697 строки
17 KiB
C
697 строки
17 KiB
C
/*
|
|
* Renesas - AP-325RXA
|
|
* (Compatible with Algo System ., LTD. - AP-320A)
|
|
*
|
|
* Copyright (C) 2008 Renesas Solutions Corp.
|
|
* Author : Yusuke Goda <goda.yuske@renesas.com>
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/sh_mobile_sdhi.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mtd/sh_flctl.h>
|
|
#include <linux/mfd/tmio.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/smsc911x.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/sh_intc.h>
|
|
#include <media/ov772x.h>
|
|
#include <media/soc_camera.h>
|
|
#include <media/soc_camera_platform.h>
|
|
#include <media/sh_mobile_ceu.h>
|
|
#include <video/sh_mobile_lcdc.h>
|
|
#include <asm/io.h>
|
|
#include <asm/clock.h>
|
|
#include <asm/suspend.h>
|
|
#include <cpu/sh7723.h>
|
|
|
|
/* Dummy supplies, where voltage doesn't matter */
|
|
static struct regulator_consumer_supply dummy_supplies[] = {
|
|
REGULATOR_SUPPLY("vddvario", "smsc911x"),
|
|
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
|
|
};
|
|
|
|
static struct smsc911x_platform_config smsc911x_config = {
|
|
.phy_interface = PHY_INTERFACE_MODE_MII,
|
|
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
|
|
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
|
|
.flags = SMSC911X_USE_32BIT,
|
|
};
|
|
|
|
static struct resource smsc9118_resources[] = {
|
|
[0] = {
|
|
.start = 0xb6080000,
|
|
.end = 0xb60fffff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = evt2irq(0x660),
|
|
.end = evt2irq(0x660),
|
|
.flags = IORESOURCE_IRQ,
|
|
}
|
|
};
|
|
|
|
static struct platform_device smsc9118_device = {
|
|
.name = "smsc911x",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(smsc9118_resources),
|
|
.resource = smsc9118_resources,
|
|
.dev = {
|
|
.platform_data = &smsc911x_config,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* AP320 and AP325RXA has CPLD data in NOR Flash(0xA80000-0xABFFFF).
|
|
* If this area erased, this board can not boot.
|
|
*/
|
|
static struct mtd_partition ap325rxa_nor_flash_partitions[] = {
|
|
{
|
|
.name = "uboot",
|
|
.offset = 0,
|
|
.size = (1 * 1024 * 1024),
|
|
.mask_flags = MTD_WRITEABLE, /* Read-only */
|
|
}, {
|
|
.name = "kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = (2 * 1024 * 1024),
|
|
}, {
|
|
.name = "free-area0",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = ((7 * 1024 * 1024) + (512 * 1024)),
|
|
}, {
|
|
.name = "CPLD-Data",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.mask_flags = MTD_WRITEABLE, /* Read-only */
|
|
.size = (1024 * 128 * 2),
|
|
}, {
|
|
.name = "free-area1",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
},
|
|
};
|
|
|
|
static struct physmap_flash_data ap325rxa_nor_flash_data = {
|
|
.width = 2,
|
|
.parts = ap325rxa_nor_flash_partitions,
|
|
.nr_parts = ARRAY_SIZE(ap325rxa_nor_flash_partitions),
|
|
};
|
|
|
|
static struct resource ap325rxa_nor_flash_resources[] = {
|
|
[0] = {
|
|
.name = "NOR Flash",
|
|
.start = 0x00000000,
|
|
.end = 0x00ffffff,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device ap325rxa_nor_flash_device = {
|
|
.name = "physmap-flash",
|
|
.resource = ap325rxa_nor_flash_resources,
|
|
.num_resources = ARRAY_SIZE(ap325rxa_nor_flash_resources),
|
|
.dev = {
|
|
.platform_data = &ap325rxa_nor_flash_data,
|
|
},
|
|
};
|
|
|
|
static struct mtd_partition nand_partition_info[] = {
|
|
{
|
|
.name = "nand_data",
|
|
.offset = 0,
|
|
.size = MTDPART_SIZ_FULL,
|
|
},
|
|
};
|
|
|
|
static struct resource nand_flash_resources[] = {
|
|
[0] = {
|
|
.start = 0xa4530000,
|
|
.end = 0xa45300ff,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct sh_flctl_platform_data nand_flash_data = {
|
|
.parts = nand_partition_info,
|
|
.nr_parts = ARRAY_SIZE(nand_partition_info),
|
|
.flcmncr_val = FCKSEL_E | TYPESEL_SET | NANWF_E,
|
|
.has_hwecc = 1,
|
|
};
|
|
|
|
static struct platform_device nand_flash_device = {
|
|
.name = "sh_flctl",
|
|
.resource = nand_flash_resources,
|
|
.num_resources = ARRAY_SIZE(nand_flash_resources),
|
|
.dev = {
|
|
.platform_data = &nand_flash_data,
|
|
},
|
|
};
|
|
|
|
#define FPGA_LCDREG 0xB4100180
|
|
#define FPGA_BKLREG 0xB4100212
|
|
#define FPGA_LCDREG_VAL 0x0018
|
|
#define PORT_MSELCRB 0xA4050182
|
|
#define PORT_HIZCRC 0xA405015C
|
|
#define PORT_DRVCRA 0xA405018A
|
|
#define PORT_DRVCRB 0xA405018C
|
|
|
|
static int ap320_wvga_set_brightness(int brightness)
|
|
{
|
|
if (brightness) {
|
|
gpio_set_value(GPIO_PTS3, 0);
|
|
__raw_writew(0x100, FPGA_BKLREG);
|
|
} else {
|
|
__raw_writew(0, FPGA_BKLREG);
|
|
gpio_set_value(GPIO_PTS3, 1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ap320_wvga_power_on(void)
|
|
{
|
|
msleep(100);
|
|
|
|
/* ASD AP-320/325 LCD ON */
|
|
__raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG);
|
|
}
|
|
|
|
static void ap320_wvga_power_off(void)
|
|
{
|
|
/* ASD AP-320/325 LCD OFF */
|
|
__raw_writew(0, FPGA_LCDREG);
|
|
}
|
|
|
|
static const struct fb_videomode ap325rxa_lcdc_modes[] = {
|
|
{
|
|
.name = "LB070WV1",
|
|
.xres = 800,
|
|
.yres = 480,
|
|
.left_margin = 32,
|
|
.right_margin = 160,
|
|
.hsync_len = 8,
|
|
.upper_margin = 63,
|
|
.lower_margin = 80,
|
|
.vsync_len = 1,
|
|
.sync = 0, /* hsync and vsync are active low */
|
|
},
|
|
};
|
|
|
|
static struct sh_mobile_lcdc_info lcdc_info = {
|
|
.clock_source = LCDC_CLK_EXTERNAL,
|
|
.ch[0] = {
|
|
.chan = LCDC_CHAN_MAINLCD,
|
|
.fourcc = V4L2_PIX_FMT_RGB565,
|
|
.interface_type = RGB18,
|
|
.clock_divider = 1,
|
|
.lcd_modes = ap325rxa_lcdc_modes,
|
|
.num_modes = ARRAY_SIZE(ap325rxa_lcdc_modes),
|
|
.panel_cfg = {
|
|
.width = 152, /* 7.0 inch */
|
|
.height = 91,
|
|
.display_on = ap320_wvga_power_on,
|
|
.display_off = ap320_wvga_power_off,
|
|
},
|
|
.bl_info = {
|
|
.name = "sh_mobile_lcdc_bl",
|
|
.max_brightness = 1,
|
|
.set_brightness = ap320_wvga_set_brightness,
|
|
},
|
|
}
|
|
};
|
|
|
|
static struct resource lcdc_resources[] = {
|
|
[0] = {
|
|
.name = "LCDC",
|
|
.start = 0xfe940000, /* P4-only space */
|
|
.end = 0xfe942fff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = evt2irq(0x580),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device lcdc_device = {
|
|
.name = "sh_mobile_lcdc_fb",
|
|
.num_resources = ARRAY_SIZE(lcdc_resources),
|
|
.resource = lcdc_resources,
|
|
.dev = {
|
|
.platform_data = &lcdc_info,
|
|
},
|
|
};
|
|
|
|
static void camera_power(int val)
|
|
{
|
|
gpio_set_value(GPIO_PTZ5, val); /* RST_CAM/RSTB */
|
|
mdelay(10);
|
|
}
|
|
|
|
#ifdef CONFIG_I2C
|
|
/* support for the old ncm03j camera */
|
|
static unsigned char camera_ncm03j_magic[] =
|
|
{
|
|
0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
|
|
0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36,
|
|
0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F,
|
|
0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55,
|
|
0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12,
|
|
0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0,
|
|
0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F,
|
|
0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A,
|
|
0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A,
|
|
0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A,
|
|
0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56,
|
|
0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37,
|
|
0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A,
|
|
0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56,
|
|
0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC,
|
|
0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
|
|
};
|
|
|
|
static int camera_probe(void)
|
|
{
|
|
struct i2c_adapter *a = i2c_get_adapter(0);
|
|
struct i2c_msg msg;
|
|
int ret;
|
|
|
|
if (!a)
|
|
return -ENODEV;
|
|
|
|
camera_power(1);
|
|
msg.addr = 0x6e;
|
|
msg.buf = camera_ncm03j_magic;
|
|
msg.len = 2;
|
|
msg.flags = 0;
|
|
ret = i2c_transfer(a, &msg, 1);
|
|
camera_power(0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int camera_set_capture(struct soc_camera_platform_info *info,
|
|
int enable)
|
|
{
|
|
struct i2c_adapter *a = i2c_get_adapter(0);
|
|
struct i2c_msg msg;
|
|
int ret = 0;
|
|
int i;
|
|
|
|
camera_power(0);
|
|
if (!enable)
|
|
return 0; /* no disable for now */
|
|
|
|
camera_power(1);
|
|
for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {
|
|
u_int8_t buf[8];
|
|
|
|
msg.addr = 0x6e;
|
|
msg.buf = buf;
|
|
msg.len = 2;
|
|
msg.flags = 0;
|
|
|
|
buf[0] = camera_ncm03j_magic[i];
|
|
buf[1] = camera_ncm03j_magic[i + 1];
|
|
|
|
ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ap325rxa_camera_add(struct soc_camera_device *icd);
|
|
static void ap325rxa_camera_del(struct soc_camera_device *icd);
|
|
|
|
static struct soc_camera_platform_info camera_info = {
|
|
.format_name = "UYVY",
|
|
.format_depth = 16,
|
|
.format = {
|
|
.code = MEDIA_BUS_FMT_UYVY8_2X8,
|
|
.colorspace = V4L2_COLORSPACE_SMPTE170M,
|
|
.field = V4L2_FIELD_NONE,
|
|
.width = 640,
|
|
.height = 480,
|
|
},
|
|
.mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
|
|
V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
|
|
V4L2_MBUS_DATA_ACTIVE_HIGH,
|
|
.mbus_type = V4L2_MBUS_PARALLEL,
|
|
.set_capture = camera_set_capture,
|
|
};
|
|
|
|
static struct soc_camera_link camera_link = {
|
|
.bus_id = 0,
|
|
.add_device = ap325rxa_camera_add,
|
|
.del_device = ap325rxa_camera_del,
|
|
.module_name = "soc_camera_platform",
|
|
.priv = &camera_info,
|
|
};
|
|
|
|
static struct platform_device *camera_device;
|
|
|
|
static void ap325rxa_camera_release(struct device *dev)
|
|
{
|
|
soc_camera_platform_release(&camera_device);
|
|
}
|
|
|
|
static int ap325rxa_camera_add(struct soc_camera_device *icd)
|
|
{
|
|
int ret = soc_camera_platform_add(icd, &camera_device, &camera_link,
|
|
ap325rxa_camera_release, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = camera_probe();
|
|
if (ret < 0)
|
|
soc_camera_platform_del(icd, camera_device, &camera_link);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ap325rxa_camera_del(struct soc_camera_device *icd)
|
|
{
|
|
soc_camera_platform_del(icd, camera_device, &camera_link);
|
|
}
|
|
#endif /* CONFIG_I2C */
|
|
|
|
static int ov7725_power(struct device *dev, int mode)
|
|
{
|
|
camera_power(0);
|
|
if (mode)
|
|
camera_power(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
|
|
.flags = SH_CEU_FLAG_USE_8BIT_BUS,
|
|
};
|
|
|
|
static struct resource ceu_resources[] = {
|
|
[0] = {
|
|
.name = "CEU",
|
|
.start = 0xfe910000,
|
|
.end = 0xfe91009f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = evt2irq(0x880),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
/* place holder for contiguous memory */
|
|
},
|
|
};
|
|
|
|
static struct platform_device ceu_device = {
|
|
.name = "sh_mobile_ceu",
|
|
.id = 0, /* "ceu0" clock */
|
|
.num_resources = ARRAY_SIZE(ceu_resources),
|
|
.resource = ceu_resources,
|
|
.dev = {
|
|
.platform_data = &sh_mobile_ceu_info,
|
|
},
|
|
};
|
|
|
|
/* Fixed 3.3V regulators to be used by SDHI0, SDHI1 */
|
|
static struct regulator_consumer_supply fixed3v3_power_consumers[] =
|
|
{
|
|
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
|
|
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
|
|
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
|
|
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
|
|
};
|
|
|
|
static struct resource sdhi0_cn3_resources[] = {
|
|
[0] = {
|
|
.name = "SDHI0",
|
|
.start = 0x04ce0000,
|
|
.end = 0x04ce00ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = evt2irq(0xe80),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct tmio_mmc_data sdhi0_cn3_data = {
|
|
.capabilities = MMC_CAP_SDIO_IRQ,
|
|
};
|
|
|
|
static struct platform_device sdhi0_cn3_device = {
|
|
.name = "sh_mobile_sdhi",
|
|
.id = 0, /* "sdhi0" clock */
|
|
.num_resources = ARRAY_SIZE(sdhi0_cn3_resources),
|
|
.resource = sdhi0_cn3_resources,
|
|
.dev = {
|
|
.platform_data = &sdhi0_cn3_data,
|
|
},
|
|
};
|
|
|
|
static struct resource sdhi1_cn7_resources[] = {
|
|
[0] = {
|
|
.name = "SDHI1",
|
|
.start = 0x04cf0000,
|
|
.end = 0x04cf00ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = evt2irq(0x4e0),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct tmio_mmc_data sdhi1_cn7_data = {
|
|
.capabilities = MMC_CAP_SDIO_IRQ,
|
|
};
|
|
|
|
static struct platform_device sdhi1_cn7_device = {
|
|
.name = "sh_mobile_sdhi",
|
|
.id = 1, /* "sdhi1" clock */
|
|
.num_resources = ARRAY_SIZE(sdhi1_cn7_resources),
|
|
.resource = sdhi1_cn7_resources,
|
|
.dev = {
|
|
.platform_data = &sdhi1_cn7_data,
|
|
},
|
|
};
|
|
|
|
static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("pcf8563", 0x51),
|
|
},
|
|
};
|
|
|
|
static struct i2c_board_info ap325rxa_i2c_camera[] = {
|
|
{
|
|
I2C_BOARD_INFO("ov772x", 0x21),
|
|
},
|
|
};
|
|
|
|
static struct ov772x_camera_info ov7725_info = {
|
|
.flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
|
|
.edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0),
|
|
};
|
|
|
|
static struct soc_camera_link ov7725_link = {
|
|
.bus_id = 0,
|
|
.power = ov7725_power,
|
|
.board_info = &ap325rxa_i2c_camera[0],
|
|
.i2c_adapter_id = 0,
|
|
.priv = &ov7725_info,
|
|
};
|
|
|
|
static struct platform_device ap325rxa_camera[] = {
|
|
{
|
|
.name = "soc-camera-pdrv",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &ov7725_link,
|
|
},
|
|
}, {
|
|
.name = "soc-camera-pdrv",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &camera_link,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct platform_device *ap325rxa_devices[] __initdata = {
|
|
&smsc9118_device,
|
|
&ap325rxa_nor_flash_device,
|
|
&lcdc_device,
|
|
&ceu_device,
|
|
&nand_flash_device,
|
|
&sdhi0_cn3_device,
|
|
&sdhi1_cn7_device,
|
|
&ap325rxa_camera[0],
|
|
&ap325rxa_camera[1],
|
|
};
|
|
|
|
extern char ap325rxa_sdram_enter_start;
|
|
extern char ap325rxa_sdram_enter_end;
|
|
extern char ap325rxa_sdram_leave_start;
|
|
extern char ap325rxa_sdram_leave_end;
|
|
|
|
static int __init ap325rxa_devices_setup(void)
|
|
{
|
|
/* register board specific self-refresh code */
|
|
sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
|
|
&ap325rxa_sdram_enter_start,
|
|
&ap325rxa_sdram_enter_end,
|
|
&ap325rxa_sdram_leave_start,
|
|
&ap325rxa_sdram_leave_end);
|
|
|
|
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
|
|
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
|
|
regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
|
|
|
|
/* LD3 and LD4 LEDs */
|
|
gpio_request(GPIO_PTX5, NULL); /* RUN */
|
|
gpio_direction_output(GPIO_PTX5, 1);
|
|
gpio_export(GPIO_PTX5, 0);
|
|
|
|
gpio_request(GPIO_PTX4, NULL); /* INDICATOR */
|
|
gpio_direction_output(GPIO_PTX4, 0);
|
|
gpio_export(GPIO_PTX4, 0);
|
|
|
|
/* SW1 input */
|
|
gpio_request(GPIO_PTF7, NULL); /* MODE */
|
|
gpio_direction_input(GPIO_PTF7);
|
|
gpio_export(GPIO_PTF7, 0);
|
|
|
|
/* LCDC */
|
|
gpio_request(GPIO_FN_LCDD15, NULL);
|
|
gpio_request(GPIO_FN_LCDD14, NULL);
|
|
gpio_request(GPIO_FN_LCDD13, NULL);
|
|
gpio_request(GPIO_FN_LCDD12, NULL);
|
|
gpio_request(GPIO_FN_LCDD11, NULL);
|
|
gpio_request(GPIO_FN_LCDD10, NULL);
|
|
gpio_request(GPIO_FN_LCDD9, NULL);
|
|
gpio_request(GPIO_FN_LCDD8, NULL);
|
|
gpio_request(GPIO_FN_LCDD7, NULL);
|
|
gpio_request(GPIO_FN_LCDD6, NULL);
|
|
gpio_request(GPIO_FN_LCDD5, NULL);
|
|
gpio_request(GPIO_FN_LCDD4, NULL);
|
|
gpio_request(GPIO_FN_LCDD3, NULL);
|
|
gpio_request(GPIO_FN_LCDD2, NULL);
|
|
gpio_request(GPIO_FN_LCDD1, NULL);
|
|
gpio_request(GPIO_FN_LCDD0, NULL);
|
|
gpio_request(GPIO_FN_LCDLCLK_PTR, NULL);
|
|
gpio_request(GPIO_FN_LCDDCK, NULL);
|
|
gpio_request(GPIO_FN_LCDVEPWC, NULL);
|
|
gpio_request(GPIO_FN_LCDVCPWC, NULL);
|
|
gpio_request(GPIO_FN_LCDVSYN, NULL);
|
|
gpio_request(GPIO_FN_LCDHSYN, NULL);
|
|
gpio_request(GPIO_FN_LCDDISP, NULL);
|
|
gpio_request(GPIO_FN_LCDDON, NULL);
|
|
|
|
/* LCD backlight */
|
|
gpio_request(GPIO_PTS3, NULL);
|
|
gpio_direction_output(GPIO_PTS3, 1);
|
|
|
|
/* CEU */
|
|
gpio_request(GPIO_FN_VIO_CLK2, NULL);
|
|
gpio_request(GPIO_FN_VIO_VD2, NULL);
|
|
gpio_request(GPIO_FN_VIO_HD2, NULL);
|
|
gpio_request(GPIO_FN_VIO_FLD, NULL);
|
|
gpio_request(GPIO_FN_VIO_CKO, NULL);
|
|
gpio_request(GPIO_FN_VIO_D15, NULL);
|
|
gpio_request(GPIO_FN_VIO_D14, NULL);
|
|
gpio_request(GPIO_FN_VIO_D13, NULL);
|
|
gpio_request(GPIO_FN_VIO_D12, NULL);
|
|
gpio_request(GPIO_FN_VIO_D11, NULL);
|
|
gpio_request(GPIO_FN_VIO_D10, NULL);
|
|
gpio_request(GPIO_FN_VIO_D9, NULL);
|
|
gpio_request(GPIO_FN_VIO_D8, NULL);
|
|
|
|
gpio_request(GPIO_PTZ7, NULL);
|
|
gpio_direction_output(GPIO_PTZ7, 0); /* OE_CAM */
|
|
gpio_request(GPIO_PTZ6, NULL);
|
|
gpio_direction_output(GPIO_PTZ6, 0); /* STBY_CAM */
|
|
gpio_request(GPIO_PTZ5, NULL);
|
|
gpio_direction_output(GPIO_PTZ5, 0); /* RST_CAM */
|
|
gpio_request(GPIO_PTZ4, NULL);
|
|
gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */
|
|
|
|
__raw_writew(__raw_readw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
|
|
|
|
/* FLCTL */
|
|
gpio_request(GPIO_FN_FCE, NULL);
|
|
gpio_request(GPIO_FN_NAF7, NULL);
|
|
gpio_request(GPIO_FN_NAF6, NULL);
|
|
gpio_request(GPIO_FN_NAF5, NULL);
|
|
gpio_request(GPIO_FN_NAF4, NULL);
|
|
gpio_request(GPIO_FN_NAF3, NULL);
|
|
gpio_request(GPIO_FN_NAF2, NULL);
|
|
gpio_request(GPIO_FN_NAF1, NULL);
|
|
gpio_request(GPIO_FN_NAF0, NULL);
|
|
gpio_request(GPIO_FN_FCDE, NULL);
|
|
gpio_request(GPIO_FN_FOE, NULL);
|
|
gpio_request(GPIO_FN_FSC, NULL);
|
|
gpio_request(GPIO_FN_FWE, NULL);
|
|
gpio_request(GPIO_FN_FRB, NULL);
|
|
|
|
__raw_writew(0, PORT_HIZCRC);
|
|
__raw_writew(0xFFFF, PORT_DRVCRA);
|
|
__raw_writew(0xFFFF, PORT_DRVCRB);
|
|
|
|
platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
|
|
|
|
/* SDHI0 - CN3 - SD CARD */
|
|
gpio_request(GPIO_FN_SDHI0CD_PTD, NULL);
|
|
gpio_request(GPIO_FN_SDHI0WP_PTD, NULL);
|
|
gpio_request(GPIO_FN_SDHI0D3_PTD, NULL);
|
|
gpio_request(GPIO_FN_SDHI0D2_PTD, NULL);
|
|
gpio_request(GPIO_FN_SDHI0D1_PTD, NULL);
|
|
gpio_request(GPIO_FN_SDHI0D0_PTD, NULL);
|
|
gpio_request(GPIO_FN_SDHI0CMD_PTD, NULL);
|
|
gpio_request(GPIO_FN_SDHI0CLK_PTD, NULL);
|
|
|
|
/* SDHI1 - CN7 - MICRO SD CARD */
|
|
gpio_request(GPIO_FN_SDHI1CD, NULL);
|
|
gpio_request(GPIO_FN_SDHI1D3, NULL);
|
|
gpio_request(GPIO_FN_SDHI1D2, NULL);
|
|
gpio_request(GPIO_FN_SDHI1D1, NULL);
|
|
gpio_request(GPIO_FN_SDHI1D0, NULL);
|
|
gpio_request(GPIO_FN_SDHI1CMD, NULL);
|
|
gpio_request(GPIO_FN_SDHI1CLK, NULL);
|
|
|
|
i2c_register_board_info(0, ap325rxa_i2c_devices,
|
|
ARRAY_SIZE(ap325rxa_i2c_devices));
|
|
|
|
return platform_add_devices(ap325rxa_devices,
|
|
ARRAY_SIZE(ap325rxa_devices));
|
|
}
|
|
arch_initcall(ap325rxa_devices_setup);
|
|
|
|
/* Return the board specific boot mode pin configuration */
|
|
static int ap325rxa_mode_pins(void)
|
|
{
|
|
/* MD0=0, MD1=0, MD2=0: Clock Mode 0
|
|
* MD3=0: 16-bit Area0 Bus Width
|
|
* MD5=1: Little Endian
|
|
* TSTMD=1, MD8=1: Test Mode Disabled
|
|
*/
|
|
return MODE_PIN5 | MODE_PIN8;
|
|
}
|
|
|
|
static struct sh_machine_vector mv_ap325rxa __initmv = {
|
|
.mv_name = "AP-325RXA",
|
|
.mv_mode_pins = ap325rxa_mode_pins,
|
|
};
|