microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/ata
История
Suman Tripathi 0babe614b6 ahci_xgene: Fix the link down in first attempt for the APM X-Gene SoC AHCI SATA host controller driver. 
Due to HW errata the APM X-Gene AHCI SATA host controller reports link
down even if the device presence is detected. This issue is due to speed
negotiation failure. This patch implements the algorithm to retry the
COMRESET if PxSTAT register reports device presence detected but
PHY communication not established. The maximum retry attempts are 3.

This patch also fixes the code to match the algorithm for the printing
a warning message if the disparity error still exists after link up.

Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
 		2014-09-06 11:27:15 +09:00
..
Kconfig libata: Use glob_match from lib/glob.c 2014-08-06 18:01:25 -07:00
Makefile ata: Add support for the Tegra124 SATA controller 2014-07-18 17:52:33 -04:00
acard-ahci.c ata: libahci_platform: move port_map parameters into the AHCI structure 2014-07-30 15:39:46 -04:00
ahci.c ahci: add pcid for Marvel 0x9182 controller 2014-09-06 02:52:41 +09:00
ahci.h ata: libahci: allow to use multiple PHYs 2014-07-30 15:39:46 -04:00
ahci_da850.c ata: libahci_platform: move port_map parameters into the AHCI structure 2014-07-30 15:39:46 -04:00
ahci_imx.c ata: libahci_platform: move port_map parameters into the AHCI structure 2014-07-30 15:39:46 -04:00
ahci_mvebu.c ata: libahci_platform: move port_map parameters into the AHCI structure 2014-07-30 15:39:46 -04:00
ahci_platform.c ata: ahci_platform: add a generic AHCI compatible 2014-07-30 15:39:46 -04:00
ahci_st.c ata: libahci_platform: move port_map parameters into the AHCI structure 2014-07-30 15:39:46 -04:00
ahci_sunxi.c ata: libahci_platform: move port_map parameters into the AHCI structure 2014-07-30 15:39:46 -04:00
ahci_tegra.c ata: ahci_tegra: Read calibration fuse 2014-08-26 10:48:27 -04:00
ahci_xgene.c ahci_xgene: Fix the link down in first attempt for the APM X-Gene SoC AHCI SATA host controller driver. 2014-09-06 11:27:15 +09:00
ata_generic.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
ata_piix.c ata_piix: Add Device IDs for Intel 9 Series PCH 2014-08-28 08:53:40 -04:00
libahci.c ata: libahci_platform: move port_map parameters into the AHCI structure 2014-07-30 15:39:46 -04:00
libahci_platform.c ata: libahci: Silence compiler warning on 64-bit 2014-08-01 11:18:53 -04:00
libata-acpi.c ACPI and power management updates for 3.15-rc1 2014-04-01 12:48:54 -07:00
libata-core.c libata: widen Crucial M550 blacklist matching 2014-08-18 17:40:09 -04:00
libata-eh.c libata: EH should handle AMNF error condition as a media error 2014-07-15 11:13:57 -04:00
libata-pmp.c ata: enable quirk from jmicron JMB350 for JMB394 2014-01-31 07:05:44 -05:00
libata-scsi.c scsi: use 64-bit LUNs 2014-07-17 22:07:37 +02:00
libata-sff.c libata-sff: remove dead code 2014-05-04 15:01:42 -04:00
libata-transport.c
…
libata-transport.h
…
libata-zpodd.c libata: zpodd: eliminate odd_can_poweroff 2014-03-14 11:23:47 -04:00
libata.h scsi: use 64-bit LUNs 2014-07-17 22:07:37 +02:00
pata_acpi.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ali.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_amd.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_arasan_cf.c pata_arasan_cf: fix ata_host_activate() failure handling 2014-04-14 13:50:03 -04:00
pata_artop.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_at32.c
…
pata_at91.c pata_at91: fix ata_host_activate() failure handling 2014-04-02 13:17:31 -04:00
pata_atiixp.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_atp867x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_bf54x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cmd64x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cmd640.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cs5520.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cs5530.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cs5535.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cs5536.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cypress.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_efar.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ep93xx.c drivers/ata/pata_ep93xx.c: use signed int type for result of platform_get_irq() 2014-07-17 08:36:13 -04:00
pata_hpt3x2n.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_hpt3x3.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_hpt37x.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_hpt366.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_icside.c
…
pata_imx.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_isapnp.c
…
pata_it821x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_it8213.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ixp4xx_cf.c
…
pata_jmicron.c ata: Disabling the async PM for JMicron chip 363/361 2014-09-01 08:38:06 -04:00
pata_legacy.c pata_legacy: Remove dead code 2014-03-11 08:30:53 -04:00
pata_macio.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_marvell.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_mpc52xx.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_mpiix.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_netcell.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ninja32.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ns87410.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ns87415.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_octeon_cf.c pata_octeon_cf: use devm_kzalloc() to allocate cf_port 2014-04-14 13:33:28 -04:00
pata_of_platform.c
…
pata_oldpiix.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_opti.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_optidma.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_palmld.c
…
pata_pcmcia.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_pdc202xx_old.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_pdc2027x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_piccolo.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_platform.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_pxa.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_radisys.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_rb532_cf.c
…
pata_rdc.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_rz1000.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_samsung_cf.c pata_samsung_cf: change ret type to signed 2014-08-17 07:24:48 -04:00
pata_sc1200.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_scc.c pata_scc: propagate return value of scc_wait_after_reset 2014-08-18 09:15:21 -04:00
pata_sch.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_serverworks.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_sil680.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_sis.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_sl82c105.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_triflex.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_via.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pdc_adma.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sata_dwc_460ex.c ata: remove superfluous casts 2014-03-26 12:36:53 -04:00
sata_fsl.c ata: Use dma_zalloc_coherent 2014-06-17 10:23:26 -04:00
sata_highbank.c ata: libahci_platform: move port_map parameters into the AHCI structure 2014-07-30 15:39:46 -04:00
sata_inic162x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
sata_mv.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
sata_nv.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
sata_promise.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sata_promise.h
…
sata_qstor.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sata_rcar.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
sata_sil.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
sata_sil24.c sata_sil24: Identify which card suffered IRQ status error 2014-07-22 10:08:31 -04:00
sata_sis.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
sata_svw.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sata_sx4.c ata: remove superfluous casts 2014-03-26 12:36:53 -04:00
sata_uli.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sata_via.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
sata_vsc.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sis.h
…