286 строки
6.8 KiB
C
286 строки
6.8 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/thermal.h>
|
|
#include "tsens.h"
|
|
|
|
#define CONFIG_ADDR 0x3640
|
|
#define CONFIG_ADDR_8660 0x3620
|
|
/* CONFIG_ADDR bitmasks */
|
|
#define CONFIG 0x9b
|
|
#define CONFIG_MASK 0xf
|
|
#define CONFIG_8660 1
|
|
#define CONFIG_SHIFT_8660 28
|
|
#define CONFIG_MASK_8660 (3 << CONFIG_SHIFT_8660)
|
|
|
|
#define CNTL_ADDR 0x3620
|
|
/* CNTL_ADDR bitmasks */
|
|
#define EN BIT(0)
|
|
#define SW_RST BIT(1)
|
|
|
|
#define MEASURE_PERIOD BIT(18)
|
|
#define SLP_CLK_ENA BIT(26)
|
|
#define SLP_CLK_ENA_8660 BIT(24)
|
|
#define SENSOR0_SHIFT 3
|
|
|
|
#define THRESHOLD_ADDR 0x3624
|
|
|
|
#define INT_STATUS_ADDR 0x363c
|
|
|
|
#define S0_STATUS_OFF 0x3628
|
|
#define S1_STATUS_OFF 0x362c
|
|
#define S2_STATUS_OFF 0x3630
|
|
#define S3_STATUS_OFF 0x3634
|
|
#define S4_STATUS_OFF 0x3638
|
|
#define S5_STATUS_OFF 0x3664 /* Sensors 5-10 found on apq8064/msm8960 */
|
|
#define S6_STATUS_OFF 0x3668
|
|
#define S7_STATUS_OFF 0x366c
|
|
#define S8_STATUS_OFF 0x3670
|
|
#define S9_STATUS_OFF 0x3674
|
|
#define S10_STATUS_OFF 0x3678
|
|
|
|
/* Original slope - 350 to compensate mC to C inaccuracy */
|
|
static u32 tsens_msm8960_slope[] = {
|
|
826, 826, 804, 826,
|
|
761, 782, 782, 849,
|
|
782, 849, 782
|
|
};
|
|
|
|
static int suspend_8960(struct tsens_priv *priv)
|
|
{
|
|
int ret;
|
|
unsigned int mask;
|
|
struct regmap *map = priv->tm_map;
|
|
|
|
ret = regmap_read(map, THRESHOLD_ADDR, &priv->ctx.threshold);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_read(map, CNTL_ADDR, &priv->ctx.control);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (priv->num_sensors > 1)
|
|
mask = SLP_CLK_ENA | EN;
|
|
else
|
|
mask = SLP_CLK_ENA_8660 | EN;
|
|
|
|
ret = regmap_update_bits(map, CNTL_ADDR, mask, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int resume_8960(struct tsens_priv *priv)
|
|
{
|
|
int ret;
|
|
struct regmap *map = priv->tm_map;
|
|
|
|
ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Separate CONFIG restore is not needed only for 8660 as
|
|
* config is part of CTRL Addr and its restored as such
|
|
*/
|
|
if (priv->num_sensors > 1) {
|
|
ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(map, THRESHOLD_ADDR, priv->ctx.threshold);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write(map, CNTL_ADDR, priv->ctx.control);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int enable_8960(struct tsens_priv *priv, int id)
|
|
{
|
|
int ret;
|
|
u32 reg, mask = BIT(id);
|
|
|
|
ret = regmap_read(priv->tm_map, CNTL_ADDR, ®);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* HARDWARE BUG:
|
|
* On platforms with more than 6 sensors, all remaining sensors
|
|
* must be enabled together, otherwise undefined results are expected.
|
|
* (Sensor 6-7 disabled, Sensor 3 disabled...) In the original driver,
|
|
* all the sensors are enabled in one step hence this bug is not
|
|
* triggered.
|
|
*/
|
|
if (id > 5)
|
|
mask = GENMASK(10, 6);
|
|
|
|
mask <<= SENSOR0_SHIFT;
|
|
|
|
/* Sensors already enabled. Skip. */
|
|
if ((reg & mask) == mask)
|
|
return 0;
|
|
|
|
ret = regmap_write(priv->tm_map, CNTL_ADDR, reg | SW_RST);
|
|
if (ret)
|
|
return ret;
|
|
|
|
reg |= MEASURE_PERIOD;
|
|
|
|
if (priv->num_sensors > 1)
|
|
reg |= mask | SLP_CLK_ENA | EN;
|
|
else
|
|
reg |= mask | SLP_CLK_ENA_8660 | EN;
|
|
|
|
ret = regmap_write(priv->tm_map, CNTL_ADDR, reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void disable_8960(struct tsens_priv *priv)
|
|
{
|
|
int ret;
|
|
u32 reg_cntl;
|
|
u32 mask;
|
|
|
|
mask = GENMASK(priv->num_sensors - 1, 0);
|
|
mask <<= SENSOR0_SHIFT;
|
|
mask |= EN;
|
|
|
|
ret = regmap_read(priv->tm_map, CNTL_ADDR, ®_cntl);
|
|
if (ret)
|
|
return;
|
|
|
|
reg_cntl &= ~mask;
|
|
|
|
if (priv->num_sensors > 1)
|
|
reg_cntl &= ~SLP_CLK_ENA;
|
|
else
|
|
reg_cntl &= ~SLP_CLK_ENA_8660;
|
|
|
|
regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
|
|
}
|
|
|
|
static int calibrate_8960(struct tsens_priv *priv)
|
|
{
|
|
int i;
|
|
char *data;
|
|
u32 p1[11];
|
|
|
|
data = qfprom_read(priv->dev, "calib");
|
|
if (IS_ERR(data))
|
|
data = qfprom_read(priv->dev, "calib_backup");
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
for (i = 0; i < priv->num_sensors; i++) {
|
|
p1[i] = data[i];
|
|
priv->sensor[i].slope = tsens_msm8960_slope[i];
|
|
}
|
|
|
|
compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB);
|
|
|
|
kfree(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = {
|
|
/* ----- SROT ------ */
|
|
/* No VERSION information */
|
|
|
|
/* CNTL */
|
|
[TSENS_EN] = REG_FIELD(CNTL_ADDR, 0, 0),
|
|
[TSENS_SW_RST] = REG_FIELD(CNTL_ADDR, 1, 1),
|
|
/* 8960 has 5 sensors, 8660 has 11, we only handle 5 */
|
|
[SENSOR_EN] = REG_FIELD(CNTL_ADDR, 3, 7),
|
|
|
|
/* ----- TM ------ */
|
|
/* INTERRUPT ENABLE */
|
|
/* NO INTERRUPT ENABLE */
|
|
|
|
/* Single UPPER/LOWER TEMPERATURE THRESHOLD for all sensors */
|
|
[LOW_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 0, 7),
|
|
[UP_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 8, 15),
|
|
/* MIN_THRESH_0 and MAX_THRESH_0 are not present in the regfield
|
|
* Recycle CRIT_THRESH_0 and 1 to set the required regs to hardcoded temp
|
|
* MIN_THRESH_0 -> CRIT_THRESH_1
|
|
* MAX_THRESH_0 -> CRIT_THRESH_0
|
|
*/
|
|
[CRIT_THRESH_1] = REG_FIELD(THRESHOLD_ADDR, 16, 23),
|
|
[CRIT_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 24, 31),
|
|
|
|
/* UPPER/LOWER INTERRUPT [CLEAR/STATUS] */
|
|
/* 1 == clear, 0 == normal operation */
|
|
[LOW_INT_CLEAR_0] = REG_FIELD(CNTL_ADDR, 9, 9),
|
|
[UP_INT_CLEAR_0] = REG_FIELD(CNTL_ADDR, 10, 10),
|
|
|
|
/* NO CRITICAL INTERRUPT SUPPORT on 8960 */
|
|
|
|
/* Sn_STATUS */
|
|
[LAST_TEMP_0] = REG_FIELD(S0_STATUS_OFF, 0, 7),
|
|
[LAST_TEMP_1] = REG_FIELD(S1_STATUS_OFF, 0, 7),
|
|
[LAST_TEMP_2] = REG_FIELD(S2_STATUS_OFF, 0, 7),
|
|
[LAST_TEMP_3] = REG_FIELD(S3_STATUS_OFF, 0, 7),
|
|
[LAST_TEMP_4] = REG_FIELD(S4_STATUS_OFF, 0, 7),
|
|
[LAST_TEMP_5] = REG_FIELD(S5_STATUS_OFF, 0, 7),
|
|
[LAST_TEMP_6] = REG_FIELD(S6_STATUS_OFF, 0, 7),
|
|
[LAST_TEMP_7] = REG_FIELD(S7_STATUS_OFF, 0, 7),
|
|
[LAST_TEMP_8] = REG_FIELD(S8_STATUS_OFF, 0, 7),
|
|
[LAST_TEMP_9] = REG_FIELD(S9_STATUS_OFF, 0, 7),
|
|
[LAST_TEMP_10] = REG_FIELD(S10_STATUS_OFF, 0, 7),
|
|
|
|
/* No VALID field on 8960 */
|
|
/* TSENS_INT_STATUS bits: 1 == threshold violated */
|
|
[MIN_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 0, 0),
|
|
[LOWER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 1, 1),
|
|
[UPPER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 2, 2),
|
|
/* No CRITICAL field on 8960 */
|
|
[MAX_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 3, 3),
|
|
|
|
/* TRDY: 1=ready, 0=in progress */
|
|
[TRDY] = REG_FIELD(INT_STATUS_ADDR, 7, 7),
|
|
};
|
|
|
|
static const struct tsens_ops ops_8960 = {
|
|
.init = init_common,
|
|
.calibrate = calibrate_8960,
|
|
.get_temp = get_temp_common,
|
|
.enable = enable_8960,
|
|
.disable = disable_8960,
|
|
.suspend = suspend_8960,
|
|
.resume = resume_8960,
|
|
};
|
|
|
|
static struct tsens_features tsens_8960_feat = {
|
|
.ver_major = VER_0,
|
|
.crit_int = 0,
|
|
.combo_int = 0,
|
|
.adc = 1,
|
|
.srot_split = 0,
|
|
.max_sensors = 11,
|
|
.trip_min_temp = -40000,
|
|
.trip_max_temp = 120000,
|
|
};
|
|
|
|
struct tsens_plat_data data_8960 = {
|
|
.num_sensors = 11,
|
|
.ops = &ops_8960,
|
|
.feat = &tsens_8960_feat,
|
|
.fields = tsens_8960_regfields,
|
|
};
|