586 строки
14 KiB
C
586 строки
14 KiB
C
/*
|
|
* linux/arch/arm/mach-pxa/corgi_lcd.c
|
|
*
|
|
* Corgi/Spitz LCD Specific Code
|
|
*
|
|
* Copyright (C) 2005 Richard Purdie
|
|
*
|
|
* Connectivity:
|
|
* Corgi - LCD to ATI Imageon w100 (Wallaby)
|
|
* Spitz - LCD to PXA Framebuffer
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/string.h>
|
|
#include <asm/arch/akita.h>
|
|
#include <asm/arch/corgi.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/arch/pxa-regs.h>
|
|
#include <asm/arch/sharpsl.h>
|
|
#include <asm/arch/spitz.h>
|
|
#include <asm/hardware/scoop.h>
|
|
#include <asm/mach/sharpsl_param.h>
|
|
#include "generic.h"
|
|
|
|
/* Register Addresses */
|
|
#define RESCTL_ADRS 0x00
|
|
#define PHACTRL_ADRS 0x01
|
|
#define DUTYCTRL_ADRS 0x02
|
|
#define POWERREG0_ADRS 0x03
|
|
#define POWERREG1_ADRS 0x04
|
|
#define GPOR3_ADRS 0x05
|
|
#define PICTRL_ADRS 0x06
|
|
#define POLCTRL_ADRS 0x07
|
|
|
|
/* Register Bit Definitions */
|
|
#define RESCTL_QVGA 0x01
|
|
#define RESCTL_VGA 0x00
|
|
|
|
#define POWER1_VW_ON 0x01 /* VW Supply FET ON */
|
|
#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */
|
|
#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */
|
|
|
|
#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */
|
|
#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */
|
|
#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */
|
|
|
|
#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */
|
|
#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */
|
|
#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */
|
|
#define POWER0_COM_ON 0x08 /* COM Power Supply ON */
|
|
#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */
|
|
|
|
#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */
|
|
#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */
|
|
#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */
|
|
|
|
#define PICTRL_INIT_STATE 0x01
|
|
#define PICTRL_INIOFF 0x02
|
|
#define PICTRL_POWER_DOWN 0x04
|
|
#define PICTRL_COM_SIGNAL_OFF 0x08
|
|
#define PICTRL_DAC_SIGNAL_OFF 0x10
|
|
|
|
#define POLCTRL_SYNC_POL_FALL 0x01
|
|
#define POLCTRL_EN_POL_FALL 0x02
|
|
#define POLCTRL_DATA_POL_FALL 0x04
|
|
#define POLCTRL_SYNC_ACT_H 0x08
|
|
#define POLCTRL_EN_ACT_L 0x10
|
|
|
|
#define POLCTRL_SYNC_POL_RISE 0x00
|
|
#define POLCTRL_EN_POL_RISE 0x00
|
|
#define POLCTRL_DATA_POL_RISE 0x00
|
|
#define POLCTRL_SYNC_ACT_L 0x00
|
|
#define POLCTRL_EN_ACT_H 0x00
|
|
|
|
#define PHACTRL_PHASE_MANUAL 0x01
|
|
#define DEFAULT_PHAD_QVGA (9)
|
|
#define DEFAULT_COMADJ (125)
|
|
|
|
/*
|
|
* This is only a psuedo I2C interface. We can't use the standard kernel
|
|
* routines as the interface is write only. We just assume the data is acked...
|
|
*/
|
|
static void lcdtg_ssp_i2c_send(u8 data)
|
|
{
|
|
corgi_ssp_lcdtg_send(POWERREG0_ADRS, data);
|
|
udelay(10);
|
|
}
|
|
|
|
static void lcdtg_i2c_send_bit(u8 data)
|
|
{
|
|
lcdtg_ssp_i2c_send(data);
|
|
lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK);
|
|
lcdtg_ssp_i2c_send(data);
|
|
}
|
|
|
|
static void lcdtg_i2c_send_start(u8 base)
|
|
{
|
|
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
|
|
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
|
|
lcdtg_ssp_i2c_send(base);
|
|
}
|
|
|
|
static void lcdtg_i2c_send_stop(u8 base)
|
|
{
|
|
lcdtg_ssp_i2c_send(base);
|
|
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
|
|
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
|
|
}
|
|
|
|
static void lcdtg_i2c_send_byte(u8 base, u8 data)
|
|
{
|
|
int i;
|
|
for (i = 0; i < 8; i++) {
|
|
if (data & 0x80)
|
|
lcdtg_i2c_send_bit(base | POWER0_COM_DOUT);
|
|
else
|
|
lcdtg_i2c_send_bit(base);
|
|
data <<= 1;
|
|
}
|
|
}
|
|
|
|
static void lcdtg_i2c_wait_ack(u8 base)
|
|
{
|
|
lcdtg_i2c_send_bit(base);
|
|
}
|
|
|
|
static void lcdtg_set_common_voltage(u8 base_data, u8 data)
|
|
{
|
|
/* Set Common Voltage to M62332FP via I2C */
|
|
lcdtg_i2c_send_start(base_data);
|
|
lcdtg_i2c_send_byte(base_data, 0x9c);
|
|
lcdtg_i2c_wait_ack(base_data);
|
|
lcdtg_i2c_send_byte(base_data, 0x00);
|
|
lcdtg_i2c_wait_ack(base_data);
|
|
lcdtg_i2c_send_byte(base_data, data);
|
|
lcdtg_i2c_wait_ack(base_data);
|
|
lcdtg_i2c_send_stop(base_data);
|
|
}
|
|
|
|
/* Set Phase Adjust */
|
|
static void lcdtg_set_phadadj(int mode)
|
|
{
|
|
int adj;
|
|
switch(mode) {
|
|
case 480:
|
|
case 640:
|
|
/* Setting for VGA */
|
|
adj = sharpsl_param.phadadj;
|
|
if (adj < 0) {
|
|
adj = PHACTRL_PHASE_MANUAL;
|
|
} else {
|
|
adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL;
|
|
}
|
|
break;
|
|
case 240:
|
|
case 320:
|
|
default:
|
|
/* Setting for QVGA */
|
|
adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
|
|
break;
|
|
}
|
|
|
|
corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj);
|
|
}
|
|
|
|
static int lcd_inited;
|
|
|
|
static void lcdtg_hw_init(int mode)
|
|
{
|
|
if (!lcd_inited) {
|
|
int comadj;
|
|
|
|
/* Initialize Internal Logic & Port */
|
|
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE
|
|
| PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF);
|
|
|
|
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF
|
|
| POWER0_COM_OFF | POWER0_VCC5_OFF);
|
|
|
|
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
|
|
|
|
/* VDD(+8V), SVSS(-4V) ON */
|
|
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
|
|
mdelay(3);
|
|
|
|
/* DAC ON */
|
|
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
|
|
| POWER0_COM_OFF | POWER0_VCC5_OFF);
|
|
|
|
/* INIB = H, INI = L */
|
|
/* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
|
|
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
|
|
|
|
/* Set Common Voltage */
|
|
comadj = sharpsl_param.comadj;
|
|
if (comadj < 0)
|
|
comadj = DEFAULT_COMADJ;
|
|
lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj);
|
|
|
|
/* VCC5 ON, DAC ON */
|
|
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
|
|
POWER0_COM_OFF | POWER0_VCC5_ON);
|
|
|
|
/* GVSS(-8V) ON, VDD ON */
|
|
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
|
|
mdelay(2);
|
|
|
|
/* COM SIGNAL ON (PICTL[3] = L) */
|
|
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE);
|
|
|
|
/* COM ON, DAC ON, VCC5_ON */
|
|
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
|
|
| POWER0_COM_ON | POWER0_VCC5_ON);
|
|
|
|
/* VW ON, GVSS ON, VDD ON */
|
|
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
|
|
|
|
/* Signals output enable */
|
|
corgi_ssp_lcdtg_send(PICTRL_ADRS, 0);
|
|
|
|
/* Set Phase Adjust */
|
|
lcdtg_set_phadadj(mode);
|
|
|
|
/* Initialize for Input Signals from ATI */
|
|
corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE
|
|
| POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H);
|
|
udelay(1000);
|
|
|
|
lcd_inited=1;
|
|
} else {
|
|
lcdtg_set_phadadj(mode);
|
|
}
|
|
|
|
switch(mode) {
|
|
case 480:
|
|
case 640:
|
|
/* Set Lcd Resolution (VGA) */
|
|
corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA);
|
|
break;
|
|
case 240:
|
|
case 320:
|
|
default:
|
|
/* Set Lcd Resolution (QVGA) */
|
|
corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void lcdtg_suspend(void)
|
|
{
|
|
/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
|
|
mdelay(34);
|
|
|
|
/* (1)VW OFF */
|
|
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
|
|
|
|
/* (2)COM OFF */
|
|
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
|
|
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
|
|
|
|
/* (3)Set Common Voltage Bias 0V */
|
|
lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0);
|
|
|
|
/* (4)GVSS OFF */
|
|
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
|
|
|
|
/* (5)VCC5 OFF */
|
|
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
|
|
|
|
/* (6)Set PDWN, INIOFF, DACOFF */
|
|
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
|
|
PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
|
|
|
|
/* (7)DAC OFF */
|
|
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
|
|
|
|
/* (8)VDD OFF */
|
|
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
|
|
|
|
lcd_inited = 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Corgi w100 Frame Buffer Device
|
|
*/
|
|
#ifdef CONFIG_PXA_SHARP_C7xx
|
|
|
|
#include <video/w100fb.h>
|
|
|
|
static void w100_lcdtg_suspend(struct w100fb_par *par)
|
|
{
|
|
lcdtg_suspend();
|
|
}
|
|
|
|
static void w100_lcdtg_init(struct w100fb_par *par)
|
|
{
|
|
lcdtg_hw_init(par->xres);
|
|
}
|
|
|
|
|
|
static struct w100_tg_info corgi_lcdtg_info = {
|
|
.change = w100_lcdtg_init,
|
|
.suspend = w100_lcdtg_suspend,
|
|
.resume = w100_lcdtg_init,
|
|
};
|
|
|
|
static struct w100_mem_info corgi_fb_mem = {
|
|
.ext_cntl = 0x00040003,
|
|
.sdram_mode_reg = 0x00650021,
|
|
.ext_timing_cntl = 0x10002a4a,
|
|
.io_cntl = 0x7ff87012,
|
|
.size = 0x1fffff,
|
|
};
|
|
|
|
static struct w100_gen_regs corgi_fb_regs = {
|
|
.lcd_format = 0x00000003,
|
|
.lcdd_cntl1 = 0x01CC0000,
|
|
.lcdd_cntl2 = 0x0003FFFF,
|
|
.genlcd_cntl1 = 0x00FFFF0D,
|
|
.genlcd_cntl2 = 0x003F3003,
|
|
.genlcd_cntl3 = 0x000102aa,
|
|
};
|
|
|
|
static struct w100_gpio_regs corgi_fb_gpio = {
|
|
.init_data1 = 0x000000bf,
|
|
.init_data2 = 0x00000000,
|
|
.gpio_dir1 = 0x00000000,
|
|
.gpio_oe1 = 0x03c0feff,
|
|
.gpio_dir2 = 0x00000000,
|
|
.gpio_oe2 = 0x00000000,
|
|
};
|
|
|
|
static struct w100_mode corgi_fb_modes[] = {
|
|
{
|
|
.xres = 480,
|
|
.yres = 640,
|
|
.left_margin = 0x56,
|
|
.right_margin = 0x55,
|
|
.upper_margin = 0x03,
|
|
.lower_margin = 0x00,
|
|
.crtc_ss = 0x82360056,
|
|
.crtc_ls = 0xA0280000,
|
|
.crtc_gs = 0x80280028,
|
|
.crtc_vpos_gs = 0x02830002,
|
|
.crtc_rev = 0x00400008,
|
|
.crtc_dclk = 0xA0000000,
|
|
.crtc_gclk = 0x8015010F,
|
|
.crtc_goe = 0x80100110,
|
|
.crtc_ps1_active = 0x41060010,
|
|
.pll_freq = 75,
|
|
.fast_pll_freq = 100,
|
|
.sysclk_src = CLK_SRC_PLL,
|
|
.sysclk_divider = 0,
|
|
.pixclk_src = CLK_SRC_PLL,
|
|
.pixclk_divider = 2,
|
|
.pixclk_divider_rotated = 6,
|
|
},{
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.left_margin = 0x27,
|
|
.right_margin = 0x2e,
|
|
.upper_margin = 0x01,
|
|
.lower_margin = 0x00,
|
|
.crtc_ss = 0x81170027,
|
|
.crtc_ls = 0xA0140000,
|
|
.crtc_gs = 0xC0140014,
|
|
.crtc_vpos_gs = 0x00010141,
|
|
.crtc_rev = 0x00400008,
|
|
.crtc_dclk = 0xA0000000,
|
|
.crtc_gclk = 0x8015010F,
|
|
.crtc_goe = 0x80100110,
|
|
.crtc_ps1_active = 0x41060010,
|
|
.pll_freq = 0,
|
|
.fast_pll_freq = 0,
|
|
.sysclk_src = CLK_SRC_XTAL,
|
|
.sysclk_divider = 0,
|
|
.pixclk_src = CLK_SRC_XTAL,
|
|
.pixclk_divider = 1,
|
|
.pixclk_divider_rotated = 1,
|
|
},
|
|
|
|
};
|
|
|
|
static struct w100fb_mach_info corgi_fb_info = {
|
|
.tg = &corgi_lcdtg_info,
|
|
.init_mode = INIT_MODE_ROTATED,
|
|
.mem = &corgi_fb_mem,
|
|
.regs = &corgi_fb_regs,
|
|
.modelist = &corgi_fb_modes[0],
|
|
.num_modes = 2,
|
|
.gpio = &corgi_fb_gpio,
|
|
.xtal_freq = 12500000,
|
|
.xtal_dbl = 0,
|
|
};
|
|
|
|
static struct resource corgi_fb_resources[] = {
|
|
[0] = {
|
|
.start = 0x08000000,
|
|
.end = 0x08ffffff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
struct platform_device corgifb_device = {
|
|
.name = "w100fb",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(corgi_fb_resources),
|
|
.resource = corgi_fb_resources,
|
|
.dev = {
|
|
.platform_data = &corgi_fb_info,
|
|
.parent = &corgissp_device.dev,
|
|
},
|
|
|
|
};
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Spitz PXA Frame Buffer Device
|
|
*/
|
|
#ifdef CONFIG_PXA_SHARP_Cxx00
|
|
|
|
#include <asm/arch/pxafb.h>
|
|
|
|
void spitz_lcd_power(int on, struct fb_var_screeninfo *var)
|
|
{
|
|
if (on)
|
|
lcdtg_hw_init(var->xres);
|
|
else
|
|
lcdtg_suspend();
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Corgi/Spitz Touchscreen to LCD interface
|
|
*/
|
|
static unsigned long (*get_hsync_time)(struct device *dev);
|
|
|
|
static void inline sharpsl_wait_sync(int gpio)
|
|
{
|
|
while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
|
|
while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
|
|
}
|
|
|
|
#ifdef CONFIG_PXA_SHARP_C7xx
|
|
unsigned long corgi_get_hsync_len(void)
|
|
{
|
|
if (!get_hsync_time)
|
|
get_hsync_time = symbol_get(w100fb_get_hsynclen);
|
|
if (!get_hsync_time)
|
|
return 0;
|
|
|
|
return get_hsync_time(&corgifb_device.dev);
|
|
}
|
|
|
|
void corgi_put_hsync(void)
|
|
{
|
|
if (get_hsync_time)
|
|
symbol_put(w100fb_get_hsynclen);
|
|
get_hsync_time = NULL;
|
|
}
|
|
|
|
void corgi_wait_hsync(void)
|
|
{
|
|
sharpsl_wait_sync(CORGI_GPIO_HSYNC);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PXA_SHARP_Cxx00
|
|
static struct device *spitz_pxafb_dev;
|
|
|
|
static int is_pxafb_device(struct device * dev, void * data)
|
|
{
|
|
struct platform_device *pdev = container_of(dev, struct platform_device, dev);
|
|
|
|
return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
|
|
}
|
|
|
|
unsigned long spitz_get_hsync_len(void)
|
|
{
|
|
#ifdef CONFIG_FB_PXA
|
|
if (!spitz_pxafb_dev) {
|
|
spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
|
|
if (!spitz_pxafb_dev)
|
|
return 0;
|
|
}
|
|
if (!get_hsync_time)
|
|
get_hsync_time = symbol_get(pxafb_get_hsync_time);
|
|
if (!get_hsync_time)
|
|
#endif
|
|
return 0;
|
|
|
|
return pxafb_get_hsync_time(spitz_pxafb_dev);
|
|
}
|
|
|
|
void spitz_put_hsync(void)
|
|
{
|
|
put_device(spitz_pxafb_dev);
|
|
if (get_hsync_time)
|
|
symbol_put(pxafb_get_hsync_time);
|
|
spitz_pxafb_dev = NULL;
|
|
get_hsync_time = NULL;
|
|
}
|
|
|
|
void spitz_wait_hsync(void)
|
|
{
|
|
sharpsl_wait_sync(SPITZ_GPIO_HSYNC);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Corgi/Spitz Backlight Power
|
|
*/
|
|
#ifdef CONFIG_PXA_SHARP_C7xx
|
|
void corgi_bl_set_intensity(int intensity)
|
|
{
|
|
if (intensity > 0x10)
|
|
intensity += 0x10;
|
|
|
|
/* Bits 0-4 are accessed via the SSP interface */
|
|
corgi_ssp_blduty_set(intensity & 0x1f);
|
|
|
|
/* Bit 5 is via SCOOP */
|
|
if (intensity & 0x0020)
|
|
set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
|
|
else
|
|
reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
|
|
}
|
|
#endif
|
|
|
|
|
|
#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
|
|
void spitz_bl_set_intensity(int intensity)
|
|
{
|
|
if (intensity > 0x10)
|
|
intensity += 0x10;
|
|
|
|
/* Bits 0-4 are accessed via the SSP interface */
|
|
corgi_ssp_blduty_set(intensity & 0x1f);
|
|
|
|
/* Bit 5 is via SCOOP */
|
|
if (intensity & 0x0020)
|
|
reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
|
|
else
|
|
set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
|
|
|
|
if (intensity)
|
|
set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
|
|
else
|
|
reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACH_AKITA
|
|
void akita_bl_set_intensity(int intensity)
|
|
{
|
|
if (intensity > 0x10)
|
|
intensity += 0x10;
|
|
|
|
/* Bits 0-4 are accessed via the SSP interface */
|
|
corgi_ssp_blduty_set(intensity & 0x1f);
|
|
|
|
/* Bit 5 is via IO-Expander */
|
|
if (intensity & 0x0020)
|
|
akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
|
|
else
|
|
akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
|
|
|
|
if (intensity)
|
|
akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
|
|
else
|
|
akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
|
|
}
|
|
#endif
|