WSL2-Linux-Kernel/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml

95 строки
2.5 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/memory-controllers/renesas,rpc-if.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Renesas Reduced Pin Count Interface (RPC-IF)
maintainers:
- Sergei Shtylyov <sergei.shtylyov@gmail.com>
description: |
Renesas RPC-IF allows a SPI flash or HyperFlash connected to the SoC to
be accessed via the external address space read mode or the manual mode.
The flash chip itself should be represented by a subnode of the RPC-IF node.
The flash interface is selected based on the "compatible" property of this
subnode:
- if it contains "jedec,spi-nor", then SPI is used;
- if it contains "cfi-flash", then HyperFlash is used.
allOf:
- $ref: "/schemas/spi/spi-controller.yaml#"
properties:
compatible:
items:
- enum:
- renesas,r8a774a1-rpc-if # RZ/G2M
- renesas,r8a774b1-rpc-if # RZ/G2N
- renesas,r8a774c0-rpc-if # RZ/G2E
- renesas,r8a774e1-rpc-if # RZ/G2H
- renesas,r8a77970-rpc-if # R-Car V3M
- renesas,r8a77980-rpc-if # R-Car V3H
- renesas,r8a77995-rpc-if # R-Car D3
- const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 or RZ/G2 device
reg:
items:
- description: RPC-IF registers
- description: direct mapping read mode area
- description: write buffer area
reg-names:
items:
- const: regs
- const: dirmap
- const: wbuf
clocks:
maxItems: 1
power-domains:
maxItems: 1
resets:
maxItems: 1
patternProperties:
"flash@[0-9a-f]+$":
type: object
properties:
compatible:
enum:
- cfi-flash
- jedec,spi-nor
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/renesas-cpg-mssr.h>
#include <dt-bindings/power/r8a77995-sysc.h>
spi@ee200000 {
compatible = "renesas,r8a77995-rpc-if", "renesas,rcar-gen3-rpc-if";
reg = <0xee200000 0x200>,
<0x08000000 0x4000000>,
<0xee208000 0x100>;
reg-names = "regs", "dirmap", "wbuf";
clocks = <&cpg CPG_MOD 917>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 917>;
#address-cells = <1>;
#size-cells = <0>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <1>;
};
};