WSL2-Linux-Kernel/arch/arm/boot/dts/meson.dtsi

175 строки
4.8 KiB
Plaintext

/*
* Copyright 2014 Carlo Caione <carlo@caione.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this library; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/include/ "skeleton.dtsi"
/ {
interrupt-parent = <&gic>;
L2: l2-cache-controller@c4200000 {
compatible = "arm,pl310-cache";
reg = <0xc4200000 0x1000>;
cache-unified;
cache-level = <2>;
};
gic: interrupt-controller@c4301000 {
compatible = "arm,cortex-a9-gic";
reg = <0xc4301000 0x1000>,
<0xc4300100 0x0100>;
interrupt-controller;
#interrupt-cells = <3>;
};
timer@c1109940 {
compatible = "amlogic,meson6-timer";
reg = <0xc1109940 0x14>;
interrupts = <0 10 1>;
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
wdt: watchdog@c1109900 {
compatible = "amlogic,meson6-wdt";
reg = <0xc1109900 0x8>;
};
uart_AO: serial@c81004c0 {
compatible = "amlogic,meson-uart";
reg = <0xc81004c0 0x14>;
interrupts = <0 90 1>;
clocks = <&clk81>;
status = "disabled";
};
uart_A: serial@c81084c0 {
compatible = "amlogic,meson-uart";
reg = <0xc81084c0 0x14>;
interrupts = <0 90 1>;
clocks = <&clk81>;
status = "disabled";
};
uart_B: serial@c81084dc {
compatible = "amlogic,meson-uart";
reg = <0xc81084dc 0x14>;
interrupts = <0 90 1>;
clocks = <&clk81>;
status = "disabled";
};
uart_C: serial@c8108700 {
compatible = "amlogic,meson-uart";
reg = <0xc8108700 0x14>;
interrupts = <0 90 1>;
clocks = <&clk81>;
status = "disabled";
};
i2c_AO: i2c@c8100500 {
compatible = "amlogic,meson6-i2c";
reg = <0xc8100500 0x20>;
interrupts = <0 92 1>;
clocks = <&clk81>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c_A: i2c@c1108500 {
compatible = "amlogic,meson6-i2c";
reg = <0xc1108500 0x20>;
interrupts = <0 21 1>;
clocks = <&clk81>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c_B: i2c@c11087c0 {
compatible = "amlogic,meson6-i2c";
reg = <0xc11087c0 0x20>;
interrupts = <0 128 1>;
clocks = <&clk81>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
ir_receiver: ir-receiver@c8100480 {
compatible= "amlogic,meson6-ir";
reg = <0xc8100480 0x20>;
interrupts = <0 15 1>;
status = "disabled";
};
spifc: spi@c1108c80 {
compatible = "amlogic,meson6-spifc";
reg = <0xc1108c80 0x80>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clk81>;
status = "disabled";
};
ethmac: ethernet@c9410000 {
compatible = "amlogic,meson6-dwmac", "snps,dwmac";
reg = <0xc9410000 0x10000
0xc1108108 0x4>;
interrupts = <0 8 1>;
interrupt-names = "macirq";
clocks = <&clk81>;
clock-names = "stmmaceth";
status = "disabled";
};
};
}; /* end of / */