WSL2-Linux-Kernel/arch/arm64/boot/dts/amlogic
Linus Torvalds 854e80bcfd ARM: devicetree updates for v5.7
Most of the commits are for additional hardware support and minor fixes
 for existing machines for all the usual platforms: qcom, amlogic, at91,
 gemini, mediatek, ti, socfpga, i.mx, layerscape, uniphier, rockchip,
 exynos, ux500, mvebu, tegra, stm32, renesas, sunxi, broadcom, omap,
 and versatile.
 
 The conversion of binding files to machine-readable yaml format
 continues, along with fixes found during the validation.
 Andre Przywara takes over maintainership for the old Calxeda Highbank
 platform and provides a number of updates.
 
 The OMAP2+ platforms see a continued move from platform data into
 dts files, for many devices that relied on a mix of auxiliary data
 in addition to the DT description
 
 A moderate number of new SoCs and machines are added, here is a full
 list:
 
 - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
   (SM8250) is the current high-end phone chip, and IPQ6018 is a new
   WiFi-6 router chip.
 
 - Mediatek MT8516 application processor SoC for voice assistants, along
   with the "pumpkin" development board
 
 - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
   evaluation board.
 
 - Kontron "sl28" board family based on NXP LS1028A
 
 - Eleven variations of the new i.MX6 TechNexion Pico board, combining
   the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
   SoM carriers
 
 - Three additional variants of the Toradex Colibri board family, all
   based on versions of the NXP i.MX7.
 
 - The Pinebook Pro laptop based on Rockchip RK3399
 
 - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based on
   the ST-Ericsson u8500 platform
 
 - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
   STMicroelectronics stm32mp157
 
 - Renesas M3ULCB starter kit for R-Car M3-W+
 
 - Hoperun HiHope development board with Renesas RZ/G2M
 
 - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner A64
 
 - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner A20
 
 - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl6HpMkACgkQmmx57+YA
 GNkGsQ/+KRbE74XGQvZww5PleaesqoZZhrt2gbi0pEJZ/JTgNa3dBkT+JwlToe/H
 x7nFVfMZeEl4O9GO0+/CH2tsmQa5BA8R9JddhFxwnZ48ZYLQAdaukwt94LM2zj3K
 GFgs47N4DAAF5QJoXNtmmQCXUWbj7A/0S5TTpXe94TYPN9XiJCdsyNNLpW3undTe
 K1HLnd4yWGforQc/VfRsV/Gsqi1VNHgL34M3belahiG7x0lytJDCHfhsfmIdxdGR
 n3LVRRJr6NhKcuUw3XtA8MxT4dTAcgHjbbDLkS/b1nHfuXMi0/zW8VPBzD/xyHL7
 fbFl8ayUMANB6FD/U7ptUC/0IMXuHDUn4B60CEEzK8ddkEbErrmXlYVGogpFHxvm
 MqrW8CnO0YEr0YMNAIyZoqHYGq8+8DCq+SRH48brdPzuiKI6OahdV1o07ulGhOjq
 ihwoZNE+J0NjeaX7C1xBX3DT1XqdcNPCmu3gx6r06u2FVXVm1J19YkIzQnEXQvKy
 NRIw5LIOfEsxkMSQ0oUuAUUUY1Fq1zuHqD8MmgBd3jqIULQqgfahmPL6Dtwm5QFf
 R17YsMcQ7ae1Pp7a+D3Jrkbn+s2y8wmJZIqH3eWebps9RvpWmrxzsRfOJ2czhqM1
 NY7Z/TGMM7lGM75DZ+xskfk7UCAX+hqMSTiNg9xbRo8946GAbV4=
 =ye2F
 -----END PGP SIGNATURE-----

Merge tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
 "Most of the commits are for additional hardware support and minor
  fixes for existing machines for all the usual platforms: qcom,
  amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape,
  uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas,
  sunxi, broadcom, omap, and versatile.

  The conversion of binding files to machine-readable yaml format
  continues, along with fixes found during the validation. Andre
  Przywara takes over maintainership for the old Calxeda Highbank
  platform and provides a number of updates.

  The OMAP2+ platforms see a continued move from platform data into dts
  files, for many devices that relied on a mix of auxiliary data in
  addition to the DT description

  A moderate number of new SoCs and machines are added, here is a full
  list:

   - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
     (SM8250) is the current high-end phone chip, and IPQ6018 is a new
     WiFi-6 router chip.

   - Mediatek MT8516 application processor SoC for voice assistants,
     along with the "pumpkin" development board

   - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
     evaluation board.

   - Kontron "sl28" board family based on NXP LS1028A

   - Eleven variations of the new i.MX6 TechNexion Pico board, combining
     the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
     SoM carriers

   - Three additional variants of the Toradex Colibri board family, all
     based on versions of the NXP i.MX7.

   - The Pinebook Pro laptop based on Rockchip RK3399

   - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based
     on the ST-Ericsson u8500 platform

   - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
     STMicroelectronics stm32mp157

   - Renesas M3ULCB starter kit for R-Car M3-W+

   - Hoperun HiHope development board with Renesas RZ/G2M

   - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner
     A64

   - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner
     A20

   - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13"

* tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits)
  ARM: dts: ux500: Fix missing node renames
  arm64: dts: Revert "specify console via command line"
  MAINTAINERS: Update Calxeda Highbank maintainership
  arm: dts: calxeda: Group port-phys and sgpio-gpio items
  arm: dts: calxeda: Fix interrupt grouping
  arm: dts: calxeda: Provide UART clock
  arm: dts: calxeda: Basic DT file fixes
  arm64: dts: specify console via command line
  ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node
  ARM: dts: gemini: Add thermal zone to DIR-685
  ARM: dts: gemini: Rename IDE nodes
  ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes
  arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes
  arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node
  arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC
  arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0
  arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC
  arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes
  arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node
  arm64: dts: khadas-vim3: add SPIFC controller node
  ...
2020-04-03 15:22:05 -07:00
..
Makefile arm64: dts: meson: add libretech-pc boards support 2019-12-16 11:34:52 -08:00
meson-a1-ad401.dts arm64: dts: add support for A1 based Amlogic AD401 2019-10-07 11:13:36 -07:00
meson-a1.dtsi arm64: dts: meson: a1: add secure power domain controller 2020-02-14 11:55:27 -08:00
meson-axg-s400.dts arm64: dts: meson: s400: fix sound card codec nodes 2020-02-29 09:34:15 -08:00
meson-axg.dtsi arm64: dts: meson: add audio fifo depths 2020-01-08 10:52:12 -08:00
meson-g12-common.dtsi arm64: dts: meson-g12: add the SPIFC nodes 2020-03-17 15:15:08 -07:00
meson-g12.dtsi arm64: dts: meson-g12: add the SPIFC nodes 2020-03-17 15:15:08 -07:00
meson-g12a-sei510.dts arm64: dts: meson-g12: split emmc pins to select 4 or 8 bus width 2020-03-17 15:14:44 -07:00
meson-g12a-u200.dts arm64: dts: meson-g12: split emmc pins to select 4 or 8 bus width 2020-03-17 15:14:44 -07:00
meson-g12a-x96-max.dts arm64: dts: meson-g12: split emmc pins to select 4 or 8 bus width 2020-03-17 15:14:44 -07:00
meson-g12a.dtsi arm64: dts: meson: g12a: add cooling properties 2019-10-17 09:12:51 -07:00
meson-g12b-a311d-khadas-vim3.dts arm64: dts: khadas-vim3: add commented support for PCIe 2019-10-03 08:43:04 -07:00
meson-g12b-a311d.dtsi arm64: dts: meson-g12b: support a311d and s922x cpu operating points 2019-08-09 11:07:14 -07:00
meson-g12b-khadas-vim3.dtsi arm64: dts: meson: khadas-vim3: move model to g12b-khadas-vim3 dtsi 2020-03-16 09:30:22 -07:00
meson-g12b-odroid-n2.dts arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node 2020-03-17 15:15:09 -07:00
meson-g12b-s922x-khadas-vim3.dts arm64: dts: khadas-vim3: add commented support for PCIe 2019-10-03 08:43:04 -07:00
meson-g12b-s922x.dtsi arm64: dts: meson-g12b: support a311d and s922x cpu operating points 2019-08-09 11:07:14 -07:00
meson-g12b-ugoos-am6.dts arm64: dts: meson-g12: split emmc pins to select 4 or 8 bus width 2020-03-17 15:14:44 -07:00
meson-g12b.dtsi arm64: dts: meson: g12b: add cooling properties 2019-10-17 09:13:00 -07:00
meson-gx-libretech-pc.dtsi arm64: dts: meson: add libretech-pc boards support 2019-12-16 11:34:52 -08:00
meson-gx-p23x-q20x.dtsi arm64: dts: meson-gx-p23x-q20x: add keep-power-in-suspend property in SDIO node 2019-10-03 08:43:01 -07:00
meson-gx.dtsi arm64: dts: meson: add thermal zones to meson gx devices 2020-03-16 09:49:36 -07:00
meson-gxbb-kii-pro.dts media: arm64: dts: amlogic: add rc-videostrong-kii-pro keymap 2020-03-02 10:47:40 +01:00
meson-gxbb-nanopi-k2.dts arm64: dts: meson-gxbb-nanopi-k2: add keep-power-in-suspend property in SDIO node 2019-10-03 08:43:02 -07:00
meson-gxbb-nexbox-a95x.dts arm64: dts: meson-gxbb-nexbox-a95x: add keep-power-in-suspend property in SDIO node 2019-10-03 08:43:02 -07:00
meson-gxbb-odroidc2.dts arm64: dts: meson-gxbb-odroid-c2: add rc-odroid ir keymap 2020-02-29 09:37:46 -08:00
meson-gxbb-p20x.dtsi arm64: dts: meson-gxbb-p20x: add keep-power-in-suspend property in SDIO node 2019-10-03 08:43:02 -07:00
meson-gxbb-p200.dts arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings 2019-06-19 20:34:14 -07:00
meson-gxbb-p201.dts arm64: dts: meson-gxbb-p201: fix snps, reset-delays-us format 2019-08-29 16:13:35 -07:00
meson-gxbb-vega-s95-meta.dts ARM64: dts: amlogic: Convert to new-style SPDX license identifiers 2018-03-07 17:21:58 -08:00
meson-gxbb-vega-s95-pro.dts ARM64: dts: amlogic: Convert to new-style SPDX license identifiers 2018-03-07 17:21:58 -08:00
meson-gxbb-vega-s95-telos.dts ARM64: dts: amlogic: Convert to new-style SPDX license identifiers 2018-03-07 17:21:58 -08:00
meson-gxbb-vega-s95.dtsi arm64: dts: meson-gxbb-vega-s95: fix bluetooth node 2020-02-29 09:37:46 -08:00
meson-gxbb-wetek-hub.dts arm64: dts: meson-gxbb-wetek-hub: add rc-wetek-hub keymap 2019-08-29 16:17:41 -07:00
meson-gxbb-wetek-play2.dts arm64: dts: meson-gxbb-wetek-play2: add rc-wetek-play2 keymap 2019-08-29 16:17:41 -07:00
meson-gxbb-wetek.dtsi arm64: dts: meson-gxbb-wetek: add keep-power-in-suspend property in SDIO node 2019-10-03 08:43:02 -07:00
meson-gxbb.dtsi arm64: dts: meson: add video decoder entries 2019-08-09 11:07:14 -07:00
meson-gxl-mali.dtsi ARM64: dts: meson-gxl: fix Mali GPU compatible string 2018-06-27 16:48:25 -07:00
meson-gxl-s805x-libretech-ac.dts arm64: dts: meson: libretech-ac: update model description 2019-10-07 11:13:38 -07:00
meson-gxl-s805x-p241.dts arm64: dts: meson-gxl-s805x-p241: add keep-power-in-suspend property in SDIO node 2019-10-03 08:43:02 -07:00
meson-gxl-s905d-libretech-pc.dts arm64: dts: meson: add libretech-pc boards support 2019-12-16 11:34:52 -08:00
meson-gxl-s905d-p230.dts arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings 2019-06-19 20:34:14 -07:00
meson-gxl-s905d-p231.dts ARM64: dts: meson-gx-p23x-q20x: move the wifi node to each board's .dts 2018-07-20 08:18:22 -07:00
meson-gxl-s905d-phicomm-n1.dts arm64: dts: meson-gxl-s905d-phicomm-n1: add status LED 2019-03-18 09:07:15 -07:00
meson-gxl-s905d.dtsi ARM64: dts: amlogic: Convert to new-style SPDX license identifiers 2018-03-07 17:21:58 -08:00
meson-gxl-s905w-p281.dts ARM64: dts: meson-gxl: add support for the S905W SoC and the P281 board 2018-07-20 09:02:22 -07:00
meson-gxl-s905w-tx3-mini.dts arm64: dts: meson-gxl-s905w-tx3-mini: add rc-tx3mini keymap 2019-08-29 16:17:42 -07:00
meson-gxl-s905x-hwacom-amazetv.dts arm64: dts: meson: fix boards regulators states format 2019-08-29 16:13:35 -07:00
meson-gxl-s905x-khadas-vim.dts arm64: dts: meson-gxl-s905x-khadas-vim: fix uart_A bluetooth node 2019-10-07 11:13:38 -07:00
meson-gxl-s905x-libretech-cc.dts arm64: dts: meson: libretech-cc: update model and compatible 2019-10-07 11:13:38 -07:00
meson-gxl-s905x-nexbox-a95x.dts arm64: dts: meson-gxl-s905x-nexbox-a95x: add keep-power-in-suspend property in SDIO node 2019-10-03 08:43:03 -07:00
meson-gxl-s905x-p212.dts arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply 2018-11-29 12:29:56 -08:00
meson-gxl-s905x-p212.dtsi arm64: dts: meson-gxl-s905x-p212: add bluetooth nodes 2020-02-29 09:37:46 -08:00
meson-gxl-s905x.dtsi ARM64: dts: amlogic: Convert to new-style SPDX license identifiers 2018-03-07 17:21:58 -08:00
meson-gxl.dtsi arm64: dts: meson: gxl: add i2c C pins 2019-12-16 11:34:05 -08:00
meson-gxm-khadas-vim2.dts arm64: dts: meson: add thermal zones to meson gx devices 2020-03-16 09:49:36 -07:00
meson-gxm-nexbox-a1.dts arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings 2019-06-19 20:34:14 -07:00
meson-gxm-q200.dts arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings 2019-06-19 20:34:14 -07:00
meson-gxm-q201.dts ARM64: dts: meson-gx-p23x-q20x: move the wifi node to each board's .dts 2018-07-20 08:18:22 -07:00
meson-gxm-rbox-pro.dts arm64: dts: meson-gxm-rbox-pro: add keep-power-in-suspend property in SDIO node 2019-10-03 08:43:03 -07:00
meson-gxm-s912-libretech-pc.dts arm64: dts: meson: add libretech-pc boards support 2019-12-16 11:34:52 -08:00
meson-gxm-vega-s96.dts arm64: dts: meson-gxm-vega-s96: set rc-vega-s9x ir keymap 2019-10-17 09:13:08 -07:00
meson-gxm.dtsi arm64: dts: meson: add thermal zones to meson gx devices 2020-03-16 09:49:36 -07:00
meson-khadas-vim3.dtsi arm64: dts: khadas-vim3: add SPIFC controller node 2020-03-17 15:15:08 -07:00
meson-sm1-khadas-vim3l.dts arm64: dts: khadas-vim3: add commented support for PCIe 2019-10-03 08:43:04 -07:00
meson-sm1-sei610.dts ARM: devicetree updates for v5.7 2020-04-03 15:22:05 -07:00
meson-sm1.dtsi arm64: dts: meson: add pdm reset line 2020-02-29 09:34:14 -08:00