2334 строки
65 KiB
C
2334 строки
65 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2014 - 2018, NVIDIA CORPORATION. All rights reserved.
|
|
*
|
|
* Author:
|
|
* Mikko Perttunen <mperttunen@nvidia.com>
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <linux/debugfs.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/thermal.h>
|
|
|
|
#include <dt-bindings/thermal/tegra124-soctherm.h>
|
|
|
|
#include "../thermal_core.h"
|
|
#include "soctherm.h"
|
|
|
|
#define SENSOR_CONFIG0 0
|
|
#define SENSOR_CONFIG0_STOP BIT(0)
|
|
#define SENSOR_CONFIG0_CPTR_OVER BIT(2)
|
|
#define SENSOR_CONFIG0_OVER BIT(3)
|
|
#define SENSOR_CONFIG0_TCALC_OVER BIT(4)
|
|
#define SENSOR_CONFIG0_TALL_MASK (0xfffff << 8)
|
|
#define SENSOR_CONFIG0_TALL_SHIFT 8
|
|
|
|
#define SENSOR_CONFIG1 4
|
|
#define SENSOR_CONFIG1_TSAMPLE_MASK 0x3ff
|
|
#define SENSOR_CONFIG1_TSAMPLE_SHIFT 0
|
|
#define SENSOR_CONFIG1_TIDDQ_EN_MASK (0x3f << 15)
|
|
#define SENSOR_CONFIG1_TIDDQ_EN_SHIFT 15
|
|
#define SENSOR_CONFIG1_TEN_COUNT_MASK (0x3f << 24)
|
|
#define SENSOR_CONFIG1_TEN_COUNT_SHIFT 24
|
|
#define SENSOR_CONFIG1_TEMP_ENABLE BIT(31)
|
|
|
|
/*
|
|
* SENSOR_CONFIG2 is defined in soctherm.h
|
|
* because, it will be used by tegra_soctherm_fuse.c
|
|
*/
|
|
|
|
#define SENSOR_STATUS0 0xc
|
|
#define SENSOR_STATUS0_VALID_MASK BIT(31)
|
|
#define SENSOR_STATUS0_CAPTURE_MASK 0xffff
|
|
|
|
#define SENSOR_STATUS1 0x10
|
|
#define SENSOR_STATUS1_TEMP_VALID_MASK BIT(31)
|
|
#define SENSOR_STATUS1_TEMP_MASK 0xffff
|
|
|
|
#define READBACK_VALUE_MASK 0xff00
|
|
#define READBACK_VALUE_SHIFT 8
|
|
#define READBACK_ADD_HALF BIT(7)
|
|
#define READBACK_NEGATE BIT(0)
|
|
|
|
/*
|
|
* THERMCTL_LEVEL0_GROUP_CPU is defined in soctherm.h
|
|
* because it will be used by tegraxxx_soctherm.c
|
|
*/
|
|
#define THERMCTL_LVL0_CPU0_EN_MASK BIT(8)
|
|
#define THERMCTL_LVL0_CPU0_CPU_THROT_MASK (0x3 << 5)
|
|
#define THERMCTL_LVL0_CPU0_CPU_THROT_LIGHT 0x1
|
|
#define THERMCTL_LVL0_CPU0_CPU_THROT_HEAVY 0x2
|
|
#define THERMCTL_LVL0_CPU0_GPU_THROT_MASK (0x3 << 3)
|
|
#define THERMCTL_LVL0_CPU0_GPU_THROT_LIGHT 0x1
|
|
#define THERMCTL_LVL0_CPU0_GPU_THROT_HEAVY 0x2
|
|
#define THERMCTL_LVL0_CPU0_MEM_THROT_MASK BIT(2)
|
|
#define THERMCTL_LVL0_CPU0_STATUS_MASK 0x3
|
|
|
|
#define THERMCTL_LVL0_UP_STATS 0x10
|
|
#define THERMCTL_LVL0_DN_STATS 0x14
|
|
|
|
#define THERMCTL_INTR_STATUS 0x84
|
|
|
|
#define TH_INTR_MD0_MASK BIT(25)
|
|
#define TH_INTR_MU0_MASK BIT(24)
|
|
#define TH_INTR_GD0_MASK BIT(17)
|
|
#define TH_INTR_GU0_MASK BIT(16)
|
|
#define TH_INTR_CD0_MASK BIT(9)
|
|
#define TH_INTR_CU0_MASK BIT(8)
|
|
#define TH_INTR_PD0_MASK BIT(1)
|
|
#define TH_INTR_PU0_MASK BIT(0)
|
|
#define TH_INTR_IGNORE_MASK 0xFCFCFCFC
|
|
|
|
#define THERMCTL_STATS_CTL 0x94
|
|
#define STATS_CTL_CLR_DN 0x8
|
|
#define STATS_CTL_EN_DN 0x4
|
|
#define STATS_CTL_CLR_UP 0x2
|
|
#define STATS_CTL_EN_UP 0x1
|
|
|
|
#define OC1_CFG 0x310
|
|
#define OC1_CFG_LONG_LATENCY_MASK BIT(6)
|
|
#define OC1_CFG_HW_RESTORE_MASK BIT(5)
|
|
#define OC1_CFG_PWR_GOOD_MASK_MASK BIT(4)
|
|
#define OC1_CFG_THROTTLE_MODE_MASK (0x3 << 2)
|
|
#define OC1_CFG_ALARM_POLARITY_MASK BIT(1)
|
|
#define OC1_CFG_EN_THROTTLE_MASK BIT(0)
|
|
|
|
#define OC1_CNT_THRESHOLD 0x314
|
|
#define OC1_THROTTLE_PERIOD 0x318
|
|
#define OC1_ALARM_COUNT 0x31c
|
|
#define OC1_FILTER 0x320
|
|
#define OC1_STATS 0x3a8
|
|
|
|
#define OC_INTR_STATUS 0x39c
|
|
#define OC_INTR_ENABLE 0x3a0
|
|
#define OC_INTR_DISABLE 0x3a4
|
|
#define OC_STATS_CTL 0x3c4
|
|
#define OC_STATS_CTL_CLR_ALL 0x2
|
|
#define OC_STATS_CTL_EN_ALL 0x1
|
|
|
|
#define OC_INTR_OC1_MASK BIT(0)
|
|
#define OC_INTR_OC2_MASK BIT(1)
|
|
#define OC_INTR_OC3_MASK BIT(2)
|
|
#define OC_INTR_OC4_MASK BIT(3)
|
|
#define OC_INTR_OC5_MASK BIT(4)
|
|
|
|
#define THROT_GLOBAL_CFG 0x400
|
|
#define THROT_GLOBAL_ENB_MASK BIT(0)
|
|
|
|
#define CPU_PSKIP_STATUS 0x418
|
|
#define XPU_PSKIP_STATUS_M_MASK (0xff << 12)
|
|
#define XPU_PSKIP_STATUS_N_MASK (0xff << 4)
|
|
#define XPU_PSKIP_STATUS_SW_OVERRIDE_MASK BIT(1)
|
|
#define XPU_PSKIP_STATUS_ENABLED_MASK BIT(0)
|
|
|
|
#define THROT_PRIORITY_LOCK 0x424
|
|
#define THROT_PRIORITY_LOCK_PRIORITY_MASK 0xff
|
|
|
|
#define THROT_STATUS 0x428
|
|
#define THROT_STATUS_BREACH_MASK BIT(12)
|
|
#define THROT_STATUS_STATE_MASK (0xff << 4)
|
|
#define THROT_STATUS_ENABLED_MASK BIT(0)
|
|
|
|
#define THROT_PSKIP_CTRL_LITE_CPU 0x430
|
|
#define THROT_PSKIP_CTRL_ENABLE_MASK BIT(31)
|
|
#define THROT_PSKIP_CTRL_DIVIDEND_MASK (0xff << 8)
|
|
#define THROT_PSKIP_CTRL_DIVISOR_MASK 0xff
|
|
#define THROT_PSKIP_CTRL_VECT_GPU_MASK (0x7 << 16)
|
|
#define THROT_PSKIP_CTRL_VECT_CPU_MASK (0x7 << 8)
|
|
#define THROT_PSKIP_CTRL_VECT2_CPU_MASK 0x7
|
|
|
|
#define THROT_VECT_NONE 0x0 /* 3'b000 */
|
|
#define THROT_VECT_LOW 0x1 /* 3'b001 */
|
|
#define THROT_VECT_MED 0x3 /* 3'b011 */
|
|
#define THROT_VECT_HIGH 0x7 /* 3'b111 */
|
|
|
|
#define THROT_PSKIP_RAMP_LITE_CPU 0x434
|
|
#define THROT_PSKIP_RAMP_SEQ_BYPASS_MODE_MASK BIT(31)
|
|
#define THROT_PSKIP_RAMP_DURATION_MASK (0xffff << 8)
|
|
#define THROT_PSKIP_RAMP_STEP_MASK 0xff
|
|
|
|
#define THROT_PRIORITY_LITE 0x444
|
|
#define THROT_PRIORITY_LITE_PRIO_MASK 0xff
|
|
|
|
#define THROT_DELAY_LITE 0x448
|
|
#define THROT_DELAY_LITE_DELAY_MASK 0xff
|
|
|
|
/* car register offsets needed for enabling HW throttling */
|
|
#define CAR_SUPER_CCLKG_DIVIDER 0x36c
|
|
#define CDIVG_USE_THERM_CONTROLS_MASK BIT(30)
|
|
|
|
/* ccroc register offsets needed for enabling HW throttling for Tegra132 */
|
|
#define CCROC_SUPER_CCLKG_DIVIDER 0x024
|
|
|
|
#define CCROC_GLOBAL_CFG 0x148
|
|
|
|
#define CCROC_THROT_PSKIP_RAMP_CPU 0x150
|
|
#define CCROC_THROT_PSKIP_RAMP_SEQ_BYPASS_MODE_MASK BIT(31)
|
|
#define CCROC_THROT_PSKIP_RAMP_DURATION_MASK (0xffff << 8)
|
|
#define CCROC_THROT_PSKIP_RAMP_STEP_MASK 0xff
|
|
|
|
#define CCROC_THROT_PSKIP_CTRL_CPU 0x154
|
|
#define CCROC_THROT_PSKIP_CTRL_ENB_MASK BIT(31)
|
|
#define CCROC_THROT_PSKIP_CTRL_DIVIDEND_MASK (0xff << 8)
|
|
#define CCROC_THROT_PSKIP_CTRL_DIVISOR_MASK 0xff
|
|
|
|
/* get val from register(r) mask bits(m) */
|
|
#define REG_GET_MASK(r, m) (((r) & (m)) >> (ffs(m) - 1))
|
|
/* set val(v) to mask bits(m) of register(r) */
|
|
#define REG_SET_MASK(r, m, v) (((r) & ~(m)) | \
|
|
(((v) & (m >> (ffs(m) - 1))) << (ffs(m) - 1)))
|
|
|
|
/* get dividend from the depth */
|
|
#define THROT_DEPTH_DIVIDEND(depth) ((256 * (100 - (depth)) / 100) - 1)
|
|
|
|
/* gk20a nv_therm interface N:3 Mapping. Levels defined in tegra124-soctherm.h
|
|
* level vector
|
|
* NONE 3'b000
|
|
* LOW 3'b001
|
|
* MED 3'b011
|
|
* HIGH 3'b111
|
|
*/
|
|
#define THROT_LEVEL_TO_DEPTH(level) ((0x1 << (level)) - 1)
|
|
|
|
/* get THROT_PSKIP_xxx offset per LIGHT/HEAVY throt and CPU/GPU dev */
|
|
#define THROT_OFFSET 0x30
|
|
#define THROT_PSKIP_CTRL(throt, dev) (THROT_PSKIP_CTRL_LITE_CPU + \
|
|
(THROT_OFFSET * throt) + (8 * dev))
|
|
#define THROT_PSKIP_RAMP(throt, dev) (THROT_PSKIP_RAMP_LITE_CPU + \
|
|
(THROT_OFFSET * throt) + (8 * dev))
|
|
|
|
/* get THROT_xxx_CTRL offset per LIGHT/HEAVY throt */
|
|
#define THROT_PRIORITY_CTRL(throt) (THROT_PRIORITY_LITE + \
|
|
(THROT_OFFSET * throt))
|
|
#define THROT_DELAY_CTRL(throt) (THROT_DELAY_LITE + \
|
|
(THROT_OFFSET * throt))
|
|
|
|
#define ALARM_OFFSET 0x14
|
|
#define ALARM_CFG(throt) (OC1_CFG + \
|
|
(ALARM_OFFSET * (throt - THROTTLE_OC1)))
|
|
|
|
#define ALARM_CNT_THRESHOLD(throt) (OC1_CNT_THRESHOLD + \
|
|
(ALARM_OFFSET * (throt - THROTTLE_OC1)))
|
|
|
|
#define ALARM_THROTTLE_PERIOD(throt) (OC1_THROTTLE_PERIOD + \
|
|
(ALARM_OFFSET * (throt - THROTTLE_OC1)))
|
|
|
|
#define ALARM_ALARM_COUNT(throt) (OC1_ALARM_COUNT + \
|
|
(ALARM_OFFSET * (throt - THROTTLE_OC1)))
|
|
|
|
#define ALARM_FILTER(throt) (OC1_FILTER + \
|
|
(ALARM_OFFSET * (throt - THROTTLE_OC1)))
|
|
|
|
#define ALARM_STATS(throt) (OC1_STATS + \
|
|
(4 * (throt - THROTTLE_OC1)))
|
|
|
|
/* get CCROC_THROT_PSKIP_xxx offset per HIGH/MED/LOW vect*/
|
|
#define CCROC_THROT_OFFSET 0x0c
|
|
#define CCROC_THROT_PSKIP_CTRL_CPU_REG(vect) (CCROC_THROT_PSKIP_CTRL_CPU + \
|
|
(CCROC_THROT_OFFSET * vect))
|
|
#define CCROC_THROT_PSKIP_RAMP_CPU_REG(vect) (CCROC_THROT_PSKIP_RAMP_CPU + \
|
|
(CCROC_THROT_OFFSET * vect))
|
|
|
|
/* get THERMCTL_LEVELx offset per CPU/GPU/MEM/TSENSE rg and LEVEL0~3 lv */
|
|
#define THERMCTL_LVL_REGS_SIZE 0x20
|
|
#define THERMCTL_LVL_REG(rg, lv) ((rg) + ((lv) * THERMCTL_LVL_REGS_SIZE))
|
|
|
|
#define OC_THROTTLE_MODE_DISABLED 0
|
|
#define OC_THROTTLE_MODE_BRIEF 2
|
|
|
|
static const int min_low_temp = -127000;
|
|
static const int max_high_temp = 127000;
|
|
|
|
enum soctherm_throttle_id {
|
|
THROTTLE_LIGHT = 0,
|
|
THROTTLE_HEAVY,
|
|
THROTTLE_OC1,
|
|
THROTTLE_OC2,
|
|
THROTTLE_OC3,
|
|
THROTTLE_OC4,
|
|
THROTTLE_OC5, /* OC5 is reserved */
|
|
THROTTLE_SIZE,
|
|
};
|
|
|
|
enum soctherm_oc_irq_id {
|
|
TEGRA_SOC_OC_IRQ_1,
|
|
TEGRA_SOC_OC_IRQ_2,
|
|
TEGRA_SOC_OC_IRQ_3,
|
|
TEGRA_SOC_OC_IRQ_4,
|
|
TEGRA_SOC_OC_IRQ_5,
|
|
TEGRA_SOC_OC_IRQ_MAX,
|
|
};
|
|
|
|
enum soctherm_throttle_dev_id {
|
|
THROTTLE_DEV_CPU = 0,
|
|
THROTTLE_DEV_GPU,
|
|
THROTTLE_DEV_SIZE,
|
|
};
|
|
|
|
static const char *const throt_names[] = {
|
|
[THROTTLE_LIGHT] = "light",
|
|
[THROTTLE_HEAVY] = "heavy",
|
|
[THROTTLE_OC1] = "oc1",
|
|
[THROTTLE_OC2] = "oc2",
|
|
[THROTTLE_OC3] = "oc3",
|
|
[THROTTLE_OC4] = "oc4",
|
|
[THROTTLE_OC5] = "oc5",
|
|
};
|
|
|
|
struct tegra_soctherm;
|
|
struct tegra_thermctl_zone {
|
|
void __iomem *reg;
|
|
struct device *dev;
|
|
struct tegra_soctherm *ts;
|
|
struct thermal_zone_device *tz;
|
|
const struct tegra_tsensor_group *sg;
|
|
};
|
|
|
|
struct soctherm_oc_cfg {
|
|
u32 active_low;
|
|
u32 throt_period;
|
|
u32 alarm_cnt_thresh;
|
|
u32 alarm_filter;
|
|
u32 mode;
|
|
bool intr_en;
|
|
};
|
|
|
|
struct soctherm_throt_cfg {
|
|
const char *name;
|
|
unsigned int id;
|
|
u8 priority;
|
|
u8 cpu_throt_level;
|
|
u32 cpu_throt_depth;
|
|
u32 gpu_throt_level;
|
|
struct soctherm_oc_cfg oc_cfg;
|
|
struct thermal_cooling_device *cdev;
|
|
bool init;
|
|
};
|
|
|
|
struct tegra_soctherm {
|
|
struct reset_control *reset;
|
|
struct clk *clock_tsensor;
|
|
struct clk *clock_soctherm;
|
|
void __iomem *regs;
|
|
void __iomem *clk_regs;
|
|
void __iomem *ccroc_regs;
|
|
|
|
int thermal_irq;
|
|
int edp_irq;
|
|
|
|
u32 *calib;
|
|
struct thermal_zone_device **thermctl_tzs;
|
|
struct tegra_soctherm_soc *soc;
|
|
|
|
struct soctherm_throt_cfg throt_cfgs[THROTTLE_SIZE];
|
|
|
|
struct dentry *debugfs_dir;
|
|
|
|
struct mutex thermctl_lock;
|
|
};
|
|
|
|
struct soctherm_oc_irq_chip_data {
|
|
struct mutex irq_lock; /* serialize OC IRQs */
|
|
struct irq_chip irq_chip;
|
|
struct irq_domain *domain;
|
|
int irq_enable;
|
|
};
|
|
|
|
static struct soctherm_oc_irq_chip_data soc_irq_cdata;
|
|
|
|
/**
|
|
* ccroc_writel() - writes a value to a CCROC register
|
|
* @ts: pointer to a struct tegra_soctherm
|
|
* @value: the value to write
|
|
* @reg: the register offset
|
|
*
|
|
* Writes @v to @reg. No return value.
|
|
*/
|
|
static inline void ccroc_writel(struct tegra_soctherm *ts, u32 value, u32 reg)
|
|
{
|
|
writel(value, (ts->ccroc_regs + reg));
|
|
}
|
|
|
|
/**
|
|
* ccroc_readl() - reads specified register from CCROC IP block
|
|
* @ts: pointer to a struct tegra_soctherm
|
|
* @reg: register address to be read
|
|
*
|
|
* Return: the value of the register
|
|
*/
|
|
static inline u32 ccroc_readl(struct tegra_soctherm *ts, u32 reg)
|
|
{
|
|
return readl(ts->ccroc_regs + reg);
|
|
}
|
|
|
|
static void enable_tsensor(struct tegra_soctherm *tegra, unsigned int i)
|
|
{
|
|
const struct tegra_tsensor *sensor = &tegra->soc->tsensors[i];
|
|
void __iomem *base = tegra->regs + sensor->base;
|
|
unsigned int val;
|
|
|
|
val = sensor->config->tall << SENSOR_CONFIG0_TALL_SHIFT;
|
|
writel(val, base + SENSOR_CONFIG0);
|
|
|
|
val = (sensor->config->tsample - 1) << SENSOR_CONFIG1_TSAMPLE_SHIFT;
|
|
val |= sensor->config->tiddq_en << SENSOR_CONFIG1_TIDDQ_EN_SHIFT;
|
|
val |= sensor->config->ten_count << SENSOR_CONFIG1_TEN_COUNT_SHIFT;
|
|
val |= SENSOR_CONFIG1_TEMP_ENABLE;
|
|
writel(val, base + SENSOR_CONFIG1);
|
|
|
|
writel(tegra->calib[i], base + SENSOR_CONFIG2);
|
|
}
|
|
|
|
/*
|
|
* Translate from soctherm readback format to millicelsius.
|
|
* The soctherm readback format in bits is as follows:
|
|
* TTTTTTTT H______N
|
|
* where T's contain the temperature in Celsius,
|
|
* H denotes an addition of 0.5 Celsius and N denotes negation
|
|
* of the final value.
|
|
*/
|
|
static int translate_temp(u16 val)
|
|
{
|
|
int t;
|
|
|
|
t = ((val & READBACK_VALUE_MASK) >> READBACK_VALUE_SHIFT) * 1000;
|
|
if (val & READBACK_ADD_HALF)
|
|
t += 500;
|
|
if (val & READBACK_NEGATE)
|
|
t *= -1;
|
|
|
|
return t;
|
|
}
|
|
|
|
static int tegra_thermctl_get_temp(void *data, int *out_temp)
|
|
{
|
|
struct tegra_thermctl_zone *zone = data;
|
|
u32 val;
|
|
|
|
val = readl(zone->reg);
|
|
val = REG_GET_MASK(val, zone->sg->sensor_temp_mask);
|
|
*out_temp = translate_temp(val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* enforce_temp_range() - check and enforce temperature range [min, max]
|
|
* @dev: struct device * of the SOC_THERM instance
|
|
* @trip_temp: the trip temperature to check
|
|
*
|
|
* Checks and enforces the permitted temperature range that SOC_THERM
|
|
* HW can support This is
|
|
* done while taking care of precision.
|
|
*
|
|
* Return: The precision adjusted capped temperature in millicelsius.
|
|
*/
|
|
static int enforce_temp_range(struct device *dev, int trip_temp)
|
|
{
|
|
int temp;
|
|
|
|
temp = clamp_val(trip_temp, min_low_temp, max_high_temp);
|
|
if (temp != trip_temp)
|
|
dev_info(dev, "soctherm: trip temperature %d forced to %d\n",
|
|
trip_temp, temp);
|
|
return temp;
|
|
}
|
|
|
|
/**
|
|
* thermtrip_program() - Configures the hardware to shut down the
|
|
* system if a given sensor group reaches a given temperature
|
|
* @dev: ptr to the struct device for the SOC_THERM IP block
|
|
* @sg: pointer to the sensor group to set the thermtrip temperature for
|
|
* @trip_temp: the temperature in millicelsius to trigger the thermal trip at
|
|
*
|
|
* Sets the thermal trip threshold of the given sensor group to be the
|
|
* @trip_temp. If this threshold is crossed, the hardware will shut
|
|
* down.
|
|
*
|
|
* Note that, although @trip_temp is specified in millicelsius, the
|
|
* hardware is programmed in degrees Celsius.
|
|
*
|
|
* Return: 0 upon success, or %-EINVAL upon failure.
|
|
*/
|
|
static int thermtrip_program(struct device *dev,
|
|
const struct tegra_tsensor_group *sg,
|
|
int trip_temp)
|
|
{
|
|
struct tegra_soctherm *ts = dev_get_drvdata(dev);
|
|
int temp;
|
|
u32 r;
|
|
|
|
if (!sg || !sg->thermtrip_threshold_mask)
|
|
return -EINVAL;
|
|
|
|
temp = enforce_temp_range(dev, trip_temp) / ts->soc->thresh_grain;
|
|
|
|
r = readl(ts->regs + THERMCTL_THERMTRIP_CTL);
|
|
r = REG_SET_MASK(r, sg->thermtrip_threshold_mask, temp);
|
|
r = REG_SET_MASK(r, sg->thermtrip_enable_mask, 1);
|
|
r = REG_SET_MASK(r, sg->thermtrip_any_en_mask, 0);
|
|
writel(r, ts->regs + THERMCTL_THERMTRIP_CTL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* throttrip_program() - Configures the hardware to throttle the
|
|
* pulse if a given sensor group reaches a given temperature
|
|
* @dev: ptr to the struct device for the SOC_THERM IP block
|
|
* @sg: pointer to the sensor group to set the thermtrip temperature for
|
|
* @stc: pointer to the throttle need to be triggered
|
|
* @trip_temp: the temperature in millicelsius to trigger the thermal trip at
|
|
*
|
|
* Sets the thermal trip threshold and throttle event of the given sensor
|
|
* group. If this threshold is crossed, the hardware will trigger the
|
|
* throttle.
|
|
*
|
|
* Note that, although @trip_temp is specified in millicelsius, the
|
|
* hardware is programmed in degrees Celsius.
|
|
*
|
|
* Return: 0 upon success, or %-EINVAL upon failure.
|
|
*/
|
|
static int throttrip_program(struct device *dev,
|
|
const struct tegra_tsensor_group *sg,
|
|
struct soctherm_throt_cfg *stc,
|
|
int trip_temp)
|
|
{
|
|
struct tegra_soctherm *ts = dev_get_drvdata(dev);
|
|
int temp, cpu_throt, gpu_throt;
|
|
unsigned int throt;
|
|
u32 r, reg_off;
|
|
|
|
if (!sg || !stc || !stc->init)
|
|
return -EINVAL;
|
|
|
|
temp = enforce_temp_range(dev, trip_temp) / ts->soc->thresh_grain;
|
|
|
|
/* Hardcode LIGHT on LEVEL1 and HEAVY on LEVEL2 */
|
|
throt = stc->id;
|
|
reg_off = THERMCTL_LVL_REG(sg->thermctl_lvl0_offset, throt + 1);
|
|
|
|
if (throt == THROTTLE_LIGHT) {
|
|
cpu_throt = THERMCTL_LVL0_CPU0_CPU_THROT_LIGHT;
|
|
gpu_throt = THERMCTL_LVL0_CPU0_GPU_THROT_LIGHT;
|
|
} else {
|
|
cpu_throt = THERMCTL_LVL0_CPU0_CPU_THROT_HEAVY;
|
|
gpu_throt = THERMCTL_LVL0_CPU0_GPU_THROT_HEAVY;
|
|
if (throt != THROTTLE_HEAVY)
|
|
dev_warn(dev,
|
|
"invalid throt id %d - assuming HEAVY",
|
|
throt);
|
|
}
|
|
|
|
r = readl(ts->regs + reg_off);
|
|
r = REG_SET_MASK(r, sg->thermctl_lvl0_up_thresh_mask, temp);
|
|
r = REG_SET_MASK(r, sg->thermctl_lvl0_dn_thresh_mask, temp);
|
|
r = REG_SET_MASK(r, THERMCTL_LVL0_CPU0_CPU_THROT_MASK, cpu_throt);
|
|
r = REG_SET_MASK(r, THERMCTL_LVL0_CPU0_GPU_THROT_MASK, gpu_throt);
|
|
r = REG_SET_MASK(r, THERMCTL_LVL0_CPU0_EN_MASK, 1);
|
|
writel(r, ts->regs + reg_off);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct soctherm_throt_cfg *
|
|
find_throttle_cfg_by_name(struct tegra_soctherm *ts, const char *name)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; ts->throt_cfgs[i].name; i++)
|
|
if (!strcmp(ts->throt_cfgs[i].name, name))
|
|
return &ts->throt_cfgs[i];
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int tsensor_group_thermtrip_get(struct tegra_soctherm *ts, int id)
|
|
{
|
|
int i, temp = min_low_temp;
|
|
struct tsensor_group_thermtrips *tt = ts->soc->thermtrips;
|
|
|
|
if (id >= TEGRA124_SOCTHERM_SENSOR_NUM)
|
|
return temp;
|
|
|
|
if (tt) {
|
|
for (i = 0; i < ts->soc->num_ttgs; i++) {
|
|
if (tt[i].id == id)
|
|
return tt[i].temp;
|
|
}
|
|
}
|
|
|
|
return temp;
|
|
}
|
|
|
|
static int tegra_thermctl_set_trip_temp(void *data, int trip, int temp)
|
|
{
|
|
struct tegra_thermctl_zone *zone = data;
|
|
struct thermal_zone_device *tz = zone->tz;
|
|
struct tegra_soctherm *ts = zone->ts;
|
|
const struct tegra_tsensor_group *sg = zone->sg;
|
|
struct device *dev = zone->dev;
|
|
enum thermal_trip_type type;
|
|
int ret;
|
|
|
|
if (!tz)
|
|
return -EINVAL;
|
|
|
|
ret = tz->ops->get_trip_type(tz, trip, &type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (type == THERMAL_TRIP_CRITICAL) {
|
|
/*
|
|
* If thermtrips property is set in DT,
|
|
* doesn't need to program critical type trip to HW,
|
|
* if not, program critical trip to HW.
|
|
*/
|
|
if (min_low_temp == tsensor_group_thermtrip_get(ts, sg->id))
|
|
return thermtrip_program(dev, sg, temp);
|
|
else
|
|
return 0;
|
|
|
|
} else if (type == THERMAL_TRIP_HOT) {
|
|
int i;
|
|
|
|
for (i = 0; i < THROTTLE_SIZE; i++) {
|
|
struct thermal_cooling_device *cdev;
|
|
struct soctherm_throt_cfg *stc;
|
|
|
|
if (!ts->throt_cfgs[i].init)
|
|
continue;
|
|
|
|
cdev = ts->throt_cfgs[i].cdev;
|
|
if (get_thermal_instance(tz, cdev, trip))
|
|
stc = find_throttle_cfg_by_name(ts, cdev->type);
|
|
else
|
|
continue;
|
|
|
|
return throttrip_program(dev, sg, stc, temp);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_thermctl_get_trend(void *data, int trip,
|
|
enum thermal_trend *trend)
|
|
{
|
|
struct tegra_thermctl_zone *zone = data;
|
|
struct thermal_zone_device *tz = zone->tz;
|
|
int trip_temp, temp, last_temp, ret;
|
|
|
|
if (!tz)
|
|
return -EINVAL;
|
|
|
|
ret = tz->ops->get_trip_temp(zone->tz, trip, &trip_temp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
temp = READ_ONCE(tz->temperature);
|
|
last_temp = READ_ONCE(tz->last_temperature);
|
|
|
|
if (temp > trip_temp) {
|
|
if (temp >= last_temp)
|
|
*trend = THERMAL_TREND_RAISING;
|
|
else
|
|
*trend = THERMAL_TREND_STABLE;
|
|
} else if (temp < trip_temp) {
|
|
*trend = THERMAL_TREND_DROPPING;
|
|
} else {
|
|
*trend = THERMAL_TREND_STABLE;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void thermal_irq_enable(struct tegra_thermctl_zone *zn)
|
|
{
|
|
u32 r;
|
|
|
|
/* multiple zones could be handling and setting trips at once */
|
|
mutex_lock(&zn->ts->thermctl_lock);
|
|
r = readl(zn->ts->regs + THERMCTL_INTR_ENABLE);
|
|
r = REG_SET_MASK(r, zn->sg->thermctl_isr_mask, TH_INTR_UP_DN_EN);
|
|
writel(r, zn->ts->regs + THERMCTL_INTR_ENABLE);
|
|
mutex_unlock(&zn->ts->thermctl_lock);
|
|
}
|
|
|
|
static void thermal_irq_disable(struct tegra_thermctl_zone *zn)
|
|
{
|
|
u32 r;
|
|
|
|
/* multiple zones could be handling and setting trips at once */
|
|
mutex_lock(&zn->ts->thermctl_lock);
|
|
r = readl(zn->ts->regs + THERMCTL_INTR_DISABLE);
|
|
r = REG_SET_MASK(r, zn->sg->thermctl_isr_mask, 0);
|
|
writel(r, zn->ts->regs + THERMCTL_INTR_DISABLE);
|
|
mutex_unlock(&zn->ts->thermctl_lock);
|
|
}
|
|
|
|
static int tegra_thermctl_set_trips(void *data, int lo, int hi)
|
|
{
|
|
struct tegra_thermctl_zone *zone = data;
|
|
u32 r;
|
|
|
|
thermal_irq_disable(zone);
|
|
|
|
r = readl(zone->ts->regs + zone->sg->thermctl_lvl0_offset);
|
|
r = REG_SET_MASK(r, THERMCTL_LVL0_CPU0_EN_MASK, 0);
|
|
writel(r, zone->ts->regs + zone->sg->thermctl_lvl0_offset);
|
|
|
|
lo = enforce_temp_range(zone->dev, lo) / zone->ts->soc->thresh_grain;
|
|
hi = enforce_temp_range(zone->dev, hi) / zone->ts->soc->thresh_grain;
|
|
dev_dbg(zone->dev, "%s hi:%d, lo:%d\n", __func__, hi, lo);
|
|
|
|
r = REG_SET_MASK(r, zone->sg->thermctl_lvl0_up_thresh_mask, hi);
|
|
r = REG_SET_MASK(r, zone->sg->thermctl_lvl0_dn_thresh_mask, lo);
|
|
r = REG_SET_MASK(r, THERMCTL_LVL0_CPU0_EN_MASK, 1);
|
|
writel(r, zone->ts->regs + zone->sg->thermctl_lvl0_offset);
|
|
|
|
thermal_irq_enable(zone);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct thermal_zone_of_device_ops tegra_of_thermal_ops = {
|
|
.get_temp = tegra_thermctl_get_temp,
|
|
.set_trip_temp = tegra_thermctl_set_trip_temp,
|
|
.get_trend = tegra_thermctl_get_trend,
|
|
.set_trips = tegra_thermctl_set_trips,
|
|
};
|
|
|
|
static int get_hot_temp(struct thermal_zone_device *tz, int *trip, int *temp)
|
|
{
|
|
int ntrips, i, ret;
|
|
enum thermal_trip_type type;
|
|
|
|
ntrips = of_thermal_get_ntrips(tz);
|
|
if (ntrips <= 0)
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < ntrips; i++) {
|
|
ret = tz->ops->get_trip_type(tz, i, &type);
|
|
if (ret)
|
|
return -EINVAL;
|
|
if (type == THERMAL_TRIP_HOT) {
|
|
ret = tz->ops->get_trip_temp(tz, i, temp);
|
|
if (!ret)
|
|
*trip = i;
|
|
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* tegra_soctherm_set_hwtrips() - set HW trip point from DT data
|
|
* @dev: struct device * of the SOC_THERM instance
|
|
* @sg: pointer to the sensor group to set the thermtrip temperature for
|
|
* @tz: struct thermal_zone_device *
|
|
*
|
|
* Configure the SOC_THERM HW trip points, setting "THERMTRIP"
|
|
* "THROTTLE" trip points , using "thermtrips", "critical" or "hot"
|
|
* type trip_temp
|
|
* from thermal zone.
|
|
* After they have been configured, THERMTRIP or THROTTLE will take
|
|
* action when the configured SoC thermal sensor group reaches a
|
|
* certain temperature.
|
|
*
|
|
* Return: 0 upon success, or a negative error code on failure.
|
|
* "Success" does not mean that trips was enabled; it could also
|
|
* mean that no node was found in DT.
|
|
* THERMTRIP has been enabled successfully when a message similar to
|
|
* this one appears on the serial console:
|
|
* "thermtrip: will shut down when sensor group XXX reaches YYYYYY mC"
|
|
* THROTTLE has been enabled successfully when a message similar to
|
|
* this one appears on the serial console:
|
|
* ""throttrip: will throttle when sensor group XXX reaches YYYYYY mC"
|
|
*/
|
|
static int tegra_soctherm_set_hwtrips(struct device *dev,
|
|
const struct tegra_tsensor_group *sg,
|
|
struct thermal_zone_device *tz)
|
|
{
|
|
struct tegra_soctherm *ts = dev_get_drvdata(dev);
|
|
struct soctherm_throt_cfg *stc;
|
|
int i, trip, temperature, ret;
|
|
|
|
/* Get thermtrips. If missing, try to get critical trips. */
|
|
temperature = tsensor_group_thermtrip_get(ts, sg->id);
|
|
if (min_low_temp == temperature)
|
|
if (tz->ops->get_crit_temp(tz, &temperature))
|
|
temperature = max_high_temp;
|
|
|
|
ret = thermtrip_program(dev, sg, temperature);
|
|
if (ret) {
|
|
dev_err(dev, "thermtrip: %s: error during enable\n", sg->name);
|
|
return ret;
|
|
}
|
|
|
|
dev_info(dev, "thermtrip: will shut down when %s reaches %d mC\n",
|
|
sg->name, temperature);
|
|
|
|
ret = get_hot_temp(tz, &trip, &temperature);
|
|
if (ret) {
|
|
dev_info(dev, "throttrip: %s: missing hot temperature\n",
|
|
sg->name);
|
|
return 0;
|
|
}
|
|
|
|
for (i = 0; i < THROTTLE_OC1; i++) {
|
|
struct thermal_cooling_device *cdev;
|
|
|
|
if (!ts->throt_cfgs[i].init)
|
|
continue;
|
|
|
|
cdev = ts->throt_cfgs[i].cdev;
|
|
if (get_thermal_instance(tz, cdev, trip))
|
|
stc = find_throttle_cfg_by_name(ts, cdev->type);
|
|
else
|
|
continue;
|
|
|
|
ret = throttrip_program(dev, sg, stc, temperature);
|
|
if (ret) {
|
|
dev_err(dev, "throttrip: %s: error during enable\n",
|
|
sg->name);
|
|
return ret;
|
|
}
|
|
|
|
dev_info(dev,
|
|
"throttrip: will throttle when %s reaches %d mC\n",
|
|
sg->name, temperature);
|
|
break;
|
|
}
|
|
|
|
if (i == THROTTLE_SIZE)
|
|
dev_info(dev, "throttrip: %s: missing throttle cdev\n",
|
|
sg->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t soctherm_thermal_isr(int irq, void *dev_id)
|
|
{
|
|
struct tegra_soctherm *ts = dev_id;
|
|
u32 r;
|
|
|
|
/* Case for no lock:
|
|
* Although interrupts are enabled in set_trips, there is still no need
|
|
* to lock here because the interrupts are disabled before programming
|
|
* new trip points. Hence there cant be a interrupt on the same sensor.
|
|
* An interrupt can however occur on a sensor while trips are being
|
|
* programmed on a different one. This beign a LEVEL interrupt won't
|
|
* cause a new interrupt but this is taken care of by the re-reading of
|
|
* the STATUS register in the thread function.
|
|
*/
|
|
r = readl(ts->regs + THERMCTL_INTR_STATUS);
|
|
writel(r, ts->regs + THERMCTL_INTR_DISABLE);
|
|
|
|
return IRQ_WAKE_THREAD;
|
|
}
|
|
|
|
/**
|
|
* soctherm_thermal_isr_thread() - Handles a thermal interrupt request
|
|
* @irq: The interrupt number being requested; not used
|
|
* @dev_id: Opaque pointer to tegra_soctherm;
|
|
*
|
|
* Clears the interrupt status register if there are expected
|
|
* interrupt bits set.
|
|
* The interrupt(s) are then handled by updating the corresponding
|
|
* thermal zones.
|
|
*
|
|
* An error is logged if any unexpected interrupt bits are set.
|
|
*
|
|
* Disabled interrupts are re-enabled.
|
|
*
|
|
* Return: %IRQ_HANDLED. Interrupt was handled and no further processing
|
|
* is needed.
|
|
*/
|
|
static irqreturn_t soctherm_thermal_isr_thread(int irq, void *dev_id)
|
|
{
|
|
struct tegra_soctherm *ts = dev_id;
|
|
struct thermal_zone_device *tz;
|
|
u32 st, ex = 0, cp = 0, gp = 0, pl = 0, me = 0;
|
|
|
|
st = readl(ts->regs + THERMCTL_INTR_STATUS);
|
|
|
|
/* deliberately clear expected interrupts handled in SW */
|
|
cp |= st & TH_INTR_CD0_MASK;
|
|
cp |= st & TH_INTR_CU0_MASK;
|
|
|
|
gp |= st & TH_INTR_GD0_MASK;
|
|
gp |= st & TH_INTR_GU0_MASK;
|
|
|
|
pl |= st & TH_INTR_PD0_MASK;
|
|
pl |= st & TH_INTR_PU0_MASK;
|
|
|
|
me |= st & TH_INTR_MD0_MASK;
|
|
me |= st & TH_INTR_MU0_MASK;
|
|
|
|
ex |= cp | gp | pl | me;
|
|
if (ex) {
|
|
writel(ex, ts->regs + THERMCTL_INTR_STATUS);
|
|
st &= ~ex;
|
|
|
|
if (cp) {
|
|
tz = ts->thermctl_tzs[TEGRA124_SOCTHERM_SENSOR_CPU];
|
|
thermal_zone_device_update(tz,
|
|
THERMAL_EVENT_UNSPECIFIED);
|
|
}
|
|
|
|
if (gp) {
|
|
tz = ts->thermctl_tzs[TEGRA124_SOCTHERM_SENSOR_GPU];
|
|
thermal_zone_device_update(tz,
|
|
THERMAL_EVENT_UNSPECIFIED);
|
|
}
|
|
|
|
if (pl) {
|
|
tz = ts->thermctl_tzs[TEGRA124_SOCTHERM_SENSOR_PLLX];
|
|
thermal_zone_device_update(tz,
|
|
THERMAL_EVENT_UNSPECIFIED);
|
|
}
|
|
|
|
if (me) {
|
|
tz = ts->thermctl_tzs[TEGRA124_SOCTHERM_SENSOR_MEM];
|
|
thermal_zone_device_update(tz,
|
|
THERMAL_EVENT_UNSPECIFIED);
|
|
}
|
|
}
|
|
|
|
/* deliberately ignore expected interrupts NOT handled in SW */
|
|
ex |= TH_INTR_IGNORE_MASK;
|
|
st &= ~ex;
|
|
|
|
if (st) {
|
|
/* Whine about any other unexpected INTR bits still set */
|
|
pr_err("soctherm: Ignored unexpected INTRs 0x%08x\n", st);
|
|
writel(st, ts->regs + THERMCTL_INTR_STATUS);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* soctherm_oc_intr_enable() - Enables the soctherm over-current interrupt
|
|
* @ts: pointer to a struct tegra_soctherm
|
|
* @alarm: The soctherm throttle id
|
|
* @enable: Flag indicating enable the soctherm over-current
|
|
* interrupt or disable it
|
|
*
|
|
* Enables a specific over-current pins @alarm to raise an interrupt if the flag
|
|
* is set and the alarm corresponds to OC1, OC2, OC3, or OC4.
|
|
*/
|
|
static void soctherm_oc_intr_enable(struct tegra_soctherm *ts,
|
|
enum soctherm_throttle_id alarm,
|
|
bool enable)
|
|
{
|
|
u32 r;
|
|
|
|
if (!enable)
|
|
return;
|
|
|
|
r = readl(ts->regs + OC_INTR_ENABLE);
|
|
switch (alarm) {
|
|
case THROTTLE_OC1:
|
|
r = REG_SET_MASK(r, OC_INTR_OC1_MASK, 1);
|
|
break;
|
|
case THROTTLE_OC2:
|
|
r = REG_SET_MASK(r, OC_INTR_OC2_MASK, 1);
|
|
break;
|
|
case THROTTLE_OC3:
|
|
r = REG_SET_MASK(r, OC_INTR_OC3_MASK, 1);
|
|
break;
|
|
case THROTTLE_OC4:
|
|
r = REG_SET_MASK(r, OC_INTR_OC4_MASK, 1);
|
|
break;
|
|
default:
|
|
r = 0;
|
|
break;
|
|
}
|
|
writel(r, ts->regs + OC_INTR_ENABLE);
|
|
}
|
|
|
|
/**
|
|
* soctherm_handle_alarm() - Handles soctherm alarms
|
|
* @alarm: The soctherm throttle id
|
|
*
|
|
* "Handles" over-current alarms (OC1, OC2, OC3, and OC4) by printing
|
|
* a warning or informative message.
|
|
*
|
|
* Return: -EINVAL for @alarm = THROTTLE_OC3, otherwise 0 (success).
|
|
*/
|
|
static int soctherm_handle_alarm(enum soctherm_throttle_id alarm)
|
|
{
|
|
int rv = -EINVAL;
|
|
|
|
switch (alarm) {
|
|
case THROTTLE_OC1:
|
|
pr_debug("soctherm: Successfully handled OC1 alarm\n");
|
|
rv = 0;
|
|
break;
|
|
|
|
case THROTTLE_OC2:
|
|
pr_debug("soctherm: Successfully handled OC2 alarm\n");
|
|
rv = 0;
|
|
break;
|
|
|
|
case THROTTLE_OC3:
|
|
pr_debug("soctherm: Successfully handled OC3 alarm\n");
|
|
rv = 0;
|
|
break;
|
|
|
|
case THROTTLE_OC4:
|
|
pr_debug("soctherm: Successfully handled OC4 alarm\n");
|
|
rv = 0;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (rv)
|
|
pr_err("soctherm: ERROR in handling %s alarm\n",
|
|
throt_names[alarm]);
|
|
|
|
return rv;
|
|
}
|
|
|
|
/**
|
|
* soctherm_edp_isr_thread() - log an over-current interrupt request
|
|
* @irq: OC irq number. Currently not being used. See description
|
|
* @arg: a void pointer for callback, currently not being used
|
|
*
|
|
* Over-current events are handled in hardware. This function is called to log
|
|
* and handle any OC events that happened. Additionally, it checks every
|
|
* over-current interrupt registers for registers are set but
|
|
* was not expected (i.e. any discrepancy in interrupt status) by the function,
|
|
* the discrepancy will logged.
|
|
*
|
|
* Return: %IRQ_HANDLED
|
|
*/
|
|
static irqreturn_t soctherm_edp_isr_thread(int irq, void *arg)
|
|
{
|
|
struct tegra_soctherm *ts = arg;
|
|
u32 st, ex, oc1, oc2, oc3, oc4;
|
|
|
|
st = readl(ts->regs + OC_INTR_STATUS);
|
|
|
|
/* deliberately clear expected interrupts handled in SW */
|
|
oc1 = st & OC_INTR_OC1_MASK;
|
|
oc2 = st & OC_INTR_OC2_MASK;
|
|
oc3 = st & OC_INTR_OC3_MASK;
|
|
oc4 = st & OC_INTR_OC4_MASK;
|
|
ex = oc1 | oc2 | oc3 | oc4;
|
|
|
|
pr_err("soctherm: OC ALARM 0x%08x\n", ex);
|
|
if (ex) {
|
|
writel(st, ts->regs + OC_INTR_STATUS);
|
|
st &= ~ex;
|
|
|
|
if (oc1 && !soctherm_handle_alarm(THROTTLE_OC1))
|
|
soctherm_oc_intr_enable(ts, THROTTLE_OC1, true);
|
|
|
|
if (oc2 && !soctherm_handle_alarm(THROTTLE_OC2))
|
|
soctherm_oc_intr_enable(ts, THROTTLE_OC2, true);
|
|
|
|
if (oc3 && !soctherm_handle_alarm(THROTTLE_OC3))
|
|
soctherm_oc_intr_enable(ts, THROTTLE_OC3, true);
|
|
|
|
if (oc4 && !soctherm_handle_alarm(THROTTLE_OC4))
|
|
soctherm_oc_intr_enable(ts, THROTTLE_OC4, true);
|
|
|
|
if (oc1 && soc_irq_cdata.irq_enable & BIT(0))
|
|
handle_nested_irq(
|
|
irq_find_mapping(soc_irq_cdata.domain, 0));
|
|
|
|
if (oc2 && soc_irq_cdata.irq_enable & BIT(1))
|
|
handle_nested_irq(
|
|
irq_find_mapping(soc_irq_cdata.domain, 1));
|
|
|
|
if (oc3 && soc_irq_cdata.irq_enable & BIT(2))
|
|
handle_nested_irq(
|
|
irq_find_mapping(soc_irq_cdata.domain, 2));
|
|
|
|
if (oc4 && soc_irq_cdata.irq_enable & BIT(3))
|
|
handle_nested_irq(
|
|
irq_find_mapping(soc_irq_cdata.domain, 3));
|
|
}
|
|
|
|
if (st) {
|
|
pr_err("soctherm: Ignored unexpected OC ALARM 0x%08x\n", st);
|
|
writel(st, ts->regs + OC_INTR_STATUS);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* soctherm_edp_isr() - Disables any active interrupts
|
|
* @irq: The interrupt request number
|
|
* @arg: Opaque pointer to an argument
|
|
*
|
|
* Writes to the OC_INTR_DISABLE register the over current interrupt status,
|
|
* masking any asserted interrupts. Doing this prevents the same interrupts
|
|
* from triggering this isr repeatedly. The thread woken by this isr will
|
|
* handle asserted interrupts and subsequently unmask/re-enable them.
|
|
*
|
|
* The OC_INTR_DISABLE register indicates which OC interrupts
|
|
* have been disabled.
|
|
*
|
|
* Return: %IRQ_WAKE_THREAD, handler requests to wake the handler thread
|
|
*/
|
|
static irqreturn_t soctherm_edp_isr(int irq, void *arg)
|
|
{
|
|
struct tegra_soctherm *ts = arg;
|
|
u32 r;
|
|
|
|
if (!ts)
|
|
return IRQ_NONE;
|
|
|
|
r = readl(ts->regs + OC_INTR_STATUS);
|
|
writel(r, ts->regs + OC_INTR_DISABLE);
|
|
|
|
return IRQ_WAKE_THREAD;
|
|
}
|
|
|
|
/**
|
|
* soctherm_oc_irq_lock() - locks the over-current interrupt request
|
|
* @data: Interrupt request data
|
|
*
|
|
* Looks up the chip data from @data and locks the mutex associated with
|
|
* a particular over-current interrupt request.
|
|
*/
|
|
static void soctherm_oc_irq_lock(struct irq_data *data)
|
|
{
|
|
struct soctherm_oc_irq_chip_data *d = irq_data_get_irq_chip_data(data);
|
|
|
|
mutex_lock(&d->irq_lock);
|
|
}
|
|
|
|
/**
|
|
* soctherm_oc_irq_sync_unlock() - Unlocks the OC interrupt request
|
|
* @data: Interrupt request data
|
|
*
|
|
* Looks up the interrupt request data @data and unlocks the mutex associated
|
|
* with a particular over-current interrupt request.
|
|
*/
|
|
static void soctherm_oc_irq_sync_unlock(struct irq_data *data)
|
|
{
|
|
struct soctherm_oc_irq_chip_data *d = irq_data_get_irq_chip_data(data);
|
|
|
|
mutex_unlock(&d->irq_lock);
|
|
}
|
|
|
|
/**
|
|
* soctherm_oc_irq_enable() - Enables the SOC_THERM over-current interrupt queue
|
|
* @data: irq_data structure of the chip
|
|
*
|
|
* Sets the irq_enable bit of SOC_THERM allowing SOC_THERM
|
|
* to respond to over-current interrupts.
|
|
*
|
|
*/
|
|
static void soctherm_oc_irq_enable(struct irq_data *data)
|
|
{
|
|
struct soctherm_oc_irq_chip_data *d = irq_data_get_irq_chip_data(data);
|
|
|
|
d->irq_enable |= BIT(data->hwirq);
|
|
}
|
|
|
|
/**
|
|
* soctherm_oc_irq_disable() - Disables overcurrent interrupt requests
|
|
* @data: The interrupt request information
|
|
*
|
|
* Clears the interrupt request enable bit of the overcurrent
|
|
* interrupt request chip data.
|
|
*
|
|
* Return: Nothing is returned (void)
|
|
*/
|
|
static void soctherm_oc_irq_disable(struct irq_data *data)
|
|
{
|
|
struct soctherm_oc_irq_chip_data *d = irq_data_get_irq_chip_data(data);
|
|
|
|
d->irq_enable &= ~BIT(data->hwirq);
|
|
}
|
|
|
|
static int soctherm_oc_irq_set_type(struct irq_data *data, unsigned int type)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* soctherm_oc_irq_map() - SOC_THERM interrupt request domain mapper
|
|
* @h: Interrupt request domain
|
|
* @virq: Virtual interrupt request number
|
|
* @hw: Hardware interrupt request number
|
|
*
|
|
* Mapping callback function for SOC_THERM's irq_domain. When a SOC_THERM
|
|
* interrupt request is called, the irq_domain takes the request's virtual
|
|
* request number (much like a virtual memory address) and maps it to a
|
|
* physical hardware request number.
|
|
*
|
|
* When a mapping doesn't already exist for a virtual request number, the
|
|
* irq_domain calls this function to associate the virtual request number with
|
|
* a hardware request number.
|
|
*
|
|
* Return: 0
|
|
*/
|
|
static int soctherm_oc_irq_map(struct irq_domain *h, unsigned int virq,
|
|
irq_hw_number_t hw)
|
|
{
|
|
struct soctherm_oc_irq_chip_data *data = h->host_data;
|
|
|
|
irq_set_chip_data(virq, data);
|
|
irq_set_chip(virq, &data->irq_chip);
|
|
irq_set_nested_thread(virq, 1);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* soctherm_irq_domain_xlate_twocell() - xlate for soctherm interrupts
|
|
* @d: Interrupt request domain
|
|
* @ctrlr: Controller device tree node
|
|
* @intspec: Array of u32s from DTs "interrupt" property
|
|
* @intsize: Number of values inside the intspec array
|
|
* @out_hwirq: HW IRQ value associated with this interrupt
|
|
* @out_type: The IRQ SENSE type for this interrupt.
|
|
*
|
|
* This Device Tree IRQ specifier translation function will translate a
|
|
* specific "interrupt" as defined by 2 DT values where the cell values map
|
|
* the hwirq number + 1 and linux irq flags. Since the output is the hwirq
|
|
* number, this function will subtract 1 from the value listed in DT.
|
|
*
|
|
* Return: 0
|
|
*/
|
|
static int soctherm_irq_domain_xlate_twocell(struct irq_domain *d,
|
|
struct device_node *ctrlr, const u32 *intspec, unsigned int intsize,
|
|
irq_hw_number_t *out_hwirq, unsigned int *out_type)
|
|
{
|
|
if (WARN_ON(intsize < 2))
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* The HW value is 1 index less than the DT IRQ values.
|
|
* i.e. OC4 goes to HW index 3.
|
|
*/
|
|
*out_hwirq = intspec[0] - 1;
|
|
*out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
|
|
return 0;
|
|
}
|
|
|
|
static const struct irq_domain_ops soctherm_oc_domain_ops = {
|
|
.map = soctherm_oc_irq_map,
|
|
.xlate = soctherm_irq_domain_xlate_twocell,
|
|
};
|
|
|
|
/**
|
|
* soctherm_oc_int_init() - Initial enabling of the over
|
|
* current interrupts
|
|
* @np: The devicetree node for soctherm
|
|
* @num_irqs: The number of new interrupt requests
|
|
*
|
|
* Sets the over current interrupt request chip data
|
|
*
|
|
* Return: 0 on success or if overcurrent interrupts are not enabled,
|
|
* -ENOMEM (out of memory), or irq_base if the function failed to
|
|
* allocate the irqs
|
|
*/
|
|
static int soctherm_oc_int_init(struct device_node *np, int num_irqs)
|
|
{
|
|
if (!num_irqs) {
|
|
pr_info("%s(): OC interrupts are not enabled\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
mutex_init(&soc_irq_cdata.irq_lock);
|
|
soc_irq_cdata.irq_enable = 0;
|
|
|
|
soc_irq_cdata.irq_chip.name = "soc_therm_oc";
|
|
soc_irq_cdata.irq_chip.irq_bus_lock = soctherm_oc_irq_lock;
|
|
soc_irq_cdata.irq_chip.irq_bus_sync_unlock =
|
|
soctherm_oc_irq_sync_unlock;
|
|
soc_irq_cdata.irq_chip.irq_disable = soctherm_oc_irq_disable;
|
|
soc_irq_cdata.irq_chip.irq_enable = soctherm_oc_irq_enable;
|
|
soc_irq_cdata.irq_chip.irq_set_type = soctherm_oc_irq_set_type;
|
|
soc_irq_cdata.irq_chip.irq_set_wake = NULL;
|
|
|
|
soc_irq_cdata.domain = irq_domain_add_linear(np, num_irqs,
|
|
&soctherm_oc_domain_ops,
|
|
&soc_irq_cdata);
|
|
|
|
if (!soc_irq_cdata.domain) {
|
|
pr_err("%s: Failed to create IRQ domain\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pr_debug("%s(): OC interrupts enabled successful\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
static int regs_show(struct seq_file *s, void *data)
|
|
{
|
|
struct platform_device *pdev = s->private;
|
|
struct tegra_soctherm *ts = platform_get_drvdata(pdev);
|
|
const struct tegra_tsensor *tsensors = ts->soc->tsensors;
|
|
const struct tegra_tsensor_group **ttgs = ts->soc->ttgs;
|
|
u32 r, state;
|
|
int i, level;
|
|
|
|
seq_puts(s, "-----TSENSE (convert HW)-----\n");
|
|
|
|
for (i = 0; i < ts->soc->num_tsensors; i++) {
|
|
r = readl(ts->regs + tsensors[i].base + SENSOR_CONFIG1);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG1_TEMP_ENABLE);
|
|
|
|
seq_printf(s, "%s: ", tsensors[i].name);
|
|
seq_printf(s, "En(%d) ", state);
|
|
|
|
if (!state) {
|
|
seq_puts(s, "\n");
|
|
continue;
|
|
}
|
|
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG1_TIDDQ_EN_MASK);
|
|
seq_printf(s, "tiddq(%d) ", state);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG1_TEN_COUNT_MASK);
|
|
seq_printf(s, "ten_count(%d) ", state);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG1_TSAMPLE_MASK);
|
|
seq_printf(s, "tsample(%d) ", state + 1);
|
|
|
|
r = readl(ts->regs + tsensors[i].base + SENSOR_STATUS1);
|
|
state = REG_GET_MASK(r, SENSOR_STATUS1_TEMP_VALID_MASK);
|
|
seq_printf(s, "Temp(%d/", state);
|
|
state = REG_GET_MASK(r, SENSOR_STATUS1_TEMP_MASK);
|
|
seq_printf(s, "%d) ", translate_temp(state));
|
|
|
|
r = readl(ts->regs + tsensors[i].base + SENSOR_STATUS0);
|
|
state = REG_GET_MASK(r, SENSOR_STATUS0_VALID_MASK);
|
|
seq_printf(s, "Capture(%d/", state);
|
|
state = REG_GET_MASK(r, SENSOR_STATUS0_CAPTURE_MASK);
|
|
seq_printf(s, "%d) ", state);
|
|
|
|
r = readl(ts->regs + tsensors[i].base + SENSOR_CONFIG0);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG0_STOP);
|
|
seq_printf(s, "Stop(%d) ", state);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG0_TALL_MASK);
|
|
seq_printf(s, "Tall(%d) ", state);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG0_TCALC_OVER);
|
|
seq_printf(s, "Over(%d/", state);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG0_OVER);
|
|
seq_printf(s, "%d/", state);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG0_CPTR_OVER);
|
|
seq_printf(s, "%d) ", state);
|
|
|
|
r = readl(ts->regs + tsensors[i].base + SENSOR_CONFIG2);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG2_THERMA_MASK);
|
|
seq_printf(s, "Therm_A/B(%d/", state);
|
|
state = REG_GET_MASK(r, SENSOR_CONFIG2_THERMB_MASK);
|
|
seq_printf(s, "%d)\n", (s16)state);
|
|
}
|
|
|
|
r = readl(ts->regs + SENSOR_PDIV);
|
|
seq_printf(s, "PDIV: 0x%x\n", r);
|
|
|
|
r = readl(ts->regs + SENSOR_HOTSPOT_OFF);
|
|
seq_printf(s, "HOTSPOT: 0x%x\n", r);
|
|
|
|
seq_puts(s, "\n");
|
|
seq_puts(s, "-----SOC_THERM-----\n");
|
|
|
|
r = readl(ts->regs + SENSOR_TEMP1);
|
|
state = REG_GET_MASK(r, SENSOR_TEMP1_CPU_TEMP_MASK);
|
|
seq_printf(s, "Temperatures: CPU(%d) ", translate_temp(state));
|
|
state = REG_GET_MASK(r, SENSOR_TEMP1_GPU_TEMP_MASK);
|
|
seq_printf(s, " GPU(%d) ", translate_temp(state));
|
|
r = readl(ts->regs + SENSOR_TEMP2);
|
|
state = REG_GET_MASK(r, SENSOR_TEMP2_PLLX_TEMP_MASK);
|
|
seq_printf(s, " PLLX(%d) ", translate_temp(state));
|
|
state = REG_GET_MASK(r, SENSOR_TEMP2_MEM_TEMP_MASK);
|
|
seq_printf(s, " MEM(%d)\n", translate_temp(state));
|
|
|
|
for (i = 0; i < ts->soc->num_ttgs; i++) {
|
|
seq_printf(s, "%s:\n", ttgs[i]->name);
|
|
for (level = 0; level < 4; level++) {
|
|
s32 v;
|
|
u32 mask;
|
|
u16 off = ttgs[i]->thermctl_lvl0_offset;
|
|
|
|
r = readl(ts->regs + THERMCTL_LVL_REG(off, level));
|
|
|
|
mask = ttgs[i]->thermctl_lvl0_up_thresh_mask;
|
|
state = REG_GET_MASK(r, mask);
|
|
v = sign_extend32(state, ts->soc->bptt - 1);
|
|
v *= ts->soc->thresh_grain;
|
|
seq_printf(s, " %d: Up/Dn(%d /", level, v);
|
|
|
|
mask = ttgs[i]->thermctl_lvl0_dn_thresh_mask;
|
|
state = REG_GET_MASK(r, mask);
|
|
v = sign_extend32(state, ts->soc->bptt - 1);
|
|
v *= ts->soc->thresh_grain;
|
|
seq_printf(s, "%d ) ", v);
|
|
|
|
mask = THERMCTL_LVL0_CPU0_EN_MASK;
|
|
state = REG_GET_MASK(r, mask);
|
|
seq_printf(s, "En(%d) ", state);
|
|
|
|
mask = THERMCTL_LVL0_CPU0_CPU_THROT_MASK;
|
|
state = REG_GET_MASK(r, mask);
|
|
seq_puts(s, "CPU Throt");
|
|
if (!state)
|
|
seq_printf(s, "(%s) ", "none");
|
|
else if (state == THERMCTL_LVL0_CPU0_CPU_THROT_LIGHT)
|
|
seq_printf(s, "(%s) ", "L");
|
|
else if (state == THERMCTL_LVL0_CPU0_CPU_THROT_HEAVY)
|
|
seq_printf(s, "(%s) ", "H");
|
|
else
|
|
seq_printf(s, "(%s) ", "H+L");
|
|
|
|
mask = THERMCTL_LVL0_CPU0_GPU_THROT_MASK;
|
|
state = REG_GET_MASK(r, mask);
|
|
seq_puts(s, "GPU Throt");
|
|
if (!state)
|
|
seq_printf(s, "(%s) ", "none");
|
|
else if (state == THERMCTL_LVL0_CPU0_GPU_THROT_LIGHT)
|
|
seq_printf(s, "(%s) ", "L");
|
|
else if (state == THERMCTL_LVL0_CPU0_GPU_THROT_HEAVY)
|
|
seq_printf(s, "(%s) ", "H");
|
|
else
|
|
seq_printf(s, "(%s) ", "H+L");
|
|
|
|
mask = THERMCTL_LVL0_CPU0_STATUS_MASK;
|
|
state = REG_GET_MASK(r, mask);
|
|
seq_printf(s, "Status(%s)\n",
|
|
state == 0 ? "LO" :
|
|
state == 1 ? "In" :
|
|
state == 2 ? "Res" : "HI");
|
|
}
|
|
}
|
|
|
|
r = readl(ts->regs + THERMCTL_STATS_CTL);
|
|
seq_printf(s, "STATS: Up(%s) Dn(%s)\n",
|
|
r & STATS_CTL_EN_UP ? "En" : "--",
|
|
r & STATS_CTL_EN_DN ? "En" : "--");
|
|
|
|
for (level = 0; level < 4; level++) {
|
|
u16 off;
|
|
|
|
off = THERMCTL_LVL0_UP_STATS;
|
|
r = readl(ts->regs + THERMCTL_LVL_REG(off, level));
|
|
seq_printf(s, " Level_%d Up(%d) ", level, r);
|
|
|
|
off = THERMCTL_LVL0_DN_STATS;
|
|
r = readl(ts->regs + THERMCTL_LVL_REG(off, level));
|
|
seq_printf(s, "Dn(%d)\n", r);
|
|
}
|
|
|
|
r = readl(ts->regs + THERMCTL_THERMTRIP_CTL);
|
|
state = REG_GET_MASK(r, ttgs[0]->thermtrip_any_en_mask);
|
|
seq_printf(s, "Thermtrip Any En(%d)\n", state);
|
|
for (i = 0; i < ts->soc->num_ttgs; i++) {
|
|
state = REG_GET_MASK(r, ttgs[i]->thermtrip_enable_mask);
|
|
seq_printf(s, " %s En(%d) ", ttgs[i]->name, state);
|
|
state = REG_GET_MASK(r, ttgs[i]->thermtrip_threshold_mask);
|
|
state *= ts->soc->thresh_grain;
|
|
seq_printf(s, "Thresh(%d)\n", state);
|
|
}
|
|
|
|
r = readl(ts->regs + THROT_GLOBAL_CFG);
|
|
seq_puts(s, "\n");
|
|
seq_printf(s, "GLOBAL THROTTLE CONFIG: 0x%08x\n", r);
|
|
|
|
seq_puts(s, "---------------------------------------------------\n");
|
|
r = readl(ts->regs + THROT_STATUS);
|
|
state = REG_GET_MASK(r, THROT_STATUS_BREACH_MASK);
|
|
seq_printf(s, "THROT STATUS: breach(%d) ", state);
|
|
state = REG_GET_MASK(r, THROT_STATUS_STATE_MASK);
|
|
seq_printf(s, "state(%d) ", state);
|
|
state = REG_GET_MASK(r, THROT_STATUS_ENABLED_MASK);
|
|
seq_printf(s, "enabled(%d)\n", state);
|
|
|
|
r = readl(ts->regs + CPU_PSKIP_STATUS);
|
|
if (ts->soc->use_ccroc) {
|
|
state = REG_GET_MASK(r, XPU_PSKIP_STATUS_ENABLED_MASK);
|
|
seq_printf(s, "CPU PSKIP STATUS: enabled(%d)\n", state);
|
|
} else {
|
|
state = REG_GET_MASK(r, XPU_PSKIP_STATUS_M_MASK);
|
|
seq_printf(s, "CPU PSKIP STATUS: M(%d) ", state);
|
|
state = REG_GET_MASK(r, XPU_PSKIP_STATUS_N_MASK);
|
|
seq_printf(s, "N(%d) ", state);
|
|
state = REG_GET_MASK(r, XPU_PSKIP_STATUS_ENABLED_MASK);
|
|
seq_printf(s, "enabled(%d)\n", state);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
DEFINE_SHOW_ATTRIBUTE(regs);
|
|
|
|
static void soctherm_debug_init(struct platform_device *pdev)
|
|
{
|
|
struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
|
|
struct dentry *root;
|
|
|
|
root = debugfs_create_dir("soctherm", NULL);
|
|
|
|
tegra->debugfs_dir = root;
|
|
|
|
debugfs_create_file("reg_contents", 0644, root, pdev, ®s_fops);
|
|
}
|
|
#else
|
|
static inline void soctherm_debug_init(struct platform_device *pdev) {}
|
|
#endif
|
|
|
|
static int soctherm_clk_enable(struct platform_device *pdev, bool enable)
|
|
{
|
|
struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
|
|
int err;
|
|
|
|
if (!tegra->clock_soctherm || !tegra->clock_tsensor)
|
|
return -EINVAL;
|
|
|
|
reset_control_assert(tegra->reset);
|
|
|
|
if (enable) {
|
|
err = clk_prepare_enable(tegra->clock_soctherm);
|
|
if (err) {
|
|
reset_control_deassert(tegra->reset);
|
|
return err;
|
|
}
|
|
|
|
err = clk_prepare_enable(tegra->clock_tsensor);
|
|
if (err) {
|
|
clk_disable_unprepare(tegra->clock_soctherm);
|
|
reset_control_deassert(tegra->reset);
|
|
return err;
|
|
}
|
|
} else {
|
|
clk_disable_unprepare(tegra->clock_tsensor);
|
|
clk_disable_unprepare(tegra->clock_soctherm);
|
|
}
|
|
|
|
reset_control_deassert(tegra->reset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int throt_get_cdev_max_state(struct thermal_cooling_device *cdev,
|
|
unsigned long *max_state)
|
|
{
|
|
*max_state = 1;
|
|
return 0;
|
|
}
|
|
|
|
static int throt_get_cdev_cur_state(struct thermal_cooling_device *cdev,
|
|
unsigned long *cur_state)
|
|
{
|
|
struct tegra_soctherm *ts = cdev->devdata;
|
|
u32 r;
|
|
|
|
r = readl(ts->regs + THROT_STATUS);
|
|
if (REG_GET_MASK(r, THROT_STATUS_STATE_MASK))
|
|
*cur_state = 1;
|
|
else
|
|
*cur_state = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int throt_set_cdev_state(struct thermal_cooling_device *cdev,
|
|
unsigned long cur_state)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static const struct thermal_cooling_device_ops throt_cooling_ops = {
|
|
.get_max_state = throt_get_cdev_max_state,
|
|
.get_cur_state = throt_get_cdev_cur_state,
|
|
.set_cur_state = throt_set_cdev_state,
|
|
};
|
|
|
|
static int soctherm_thermtrips_parse(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct tegra_soctherm *ts = dev_get_drvdata(dev);
|
|
struct tsensor_group_thermtrips *tt = ts->soc->thermtrips;
|
|
const int max_num_prop = ts->soc->num_ttgs * 2;
|
|
u32 *tlb;
|
|
int i, j, n, ret;
|
|
|
|
if (!tt)
|
|
return -ENOMEM;
|
|
|
|
n = of_property_count_u32_elems(dev->of_node, "nvidia,thermtrips");
|
|
if (n <= 0) {
|
|
dev_info(dev,
|
|
"missing thermtrips, will use critical trips as shut down temp\n");
|
|
return n;
|
|
}
|
|
|
|
n = min(max_num_prop, n);
|
|
|
|
tlb = devm_kcalloc(&pdev->dev, max_num_prop, sizeof(u32), GFP_KERNEL);
|
|
if (!tlb)
|
|
return -ENOMEM;
|
|
ret = of_property_read_u32_array(dev->of_node, "nvidia,thermtrips",
|
|
tlb, n);
|
|
if (ret) {
|
|
dev_err(dev, "invalid num ele: thermtrips:%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
i = 0;
|
|
for (j = 0; j < n; j = j + 2) {
|
|
if (tlb[j] >= TEGRA124_SOCTHERM_SENSOR_NUM)
|
|
continue;
|
|
|
|
tt[i].id = tlb[j];
|
|
tt[i].temp = tlb[j + 1];
|
|
i++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void soctherm_oc_cfg_parse(struct device *dev,
|
|
struct device_node *np_oc,
|
|
struct soctherm_throt_cfg *stc)
|
|
{
|
|
u32 val;
|
|
|
|
if (of_property_read_bool(np_oc, "nvidia,polarity-active-low"))
|
|
stc->oc_cfg.active_low = 1;
|
|
else
|
|
stc->oc_cfg.active_low = 0;
|
|
|
|
if (!of_property_read_u32(np_oc, "nvidia,count-threshold", &val)) {
|
|
stc->oc_cfg.intr_en = 1;
|
|
stc->oc_cfg.alarm_cnt_thresh = val;
|
|
}
|
|
|
|
if (!of_property_read_u32(np_oc, "nvidia,throttle-period-us", &val))
|
|
stc->oc_cfg.throt_period = val;
|
|
|
|
if (!of_property_read_u32(np_oc, "nvidia,alarm-filter", &val))
|
|
stc->oc_cfg.alarm_filter = val;
|
|
|
|
/* BRIEF throttling by default, do not support STICKY */
|
|
stc->oc_cfg.mode = OC_THROTTLE_MODE_BRIEF;
|
|
}
|
|
|
|
static int soctherm_throt_cfg_parse(struct device *dev,
|
|
struct device_node *np,
|
|
struct soctherm_throt_cfg *stc)
|
|
{
|
|
struct tegra_soctherm *ts = dev_get_drvdata(dev);
|
|
int ret;
|
|
u32 val;
|
|
|
|
ret = of_property_read_u32(np, "nvidia,priority", &val);
|
|
if (ret) {
|
|
dev_err(dev, "throttle-cfg: %s: invalid priority\n", stc->name);
|
|
return -EINVAL;
|
|
}
|
|
stc->priority = val;
|
|
|
|
ret = of_property_read_u32(np, ts->soc->use_ccroc ?
|
|
"nvidia,cpu-throt-level" :
|
|
"nvidia,cpu-throt-percent", &val);
|
|
if (!ret) {
|
|
if (ts->soc->use_ccroc &&
|
|
val <= TEGRA_SOCTHERM_THROT_LEVEL_HIGH)
|
|
stc->cpu_throt_level = val;
|
|
else if (!ts->soc->use_ccroc && val <= 100)
|
|
stc->cpu_throt_depth = val;
|
|
else
|
|
goto err;
|
|
} else {
|
|
goto err;
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "nvidia,gpu-throt-level", &val);
|
|
if (!ret && val <= TEGRA_SOCTHERM_THROT_LEVEL_HIGH)
|
|
stc->gpu_throt_level = val;
|
|
else
|
|
goto err;
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dev_err(dev, "throttle-cfg: %s: no throt prop or invalid prop\n",
|
|
stc->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* soctherm_init_hw_throt_cdev() - Parse the HW throttle configurations
|
|
* and register them as cooling devices.
|
|
* @pdev: Pointer to platform_device struct
|
|
*/
|
|
static void soctherm_init_hw_throt_cdev(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct tegra_soctherm *ts = dev_get_drvdata(dev);
|
|
struct device_node *np_stc, *np_stcc;
|
|
const char *name;
|
|
int i;
|
|
|
|
for (i = 0; i < THROTTLE_SIZE; i++) {
|
|
ts->throt_cfgs[i].name = throt_names[i];
|
|
ts->throt_cfgs[i].id = i;
|
|
ts->throt_cfgs[i].init = false;
|
|
}
|
|
|
|
np_stc = of_get_child_by_name(dev->of_node, "throttle-cfgs");
|
|
if (!np_stc) {
|
|
dev_info(dev,
|
|
"throttle-cfg: no throttle-cfgs - not enabling\n");
|
|
return;
|
|
}
|
|
|
|
for_each_child_of_node(np_stc, np_stcc) {
|
|
struct soctherm_throt_cfg *stc;
|
|
struct thermal_cooling_device *tcd;
|
|
int err;
|
|
|
|
name = np_stcc->name;
|
|
stc = find_throttle_cfg_by_name(ts, name);
|
|
if (!stc) {
|
|
dev_err(dev,
|
|
"throttle-cfg: could not find %s\n", name);
|
|
continue;
|
|
}
|
|
|
|
if (stc->init) {
|
|
dev_err(dev, "throttle-cfg: %s: redefined!\n", name);
|
|
of_node_put(np_stcc);
|
|
break;
|
|
}
|
|
|
|
err = soctherm_throt_cfg_parse(dev, np_stcc, stc);
|
|
if (err)
|
|
continue;
|
|
|
|
if (stc->id >= THROTTLE_OC1) {
|
|
soctherm_oc_cfg_parse(dev, np_stcc, stc);
|
|
stc->init = true;
|
|
} else {
|
|
|
|
tcd = thermal_of_cooling_device_register(np_stcc,
|
|
(char *)name, ts,
|
|
&throt_cooling_ops);
|
|
if (IS_ERR_OR_NULL(tcd)) {
|
|
dev_err(dev,
|
|
"throttle-cfg: %s: failed to register cooling device\n",
|
|
name);
|
|
continue;
|
|
}
|
|
stc->cdev = tcd;
|
|
stc->init = true;
|
|
}
|
|
|
|
}
|
|
|
|
of_node_put(np_stc);
|
|
}
|
|
|
|
/**
|
|
* throttlectl_cpu_level_cfg() - programs CCROC NV_THERM level config
|
|
* @ts: pointer to a struct tegra_soctherm
|
|
* @level: describing the level LOW/MED/HIGH of throttling
|
|
*
|
|
* It's necessary to set up the CPU-local CCROC NV_THERM instance with
|
|
* the M/N values desired for each level. This function does this.
|
|
*
|
|
* This function pre-programs the CCROC NV_THERM levels in terms of
|
|
* pre-configured "Low", "Medium" or "Heavy" throttle levels which are
|
|
* mapped to THROT_LEVEL_LOW, THROT_LEVEL_MED and THROT_LEVEL_HVY.
|
|
*/
|
|
static void throttlectl_cpu_level_cfg(struct tegra_soctherm *ts, int level)
|
|
{
|
|
u8 depth, dividend;
|
|
u32 r;
|
|
|
|
switch (level) {
|
|
case TEGRA_SOCTHERM_THROT_LEVEL_LOW:
|
|
depth = 50;
|
|
break;
|
|
case TEGRA_SOCTHERM_THROT_LEVEL_MED:
|
|
depth = 75;
|
|
break;
|
|
case TEGRA_SOCTHERM_THROT_LEVEL_HIGH:
|
|
depth = 80;
|
|
break;
|
|
case TEGRA_SOCTHERM_THROT_LEVEL_NONE:
|
|
return;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
dividend = THROT_DEPTH_DIVIDEND(depth);
|
|
|
|
/* setup PSKIP in ccroc nv_therm registers */
|
|
r = ccroc_readl(ts, CCROC_THROT_PSKIP_RAMP_CPU_REG(level));
|
|
r = REG_SET_MASK(r, CCROC_THROT_PSKIP_RAMP_DURATION_MASK, 0xff);
|
|
r = REG_SET_MASK(r, CCROC_THROT_PSKIP_RAMP_STEP_MASK, 0xf);
|
|
ccroc_writel(ts, r, CCROC_THROT_PSKIP_RAMP_CPU_REG(level));
|
|
|
|
r = ccroc_readl(ts, CCROC_THROT_PSKIP_CTRL_CPU_REG(level));
|
|
r = REG_SET_MASK(r, CCROC_THROT_PSKIP_CTRL_ENB_MASK, 1);
|
|
r = REG_SET_MASK(r, CCROC_THROT_PSKIP_CTRL_DIVIDEND_MASK, dividend);
|
|
r = REG_SET_MASK(r, CCROC_THROT_PSKIP_CTRL_DIVISOR_MASK, 0xff);
|
|
ccroc_writel(ts, r, CCROC_THROT_PSKIP_CTRL_CPU_REG(level));
|
|
}
|
|
|
|
/**
|
|
* throttlectl_cpu_level_select() - program CPU pulse skipper config
|
|
* @ts: pointer to a struct tegra_soctherm
|
|
* @throt: the LIGHT/HEAVY of throttle event id
|
|
*
|
|
* Pulse skippers are used to throttle clock frequencies. This
|
|
* function programs the pulse skippers based on @throt and platform
|
|
* data. This function is used on SoCs which have CPU-local pulse
|
|
* skipper control, such as T13x. It programs soctherm's interface to
|
|
* Denver:CCROC NV_THERM in terms of Low, Medium and HIGH throttling
|
|
* vectors. PSKIP_BYPASS mode is set as required per HW spec.
|
|
*/
|
|
static void throttlectl_cpu_level_select(struct tegra_soctherm *ts,
|
|
enum soctherm_throttle_id throt)
|
|
{
|
|
u32 r, throt_vect;
|
|
|
|
/* Denver:CCROC NV_THERM interface N:3 Mapping */
|
|
switch (ts->throt_cfgs[throt].cpu_throt_level) {
|
|
case TEGRA_SOCTHERM_THROT_LEVEL_LOW:
|
|
throt_vect = THROT_VECT_LOW;
|
|
break;
|
|
case TEGRA_SOCTHERM_THROT_LEVEL_MED:
|
|
throt_vect = THROT_VECT_MED;
|
|
break;
|
|
case TEGRA_SOCTHERM_THROT_LEVEL_HIGH:
|
|
throt_vect = THROT_VECT_HIGH;
|
|
break;
|
|
default:
|
|
throt_vect = THROT_VECT_NONE;
|
|
break;
|
|
}
|
|
|
|
r = readl(ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_CPU));
|
|
r = REG_SET_MASK(r, THROT_PSKIP_CTRL_ENABLE_MASK, 1);
|
|
r = REG_SET_MASK(r, THROT_PSKIP_CTRL_VECT_CPU_MASK, throt_vect);
|
|
r = REG_SET_MASK(r, THROT_PSKIP_CTRL_VECT2_CPU_MASK, throt_vect);
|
|
writel(r, ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_CPU));
|
|
|
|
/* bypass sequencer in soc_therm as it is programmed in ccroc */
|
|
r = REG_SET_MASK(0, THROT_PSKIP_RAMP_SEQ_BYPASS_MODE_MASK, 1);
|
|
writel(r, ts->regs + THROT_PSKIP_RAMP(throt, THROTTLE_DEV_CPU));
|
|
}
|
|
|
|
/**
|
|
* throttlectl_cpu_mn() - program CPU pulse skipper configuration
|
|
* @ts: pointer to a struct tegra_soctherm
|
|
* @throt: the LIGHT/HEAVY of throttle event id
|
|
*
|
|
* Pulse skippers are used to throttle clock frequencies. This
|
|
* function programs the pulse skippers based on @throt and platform
|
|
* data. This function is used for CPUs that have "remote" pulse
|
|
* skipper control, e.g., the CPU pulse skipper is controlled by the
|
|
* SOC_THERM IP block. (SOC_THERM is located outside the CPU
|
|
* complex.)
|
|
*/
|
|
static void throttlectl_cpu_mn(struct tegra_soctherm *ts,
|
|
enum soctherm_throttle_id throt)
|
|
{
|
|
u32 r;
|
|
int depth;
|
|
u8 dividend;
|
|
|
|
depth = ts->throt_cfgs[throt].cpu_throt_depth;
|
|
dividend = THROT_DEPTH_DIVIDEND(depth);
|
|
|
|
r = readl(ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_CPU));
|
|
r = REG_SET_MASK(r, THROT_PSKIP_CTRL_ENABLE_MASK, 1);
|
|
r = REG_SET_MASK(r, THROT_PSKIP_CTRL_DIVIDEND_MASK, dividend);
|
|
r = REG_SET_MASK(r, THROT_PSKIP_CTRL_DIVISOR_MASK, 0xff);
|
|
writel(r, ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_CPU));
|
|
|
|
r = readl(ts->regs + THROT_PSKIP_RAMP(throt, THROTTLE_DEV_CPU));
|
|
r = REG_SET_MASK(r, THROT_PSKIP_RAMP_DURATION_MASK, 0xff);
|
|
r = REG_SET_MASK(r, THROT_PSKIP_RAMP_STEP_MASK, 0xf);
|
|
writel(r, ts->regs + THROT_PSKIP_RAMP(throt, THROTTLE_DEV_CPU));
|
|
}
|
|
|
|
/**
|
|
* throttlectl_gpu_level_select() - selects throttling level for GPU
|
|
* @ts: pointer to a struct tegra_soctherm
|
|
* @throt: the LIGHT/HEAVY of throttle event id
|
|
*
|
|
* This function programs soctherm's interface to GK20a NV_THERM to select
|
|
* pre-configured "Low", "Medium" or "Heavy" throttle levels.
|
|
*
|
|
* Return: boolean true if HW was programmed
|
|
*/
|
|
static void throttlectl_gpu_level_select(struct tegra_soctherm *ts,
|
|
enum soctherm_throttle_id throt)
|
|
{
|
|
u32 r, level, throt_vect;
|
|
|
|
level = ts->throt_cfgs[throt].gpu_throt_level;
|
|
throt_vect = THROT_LEVEL_TO_DEPTH(level);
|
|
r = readl(ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_GPU));
|
|
r = REG_SET_MASK(r, THROT_PSKIP_CTRL_ENABLE_MASK, 1);
|
|
r = REG_SET_MASK(r, THROT_PSKIP_CTRL_VECT_GPU_MASK, throt_vect);
|
|
writel(r, ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_GPU));
|
|
}
|
|
|
|
static int soctherm_oc_cfg_program(struct tegra_soctherm *ts,
|
|
enum soctherm_throttle_id throt)
|
|
{
|
|
u32 r;
|
|
struct soctherm_oc_cfg *oc = &ts->throt_cfgs[throt].oc_cfg;
|
|
|
|
if (oc->mode == OC_THROTTLE_MODE_DISABLED)
|
|
return -EINVAL;
|
|
|
|
r = REG_SET_MASK(0, OC1_CFG_HW_RESTORE_MASK, 1);
|
|
r = REG_SET_MASK(r, OC1_CFG_THROTTLE_MODE_MASK, oc->mode);
|
|
r = REG_SET_MASK(r, OC1_CFG_ALARM_POLARITY_MASK, oc->active_low);
|
|
r = REG_SET_MASK(r, OC1_CFG_EN_THROTTLE_MASK, 1);
|
|
writel(r, ts->regs + ALARM_CFG(throt));
|
|
writel(oc->throt_period, ts->regs + ALARM_THROTTLE_PERIOD(throt));
|
|
writel(oc->alarm_cnt_thresh, ts->regs + ALARM_CNT_THRESHOLD(throt));
|
|
writel(oc->alarm_filter, ts->regs + ALARM_FILTER(throt));
|
|
soctherm_oc_intr_enable(ts, throt, oc->intr_en);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* soctherm_throttle_program() - programs pulse skippers' configuration
|
|
* @ts: pointer to a struct tegra_soctherm
|
|
* @throt: the LIGHT/HEAVY of the throttle event id.
|
|
*
|
|
* Pulse skippers are used to throttle clock frequencies.
|
|
* This function programs the pulse skippers.
|
|
*/
|
|
static void soctherm_throttle_program(struct tegra_soctherm *ts,
|
|
enum soctherm_throttle_id throt)
|
|
{
|
|
u32 r;
|
|
struct soctherm_throt_cfg stc = ts->throt_cfgs[throt];
|
|
|
|
if (!stc.init)
|
|
return;
|
|
|
|
if ((throt >= THROTTLE_OC1) && (soctherm_oc_cfg_program(ts, throt)))
|
|
return;
|
|
|
|
/* Setup PSKIP parameters */
|
|
if (ts->soc->use_ccroc)
|
|
throttlectl_cpu_level_select(ts, throt);
|
|
else
|
|
throttlectl_cpu_mn(ts, throt);
|
|
|
|
throttlectl_gpu_level_select(ts, throt);
|
|
|
|
r = REG_SET_MASK(0, THROT_PRIORITY_LITE_PRIO_MASK, stc.priority);
|
|
writel(r, ts->regs + THROT_PRIORITY_CTRL(throt));
|
|
|
|
r = REG_SET_MASK(0, THROT_DELAY_LITE_DELAY_MASK, 0);
|
|
writel(r, ts->regs + THROT_DELAY_CTRL(throt));
|
|
|
|
r = readl(ts->regs + THROT_PRIORITY_LOCK);
|
|
r = REG_GET_MASK(r, THROT_PRIORITY_LOCK_PRIORITY_MASK);
|
|
if (r >= stc.priority)
|
|
return;
|
|
r = REG_SET_MASK(0, THROT_PRIORITY_LOCK_PRIORITY_MASK,
|
|
stc.priority);
|
|
writel(r, ts->regs + THROT_PRIORITY_LOCK);
|
|
}
|
|
|
|
static void tegra_soctherm_throttle(struct device *dev)
|
|
{
|
|
struct tegra_soctherm *ts = dev_get_drvdata(dev);
|
|
u32 v;
|
|
int i;
|
|
|
|
/* configure LOW, MED and HIGH levels for CCROC NV_THERM */
|
|
if (ts->soc->use_ccroc) {
|
|
throttlectl_cpu_level_cfg(ts, TEGRA_SOCTHERM_THROT_LEVEL_LOW);
|
|
throttlectl_cpu_level_cfg(ts, TEGRA_SOCTHERM_THROT_LEVEL_MED);
|
|
throttlectl_cpu_level_cfg(ts, TEGRA_SOCTHERM_THROT_LEVEL_HIGH);
|
|
}
|
|
|
|
/* Thermal HW throttle programming */
|
|
for (i = 0; i < THROTTLE_SIZE; i++)
|
|
soctherm_throttle_program(ts, i);
|
|
|
|
v = REG_SET_MASK(0, THROT_GLOBAL_ENB_MASK, 1);
|
|
if (ts->soc->use_ccroc) {
|
|
ccroc_writel(ts, v, CCROC_GLOBAL_CFG);
|
|
|
|
v = ccroc_readl(ts, CCROC_SUPER_CCLKG_DIVIDER);
|
|
v = REG_SET_MASK(v, CDIVG_USE_THERM_CONTROLS_MASK, 1);
|
|
ccroc_writel(ts, v, CCROC_SUPER_CCLKG_DIVIDER);
|
|
} else {
|
|
writel(v, ts->regs + THROT_GLOBAL_CFG);
|
|
|
|
v = readl(ts->clk_regs + CAR_SUPER_CCLKG_DIVIDER);
|
|
v = REG_SET_MASK(v, CDIVG_USE_THERM_CONTROLS_MASK, 1);
|
|
writel(v, ts->clk_regs + CAR_SUPER_CCLKG_DIVIDER);
|
|
}
|
|
|
|
/* initialize stats collection */
|
|
v = STATS_CTL_CLR_DN | STATS_CTL_EN_DN |
|
|
STATS_CTL_CLR_UP | STATS_CTL_EN_UP;
|
|
writel(v, ts->regs + THERMCTL_STATS_CTL);
|
|
}
|
|
|
|
static int soctherm_interrupts_init(struct platform_device *pdev,
|
|
struct tegra_soctherm *tegra)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
int ret;
|
|
|
|
ret = soctherm_oc_int_init(np, TEGRA_SOC_OC_IRQ_MAX);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "soctherm_oc_int_init failed\n");
|
|
return ret;
|
|
}
|
|
|
|
tegra->thermal_irq = platform_get_irq(pdev, 0);
|
|
if (tegra->thermal_irq < 0) {
|
|
dev_dbg(&pdev->dev, "get 'thermal_irq' failed.\n");
|
|
return 0;
|
|
}
|
|
|
|
tegra->edp_irq = platform_get_irq(pdev, 1);
|
|
if (tegra->edp_irq < 0) {
|
|
dev_dbg(&pdev->dev, "get 'edp_irq' failed.\n");
|
|
return 0;
|
|
}
|
|
|
|
ret = devm_request_threaded_irq(&pdev->dev,
|
|
tegra->thermal_irq,
|
|
soctherm_thermal_isr,
|
|
soctherm_thermal_isr_thread,
|
|
IRQF_ONESHOT,
|
|
dev_name(&pdev->dev),
|
|
tegra);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "request_irq 'thermal_irq' failed.\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_request_threaded_irq(&pdev->dev,
|
|
tegra->edp_irq,
|
|
soctherm_edp_isr,
|
|
soctherm_edp_isr_thread,
|
|
IRQF_ONESHOT,
|
|
"soctherm_edp",
|
|
tegra);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "request_irq 'edp_irq' failed.\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void soctherm_init(struct platform_device *pdev)
|
|
{
|
|
struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
|
|
const struct tegra_tsensor_group **ttgs = tegra->soc->ttgs;
|
|
int i;
|
|
u32 pdiv, hotspot;
|
|
|
|
/* Initialize raw sensors */
|
|
for (i = 0; i < tegra->soc->num_tsensors; ++i)
|
|
enable_tsensor(tegra, i);
|
|
|
|
/* program pdiv and hotspot offsets per THERM */
|
|
pdiv = readl(tegra->regs + SENSOR_PDIV);
|
|
hotspot = readl(tegra->regs + SENSOR_HOTSPOT_OFF);
|
|
for (i = 0; i < tegra->soc->num_ttgs; ++i) {
|
|
pdiv = REG_SET_MASK(pdiv, ttgs[i]->pdiv_mask,
|
|
ttgs[i]->pdiv);
|
|
/* hotspot offset from PLLX, doesn't need to configure PLLX */
|
|
if (ttgs[i]->id == TEGRA124_SOCTHERM_SENSOR_PLLX)
|
|
continue;
|
|
hotspot = REG_SET_MASK(hotspot,
|
|
ttgs[i]->pllx_hotspot_mask,
|
|
ttgs[i]->pllx_hotspot_diff);
|
|
}
|
|
writel(pdiv, tegra->regs + SENSOR_PDIV);
|
|
writel(hotspot, tegra->regs + SENSOR_HOTSPOT_OFF);
|
|
|
|
/* Configure hw throttle */
|
|
tegra_soctherm_throttle(&pdev->dev);
|
|
}
|
|
|
|
static const struct of_device_id tegra_soctherm_of_match[] = {
|
|
#ifdef CONFIG_ARCH_TEGRA_124_SOC
|
|
{
|
|
.compatible = "nvidia,tegra124-soctherm",
|
|
.data = &tegra124_soctherm,
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_ARCH_TEGRA_132_SOC
|
|
{
|
|
.compatible = "nvidia,tegra132-soctherm",
|
|
.data = &tegra132_soctherm,
|
|
},
|
|
#endif
|
|
#ifdef CONFIG_ARCH_TEGRA_210_SOC
|
|
{
|
|
.compatible = "nvidia,tegra210-soctherm",
|
|
.data = &tegra210_soctherm,
|
|
},
|
|
#endif
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tegra_soctherm_of_match);
|
|
|
|
static int tegra_soctherm_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *match;
|
|
struct tegra_soctherm *tegra;
|
|
struct thermal_zone_device *z;
|
|
struct tsensor_shared_calib shared_calib;
|
|
struct resource *res;
|
|
struct tegra_soctherm_soc *soc;
|
|
unsigned int i;
|
|
int err;
|
|
|
|
match = of_match_node(tegra_soctherm_of_match, pdev->dev.of_node);
|
|
if (!match)
|
|
return -ENODEV;
|
|
|
|
soc = (struct tegra_soctherm_soc *)match->data;
|
|
if (soc->num_ttgs > TEGRA124_SOCTHERM_SENSOR_NUM)
|
|
return -EINVAL;
|
|
|
|
tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
|
|
if (!tegra)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&tegra->thermctl_lock);
|
|
dev_set_drvdata(&pdev->dev, tegra);
|
|
|
|
tegra->soc = soc;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
|
|
"soctherm-reg");
|
|
tegra->regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(tegra->regs)) {
|
|
dev_err(&pdev->dev, "can't get soctherm registers");
|
|
return PTR_ERR(tegra->regs);
|
|
}
|
|
|
|
if (!tegra->soc->use_ccroc) {
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
|
|
"car-reg");
|
|
tegra->clk_regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(tegra->clk_regs)) {
|
|
dev_err(&pdev->dev, "can't get car clk registers");
|
|
return PTR_ERR(tegra->clk_regs);
|
|
}
|
|
} else {
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
|
|
"ccroc-reg");
|
|
tegra->ccroc_regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(tegra->ccroc_regs)) {
|
|
dev_err(&pdev->dev, "can't get ccroc registers");
|
|
return PTR_ERR(tegra->ccroc_regs);
|
|
}
|
|
}
|
|
|
|
tegra->reset = devm_reset_control_get(&pdev->dev, "soctherm");
|
|
if (IS_ERR(tegra->reset)) {
|
|
dev_err(&pdev->dev, "can't get soctherm reset\n");
|
|
return PTR_ERR(tegra->reset);
|
|
}
|
|
|
|
tegra->clock_tsensor = devm_clk_get(&pdev->dev, "tsensor");
|
|
if (IS_ERR(tegra->clock_tsensor)) {
|
|
dev_err(&pdev->dev, "can't get tsensor clock\n");
|
|
return PTR_ERR(tegra->clock_tsensor);
|
|
}
|
|
|
|
tegra->clock_soctherm = devm_clk_get(&pdev->dev, "soctherm");
|
|
if (IS_ERR(tegra->clock_soctherm)) {
|
|
dev_err(&pdev->dev, "can't get soctherm clock\n");
|
|
return PTR_ERR(tegra->clock_soctherm);
|
|
}
|
|
|
|
tegra->calib = devm_kcalloc(&pdev->dev,
|
|
soc->num_tsensors, sizeof(u32),
|
|
GFP_KERNEL);
|
|
if (!tegra->calib)
|
|
return -ENOMEM;
|
|
|
|
/* calculate shared calibration data */
|
|
err = tegra_calc_shared_calib(soc->tfuse, &shared_calib);
|
|
if (err)
|
|
return err;
|
|
|
|
/* calculate tsensor calibaration data */
|
|
for (i = 0; i < soc->num_tsensors; ++i) {
|
|
err = tegra_calc_tsensor_calib(&soc->tsensors[i],
|
|
&shared_calib,
|
|
&tegra->calib[i]);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
tegra->thermctl_tzs = devm_kcalloc(&pdev->dev,
|
|
soc->num_ttgs, sizeof(z),
|
|
GFP_KERNEL);
|
|
if (!tegra->thermctl_tzs)
|
|
return -ENOMEM;
|
|
|
|
err = soctherm_clk_enable(pdev, true);
|
|
if (err)
|
|
return err;
|
|
|
|
soctherm_thermtrips_parse(pdev);
|
|
|
|
soctherm_init_hw_throt_cdev(pdev);
|
|
|
|
soctherm_init(pdev);
|
|
|
|
for (i = 0; i < soc->num_ttgs; ++i) {
|
|
struct tegra_thermctl_zone *zone =
|
|
devm_kzalloc(&pdev->dev, sizeof(*zone), GFP_KERNEL);
|
|
if (!zone) {
|
|
err = -ENOMEM;
|
|
goto disable_clocks;
|
|
}
|
|
|
|
zone->reg = tegra->regs + soc->ttgs[i]->sensor_temp_offset;
|
|
zone->dev = &pdev->dev;
|
|
zone->sg = soc->ttgs[i];
|
|
zone->ts = tegra;
|
|
|
|
z = devm_thermal_zone_of_sensor_register(&pdev->dev,
|
|
soc->ttgs[i]->id, zone,
|
|
&tegra_of_thermal_ops);
|
|
if (IS_ERR(z)) {
|
|
err = PTR_ERR(z);
|
|
dev_err(&pdev->dev, "failed to register sensor: %d\n",
|
|
err);
|
|
goto disable_clocks;
|
|
}
|
|
|
|
zone->tz = z;
|
|
tegra->thermctl_tzs[soc->ttgs[i]->id] = z;
|
|
|
|
/* Configure hw trip points */
|
|
err = tegra_soctherm_set_hwtrips(&pdev->dev, soc->ttgs[i], z);
|
|
if (err)
|
|
goto disable_clocks;
|
|
}
|
|
|
|
err = soctherm_interrupts_init(pdev, tegra);
|
|
|
|
soctherm_debug_init(pdev);
|
|
|
|
return 0;
|
|
|
|
disable_clocks:
|
|
soctherm_clk_enable(pdev, false);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int tegra_soctherm_remove(struct platform_device *pdev)
|
|
{
|
|
struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
|
|
|
|
debugfs_remove_recursive(tegra->debugfs_dir);
|
|
|
|
soctherm_clk_enable(pdev, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused soctherm_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
|
|
soctherm_clk_enable(pdev, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused soctherm_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
|
|
struct tegra_soctherm_soc *soc = tegra->soc;
|
|
int err, i;
|
|
|
|
err = soctherm_clk_enable(pdev, true);
|
|
if (err) {
|
|
dev_err(&pdev->dev,
|
|
"Resume failed: enable clocks failed\n");
|
|
return err;
|
|
}
|
|
|
|
soctherm_init(pdev);
|
|
|
|
for (i = 0; i < soc->num_ttgs; ++i) {
|
|
struct thermal_zone_device *tz;
|
|
|
|
tz = tegra->thermctl_tzs[soc->ttgs[i]->id];
|
|
err = tegra_soctherm_set_hwtrips(dev, soc->ttgs[i], tz);
|
|
if (err) {
|
|
dev_err(&pdev->dev,
|
|
"Resume failed: set hwtrips failed\n");
|
|
return err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(tegra_soctherm_pm, soctherm_suspend, soctherm_resume);
|
|
|
|
static struct platform_driver tegra_soctherm_driver = {
|
|
.probe = tegra_soctherm_probe,
|
|
.remove = tegra_soctherm_remove,
|
|
.driver = {
|
|
.name = "tegra_soctherm",
|
|
.pm = &tegra_soctherm_pm,
|
|
.of_match_table = tegra_soctherm_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(tegra_soctherm_driver);
|
|
|
|
MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>");
|
|
MODULE_DESCRIPTION("NVIDIA Tegra SOCTHERM thermal management driver");
|
|
MODULE_LICENSE("GPL v2");
|