WSL2-Linux-Kernel/arch/mips/ath79
Linus Torvalds e5a32b5b21 Here are the main MIPS changes for 4.19.
An overview of the general architecture changes:
 
   - Massive DMA ops refactoring from Christoph Hellwig (huzzah for
     deleting crufty code!).
 
   - We introduce NT_MIPS_DSP & NT_MIPS_FP_MODE ELF notes & corresponding
     regsets to expose DSP ASE & floating point mode state respectively,
     both for live debugging & core dumps.
 
   - We better optimize our code by hard-coding cpu_has_* macros at
     compile time where their values are known due to the ISA revision
     that the kernel build is targeting.
 
   - The EJTAG exception handler now better handles SMP systems, where it
     was previously possible for CPUs to clobber a register value saved
     by another CPU.
 
   - Our implementation of memset() gained a couple of fixes for MIPSr6
     systems to return correct values in some cases where stores fault.
 
   - We now implement ioremap_wc() using the uncached-accelerated cache
     coherency attribute where supported, which is detected during boot,
     and fall back to plain uncached access where necessary. The
     MIPS-specific (and unused in tree) ioremap_uncached_accelerated() &
     ioremap_cacheable_cow() are removed.
 
   - The prctl(PR_SET_FP_MODE, ...) syscall is better supported for SMP
     systems by reworking the way we ensure remote CPUs that may be
     running threads within the affected process switch mode.
 
   - Systems using the MIPS Coherence Manager will now set the
     MIPS_IC_SNOOPS_REMOTE flag to avoid some unnecessary cache
     maintenance overhead when flushing the icache.
 
   - A few fixes were made for building with clang/LLVM, which
     now sucessfully builds kernels for many of our platforms.
 
   - Miscellaneous cleanups all over.
 
 And some platform-specific changes:
 
   - ar7 gained stubs for a few clock API functions to fix build failures
     for some drivers.
 
   - ath79 gained support for a few new SoCs, a few fixes & better
     gpio-keys support.
 
   - Ci20 now exposes its SPI bus using the spi-gpio driver.
 
   - The generic platform can now auto-detect a suitable value for
     PHYS_OFFSET based upon the memory map described by the device tree,
     allowing us to avoid wasting memory on page book-keeping for systems
     where RAM starts at a non-zero physical address.
 
   - Ingenic systems using the jz4740 platform code now link their
     vmlinuz higher to allow for kernels of a realistic size.
 
   - Loongson32 now builds the kernel targeting MIPSr1 rather than MIPSr2
     to avoid CPU errata.
 
   - Loongson64 gains a couple of fixes, a workaround for a write
     buffering issue & support for the Loongson 3A R3.1 CPU.
 
   - Malta now uses the piix4-poweroff driver to handle powering down.
 
   - Microsemi Ocelot gained support for its SPI bus & NOR flash, its
     second MDIO bus and can now be supported by a FIT/.itb image.
 
   - Octeon saw a bunch of header cleanups which remove a lot of
     duplicate or unused code.
 -----BEGIN PGP SIGNATURE-----
 
 iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCW3G6JxUccGF1bC5idXJ0
 b25AbWlwcy5jb20ACgkQPqefrLV1AN0n/gD/Rpdgay31G/4eTTKBmBrcaju6Shjt
 /2Iu6WC5Sj4hDHUBAJSbuI+B9YjcNsjekBYxB/LLD7ImcLBl6nLMIvKmXLAL
 =cUiF
 -----END PGP SIGNATURE-----

Merge tag 'mips_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Paul Burton:
 "Here are the main MIPS changes for 4.19.

  An overview of the general architecture changes:

   - Massive DMA ops refactoring from Christoph Hellwig (huzzah for
     deleting crufty code!).

   - We introduce NT_MIPS_DSP & NT_MIPS_FP_MODE ELF notes &
     corresponding regsets to expose DSP ASE & floating point mode state
     respectively, both for live debugging & core dumps.

   - We better optimize our code by hard-coding cpu_has_* macros at
     compile time where their values are known due to the ISA revision
     that the kernel build is targeting.

   - The EJTAG exception handler now better handles SMP systems, where
     it was previously possible for CPUs to clobber a register value
     saved by another CPU.

   - Our implementation of memset() gained a couple of fixes for MIPSr6
     systems to return correct values in some cases where stores fault.

   - We now implement ioremap_wc() using the uncached-accelerated cache
     coherency attribute where supported, which is detected during boot,
     and fall back to plain uncached access where necessary. The
     MIPS-specific (and unused in tree) ioremap_uncached_accelerated() &
     ioremap_cacheable_cow() are removed.

   - The prctl(PR_SET_FP_MODE, ...) syscall is better supported for SMP
     systems by reworking the way we ensure remote CPUs that may be
     running threads within the affected process switch mode.

   - Systems using the MIPS Coherence Manager will now set the
     MIPS_IC_SNOOPS_REMOTE flag to avoid some unnecessary cache
     maintenance overhead when flushing the icache.

   - A few fixes were made for building with clang/LLVM, which now
     sucessfully builds kernels for many of our platforms.

   - Miscellaneous cleanups all over.

  And some platform-specific changes:

   - ar7 gained stubs for a few clock API functions to fix build
     failures for some drivers.

   - ath79 gained support for a few new SoCs, a few fixes & better
     gpio-keys support.

   - Ci20 now exposes its SPI bus using the spi-gpio driver.

   - The generic platform can now auto-detect a suitable value for
     PHYS_OFFSET based upon the memory map described by the device tree,
     allowing us to avoid wasting memory on page book-keeping for
     systems where RAM starts at a non-zero physical address.

   - Ingenic systems using the jz4740 platform code now link their
     vmlinuz higher to allow for kernels of a realistic size.

   - Loongson32 now builds the kernel targeting MIPSr1 rather than
     MIPSr2 to avoid CPU errata.

   - Loongson64 gains a couple of fixes, a workaround for a write
     buffering issue & support for the Loongson 3A R3.1 CPU.

   - Malta now uses the piix4-poweroff driver to handle powering down.

   - Microsemi Ocelot gained support for its SPI bus & NOR flash, its
     second MDIO bus and can now be supported by a FIT/.itb image.

   - Octeon saw a bunch of header cleanups which remove a lot of
     duplicate or unused code"

* tag 'mips_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (123 commits)
  MIPS: Remove remnants of UASM_ISA
  MIPS: netlogic: xlr: Remove erroneous check in nlm_fmn_send()
  MIPS: VDSO: Force link endianness
  MIPS: Always specify -EB or -EL when using clang
  MIPS: Use dins to simplify __write_64bit_c0_split()
  MIPS: Use read-write output operand in __write_64bit_c0_split()
  MIPS: Avoid using array as parameter to write_c0_kpgd()
  MIPS: vdso: Allow clang's --target flag in VDSO cflags
  MIPS: genvdso: Remove GOT checks
  MIPS: Remove obsolete MIPS checks for DST node "chosen@0"
  MIPS: generic: Remove input symbols from defconfig
  MIPS: Delete unused code in linux32.c
  MIPS: Remove unused sys_32_mmap2
  MIPS: Remove nabi_no_regargs
  mips: dts: mscc: enable spi and NOR flash support on ocelot PCB123
  mips: dts: mscc: Add spi on Ocelot
  MIPS: Loongson: Merge load addresses
  MIPS: Loongson: Set Loongson32 to MIPS32R1
  MIPS: mscc: ocelot: add interrupt controller properties to GPIO controller
  MIPS: generic: Select MIPS_AUTO_PFN_OFFSET
  ...
2018-08-13 19:24:32 -07:00
..
Kconfig License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
Makefile MIPS: ath79: Move the GPIO driver to drivers/gpio 2015-09-03 12:08:02 +02:00
Platform
clock.c MIPS: ath79: add support for QCA953x QCA956x TP9343 2018-07-24 18:57:26 -07:00
common.c Here are the main MIPS changes for 4.19. 2018-08-13 19:24:32 -07:00
common.h MIPS: ath79: Allow using ath79_ddr_wb_flush() from drivers 2016-01-04 09:42:25 +01:00
dev-common.c MIPS: ath79: Add OF support to the GPIO driver 2015-06-21 21:54:09 +02:00
dev-common.h
dev-gpio-buttons.c MIPS: ath79: Use kmemdup rather than duplicating its implementation 2012-05-15 17:49:00 +02:00
dev-gpio-buttons.h
dev-leds-gpio.c MIPS: ath79: Use kmemdup rather than duplicating its implementation 2012-05-15 17:49:00 +02:00
dev-leds-gpio.h
dev-spi.c
dev-spi.h
dev-usb.c MIPS: ath79: add USB controller registration code for the QCA955X SoCs 2013-02-19 09:36:33 +01:00
dev-usb.h
dev-wmac.c MIPS: ath79: add WMAC registration code for the QCA955X SoCs 2013-02-19 09:36:30 +01:00
dev-wmac.h
early_printk.c MIPS: ath79: enable uart during early_prink 2018-07-24 19:07:42 -07:00
irq.c irqchip/ath79-cpu: Move the CPU IRQ driver from arch/mips/ath79/ 2016-02-17 13:47:19 +00:00
mach-ap81.c MIPS: Whitespace cleanup. 2013-02-01 10:00:22 +01:00
mach-ap121.c MIPS: Whitespace cleanup. 2013-02-01 10:00:22 +01:00
mach-ap136.c MIPS: ath79: Fix argument for the ap136_pc_init function 2013-06-21 18:07:02 +02:00
mach-db120.c MIPS: ath79: Fix compilation error when CONFIG_PCI is disabled 2014-10-22 23:16:59 +02:00
mach-pb44.c MIPS: pb44: Fix i2c-gpio GPIO descriptor table 2018-06-18 22:19:50 +01:00
mach-ubnt-xm.c MIPS: ath79: remove ar724x_pci_add_data function 2012-05-15 17:49:06 +02:00
machtypes.h MIPS: ath79: Add basic device tree support 2015-06-21 21:54:01 +02:00
pci.c MIPS: PCI: Move map_irq() hooks out of initdata 2017-09-19 14:55:26 -05:00
pci.h MIPS: ath79: allow to specify bus number in PCI IRQ maps 2013-02-17 01:25:38 +01:00
prom.c MIPS: ath79: fix build problem if CONFIG_BLK_DEV_INITRD is not set 2015-05-29 20:23:36 +02:00
setup.c MIPS: ath79: fix system restart 2018-07-24 18:57:49 -07:00