WSL2-Linux-Kernel/arch/powerpc/mm/slb.c

339 строки
10 KiB
C

/*
* PowerPC64 SLB support.
*
* Copyright (C) 2004 David Gibson <dwg@au.ibm.com>, IBM
* Based on earlier code written by:
* Dave Engebretsen and Mike Corrigan {engebret|mikejc}@us.ibm.com
* Copyright (c) 2001 Dave Engebretsen
* Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM
*
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <asm/pgtable.h>
#include <asm/mmu.h>
#include <asm/mmu_context.h>
#include <asm/paca.h>
#include <asm/cputable.h>
#include <asm/cacheflush.h>
#include <asm/smp.h>
#include <asm/firmware.h>
#include <linux/compiler.h>
#include <asm/udbg.h>
extern void slb_allocate_realmode(unsigned long ea);
extern void slb_allocate_user(unsigned long ea);
static void slb_allocate(unsigned long ea)
{
/* Currently, we do real mode for all SLBs including user, but
* that will change if we bring back dynamic VSIDs
*/
slb_allocate_realmode(ea);
}
#define slb_esid_mask(ssize) \
(((ssize) == MMU_SEGSIZE_256M)? ESID_MASK: ESID_MASK_1T)
static inline unsigned long mk_esid_data(unsigned long ea, int ssize,
unsigned long slot)
{
return (ea & slb_esid_mask(ssize)) | SLB_ESID_V | slot;
}
#define slb_vsid_shift(ssize) \
((ssize) == MMU_SEGSIZE_256M? SLB_VSID_SHIFT: SLB_VSID_SHIFT_1T)
static inline unsigned long mk_vsid_data(unsigned long ea, int ssize,
unsigned long flags)
{
return (get_kernel_vsid(ea, ssize) << slb_vsid_shift(ssize)) | flags |
((unsigned long) ssize << SLB_VSID_SSIZE_SHIFT);
}
static inline void slb_shadow_update(unsigned long ea, int ssize,
unsigned long flags,
unsigned long entry)
{
/*
* Clear the ESID first so the entry is not valid while we are
* updating it. No write barriers are needed here, provided
* we only update the current CPU's SLB shadow buffer.
*/
get_slb_shadow()->save_area[entry].esid = 0;
get_slb_shadow()->save_area[entry].vsid = mk_vsid_data(ea, ssize, flags);
get_slb_shadow()->save_area[entry].esid = mk_esid_data(ea, ssize, entry);
}
static inline void slb_shadow_clear(unsigned long entry)
{
get_slb_shadow()->save_area[entry].esid = 0;
}
static inline void create_shadowed_slbe(unsigned long ea, int ssize,
unsigned long flags,
unsigned long entry)
{
/*
* Updating the shadow buffer before writing the SLB ensures
* we don't get a stale entry here if we get preempted by PHYP
* between these two statements.
*/
slb_shadow_update(ea, ssize, flags, entry);
asm volatile("slbmte %0,%1" :
: "r" (mk_vsid_data(ea, ssize, flags)),
"r" (mk_esid_data(ea, ssize, entry))
: "memory" );
}
static void __slb_flush_and_rebolt(void)
{
/* If you change this make sure you change SLB_NUM_BOLTED
* appropriately too. */
unsigned long linear_llp, vmalloc_llp, lflags, vflags;
unsigned long ksp_esid_data, ksp_vsid_data;
linear_llp = mmu_psize_defs[mmu_linear_psize].sllp;
vmalloc_llp = mmu_psize_defs[mmu_vmalloc_psize].sllp;
lflags = SLB_VSID_KERNEL | linear_llp;
vflags = SLB_VSID_KERNEL | vmalloc_llp;
ksp_esid_data = mk_esid_data(get_paca()->kstack, mmu_kernel_ssize, 2);
if ((ksp_esid_data & ~0xfffffffUL) <= PAGE_OFFSET) {
ksp_esid_data &= ~SLB_ESID_V;
ksp_vsid_data = 0;
slb_shadow_clear(2);
} else {
/* Update stack entry; others don't change */
slb_shadow_update(get_paca()->kstack, mmu_kernel_ssize, lflags, 2);
ksp_vsid_data = get_slb_shadow()->save_area[2].vsid;
}
/* We need to do this all in asm, so we're sure we don't touch
* the stack between the slbia and rebolting it. */
asm volatile("isync\n"
"slbia\n"
/* Slot 1 - first VMALLOC segment */
"slbmte %0,%1\n"
/* Slot 2 - kernel stack */
"slbmte %2,%3\n"
"isync"
:: "r"(mk_vsid_data(VMALLOC_START, mmu_kernel_ssize, vflags)),
"r"(mk_esid_data(VMALLOC_START, mmu_kernel_ssize, 1)),
"r"(ksp_vsid_data),
"r"(ksp_esid_data)
: "memory");
}
void slb_flush_and_rebolt(void)
{
WARN_ON(!irqs_disabled());
/*
* We can't take a PMU exception in the following code, so hard
* disable interrupts.
*/
hard_irq_disable();
__slb_flush_and_rebolt();
get_paca()->slb_cache_ptr = 0;
}
void slb_vmalloc_update(void)
{
unsigned long vflags;
vflags = SLB_VSID_KERNEL | mmu_psize_defs[mmu_vmalloc_psize].sllp;
slb_shadow_update(VMALLOC_START, mmu_kernel_ssize, vflags, 1);
slb_flush_and_rebolt();
}
/* Helper function to compare esids. There are four cases to handle.
* 1. The system is not 1T segment size capable. Use the GET_ESID compare.
* 2. The system is 1T capable, both addresses are < 1T, use the GET_ESID compare.
* 3. The system is 1T capable, only one of the two addresses is > 1T. This is not a match.
* 4. The system is 1T capable, both addresses are > 1T, use the GET_ESID_1T macro to compare.
*/
static inline int esids_match(unsigned long addr1, unsigned long addr2)
{
int esid_1t_count;
/* System is not 1T segment size capable. */
if (!cpu_has_feature(CPU_FTR_1T_SEGMENT))
return (GET_ESID(addr1) == GET_ESID(addr2));
esid_1t_count = (((addr1 >> SID_SHIFT_1T) != 0) +
((addr2 >> SID_SHIFT_1T) != 0));
/* both addresses are < 1T */
if (esid_1t_count == 0)
return (GET_ESID(addr1) == GET_ESID(addr2));
/* One address < 1T, the other > 1T. Not a match */
if (esid_1t_count == 1)
return 0;
/* Both addresses are > 1T. */
return (GET_ESID_1T(addr1) == GET_ESID_1T(addr2));
}
/* Flush all user entries from the segment table of the current processor. */
void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
{
unsigned long offset;
unsigned long slbie_data = 0;
unsigned long pc = KSTK_EIP(tsk);
unsigned long stack = KSTK_ESP(tsk);
unsigned long exec_base;
/*
* We need interrupts hard-disabled here, not just soft-disabled,
* so that a PMU interrupt can't occur, which might try to access
* user memory (to get a stack trace) and possible cause an SLB miss
* which would update the slb_cache/slb_cache_ptr fields in the PACA.
*/
hard_irq_disable();
offset = get_paca()->slb_cache_ptr;
if (!cpu_has_feature(CPU_FTR_NO_SLBIE_B) &&
offset <= SLB_CACHE_ENTRIES) {
int i;
asm volatile("isync" : : : "memory");
for (i = 0; i < offset; i++) {
slbie_data = (unsigned long)get_paca()->slb_cache[i]
<< SID_SHIFT; /* EA */
slbie_data |= user_segment_size(slbie_data)
<< SLBIE_SSIZE_SHIFT;
slbie_data |= SLBIE_C; /* C set for user addresses */
asm volatile("slbie %0" : : "r" (slbie_data));
}
asm volatile("isync" : : : "memory");
} else {
__slb_flush_and_rebolt();
}
/* Workaround POWER5 < DD2.1 issue */
if (offset == 1 || offset > SLB_CACHE_ENTRIES)
asm volatile("slbie %0" : : "r" (slbie_data));
get_paca()->slb_cache_ptr = 0;
get_paca()->context = mm->context;
/*
* preload some userspace segments into the SLB.
* Almost all 32 and 64bit PowerPC executables are linked at
* 0x10000000 so it makes sense to preload this segment.
*/
exec_base = 0x10000000;
if (is_kernel_addr(pc) || is_kernel_addr(stack) ||
is_kernel_addr(exec_base))
return;
slb_allocate(pc);
if (!esids_match(pc, stack))
slb_allocate(stack);
if (!esids_match(pc, exec_base) &&
!esids_match(stack, exec_base))
slb_allocate(exec_base);
}
static inline void patch_slb_encoding(unsigned int *insn_addr,
unsigned int immed)
{
*insn_addr = (*insn_addr & 0xffff0000) | immed;
flush_icache_range((unsigned long)insn_addr, 4+
(unsigned long)insn_addr);
}
void slb_set_size(u16 size)
{
extern unsigned int *slb_compare_rr_to_size;
if (mmu_slb_size == size)
return;
mmu_slb_size = size;
patch_slb_encoding(slb_compare_rr_to_size, mmu_slb_size);
}
void slb_initialize(void)
{
unsigned long linear_llp, vmalloc_llp, io_llp;
unsigned long lflags, vflags;
static int slb_encoding_inited;
extern unsigned int *slb_miss_kernel_load_linear;
extern unsigned int *slb_miss_kernel_load_io;
extern unsigned int *slb_compare_rr_to_size;
#ifdef CONFIG_SPARSEMEM_VMEMMAP
extern unsigned int *slb_miss_kernel_load_vmemmap;
unsigned long vmemmap_llp;
#endif
/* Prepare our SLB miss handler based on our page size */
linear_llp = mmu_psize_defs[mmu_linear_psize].sllp;
io_llp = mmu_psize_defs[mmu_io_psize].sllp;
vmalloc_llp = mmu_psize_defs[mmu_vmalloc_psize].sllp;
get_paca()->vmalloc_sllp = SLB_VSID_KERNEL | vmalloc_llp;
#ifdef CONFIG_SPARSEMEM_VMEMMAP
vmemmap_llp = mmu_psize_defs[mmu_vmemmap_psize].sllp;
#endif
if (!slb_encoding_inited) {
slb_encoding_inited = 1;
patch_slb_encoding(slb_miss_kernel_load_linear,
SLB_VSID_KERNEL | linear_llp);
patch_slb_encoding(slb_miss_kernel_load_io,
SLB_VSID_KERNEL | io_llp);
patch_slb_encoding(slb_compare_rr_to_size,
mmu_slb_size);
pr_devel("SLB: linear LLP = %04lx\n", linear_llp);
pr_devel("SLB: io LLP = %04lx\n", io_llp);
#ifdef CONFIG_SPARSEMEM_VMEMMAP
patch_slb_encoding(slb_miss_kernel_load_vmemmap,
SLB_VSID_KERNEL | vmemmap_llp);
pr_devel("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
#endif
}
get_paca()->stab_rr = SLB_NUM_BOLTED;
/* On iSeries the bolted entries have already been set up by
* the hypervisor from the lparMap data in head.S */
if (firmware_has_feature(FW_FEATURE_ISERIES))
return;
lflags = SLB_VSID_KERNEL | linear_llp;
vflags = SLB_VSID_KERNEL | vmalloc_llp;
/* Invalidate the entire SLB (even slot 0) & all the ERATS */
asm volatile("isync":::"memory");
asm volatile("slbmte %0,%0"::"r" (0) : "memory");
asm volatile("isync; slbia; isync":::"memory");
create_shadowed_slbe(PAGE_OFFSET, mmu_kernel_ssize, lflags, 0);
create_shadowed_slbe(VMALLOC_START, mmu_kernel_ssize, vflags, 1);
/* For the boot cpu, we're running on the stack in init_thread_union,
* which is in the first segment of the linear mapping, and also
* get_paca()->kstack hasn't been initialized yet.
* For secondary cpus, we need to bolt the kernel stack entry now.
*/
slb_shadow_clear(2);
if (raw_smp_processor_id() != boot_cpuid &&
(get_paca()->kstack & slb_esid_mask(mmu_kernel_ssize)) > PAGE_OFFSET)
create_shadowed_slbe(get_paca()->kstack,
mmu_kernel_ssize, lflags, 2);
asm volatile("isync":::"memory");
}