WSL2-Linux-Kernel/include/linux/pci-ecam.h

96 строки
3.1 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright 2016 Broadcom
*/
#ifndef DRIVERS_PCI_ECAM_H
#define DRIVERS_PCI_ECAM_H
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
/*
* Memory address shift values for the byte-level address that
* can be used when accessing the PCI Express Configuration Space.
*/
/*
* Enhanced Configuration Access Mechanism (ECAM)
*
* See PCI Express Base Specification, Revision 5.0, Version 1.0,
* Section 7.2.2, Table 7-1, p. 677.
*/
#define PCIE_ECAM_BUS_SHIFT 20 /* Bus number */
#define PCIE_ECAM_DEVFN_SHIFT 12 /* Device and Function number */
#define PCIE_ECAM_BUS_MASK 0xff
#define PCIE_ECAM_DEVFN_MASK 0xff
#define PCIE_ECAM_REG_MASK 0xfff /* Limit offset to a maximum of 4K */
#define PCIE_ECAM_BUS(x) (((x) & PCIE_ECAM_BUS_MASK) << PCIE_ECAM_BUS_SHIFT)
#define PCIE_ECAM_DEVFN(x) (((x) & PCIE_ECAM_DEVFN_MASK) << PCIE_ECAM_DEVFN_SHIFT)
#define PCIE_ECAM_REG(x) ((x) & PCIE_ECAM_REG_MASK)
#define PCIE_ECAM_OFFSET(bus, devfn, where) \
(PCIE_ECAM_BUS(bus) | \
PCIE_ECAM_DEVFN(devfn) | \
PCIE_ECAM_REG(where))
/*
* struct to hold pci ops and bus shift of the config window
* for a PCI controller.
*/
struct pci_config_window;
struct pci_ecam_ops {
unsigned int bus_shift;
struct pci_ops pci_ops;
int (*init)(struct pci_config_window *);
};
/*
* struct to hold the mappings of a config space window. This
* is expected to be used as sysdata for PCI controllers that
* use ECAM.
*/
struct pci_config_window {
struct resource res;
struct resource busr;
void *priv;
const struct pci_ecam_ops *ops;
union {
void __iomem *win; /* 64-bit single mapping */
void __iomem **winp; /* 32-bit per-bus mapping */
};
struct device *parent;/* ECAM res was from this dev */
};
/* create and free pci_config_window */
struct pci_config_window *pci_ecam_create(struct device *dev,
struct resource *cfgres, struct resource *busr,
const struct pci_ecam_ops *ops);
void pci_ecam_free(struct pci_config_window *cfg);
/* map_bus when ->sysdata is an instance of pci_config_window */
void __iomem *pci_ecam_map_bus(struct pci_bus *bus, unsigned int devfn,
int where);
/* default ECAM ops */
extern const struct pci_ecam_ops pci_generic_ecam_ops;
#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
extern const struct pci_ecam_ops pci_32b_ops; /* 32-bit accesses only */
extern const struct pci_ecam_ops pci_32b_read_ops; /* 32-bit read only */
extern const struct pci_ecam_ops hisi_pcie_ops; /* HiSilicon */
extern const struct pci_ecam_ops thunder_pem_ecam_ops; /* Cavium ThunderX 1.x & 2.x */
extern const struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX 1.x */
extern const struct pci_ecam_ops xgene_v1_pcie_ecam_ops; /* APM X-Gene PCIe v1 */
extern const struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene PCIe v2.x */
extern const struct pci_ecam_ops al_pcie_ops; /* Amazon Annapurna Labs PCIe */
#endif
#if IS_ENABLED(CONFIG_PCI_HOST_COMMON)
/* for DT-based PCI controllers that support ECAM */
int pci_host_common_probe(struct platform_device *pdev);
int pci_host_common_remove(struct platform_device *pdev);
#endif
#endif