WSL2-Linux-Kernel/drivers/usb
Jack Pham e8f55b9148 usb: host: ehci-msm: Fix register initialization
The default value for the 'transceiver select' field of
the PORTSC register may not always be correct. Previously
the phy-msm-usb driver would do this for us, but since
ehci-msm can now be instantiated standalone without any PHY
driver, the register needs to be explicitly initialized to
ULPI mode to properly communicate with the PHY.

This is not readily apparent, as firmware or bootloader code
also happen to pre-initialize this for us. However, it can
manifest when performing a driver unbind/rebind as follows:

 cd /sys/bus/platform/drivers/msm_hsusb_host
 echo QCOM8040:00 > unbind
 echo QCOM8040:00 > bind

The EHCI core executes a controller reset as part of this,
and as a result the register in question would revert to
its default state and must be re-initialized properly.
Furthermore this may be useful in the future when adding
PM suspend/resume support.

Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24 20:51:18 -08:00
..
atm USB: atm: cxacru: fix blank line after declaration 2015-07-22 14:55:22 -07:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild 2016-01-20 09:45:43 -08:00
class USB: cdc_acm: Ignore Infineon Flash Loader utility 2015-11-23 10:31:05 +01:00
common usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices 2016-01-24 20:16:52 -08:00
core usb: core: use kbasename() instead of open-coded variant 2016-01-24 20:37:47 -08:00
dwc2 usb: dwc2: add shutdown callback to platform variant 2015-12-22 12:12:51 -06:00
dwc3 usb: dwc3: of-simple: fix build warning on !PM 2015-12-22 21:58:26 -06:00
early
gadget wrappers for ->i_mutex access 2016-01-22 18:04:28 -05:00
host usb: host: ehci-msm: Fix register initialization 2016-01-24 20:51:18 -08:00
image scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
isp1760 usb: isp1760: udc: add ep capabilities support 2015-08-04 12:26:55 -05:00
misc USB patches for 4.5-rc1 2016-01-13 09:26:40 -08:00
mon USB: usbmon: remove assignment from IS_ERR argument 2016-01-03 16:55:59 -08:00
musb usb: musb: core: call init and shutdown for the usb phy 2015-12-22 12:05:44 -06:00
phy usb: musb: core: Fix handling of the phy notifications 2015-12-16 10:07:28 -06:00
renesas_usbhs usb: renesas_usbhs: constify usbhs_pkt_handle structures 2016-01-24 19:45:09 -08:00
serial USB-serial fixes for v4.4-rc8 2016-01-03 15:19:12 -08:00
storage Merge 4.4-rc5 into usb-next as we want those fixes here for testing 2015-12-13 19:20:27 -08:00
usbip usbip: vhci_hcd: at unlink, return -EIDRM if vhci_rx took the urb 2015-10-04 10:59:03 +01:00
wusbcore wusbcore: rh: use USB_DT_HUB 2015-04-03 19:03:15 +02:00
Kconfig usb: isp1760: Move driver from drivers/usb/host/ to drivers/usb/isp1760/ 2015-01-27 09:39:38 -06:00
Makefile usb-host: Remove fusbh200 driver 2015-10-16 23:44:33 -07:00
README usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
usb-skeleton.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.