333 строки
8.2 KiB
C
333 строки
8.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Altera Passive Serial SPI Driver
|
|
*
|
|
* Copyright (c) 2017 United Western Technologies, Corporation
|
|
*
|
|
* Joshua Clayton <stillcompiling@gmail.com>
|
|
*
|
|
* Manage Altera FPGA firmware that is loaded over SPI using the passive
|
|
* serial configuration method.
|
|
* Firmware must be in binary "rbf" format.
|
|
* Works on Arria 10, Cyclone V and Stratix V. Should work on Cyclone series.
|
|
* May work on other Altera FPGAs.
|
|
*/
|
|
|
|
#include <linux/bitrev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/fpga/fpga-mgr.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/sizes.h>
|
|
|
|
enum altera_ps_devtype {
|
|
CYCLONE5,
|
|
ARRIA10,
|
|
};
|
|
|
|
struct altera_ps_data {
|
|
enum altera_ps_devtype devtype;
|
|
int status_wait_min_us;
|
|
int status_wait_max_us;
|
|
int t_cfg_us;
|
|
int t_st2ck_us;
|
|
};
|
|
|
|
struct altera_ps_conf {
|
|
struct gpio_desc *config;
|
|
struct gpio_desc *confd;
|
|
struct gpio_desc *status;
|
|
struct spi_device *spi;
|
|
const struct altera_ps_data *data;
|
|
u32 info_flags;
|
|
char mgr_name[64];
|
|
};
|
|
|
|
/* | Arria 10 | Cyclone5 | Stratix5 |
|
|
* t_CF2ST0 | [; 600] | [; 600] | [; 600] |ns
|
|
* t_CFG | [2;] | [2;] | [2;] |µs
|
|
* t_STATUS | [268; 3000] | [268; 1506] | [268; 1506] |µs
|
|
* t_CF2ST1 | [; 3000] | [; 1506] | [; 1506] |µs
|
|
* t_CF2CK | [3010;] | [1506;] | [1506;] |µs
|
|
* t_ST2CK | [10;] | [2;] | [2;] |µs
|
|
* t_CD2UM | [175; 830] | [175; 437] | [175; 437] |µs
|
|
*/
|
|
static struct altera_ps_data c5_data = {
|
|
/* these values for Cyclone5 are compatible with Stratix5 */
|
|
.devtype = CYCLONE5,
|
|
.status_wait_min_us = 268,
|
|
.status_wait_max_us = 1506,
|
|
.t_cfg_us = 2,
|
|
.t_st2ck_us = 2,
|
|
};
|
|
|
|
static struct altera_ps_data a10_data = {
|
|
.devtype = ARRIA10,
|
|
.status_wait_min_us = 268, /* min(t_STATUS) */
|
|
.status_wait_max_us = 3000, /* max(t_CF2ST1) */
|
|
.t_cfg_us = 2, /* max { min(t_CFG), max(tCF2ST0) } */
|
|
.t_st2ck_us = 10, /* min(t_ST2CK) */
|
|
};
|
|
|
|
/* Array index is enum altera_ps_devtype */
|
|
static const struct altera_ps_data *altera_ps_data_map[] = {
|
|
&c5_data,
|
|
&a10_data,
|
|
};
|
|
|
|
static const struct of_device_id of_ef_match[] = {
|
|
{ .compatible = "altr,fpga-passive-serial", .data = &c5_data },
|
|
{ .compatible = "altr,fpga-arria10-passive-serial", .data = &a10_data },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, of_ef_match);
|
|
|
|
static enum fpga_mgr_states altera_ps_state(struct fpga_manager *mgr)
|
|
{
|
|
struct altera_ps_conf *conf = mgr->priv;
|
|
|
|
if (gpiod_get_value_cansleep(conf->status))
|
|
return FPGA_MGR_STATE_RESET;
|
|
|
|
return FPGA_MGR_STATE_UNKNOWN;
|
|
}
|
|
|
|
static inline void altera_ps_delay(int delay_us)
|
|
{
|
|
if (delay_us > 10)
|
|
usleep_range(delay_us, delay_us + 5);
|
|
else
|
|
udelay(delay_us);
|
|
}
|
|
|
|
static int altera_ps_write_init(struct fpga_manager *mgr,
|
|
struct fpga_image_info *info,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct altera_ps_conf *conf = mgr->priv;
|
|
int min, max, waits;
|
|
int i;
|
|
|
|
conf->info_flags = info->flags;
|
|
|
|
if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
|
|
dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
gpiod_set_value_cansleep(conf->config, 1);
|
|
|
|
/* wait min reset pulse time */
|
|
altera_ps_delay(conf->data->t_cfg_us);
|
|
|
|
if (!gpiod_get_value_cansleep(conf->status)) {
|
|
dev_err(&mgr->dev, "Status pin failed to show a reset\n");
|
|
return -EIO;
|
|
}
|
|
|
|
gpiod_set_value_cansleep(conf->config, 0);
|
|
|
|
min = conf->data->status_wait_min_us;
|
|
max = conf->data->status_wait_max_us;
|
|
waits = max / min;
|
|
if (max % min)
|
|
waits++;
|
|
|
|
/* wait for max { max(t_STATUS), max(t_CF2ST1) } */
|
|
for (i = 0; i < waits; i++) {
|
|
usleep_range(min, min + 10);
|
|
if (!gpiod_get_value_cansleep(conf->status)) {
|
|
/* wait for min(t_ST2CK)*/
|
|
altera_ps_delay(conf->data->t_st2ck_us);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
dev_err(&mgr->dev, "Status pin not ready.\n");
|
|
return -EIO;
|
|
}
|
|
|
|
static void rev_buf(char *buf, size_t len)
|
|
{
|
|
u32 *fw32 = (u32 *)buf;
|
|
size_t extra_bytes = (len & 0x03);
|
|
const u32 *fw_end = (u32 *)(buf + len - extra_bytes);
|
|
|
|
/* set buffer to lsb first */
|
|
while (fw32 < fw_end) {
|
|
*fw32 = bitrev8x4(*fw32);
|
|
fw32++;
|
|
}
|
|
|
|
if (extra_bytes) {
|
|
buf = (char *)fw_end;
|
|
while (extra_bytes) {
|
|
*buf = bitrev8(*buf);
|
|
buf++;
|
|
extra_bytes--;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int altera_ps_write(struct fpga_manager *mgr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct altera_ps_conf *conf = mgr->priv;
|
|
const char *fw_data = buf;
|
|
const char *fw_data_end = fw_data + count;
|
|
|
|
while (fw_data < fw_data_end) {
|
|
int ret;
|
|
size_t stride = min_t(size_t, fw_data_end - fw_data, SZ_4K);
|
|
|
|
if (!(conf->info_flags & FPGA_MGR_BITSTREAM_LSB_FIRST))
|
|
rev_buf((char *)fw_data, stride);
|
|
|
|
ret = spi_write(conf->spi, fw_data, stride);
|
|
if (ret) {
|
|
dev_err(&mgr->dev, "spi error in firmware write: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
fw_data += stride;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int altera_ps_write_complete(struct fpga_manager *mgr,
|
|
struct fpga_image_info *info)
|
|
{
|
|
struct altera_ps_conf *conf = mgr->priv;
|
|
static const char dummy[] = {0};
|
|
int ret;
|
|
|
|
if (gpiod_get_value_cansleep(conf->status)) {
|
|
dev_err(&mgr->dev, "Error during configuration.\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (conf->confd) {
|
|
if (!gpiod_get_raw_value_cansleep(conf->confd)) {
|
|
dev_err(&mgr->dev, "CONF_DONE is inactive!\n");
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* After CONF_DONE goes high, send two additional falling edges on DCLK
|
|
* to begin initialization and enter user mode
|
|
*/
|
|
ret = spi_write(conf->spi, dummy, 1);
|
|
if (ret) {
|
|
dev_err(&mgr->dev, "spi error during end sequence: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct fpga_manager_ops altera_ps_ops = {
|
|
.state = altera_ps_state,
|
|
.write_init = altera_ps_write_init,
|
|
.write = altera_ps_write,
|
|
.write_complete = altera_ps_write_complete,
|
|
};
|
|
|
|
static const struct altera_ps_data *id_to_data(const struct spi_device_id *id)
|
|
{
|
|
kernel_ulong_t devtype = id->driver_data;
|
|
const struct altera_ps_data *data;
|
|
|
|
/* someone added a altera_ps_devtype without adding to the map array */
|
|
if (devtype >= ARRAY_SIZE(altera_ps_data_map))
|
|
return NULL;
|
|
|
|
data = altera_ps_data_map[devtype];
|
|
if (!data || data->devtype != devtype)
|
|
return NULL;
|
|
|
|
return data;
|
|
}
|
|
|
|
static int altera_ps_probe(struct spi_device *spi)
|
|
{
|
|
struct altera_ps_conf *conf;
|
|
const struct of_device_id *of_id;
|
|
struct fpga_manager *mgr;
|
|
|
|
conf = devm_kzalloc(&spi->dev, sizeof(*conf), GFP_KERNEL);
|
|
if (!conf)
|
|
return -ENOMEM;
|
|
|
|
if (spi->dev.of_node) {
|
|
of_id = of_match_device(of_ef_match, &spi->dev);
|
|
if (!of_id)
|
|
return -ENODEV;
|
|
conf->data = of_id->data;
|
|
} else {
|
|
conf->data = id_to_data(spi_get_device_id(spi));
|
|
if (!conf->data)
|
|
return -ENODEV;
|
|
}
|
|
|
|
conf->spi = spi;
|
|
conf->config = devm_gpiod_get(&spi->dev, "nconfig", GPIOD_OUT_LOW);
|
|
if (IS_ERR(conf->config)) {
|
|
dev_err(&spi->dev, "Failed to get config gpio: %ld\n",
|
|
PTR_ERR(conf->config));
|
|
return PTR_ERR(conf->config);
|
|
}
|
|
|
|
conf->status = devm_gpiod_get(&spi->dev, "nstat", GPIOD_IN);
|
|
if (IS_ERR(conf->status)) {
|
|
dev_err(&spi->dev, "Failed to get status gpio: %ld\n",
|
|
PTR_ERR(conf->status));
|
|
return PTR_ERR(conf->status);
|
|
}
|
|
|
|
conf->confd = devm_gpiod_get_optional(&spi->dev, "confd", GPIOD_IN);
|
|
if (IS_ERR(conf->confd)) {
|
|
dev_err(&spi->dev, "Failed to get confd gpio: %ld\n",
|
|
PTR_ERR(conf->confd));
|
|
return PTR_ERR(conf->confd);
|
|
} else if (!conf->confd) {
|
|
dev_warn(&spi->dev, "Not using confd gpio");
|
|
}
|
|
|
|
/* Register manager with unique name */
|
|
snprintf(conf->mgr_name, sizeof(conf->mgr_name), "%s %s",
|
|
dev_driver_string(&spi->dev), dev_name(&spi->dev));
|
|
|
|
mgr = devm_fpga_mgr_register(&spi->dev, conf->mgr_name,
|
|
&altera_ps_ops, conf);
|
|
return PTR_ERR_OR_ZERO(mgr);
|
|
}
|
|
|
|
static const struct spi_device_id altera_ps_spi_ids[] = {
|
|
{ "cyclone-ps-spi", CYCLONE5 },
|
|
{ "fpga-passive-serial", CYCLONE5 },
|
|
{ "fpga-arria10-passive-serial", ARRIA10 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, altera_ps_spi_ids);
|
|
|
|
static struct spi_driver altera_ps_driver = {
|
|
.driver = {
|
|
.name = "altera-ps-spi",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = of_match_ptr(of_ef_match),
|
|
},
|
|
.id_table = altera_ps_spi_ids,
|
|
.probe = altera_ps_probe,
|
|
};
|
|
|
|
module_spi_driver(altera_ps_driver)
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Joshua Clayton <stillcompiling@gmail.com>");
|
|
MODULE_DESCRIPTION("Module to load Altera FPGA firmware over SPI");
|