
default:
health = POWER_SUPPLY_HEALTH_UNKNOWN;
break;
}
}
if (stat1 & BQ2515X_VIN_OVP_FAULT_STAT)
health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
if (flag3 & BQ2515X_SAFETY_TIMER_EXP)
health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
val->intval = health;
return 0;
}
static int bq2515x_mains_set_property(struct power_supply *psy,
enum power_supply_property prop,
const union power_supply_propval *val)
{
struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
int ret;
switch (prop) {
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
ret = bq2515x_set_batt_reg(bq2515x, val->intval);
break;
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
ret = bq2515x_set_const_charge_current(bq2515x, val->intval);
break;
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
ret = bq2515x_set_ilim_lvl(bq2515x, val->intval);
break;
case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
ret = bq2515x_set_precharge_current(bq2515x, val->intval);
break;
default:
return -EINVAL;
}
return ret;
}
static int bq2515x_mains_get_property(struct power_supply *psy,
enum power_supply_property prop,
union power_supply_propval *val)
{
struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
int ret = 0;
switch (prop) {
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
ret = bq2515x_get_const_charge_current(bq2515x);
if (ret < 0)
return ret;
val->intval = ret;
break;
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
ret = bq2515x_get_batt_reg(bq2515x);
if (ret < 0)
return ret;
val->intval = ret;
break;
case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
ret = bq2515x_get_precharge_current(bq2515x);
if (ret < 0)
return ret;
val->intval = ret;
break;
case POWER_SUPPLY_PROP_ONLINE:
val->intval = bq2515x->mains_online;
break;
case POWER_SUPPLY_PROP_HEALTH:
ret = bq2515x_charger_get_health(bq2515x, val);
if (ret)
val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
break;
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
ret = bq2515x_get_ilim_lvl(bq2515x);
if (ret < 0)
return ret;
val->intval = ret;
break;
case POWER_SUPPLY_PROP_MODEL_NAME:
val->strval = bq2515x->model_name;
break;
case POWER_SUPPLY_PROP_MANUFACTURER:
val->strval = BQ2515X_MANUFACTURER;
break;
case POWER_SUPPLY_PROP_STATUS:
ret = bq2515x_charging_status(bq2515x, val);
if (ret)
return ret;
break;
default:
return -EINVAL;
}
return ret;
}
static int bq2515x_battery_get_property(struct power_supply *psy,
enum power_supply_property prop,
union power_supply_propval *val)
{
struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
int ret;
ret = bq2515x_update_ps_status(bq2515x);
if (ret)
return ret;
switch (prop) {
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
ret = bq2515x->init_data.vbatreg;
if (ret < 0)
return ret;
val->intval = ret;
break;
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
ret = bq2515x->init_data.ichg;
if (ret < 0)
return ret;
val->intval = ret;
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
ret = bq2515x_get_battery_voltage_now(bq2515x);
if (ret < 0)
return ret;
val->intval = ret;
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
ret = bq2515x_get_battery_current_now(bq2515x);
if (ret < 0)
return ret;
val->intval = ret;
break;
default:
return -EINVAL;
}
return 0;
}
static enum power_supply_property bq2515x_battery_properties[] = {
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_CURRENT_NOW,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
};
static enum power_supply_property bq2515x_mains_properties[] = {
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
};
static struct power_supply_desc bq2515x_mains_desc = {
.name = "bq2515x-mains",
.type = POWER_SUPPLY_TYPE_MAINS,
.get_property = bq2515x_mains_get_property,
.set_property = bq2515x_mains_set_property,
.properties = bq2515x_mains_properties,
.num_properties = ARRAY_SIZE(bq2515x_mains_properties),
.property_is_writeable = bq2515x_power_supply_property_is_writeable,
};
static struct power_supply_desc bq2515x_battery_desc = {
.name = "bq2515x-battery",
.type = POWER_SUPPLY_TYPE_BATTERY,
.get_property = bq2515x_battery_get_property,
.properties = bq2515x_battery_properties,
.num_properties = ARRAY_SIZE(bq2515x_battery_properties),
.property_is_writeable = bq2515x_power_supply_property_is_writeable,
};
static int bq2515x_power_supply_register(struct bq2515x_device *bq2515x,
struct device *dev, struct power_supply_config psy_cfg)
{
bq2515x->mains = devm_power_supply_register(bq2515x->dev,
&bq2515x_mains_desc,
&psy_cfg);
if (IS_ERR(bq2515x->mains))
return -EINVAL;
bq2515x->battery = devm_power_supply_register(bq2515x->dev,
&bq2515x_battery_desc,
&psy_cfg);
if (IS_ERR(bq2515x->battery))
return -EINVAL;
return 0;
}
static int bq2515x_hw_init(struct bq2515x_device *bq2515x)
{
int ret;
struct power_supply_battery_info bat_info = { };
ret = bq2515x_disable_watchdog_timers(bq2515x);
if (ret)
return ret;
if (bq2515x->init_data.ilim) {
ret = bq2515x_set_ilim_lvl(bq2515x, bq2515x->init_data.ilim);
if (ret)
return ret;
}
ret = power_supply_get_battery_info(bq2515x->mains, &bat_info);
if (ret) {
dev_warn(bq2515x->dev, "battery info missing, default values will be applied\n");
bq2515x->init_data.ichg = BQ2515X_DEFAULT_ICHG_UA;
bq2515x->init_data.vbatreg = BQ2515X_DEFAULT_VBAT_REG_UV;
bq2515x->init_data.iprechg = BQ2515X_DEFAULT_IPRECHARGE_UA;
} else {
bq2515x->init_data.ichg =
bat_info.constant_charge_current_max_ua;
bq2515x->init_data.vbatreg =
bat_info.constant_charge_voltage_max_uv;
bq2515x->init_data.iprechg =
bat_info.precharge_current_ua;
}
ret = bq2515x_set_const_charge_current(bq2515x,
bq2515x->init_data.ichg);
if (ret)
return ret;
ret = bq2515x_set_batt_reg(bq2515x, bq2515x->init_data.vbatreg);
if (ret)
return ret;
return bq2515x_set_precharge_current(bq2515x,
bq2515x->init_data.iprechg);
}
static int bq2515x_read_properties(struct bq2515x_device *bq2515x)
{
int ret;
ret = device_property_read_u32(bq2515x->dev,
"input-current-limit-microamp",
&bq2515x->init_data.ilim);
if (ret) {
switch (bq2515x->device_id) {
case BQ25150:
bq2515x->init_data.ilim = BQ25150_DEFAULT_ILIM_UA;
break;
case BQ25155:
bq2515x->init_data.ilim = BQ25155_DEFAULT_ILIM_UA;
break;
}
}
bq2515x->ac_detect_gpio = devm_gpiod_get_optional(bq2515x->dev,
"ac-detect", GPIOD_IN);
if (IS_ERR(bq2515x->ac_detect_gpio)) {
ret = PTR_ERR(bq2515x->ac_detect_gpio);
dev_err(bq2515x->dev, "Failed to get ac detect");
return ret;
}
bq2515x->reset_gpio = devm_gpiod_get_optional(bq2515x->dev,
"reset", GPIOD_OUT_LOW);
if (IS_ERR(bq2515x->reset_gpio)) {
ret = PTR_ERR(bq2515x->reset_gpio);
dev_err(bq2515x->dev, "Failed to get reset");
return ret;
}
bq2515x->powerdown_gpio = devm_gpiod_get_optional(bq2515x->dev,
"powerdown", GPIOD_OUT_LOW);
if (IS_ERR(bq2515x->powerdown_gpio)) {
ret = PTR_ERR(bq2515x->powerdown_gpio);
dev_err(bq2515x->dev, "Failed to get powerdown");
return ret;
}
bq2515x->ce_gpio = devm_gpiod_get_optional(bq2515x->dev,
"charge-enable",
GPIOD_OUT_LOW);
if (IS_ERR(bq2515x->ce_gpio)) {
ret = PTR_ERR(bq2515x->ce_gpio);
dev_err(bq2515x->dev, "Failed to get ce");
return ret;
}
return 0;
}
static bool bq2515x_volatile_register(struct device *dev, unsigned int reg)
{
switch (reg) {
case BQ2515X_STAT0 ... BQ2515X_FLAG3:
case BQ2515X_ADC_VBAT_M ... BQ2515X_ADC_IIN_L:
return true;
default:
return false;
}
}
static const struct regmap_config bq25150_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = BQ2515X_DEVICE_ID,
.reg_defaults = bq25150_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(bq25150_reg_defaults),
.cache_type = REGCACHE_RBTREE,
.volatile_reg = bq2515x_volatile_register,
};
static const struct regmap_config bq25155_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = BQ2515X_DEVICE_ID,
.reg_defaults = bq25155_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(bq25155_reg_defaults),
.cache_type = REGCACHE_RBTREE,
.volatile_reg = bq2515x_volatile_register,
};
static int bq2515x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
struct bq2515x_device *bq2515x;
struct power_supply_config charger_cfg = {};
int ret;
bq2515x = devm_kzalloc(dev, sizeof(*bq2515x), GFP_KERNEL);
if (!bq2515x)
return -ENOMEM;
bq2515x->dev = dev;
strncpy(bq2515x->model_name, id->name, I2C_NAME_SIZE);
bq2515x->device_id = id->driver_data;
switch (bq2515x->device_id) {
case BQ25150:
bq2515x->regmap = devm_regmap_init_i2c(client,
&bq25150_regmap_config);
break;
case BQ25155:
bq2515x->regmap = devm_regmap_init_i2c(client,
&bq25155_regmap_config);
break;
}
if (IS_ERR(bq2515x->regmap)) {
dev_err(dev, "failed to allocate register map\n");
return PTR_ERR(bq2515x->regmap);
}
i2c_set_clientdata(client, bq2515x);
charger_cfg.drv_data = bq2515x;
charger_cfg.of_node = dev->of_node;
ret = bq2515x_read_properties(bq2515x);
if (ret) {
dev_err(dev, "Failed to read device tree properties %d\n",
ret);
return ret;
}
ret = bq2515x_power_supply_register(bq2515x, dev, charger_cfg);
if (ret) {
dev_err(dev, "failed to register power supply\n");
return ret;
}
ret = bq2515x_hw_init(bq2515x);
if (ret) {
dev_err(dev, "Cannot initialize the chip\n");
return ret;
}
return 0;
}
static const struct i2c_device_id bq2515x_i2c_ids[] = {
{ "bq25150", BQ25150, },
{ "bq25155", BQ25155, },
{},
};
MODULE_DEVICE_TABLE(i2c, bq2515x_i2c_ids);
static const struct of_device_id bq2515x_of_match[] = {
{ .compatible = "ti,bq25150", },
{ .compatible = "ti,bq25155", },
{ },
};
MODULE_DEVICE_TABLE(of, bq2515x_of_match);
static struct i2c_driver bq2515x_driver = {
.driver = {
.name = "bq2515x-charger",
.of_match_table = bq2515x_of_match,
},
.probe = bq2515x_probe,
.id_table = bq2515x_i2c_ids,
};
module_i2c_driver(bq2515x_driver);
MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
MODULE_AUTHOR("Ricardo Rivera-Matos <r-rivera-matos@ti.com>");
MODULE_DESCRIPTION("BQ2515X charger driver");
MODULE_LICENSE("GPL v2");
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку