1058 строки
27 KiB
C
1058 строки
27 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/dma/qcom-gpi-dma.h>
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/soc/qcom/geni-se.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#define SE_I2C_TX_TRANS_LEN 0x26c
|
|
#define SE_I2C_RX_TRANS_LEN 0x270
|
|
#define SE_I2C_SCL_COUNTERS 0x278
|
|
|
|
#define SE_I2C_ERR (M_CMD_OVERRUN_EN | M_ILLEGAL_CMD_EN | M_CMD_FAILURE_EN |\
|
|
M_GP_IRQ_1_EN | M_GP_IRQ_3_EN | M_GP_IRQ_4_EN)
|
|
#define SE_I2C_ABORT BIT(1)
|
|
|
|
/* M_CMD OP codes for I2C */
|
|
#define I2C_WRITE 0x1
|
|
#define I2C_READ 0x2
|
|
#define I2C_WRITE_READ 0x3
|
|
#define I2C_ADDR_ONLY 0x4
|
|
#define I2C_BUS_CLEAR 0x6
|
|
#define I2C_STOP_ON_BUS 0x7
|
|
/* M_CMD params for I2C */
|
|
#define PRE_CMD_DELAY BIT(0)
|
|
#define TIMESTAMP_BEFORE BIT(1)
|
|
#define STOP_STRETCH BIT(2)
|
|
#define TIMESTAMP_AFTER BIT(3)
|
|
#define POST_COMMAND_DELAY BIT(4)
|
|
#define IGNORE_ADD_NACK BIT(6)
|
|
#define READ_FINISHED_WITH_ACK BIT(7)
|
|
#define BYPASS_ADDR_PHASE BIT(8)
|
|
#define SLV_ADDR_MSK GENMASK(15, 9)
|
|
#define SLV_ADDR_SHFT 9
|
|
/* I2C SCL COUNTER fields */
|
|
#define HIGH_COUNTER_MSK GENMASK(29, 20)
|
|
#define HIGH_COUNTER_SHFT 20
|
|
#define LOW_COUNTER_MSK GENMASK(19, 10)
|
|
#define LOW_COUNTER_SHFT 10
|
|
#define CYCLE_COUNTER_MSK GENMASK(9, 0)
|
|
|
|
#define I2C_PACK_TX BIT(0)
|
|
#define I2C_PACK_RX BIT(1)
|
|
|
|
enum geni_i2c_err_code {
|
|
GP_IRQ0,
|
|
NACK,
|
|
GP_IRQ2,
|
|
BUS_PROTO,
|
|
ARB_LOST,
|
|
GP_IRQ5,
|
|
GENI_OVERRUN,
|
|
GENI_ILLEGAL_CMD,
|
|
GENI_ABORT_DONE,
|
|
GENI_TIMEOUT,
|
|
};
|
|
|
|
#define DM_I2C_CB_ERR ((BIT(NACK) | BIT(BUS_PROTO) | BIT(ARB_LOST)) \
|
|
<< 5)
|
|
|
|
#define I2C_AUTO_SUSPEND_DELAY 250
|
|
#define KHZ(freq) (1000 * freq)
|
|
#define PACKING_BYTES_PW 4
|
|
|
|
#define ABORT_TIMEOUT HZ
|
|
#define XFER_TIMEOUT HZ
|
|
#define RST_TIMEOUT HZ
|
|
|
|
struct geni_i2c_dev {
|
|
struct geni_se se;
|
|
u32 tx_wm;
|
|
int irq;
|
|
int err;
|
|
struct i2c_adapter adap;
|
|
struct completion done;
|
|
struct i2c_msg *cur;
|
|
int cur_wr;
|
|
int cur_rd;
|
|
spinlock_t lock;
|
|
struct clk *core_clk;
|
|
u32 clk_freq_out;
|
|
const struct geni_i2c_clk_fld *clk_fld;
|
|
int suspended;
|
|
void *dma_buf;
|
|
size_t xfer_len;
|
|
dma_addr_t dma_addr;
|
|
struct dma_chan *tx_c;
|
|
struct dma_chan *rx_c;
|
|
bool gpi_mode;
|
|
bool abort_done;
|
|
};
|
|
|
|
struct geni_i2c_desc {
|
|
bool has_core_clk;
|
|
char *icc_ddr;
|
|
bool no_dma_support;
|
|
unsigned int tx_fifo_depth;
|
|
};
|
|
|
|
struct geni_i2c_err_log {
|
|
int err;
|
|
const char *msg;
|
|
};
|
|
|
|
static const struct geni_i2c_err_log gi2c_log[] = {
|
|
[GP_IRQ0] = {-EIO, "Unknown I2C err GP_IRQ0"},
|
|
[NACK] = {-ENXIO, "NACK: slv unresponsive, check its power/reset-ln"},
|
|
[GP_IRQ2] = {-EIO, "Unknown I2C err GP IRQ2"},
|
|
[BUS_PROTO] = {-EPROTO, "Bus proto err, noisy/unexpected start/stop"},
|
|
[ARB_LOST] = {-EAGAIN, "Bus arbitration lost, clock line undriveable"},
|
|
[GP_IRQ5] = {-EIO, "Unknown I2C err GP IRQ5"},
|
|
[GENI_OVERRUN] = {-EIO, "Cmd overrun, check GENI cmd-state machine"},
|
|
[GENI_ILLEGAL_CMD] = {-EIO, "Illegal cmd, check GENI cmd-state machine"},
|
|
[GENI_ABORT_DONE] = {-ETIMEDOUT, "Abort after timeout successful"},
|
|
[GENI_TIMEOUT] = {-ETIMEDOUT, "I2C TXN timed out"},
|
|
};
|
|
|
|
struct geni_i2c_clk_fld {
|
|
u32 clk_freq_out;
|
|
u8 clk_div;
|
|
u8 t_high_cnt;
|
|
u8 t_low_cnt;
|
|
u8 t_cycle_cnt;
|
|
};
|
|
|
|
/*
|
|
* Hardware uses the underlying formula to calculate time periods of
|
|
* SCL clock cycle. Firmware uses some additional cycles excluded from the
|
|
* below formula and it is confirmed that the time periods are within
|
|
* specification limits.
|
|
*
|
|
* time of high period of SCL: t_high = (t_high_cnt * clk_div) / source_clock
|
|
* time of low period of SCL: t_low = (t_low_cnt * clk_div) / source_clock
|
|
* time of full period of SCL: t_cycle = (t_cycle_cnt * clk_div) / source_clock
|
|
* clk_freq_out = t / t_cycle
|
|
* source_clock = 19.2 MHz
|
|
*/
|
|
static const struct geni_i2c_clk_fld geni_i2c_clk_map[] = {
|
|
{KHZ(100), 7, 10, 11, 26},
|
|
{KHZ(400), 2, 5, 12, 24},
|
|
{KHZ(1000), 1, 3, 9, 18},
|
|
};
|
|
|
|
static int geni_i2c_clk_map_idx(struct geni_i2c_dev *gi2c)
|
|
{
|
|
int i;
|
|
const struct geni_i2c_clk_fld *itr = geni_i2c_clk_map;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(geni_i2c_clk_map); i++, itr++) {
|
|
if (itr->clk_freq_out == gi2c->clk_freq_out) {
|
|
gi2c->clk_fld = itr;
|
|
return 0;
|
|
}
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void qcom_geni_i2c_conf(struct geni_i2c_dev *gi2c)
|
|
{
|
|
const struct geni_i2c_clk_fld *itr = gi2c->clk_fld;
|
|
u32 val;
|
|
|
|
writel_relaxed(0, gi2c->se.base + SE_GENI_CLK_SEL);
|
|
|
|
val = (itr->clk_div << CLK_DIV_SHFT) | SER_CLK_EN;
|
|
writel_relaxed(val, gi2c->se.base + GENI_SER_M_CLK_CFG);
|
|
|
|
val = itr->t_high_cnt << HIGH_COUNTER_SHFT;
|
|
val |= itr->t_low_cnt << LOW_COUNTER_SHFT;
|
|
val |= itr->t_cycle_cnt;
|
|
writel_relaxed(val, gi2c->se.base + SE_I2C_SCL_COUNTERS);
|
|
}
|
|
|
|
static void geni_i2c_err_misc(struct geni_i2c_dev *gi2c)
|
|
{
|
|
u32 m_cmd = readl_relaxed(gi2c->se.base + SE_GENI_M_CMD0);
|
|
u32 m_stat = readl_relaxed(gi2c->se.base + SE_GENI_M_IRQ_STATUS);
|
|
u32 geni_s = readl_relaxed(gi2c->se.base + SE_GENI_STATUS);
|
|
u32 geni_ios = readl_relaxed(gi2c->se.base + SE_GENI_IOS);
|
|
u32 dma = readl_relaxed(gi2c->se.base + SE_GENI_DMA_MODE_EN);
|
|
u32 rx_st, tx_st;
|
|
|
|
if (dma) {
|
|
rx_st = readl_relaxed(gi2c->se.base + SE_DMA_RX_IRQ_STAT);
|
|
tx_st = readl_relaxed(gi2c->se.base + SE_DMA_TX_IRQ_STAT);
|
|
} else {
|
|
rx_st = readl_relaxed(gi2c->se.base + SE_GENI_RX_FIFO_STATUS);
|
|
tx_st = readl_relaxed(gi2c->se.base + SE_GENI_TX_FIFO_STATUS);
|
|
}
|
|
dev_dbg(gi2c->se.dev, "DMA:%d tx_stat:0x%x, rx_stat:0x%x, irq-stat:0x%x\n",
|
|
dma, tx_st, rx_st, m_stat);
|
|
dev_dbg(gi2c->se.dev, "m_cmd:0x%x, geni_status:0x%x, geni_ios:0x%x\n",
|
|
m_cmd, geni_s, geni_ios);
|
|
}
|
|
|
|
static void geni_i2c_err(struct geni_i2c_dev *gi2c, int err)
|
|
{
|
|
if (!gi2c->err)
|
|
gi2c->err = gi2c_log[err].err;
|
|
if (gi2c->cur)
|
|
dev_dbg(gi2c->se.dev, "len:%d, slv-addr:0x%x, RD/WR:%d\n",
|
|
gi2c->cur->len, gi2c->cur->addr, gi2c->cur->flags);
|
|
|
|
switch (err) {
|
|
case GENI_ABORT_DONE:
|
|
gi2c->abort_done = true;
|
|
break;
|
|
case NACK:
|
|
case GENI_TIMEOUT:
|
|
dev_dbg(gi2c->se.dev, "%s\n", gi2c_log[err].msg);
|
|
break;
|
|
default:
|
|
dev_err(gi2c->se.dev, "%s\n", gi2c_log[err].msg);
|
|
geni_i2c_err_misc(gi2c);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static irqreturn_t geni_i2c_irq(int irq, void *dev)
|
|
{
|
|
struct geni_i2c_dev *gi2c = dev;
|
|
void __iomem *base = gi2c->se.base;
|
|
int j, p;
|
|
u32 m_stat;
|
|
u32 rx_st;
|
|
u32 dm_tx_st;
|
|
u32 dm_rx_st;
|
|
u32 dma;
|
|
u32 val;
|
|
struct i2c_msg *cur;
|
|
|
|
spin_lock(&gi2c->lock);
|
|
m_stat = readl_relaxed(base + SE_GENI_M_IRQ_STATUS);
|
|
rx_st = readl_relaxed(base + SE_GENI_RX_FIFO_STATUS);
|
|
dm_tx_st = readl_relaxed(base + SE_DMA_TX_IRQ_STAT);
|
|
dm_rx_st = readl_relaxed(base + SE_DMA_RX_IRQ_STAT);
|
|
dma = readl_relaxed(base + SE_GENI_DMA_MODE_EN);
|
|
cur = gi2c->cur;
|
|
|
|
if (!cur ||
|
|
m_stat & (M_CMD_FAILURE_EN | M_CMD_ABORT_EN) ||
|
|
dm_rx_st & (DM_I2C_CB_ERR)) {
|
|
if (m_stat & M_GP_IRQ_1_EN)
|
|
geni_i2c_err(gi2c, NACK);
|
|
if (m_stat & M_GP_IRQ_3_EN)
|
|
geni_i2c_err(gi2c, BUS_PROTO);
|
|
if (m_stat & M_GP_IRQ_4_EN)
|
|
geni_i2c_err(gi2c, ARB_LOST);
|
|
if (m_stat & M_CMD_OVERRUN_EN)
|
|
geni_i2c_err(gi2c, GENI_OVERRUN);
|
|
if (m_stat & M_ILLEGAL_CMD_EN)
|
|
geni_i2c_err(gi2c, GENI_ILLEGAL_CMD);
|
|
if (m_stat & M_CMD_ABORT_EN)
|
|
geni_i2c_err(gi2c, GENI_ABORT_DONE);
|
|
if (m_stat & M_GP_IRQ_0_EN)
|
|
geni_i2c_err(gi2c, GP_IRQ0);
|
|
|
|
/* Disable the TX Watermark interrupt to stop TX */
|
|
if (!dma)
|
|
writel_relaxed(0, base + SE_GENI_TX_WATERMARK_REG);
|
|
} else if (dma) {
|
|
dev_dbg(gi2c->se.dev, "i2c dma tx:0x%x, dma rx:0x%x\n",
|
|
dm_tx_st, dm_rx_st);
|
|
} else if (cur->flags & I2C_M_RD &&
|
|
m_stat & (M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN)) {
|
|
u32 rxcnt = rx_st & RX_FIFO_WC_MSK;
|
|
|
|
for (j = 0; j < rxcnt; j++) {
|
|
p = 0;
|
|
val = readl_relaxed(base + SE_GENI_RX_FIFOn);
|
|
while (gi2c->cur_rd < cur->len && p < sizeof(val)) {
|
|
cur->buf[gi2c->cur_rd++] = val & 0xff;
|
|
val >>= 8;
|
|
p++;
|
|
}
|
|
if (gi2c->cur_rd == cur->len)
|
|
break;
|
|
}
|
|
} else if (!(cur->flags & I2C_M_RD) &&
|
|
m_stat & M_TX_FIFO_WATERMARK_EN) {
|
|
for (j = 0; j < gi2c->tx_wm; j++) {
|
|
u32 temp;
|
|
|
|
val = 0;
|
|
p = 0;
|
|
while (gi2c->cur_wr < cur->len && p < sizeof(val)) {
|
|
temp = cur->buf[gi2c->cur_wr++];
|
|
val |= temp << (p * 8);
|
|
p++;
|
|
}
|
|
writel_relaxed(val, base + SE_GENI_TX_FIFOn);
|
|
/* TX Complete, Disable the TX Watermark interrupt */
|
|
if (gi2c->cur_wr == cur->len) {
|
|
writel_relaxed(0, base + SE_GENI_TX_WATERMARK_REG);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (m_stat)
|
|
writel_relaxed(m_stat, base + SE_GENI_M_IRQ_CLEAR);
|
|
|
|
if (dma && dm_tx_st)
|
|
writel_relaxed(dm_tx_st, base + SE_DMA_TX_IRQ_CLR);
|
|
if (dma && dm_rx_st)
|
|
writel_relaxed(dm_rx_st, base + SE_DMA_RX_IRQ_CLR);
|
|
|
|
/* if this is err with done-bit not set, handle that through timeout. */
|
|
if (m_stat & M_CMD_DONE_EN || m_stat & M_CMD_ABORT_EN ||
|
|
dm_tx_st & TX_DMA_DONE || dm_tx_st & TX_RESET_DONE ||
|
|
dm_rx_st & RX_DMA_DONE || dm_rx_st & RX_RESET_DONE)
|
|
complete(&gi2c->done);
|
|
|
|
spin_unlock(&gi2c->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void geni_i2c_abort_xfer(struct geni_i2c_dev *gi2c)
|
|
{
|
|
unsigned long time_left = ABORT_TIMEOUT;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&gi2c->lock, flags);
|
|
geni_i2c_err(gi2c, GENI_TIMEOUT);
|
|
gi2c->cur = NULL;
|
|
gi2c->abort_done = false;
|
|
geni_se_abort_m_cmd(&gi2c->se);
|
|
spin_unlock_irqrestore(&gi2c->lock, flags);
|
|
|
|
do {
|
|
time_left = wait_for_completion_timeout(&gi2c->done, time_left);
|
|
} while (!gi2c->abort_done && time_left);
|
|
|
|
if (!time_left)
|
|
dev_err(gi2c->se.dev, "Timeout abort_m_cmd\n");
|
|
}
|
|
|
|
static void geni_i2c_rx_fsm_rst(struct geni_i2c_dev *gi2c)
|
|
{
|
|
u32 val;
|
|
unsigned long time_left = RST_TIMEOUT;
|
|
|
|
writel_relaxed(1, gi2c->se.base + SE_DMA_RX_FSM_RST);
|
|
do {
|
|
time_left = wait_for_completion_timeout(&gi2c->done, time_left);
|
|
val = readl_relaxed(gi2c->se.base + SE_DMA_RX_IRQ_STAT);
|
|
} while (!(val & RX_RESET_DONE) && time_left);
|
|
|
|
if (!(val & RX_RESET_DONE))
|
|
dev_err(gi2c->se.dev, "Timeout resetting RX_FSM\n");
|
|
}
|
|
|
|
static void geni_i2c_tx_fsm_rst(struct geni_i2c_dev *gi2c)
|
|
{
|
|
u32 val;
|
|
unsigned long time_left = RST_TIMEOUT;
|
|
|
|
writel_relaxed(1, gi2c->se.base + SE_DMA_TX_FSM_RST);
|
|
do {
|
|
time_left = wait_for_completion_timeout(&gi2c->done, time_left);
|
|
val = readl_relaxed(gi2c->se.base + SE_DMA_TX_IRQ_STAT);
|
|
} while (!(val & TX_RESET_DONE) && time_left);
|
|
|
|
if (!(val & TX_RESET_DONE))
|
|
dev_err(gi2c->se.dev, "Timeout resetting TX_FSM\n");
|
|
}
|
|
|
|
static void geni_i2c_rx_msg_cleanup(struct geni_i2c_dev *gi2c,
|
|
struct i2c_msg *cur)
|
|
{
|
|
gi2c->cur_rd = 0;
|
|
if (gi2c->dma_buf) {
|
|
if (gi2c->err)
|
|
geni_i2c_rx_fsm_rst(gi2c);
|
|
geni_se_rx_dma_unprep(&gi2c->se, gi2c->dma_addr, gi2c->xfer_len);
|
|
i2c_put_dma_safe_msg_buf(gi2c->dma_buf, cur, !gi2c->err);
|
|
}
|
|
}
|
|
|
|
static void geni_i2c_tx_msg_cleanup(struct geni_i2c_dev *gi2c,
|
|
struct i2c_msg *cur)
|
|
{
|
|
gi2c->cur_wr = 0;
|
|
if (gi2c->dma_buf) {
|
|
if (gi2c->err)
|
|
geni_i2c_tx_fsm_rst(gi2c);
|
|
geni_se_tx_dma_unprep(&gi2c->se, gi2c->dma_addr, gi2c->xfer_len);
|
|
i2c_put_dma_safe_msg_buf(gi2c->dma_buf, cur, !gi2c->err);
|
|
}
|
|
}
|
|
|
|
static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
|
|
u32 m_param)
|
|
{
|
|
dma_addr_t rx_dma = 0;
|
|
unsigned long time_left;
|
|
void *dma_buf;
|
|
struct geni_se *se = &gi2c->se;
|
|
size_t len = msg->len;
|
|
struct i2c_msg *cur;
|
|
|
|
dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
|
|
if (dma_buf)
|
|
geni_se_select_mode(se, GENI_SE_DMA);
|
|
else
|
|
geni_se_select_mode(se, GENI_SE_FIFO);
|
|
|
|
writel_relaxed(len, se->base + SE_I2C_RX_TRANS_LEN);
|
|
geni_se_setup_m_cmd(se, I2C_READ, m_param);
|
|
|
|
if (dma_buf && geni_se_rx_dma_prep(se, dma_buf, len, &rx_dma)) {
|
|
geni_se_select_mode(se, GENI_SE_FIFO);
|
|
i2c_put_dma_safe_msg_buf(dma_buf, msg, false);
|
|
dma_buf = NULL;
|
|
} else {
|
|
gi2c->xfer_len = len;
|
|
gi2c->dma_addr = rx_dma;
|
|
gi2c->dma_buf = dma_buf;
|
|
}
|
|
|
|
cur = gi2c->cur;
|
|
time_left = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT);
|
|
if (!time_left)
|
|
geni_i2c_abort_xfer(gi2c);
|
|
|
|
geni_i2c_rx_msg_cleanup(gi2c, cur);
|
|
|
|
return gi2c->err;
|
|
}
|
|
|
|
static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
|
|
u32 m_param)
|
|
{
|
|
dma_addr_t tx_dma = 0;
|
|
unsigned long time_left;
|
|
void *dma_buf;
|
|
struct geni_se *se = &gi2c->se;
|
|
size_t len = msg->len;
|
|
struct i2c_msg *cur;
|
|
|
|
dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
|
|
if (dma_buf)
|
|
geni_se_select_mode(se, GENI_SE_DMA);
|
|
else
|
|
geni_se_select_mode(se, GENI_SE_FIFO);
|
|
|
|
writel_relaxed(len, se->base + SE_I2C_TX_TRANS_LEN);
|
|
geni_se_setup_m_cmd(se, I2C_WRITE, m_param);
|
|
|
|
if (dma_buf && geni_se_tx_dma_prep(se, dma_buf, len, &tx_dma)) {
|
|
geni_se_select_mode(se, GENI_SE_FIFO);
|
|
i2c_put_dma_safe_msg_buf(dma_buf, msg, false);
|
|
dma_buf = NULL;
|
|
} else {
|
|
gi2c->xfer_len = len;
|
|
gi2c->dma_addr = tx_dma;
|
|
gi2c->dma_buf = dma_buf;
|
|
}
|
|
|
|
if (!dma_buf) /* Get FIFO IRQ */
|
|
writel_relaxed(1, se->base + SE_GENI_TX_WATERMARK_REG);
|
|
|
|
cur = gi2c->cur;
|
|
time_left = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT);
|
|
if (!time_left)
|
|
geni_i2c_abort_xfer(gi2c);
|
|
|
|
geni_i2c_tx_msg_cleanup(gi2c, cur);
|
|
|
|
return gi2c->err;
|
|
}
|
|
|
|
static void i2c_gpi_cb_result(void *cb, const struct dmaengine_result *result)
|
|
{
|
|
struct geni_i2c_dev *gi2c = cb;
|
|
|
|
if (result->result != DMA_TRANS_NOERROR) {
|
|
dev_err(gi2c->se.dev, "DMA txn failed:%d\n", result->result);
|
|
gi2c->err = -EIO;
|
|
} else if (result->residue) {
|
|
dev_dbg(gi2c->se.dev, "DMA xfer has pending: %d\n", result->residue);
|
|
}
|
|
|
|
complete(&gi2c->done);
|
|
}
|
|
|
|
static void geni_i2c_gpi_unmap(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
|
|
void *tx_buf, dma_addr_t tx_addr,
|
|
void *rx_buf, dma_addr_t rx_addr)
|
|
{
|
|
if (tx_buf) {
|
|
dma_unmap_single(gi2c->se.dev->parent, tx_addr, msg->len, DMA_TO_DEVICE);
|
|
i2c_put_dma_safe_msg_buf(tx_buf, msg, !gi2c->err);
|
|
}
|
|
|
|
if (rx_buf) {
|
|
dma_unmap_single(gi2c->se.dev->parent, rx_addr, msg->len, DMA_FROM_DEVICE);
|
|
i2c_put_dma_safe_msg_buf(rx_buf, msg, !gi2c->err);
|
|
}
|
|
}
|
|
|
|
static int geni_i2c_gpi(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
|
|
struct dma_slave_config *config, dma_addr_t *dma_addr_p,
|
|
void **buf, unsigned int op, struct dma_chan *dma_chan)
|
|
{
|
|
struct gpi_i2c_config *peripheral;
|
|
unsigned int flags;
|
|
void *dma_buf;
|
|
dma_addr_t addr;
|
|
enum dma_data_direction map_dirn;
|
|
enum dma_transfer_direction dma_dirn;
|
|
struct dma_async_tx_descriptor *desc;
|
|
int ret;
|
|
|
|
peripheral = config->peripheral_config;
|
|
|
|
dma_buf = i2c_get_dma_safe_msg_buf(msg, 1);
|
|
if (!dma_buf)
|
|
return -ENOMEM;
|
|
|
|
if (op == I2C_WRITE)
|
|
map_dirn = DMA_TO_DEVICE;
|
|
else
|
|
map_dirn = DMA_FROM_DEVICE;
|
|
|
|
addr = dma_map_single(gi2c->se.dev->parent, dma_buf, msg->len, map_dirn);
|
|
if (dma_mapping_error(gi2c->se.dev->parent, addr)) {
|
|
i2c_put_dma_safe_msg_buf(dma_buf, msg, false);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* set the length as message for rx txn */
|
|
peripheral->rx_len = msg->len;
|
|
peripheral->op = op;
|
|
|
|
ret = dmaengine_slave_config(dma_chan, config);
|
|
if (ret) {
|
|
dev_err(gi2c->se.dev, "dma config error: %d for op:%d\n", ret, op);
|
|
goto err_config;
|
|
}
|
|
|
|
peripheral->set_config = 0;
|
|
peripheral->multi_msg = true;
|
|
flags = DMA_PREP_INTERRUPT | DMA_CTRL_ACK;
|
|
|
|
if (op == I2C_WRITE)
|
|
dma_dirn = DMA_MEM_TO_DEV;
|
|
else
|
|
dma_dirn = DMA_DEV_TO_MEM;
|
|
|
|
desc = dmaengine_prep_slave_single(dma_chan, addr, msg->len, dma_dirn, flags);
|
|
if (!desc) {
|
|
dev_err(gi2c->se.dev, "prep_slave_sg failed\n");
|
|
ret = -EIO;
|
|
goto err_config;
|
|
}
|
|
|
|
desc->callback_result = i2c_gpi_cb_result;
|
|
desc->callback_param = gi2c;
|
|
|
|
dmaengine_submit(desc);
|
|
*buf = dma_buf;
|
|
*dma_addr_p = addr;
|
|
|
|
return 0;
|
|
|
|
err_config:
|
|
dma_unmap_single(gi2c->se.dev->parent, addr, msg->len, map_dirn);
|
|
i2c_put_dma_safe_msg_buf(dma_buf, msg, false);
|
|
return ret;
|
|
}
|
|
|
|
static int geni_i2c_gpi_xfer(struct geni_i2c_dev *gi2c, struct i2c_msg msgs[], int num)
|
|
{
|
|
struct dma_slave_config config = {};
|
|
struct gpi_i2c_config peripheral = {};
|
|
int i, ret = 0, timeout;
|
|
dma_addr_t tx_addr, rx_addr;
|
|
void *tx_buf = NULL, *rx_buf = NULL;
|
|
const struct geni_i2c_clk_fld *itr = gi2c->clk_fld;
|
|
|
|
config.peripheral_config = &peripheral;
|
|
config.peripheral_size = sizeof(peripheral);
|
|
|
|
peripheral.pack_enable = I2C_PACK_TX | I2C_PACK_RX;
|
|
peripheral.cycle_count = itr->t_cycle_cnt;
|
|
peripheral.high_count = itr->t_high_cnt;
|
|
peripheral.low_count = itr->t_low_cnt;
|
|
peripheral.clk_div = itr->clk_div;
|
|
peripheral.set_config = 1;
|
|
peripheral.multi_msg = false;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
gi2c->cur = &msgs[i];
|
|
gi2c->err = 0;
|
|
dev_dbg(gi2c->se.dev, "msg[%d].len:%d\n", i, gi2c->cur->len);
|
|
|
|
peripheral.stretch = 0;
|
|
if (i < num - 1)
|
|
peripheral.stretch = 1;
|
|
|
|
peripheral.addr = msgs[i].addr;
|
|
|
|
if (msgs[i].flags & I2C_M_RD) {
|
|
ret = geni_i2c_gpi(gi2c, &msgs[i], &config,
|
|
&rx_addr, &rx_buf, I2C_READ, gi2c->rx_c);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
ret = geni_i2c_gpi(gi2c, &msgs[i], &config,
|
|
&tx_addr, &tx_buf, I2C_WRITE, gi2c->tx_c);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (msgs[i].flags & I2C_M_RD)
|
|
dma_async_issue_pending(gi2c->rx_c);
|
|
dma_async_issue_pending(gi2c->tx_c);
|
|
|
|
timeout = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT);
|
|
if (!timeout) {
|
|
dev_err(gi2c->se.dev, "I2C timeout gpi flags:%d addr:0x%x\n",
|
|
gi2c->cur->flags, gi2c->cur->addr);
|
|
gi2c->err = -ETIMEDOUT;
|
|
}
|
|
|
|
if (gi2c->err) {
|
|
ret = gi2c->err;
|
|
goto err;
|
|
}
|
|
|
|
geni_i2c_gpi_unmap(gi2c, &msgs[i], tx_buf, tx_addr, rx_buf, rx_addr);
|
|
}
|
|
|
|
return num;
|
|
|
|
err:
|
|
dev_err(gi2c->se.dev, "GPI transfer failed: %d\n", ret);
|
|
dmaengine_terminate_sync(gi2c->rx_c);
|
|
dmaengine_terminate_sync(gi2c->tx_c);
|
|
geni_i2c_gpi_unmap(gi2c, &msgs[i], tx_buf, tx_addr, rx_buf, rx_addr);
|
|
return ret;
|
|
}
|
|
|
|
static int geni_i2c_fifo_xfer(struct geni_i2c_dev *gi2c,
|
|
struct i2c_msg msgs[], int num)
|
|
{
|
|
int i, ret = 0;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
u32 m_param = i < (num - 1) ? STOP_STRETCH : 0;
|
|
|
|
m_param |= ((msgs[i].addr << SLV_ADDR_SHFT) & SLV_ADDR_MSK);
|
|
|
|
gi2c->cur = &msgs[i];
|
|
if (msgs[i].flags & I2C_M_RD)
|
|
ret = geni_i2c_rx_one_msg(gi2c, &msgs[i], m_param);
|
|
else
|
|
ret = geni_i2c_tx_one_msg(gi2c, &msgs[i], m_param);
|
|
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return num;
|
|
}
|
|
|
|
static int geni_i2c_xfer(struct i2c_adapter *adap,
|
|
struct i2c_msg msgs[],
|
|
int num)
|
|
{
|
|
struct geni_i2c_dev *gi2c = i2c_get_adapdata(adap);
|
|
int ret;
|
|
|
|
gi2c->err = 0;
|
|
reinit_completion(&gi2c->done);
|
|
ret = pm_runtime_get_sync(gi2c->se.dev);
|
|
if (ret < 0) {
|
|
dev_err(gi2c->se.dev, "error turning SE resources:%d\n", ret);
|
|
pm_runtime_put_noidle(gi2c->se.dev);
|
|
/* Set device in suspended since resume failed */
|
|
pm_runtime_set_suspended(gi2c->se.dev);
|
|
return ret;
|
|
}
|
|
|
|
qcom_geni_i2c_conf(gi2c);
|
|
|
|
if (gi2c->gpi_mode)
|
|
ret = geni_i2c_gpi_xfer(gi2c, msgs, num);
|
|
else
|
|
ret = geni_i2c_fifo_xfer(gi2c, msgs, num);
|
|
|
|
pm_runtime_mark_last_busy(gi2c->se.dev);
|
|
pm_runtime_put_autosuspend(gi2c->se.dev);
|
|
gi2c->cur = NULL;
|
|
gi2c->err = 0;
|
|
return ret;
|
|
}
|
|
|
|
static u32 geni_i2c_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
|
|
}
|
|
|
|
static const struct i2c_algorithm geni_i2c_algo = {
|
|
.master_xfer = geni_i2c_xfer,
|
|
.functionality = geni_i2c_func,
|
|
};
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id geni_i2c_acpi_match[] = {
|
|
{ "QCOM0220"},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, geni_i2c_acpi_match);
|
|
#endif
|
|
|
|
static void release_gpi_dma(struct geni_i2c_dev *gi2c)
|
|
{
|
|
if (gi2c->rx_c)
|
|
dma_release_channel(gi2c->rx_c);
|
|
|
|
if (gi2c->tx_c)
|
|
dma_release_channel(gi2c->tx_c);
|
|
}
|
|
|
|
static int setup_gpi_dma(struct geni_i2c_dev *gi2c)
|
|
{
|
|
int ret;
|
|
|
|
geni_se_select_mode(&gi2c->se, GENI_GPI_DMA);
|
|
gi2c->tx_c = dma_request_chan(gi2c->se.dev, "tx");
|
|
if (IS_ERR(gi2c->tx_c)) {
|
|
ret = dev_err_probe(gi2c->se.dev, PTR_ERR(gi2c->tx_c),
|
|
"Failed to get tx DMA ch\n");
|
|
goto err_tx;
|
|
}
|
|
|
|
gi2c->rx_c = dma_request_chan(gi2c->se.dev, "rx");
|
|
if (IS_ERR(gi2c->rx_c)) {
|
|
ret = dev_err_probe(gi2c->se.dev, PTR_ERR(gi2c->rx_c),
|
|
"Failed to get rx DMA ch\n");
|
|
goto err_rx;
|
|
}
|
|
|
|
dev_dbg(gi2c->se.dev, "Grabbed GPI dma channels\n");
|
|
return 0;
|
|
|
|
err_rx:
|
|
dma_release_channel(gi2c->tx_c);
|
|
err_tx:
|
|
return ret;
|
|
}
|
|
|
|
static int geni_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct geni_i2c_dev *gi2c;
|
|
struct resource *res;
|
|
u32 proto, tx_depth, fifo_disable;
|
|
int ret;
|
|
struct device *dev = &pdev->dev;
|
|
const struct geni_i2c_desc *desc = NULL;
|
|
|
|
gi2c = devm_kzalloc(dev, sizeof(*gi2c), GFP_KERNEL);
|
|
if (!gi2c)
|
|
return -ENOMEM;
|
|
|
|
gi2c->se.dev = dev;
|
|
gi2c->se.wrapper = dev_get_drvdata(dev->parent);
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
gi2c->se.base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(gi2c->se.base))
|
|
return PTR_ERR(gi2c->se.base);
|
|
|
|
desc = device_get_match_data(&pdev->dev);
|
|
|
|
if (desc && desc->has_core_clk) {
|
|
gi2c->core_clk = devm_clk_get(dev, "core");
|
|
if (IS_ERR(gi2c->core_clk))
|
|
return PTR_ERR(gi2c->core_clk);
|
|
}
|
|
|
|
gi2c->se.clk = devm_clk_get(dev, "se");
|
|
if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(dev))
|
|
return PTR_ERR(gi2c->se.clk);
|
|
|
|
ret = device_property_read_u32(dev, "clock-frequency",
|
|
&gi2c->clk_freq_out);
|
|
if (ret) {
|
|
dev_info(dev, "Bus frequency not specified, default to 100kHz.\n");
|
|
gi2c->clk_freq_out = KHZ(100);
|
|
}
|
|
|
|
if (has_acpi_companion(dev))
|
|
ACPI_COMPANION_SET(&gi2c->adap.dev, ACPI_COMPANION(dev));
|
|
|
|
gi2c->irq = platform_get_irq(pdev, 0);
|
|
if (gi2c->irq < 0)
|
|
return gi2c->irq;
|
|
|
|
ret = geni_i2c_clk_map_idx(gi2c);
|
|
if (ret) {
|
|
dev_err(dev, "Invalid clk frequency %d Hz: %d\n",
|
|
gi2c->clk_freq_out, ret);
|
|
return ret;
|
|
}
|
|
|
|
gi2c->adap.algo = &geni_i2c_algo;
|
|
init_completion(&gi2c->done);
|
|
spin_lock_init(&gi2c->lock);
|
|
platform_set_drvdata(pdev, gi2c);
|
|
ret = devm_request_irq(dev, gi2c->irq, geni_i2c_irq, 0,
|
|
dev_name(dev), gi2c);
|
|
if (ret) {
|
|
dev_err(dev, "Request_irq failed:%d: err:%d\n",
|
|
gi2c->irq, ret);
|
|
return ret;
|
|
}
|
|
/* Disable the interrupt so that the system can enter low-power mode */
|
|
disable_irq(gi2c->irq);
|
|
i2c_set_adapdata(&gi2c->adap, gi2c);
|
|
gi2c->adap.dev.parent = dev;
|
|
gi2c->adap.dev.of_node = dev->of_node;
|
|
strscpy(gi2c->adap.name, "Geni-I2C", sizeof(gi2c->adap.name));
|
|
|
|
ret = geni_icc_get(&gi2c->se, desc ? desc->icc_ddr : "qup-memory");
|
|
if (ret)
|
|
return ret;
|
|
/*
|
|
* Set the bus quota for core and cpu to a reasonable value for
|
|
* register access.
|
|
* Set quota for DDR based on bus speed.
|
|
*/
|
|
gi2c->se.icc_paths[GENI_TO_CORE].avg_bw = GENI_DEFAULT_BW;
|
|
gi2c->se.icc_paths[CPU_TO_GENI].avg_bw = GENI_DEFAULT_BW;
|
|
if (!desc || desc->icc_ddr)
|
|
gi2c->se.icc_paths[GENI_TO_DDR].avg_bw = Bps_to_icc(gi2c->clk_freq_out);
|
|
|
|
ret = geni_icc_set_bw(&gi2c->se);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(gi2c->core_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = geni_se_resources_on(&gi2c->se);
|
|
if (ret) {
|
|
dev_err(dev, "Error turning on resources %d\n", ret);
|
|
return ret;
|
|
}
|
|
proto = geni_se_read_proto(&gi2c->se);
|
|
if (proto != GENI_SE_I2C) {
|
|
dev_err(dev, "Invalid proto %d\n", proto);
|
|
geni_se_resources_off(&gi2c->se);
|
|
clk_disable_unprepare(gi2c->core_clk);
|
|
return -ENXIO;
|
|
}
|
|
|
|
if (desc && desc->no_dma_support)
|
|
fifo_disable = false;
|
|
else
|
|
fifo_disable = readl_relaxed(gi2c->se.base + GENI_IF_DISABLE_RO) & FIFO_IF_DISABLE;
|
|
|
|
if (fifo_disable) {
|
|
/* FIFO is disabled, so we can only use GPI DMA */
|
|
gi2c->gpi_mode = true;
|
|
ret = setup_gpi_dma(gi2c);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "Failed to setup GPI DMA mode\n");
|
|
|
|
dev_dbg(dev, "Using GPI DMA mode for I2C\n");
|
|
} else {
|
|
gi2c->gpi_mode = false;
|
|
tx_depth = geni_se_get_tx_fifo_depth(&gi2c->se);
|
|
|
|
/* I2C Master Hub Serial Elements doesn't have the HW_PARAM_0 register */
|
|
if (!tx_depth && desc)
|
|
tx_depth = desc->tx_fifo_depth;
|
|
|
|
if (!tx_depth) {
|
|
dev_err(dev, "Invalid TX FIFO depth\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
gi2c->tx_wm = tx_depth - 1;
|
|
geni_se_init(&gi2c->se, gi2c->tx_wm, tx_depth);
|
|
geni_se_config_packing(&gi2c->se, BITS_PER_BYTE,
|
|
PACKING_BYTES_PW, true, true, true);
|
|
|
|
dev_dbg(dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
|
|
}
|
|
|
|
clk_disable_unprepare(gi2c->core_clk);
|
|
ret = geni_se_resources_off(&gi2c->se);
|
|
if (ret) {
|
|
dev_err(dev, "Error turning off resources %d\n", ret);
|
|
goto err_dma;
|
|
}
|
|
|
|
ret = geni_icc_disable(&gi2c->se);
|
|
if (ret)
|
|
goto err_dma;
|
|
|
|
gi2c->suspended = 1;
|
|
pm_runtime_set_suspended(gi2c->se.dev);
|
|
pm_runtime_set_autosuspend_delay(gi2c->se.dev, I2C_AUTO_SUSPEND_DELAY);
|
|
pm_runtime_use_autosuspend(gi2c->se.dev);
|
|
pm_runtime_enable(gi2c->se.dev);
|
|
|
|
ret = i2c_add_adapter(&gi2c->adap);
|
|
if (ret) {
|
|
dev_err(dev, "Error adding i2c adapter %d\n", ret);
|
|
pm_runtime_disable(gi2c->se.dev);
|
|
goto err_dma;
|
|
}
|
|
|
|
dev_dbg(dev, "Geni-I2C adaptor successfully added\n");
|
|
|
|
return 0;
|
|
|
|
err_dma:
|
|
release_gpi_dma(gi2c);
|
|
return ret;
|
|
}
|
|
|
|
static int geni_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct geni_i2c_dev *gi2c = platform_get_drvdata(pdev);
|
|
|
|
i2c_del_adapter(&gi2c->adap);
|
|
release_gpi_dma(gi2c);
|
|
pm_runtime_disable(gi2c->se.dev);
|
|
return 0;
|
|
}
|
|
|
|
static void geni_i2c_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct geni_i2c_dev *gi2c = platform_get_drvdata(pdev);
|
|
|
|
/* Make client i2c transfers start failing */
|
|
i2c_mark_adapter_suspended(&gi2c->adap);
|
|
}
|
|
|
|
static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
|
|
{
|
|
int ret;
|
|
struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
|
|
|
|
disable_irq(gi2c->irq);
|
|
ret = geni_se_resources_off(&gi2c->se);
|
|
if (ret) {
|
|
enable_irq(gi2c->irq);
|
|
return ret;
|
|
|
|
} else {
|
|
gi2c->suspended = 1;
|
|
}
|
|
|
|
clk_disable_unprepare(gi2c->core_clk);
|
|
|
|
return geni_icc_disable(&gi2c->se);
|
|
}
|
|
|
|
static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
|
|
{
|
|
int ret;
|
|
struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
|
|
|
|
ret = geni_icc_enable(&gi2c->se);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(gi2c->core_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = geni_se_resources_on(&gi2c->se);
|
|
if (ret)
|
|
return ret;
|
|
|
|
enable_irq(gi2c->irq);
|
|
gi2c->suspended = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused geni_i2c_suspend_noirq(struct device *dev)
|
|
{
|
|
struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
|
|
|
|
i2c_mark_adapter_suspended(&gi2c->adap);
|
|
|
|
if (!gi2c->suspended) {
|
|
geni_i2c_runtime_suspend(dev);
|
|
pm_runtime_disable(dev);
|
|
pm_runtime_set_suspended(dev);
|
|
pm_runtime_enable(dev);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused geni_i2c_resume_noirq(struct device *dev)
|
|
{
|
|
struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
|
|
|
|
i2c_mark_adapter_resumed(&gi2c->adap);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops geni_i2c_pm_ops = {
|
|
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(geni_i2c_suspend_noirq, geni_i2c_resume_noirq)
|
|
SET_RUNTIME_PM_OPS(geni_i2c_runtime_suspend, geni_i2c_runtime_resume,
|
|
NULL)
|
|
};
|
|
|
|
static const struct geni_i2c_desc i2c_master_hub = {
|
|
.has_core_clk = true,
|
|
.icc_ddr = NULL,
|
|
.no_dma_support = true,
|
|
.tx_fifo_depth = 16,
|
|
};
|
|
|
|
static const struct of_device_id geni_i2c_dt_match[] = {
|
|
{ .compatible = "qcom,geni-i2c" },
|
|
{ .compatible = "qcom,geni-i2c-master-hub", .data = &i2c_master_hub },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, geni_i2c_dt_match);
|
|
|
|
static struct platform_driver geni_i2c_driver = {
|
|
.probe = geni_i2c_probe,
|
|
.remove = geni_i2c_remove,
|
|
.shutdown = geni_i2c_shutdown,
|
|
.driver = {
|
|
.name = "geni_i2c",
|
|
.pm = &geni_i2c_pm_ops,
|
|
.of_match_table = geni_i2c_dt_match,
|
|
.acpi_match_table = ACPI_PTR(geni_i2c_acpi_match),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(geni_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("I2C Controller Driver for GENI based QUP cores");
|
|
MODULE_LICENSE("GPL v2");
|