WSL2-Linux-Kernel/arch/blackfin/mach-bf533/ints-priority.c

66 строки
2.5 KiB
C

/*
* File: arch/blackfin/mach-bf533/ints-priority.c
* Based on:
* Author: Michael Hennerich
*
* Created: ?
* Description: Set up the interrupt priorities
*
* Modified:
* Copyright 2004-2006 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/module.h>
#include <linux/irq.h>
#include <asm/blackfin.h>
void program_IAR(void)
{
/* Program the IAR0 Register with the configured priority */
bfin_write_SIC_IAR0(((CONFIG_PLLWAKE_ERROR - 7) << PLLWAKE_ERROR_POS) |
((CONFIG_DMA_ERROR - 7) << DMA_ERROR_POS) |
((CONFIG_PPI_ERROR - 7) << PPI_ERROR_POS) |
((CONFIG_SPORT0_ERROR - 7) << SPORT0_ERROR_POS) |
((CONFIG_SPI_ERROR - 7) << SPI_ERROR_POS) |
((CONFIG_SPORT1_ERROR - 7) << SPORT1_ERROR_POS) |
((CONFIG_UART_ERROR - 7) << UART_ERROR_POS) |
((CONFIG_RTC_ERROR - 7) << RTC_ERROR_POS));
bfin_write_SIC_IAR1(((CONFIG_DMA0_PPI - 7) << DMA0_PPI_POS) |
((CONFIG_DMA1_SPORT0RX - 7) << DMA1_SPORT0RX_POS) |
((CONFIG_DMA2_SPORT0TX - 7) << DMA2_SPORT0TX_POS) |
((CONFIG_DMA3_SPORT1RX - 7) << DMA3_SPORT1RX_POS) |
((CONFIG_DMA4_SPORT1TX - 7) << DMA4_SPORT1TX_POS) |
((CONFIG_DMA5_SPI - 7) << DMA5_SPI_POS) |
((CONFIG_DMA6_UARTRX - 7) << DMA6_UARTRX_POS) |
((CONFIG_DMA7_UARTTX - 7) << DMA7_UARTTX_POS));
bfin_write_SIC_IAR2(((CONFIG_TIMER0 - 7) << TIMER0_POS) |
((CONFIG_TIMER1 - 7) << TIMER1_POS) |
((CONFIG_TIMER2 - 7) << TIMER2_POS) |
((CONFIG_PFA - 7) << PFA_POS) |
((CONFIG_PFB - 7) << PFB_POS) |
((CONFIG_MEMDMA0 - 7) << MEMDMA0_POS) |
((CONFIG_MEMDMA1 - 7) << MEMDMA1_POS) |
((CONFIG_WDTIMER - 7) << WDTIMER_POS));
SSYNC();
}