WSL2-Linux-Kernel/arch/arm/mach-omap1
Paul Walmsley 7239d309b5 ARM: OMAP1: PM: fix some build warnings on 1510-only Kconfigs
Building an OMAP1510-only Kconfig generates the following warnings:

arch/arm/mach-omap1/pm.c: In function ¡omap1_pm_idle¢:
arch/arm/mach-omap1/pm.c:123:2: warning: #warning Enable 32kHz OS timer in order to allow sleep states in idle [-Wcpp]
 #warning Enable 32kHz OS timer in order to allow sleep states in idle
  ^
arch/arm/mach-omap1/pm.c: At top level:
arch/arm/mach-omap1/pm.c:76:23: warning: ¡enable_dyn_sleep¢ defined but not used [-Wunused-variable]
 static unsigned short enable_dyn_sleep = 0;
                       ^

These are not so easy to fix in an obviously correct fashion, since I
don't have these devices up and running in my testbed.  So, use
arch/arm/plat-omap/Kconfig and the existing pm.c source as a guide,
and posit that deep power saving states are only supported on OMAP16xx
chips with kernels built with both CONFIG_OMAP_DM_TIMER=y and
CONFIG_OMAP_32K_TIMER=y.

While here, clean up a few printk()s and unnecessary #ifdefs.

This second version of the patch incorporates several suggestions from
Jon Hunter <jgchunter@gmail.com>.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Tuukka Tikkanen <tuukka.tikkanen@linaro.org>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Jon Hunter <jgchunter@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 16:09:23 -07:00
..
include/mach ARM: 8271/1: omap1: Migrate debug_ll macros to use 8250.S 2015-01-21 15:49:39 +00:00
Kconfig ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD" 2013-04-01 08:52:27 -07:00
Makefile mailbox/omap: move the OMAP mailbox framework to drivers 2013-06-11 11:41:51 -05:00
Makefile.boot ARM: 7022/1: allow to detect conflicting zreladdrs 2011-10-17 09:12:40 +01:00
ams-delta-fiq-handler.S ARM: OMAP1: Move board-ams-delta.h from plat to mach 2012-09-20 15:02:19 -07:00
ams-delta-fiq.c arm: omap: Fix typo in ams-delta-fiq.c 2014-03-20 12:44:02 +01:00
board-ams-delta.c Merge branch 'clocksource/cleanup' into next/cleanup 2013-01-14 10:20:02 -08:00
board-fsample.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-generic.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-h2-mmc.c ARM: OMAP: Split plat/mmc.h into local headers and platform_data 2012-10-15 12:09:43 -07:00
board-h2.c ARM: OMAP: replace checks for CONFIG_USB_GADGET_OMAP 2014-05-16 14:14:25 -07:00
board-h2.h ARM: OMAP: No need to include board-h2.h from hardware.h 2009-03-23 18:07:33 -07:00
board-h3-mmc.c ARM: OMAP: Split plat/mmc.h into local headers and platform_data 2012-10-15 12:09:43 -07:00
board-h3.c ARM: OMAP: replace checks for CONFIG_USB_GADGET_OMAP 2014-05-16 14:14:25 -07:00
board-h3.h ARM: OMAP: No need to include board-h3.h from hardware.h 2009-03-23 18:07:33 -07:00
board-htcherald.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-innovator.c ARM: OMAP: replace checks for CONFIG_USB_GADGET_OMAP 2014-05-16 14:14:25 -07:00
board-nand.c ARM: OMAP1: board files: deduplicate and clean some NAND-related code 2012-04-13 06:34:31 -06:00
board-nokia770.c ARM: OMAP1: nokia770: enable tahvo-usb 2014-02-13 15:20:14 -08:00
board-osk.c ARM: OMAP: replace checks for CONFIG_USB_GADGET_OMAP 2014-05-16 14:14:25 -07:00
board-palmte.c ARM: OMAP1: Remove legacy irda.h and irda setup from board files 2013-06-18 00:12:34 -07:00
board-palmtt.c ARM: OMAP1: Remove legacy irda.h and irda setup from board files 2013-06-18 00:12:34 -07:00
board-palmz71.c ARM: OMAP1: Remove legacy irda.h and irda setup from board files 2013-06-18 00:12:34 -07:00
board-perseus2.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-sx1-mmc.c ARM: OMAP: Split plat/mmc.h into local headers and platform_data 2012-10-15 12:09:43 -07:00
board-sx1.c ARM: OMAP: SX1: remove check for CONFIG_SX1_OLD_FLASH 2014-05-16 14:12:05 -07:00
board-voiceblue.c reboot: arm: change reboot_mode to use enum reboot_mode 2013-07-09 10:33:29 -07:00
clock.c ARM: OMAP: Split sram.h to local headers and minimal shared header 2012-10-31 10:14:13 -07:00
clock.h ARM: OMAP: clock: split plat/clkdev_omap.h into OMAP1/2 files 2012-10-18 16:23:30 -07:00
clock_data.c ARM: OMAP1: fix USB host on 1710 2013-03-13 04:10:57 -06:00
common.h ARM: mach-omap1: Fix omap1510_fpga_init_irq() implicit declarations. 2013-10-08 11:04:22 -07:00
devices.c ARM: OMAP1: Remove duplicated DMA channel definitions 2013-06-18 00:12:34 -07:00
dma.c dmaengine: omap-dma: move register read/writes into omap-dma.c 2014-04-04 00:31:49 +01:00
fb.c ARM: OMAP: Split fb.c to remove last remaining cpu_is_omap usage 2012-12-17 10:50:40 -08:00
flash.c ARM: OMAP1: Move plat/tc.h to mach/tc.h for omap1 2012-10-17 11:36:40 -07:00
fpga.c ARM: OMAP: remove deprecated IRQF_DISABLED 2013-10-03 13:24:36 -07:00
fpga.h ARM: OMAP: Fix relative includes for fpga.h 2012-10-31 15:37:14 -07:00
gpio7xx.c ARM: OMAP1: Fix a bunch of GPIO related section warnings after initdata got corrected 2013-10-18 10:50:51 -07:00
gpio15xx.c ARM: OMAP1: Fix a bunch of GPIO related section warnings after initdata got corrected 2013-10-18 10:50:51 -07:00
gpio16xx.c ARM: OMAP1: Fix a bunch of GPIO related section warnings after initdata got corrected 2013-10-18 10:50:51 -07:00
i2c.c ARM: OMAP: Fix i2c cmdline initcall for multiplatform 2013-01-11 11:24:19 -08:00
id.c ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2 2012-10-18 16:23:46 -07:00
io.c ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h 2012-11-30 08:41:50 -08:00
iomap.h ARM: OMAP1: Remove relative includes 2012-10-31 15:37:14 -07:00
irq.c ARM: OMAP1: irq.c: Remove unused function 2015-01-07 09:53:51 -08:00
lcd_dma.c ARM: OMAP1: Remove dma.h 2013-06-18 00:12:34 -07:00
mcbsp.c ARM: OMAP1: Remove McBSP DMA channel definitions 2013-06-18 00:12:34 -07:00
mmc.h ARM: OMAP: Split plat/mmc.h into local headers and platform_data 2012-10-15 12:09:43 -07:00
mux.c ARM: OMAP1: Make plat/mux.h omap1 only 2012-09-20 14:54:57 -07:00
ocpi.c omap16xx: Removes fixme no longer needed in ocpi_enable() 2014-07-08 01:15:36 -07:00
opp.h ARM: OMAP1: Move dpll1 rates selection from config to runtime 2011-12-08 18:02:23 -08:00
opp_data.c ARM: OMAP: clock: split plat/clkdev_omap.h into OMAP1/2 files 2012-10-18 16:23:30 -07:00
pm.c ARM: OMAP1: PM: fix some build warnings on 1510-only Kconfigs 2015-03-16 16:09:23 -07:00
pm.h ARM: 6649/1: omap: use fncpy to copy the PM code functions to SRAM 2011-02-04 14:26:08 +00:00
pm_bus.c ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM 2014-12-13 00:42:49 +01:00
reset.c reboot: arm: change reboot_mode to use enum reboot_mode 2013-07-09 10:33:29 -07:00
serial.c ARM: OMAP: Make plat/fpga.h local to arch/arm/plat-omap 2012-10-17 11:36:37 -07:00
sleep.S ARM: OMAP1: Remove relative includes 2012-10-31 15:37:14 -07:00
soc.h ARM: OMAP1: Remove relative includes 2012-10-31 15:37:14 -07:00
sram-init.c ARM: OMAP: Move omap1 specific code to local sram.c 2012-10-31 10:14:14 -07:00
sram.S ARM: OMAP: Remove remaining includes for mach/io.h 2012-03-06 21:34:38 -06:00
sram.h ARM: OMAP: Split sram.h to local headers and minimal shared header 2012-10-31 10:14:13 -07:00
time.c ARM: OMAP1: Switch to sched_clock_register() 2013-11-21 15:41:00 -08:00
timer.c ARM: OMAP: Add platform data header for DMTIMERs 2012-11-16 10:35:08 -06:00
timer32k.c ARM: OMAP1: timer32k.c: Remove unused function 2015-01-07 09:53:51 -08:00
usb.c ARM: OMAP1: fix omap_udc registration 2013-04-08 13:59:51 -07:00