567 строки
18 KiB
C
567 строки
18 KiB
C
/*
|
|
* ARMv6 Performance counter handling code.
|
|
*
|
|
* Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
|
|
*
|
|
* ARMv6 has 2 configurable performance counters and a single cycle counter.
|
|
* They all share a single reset bit but can be written to zero so we can use
|
|
* that for a reset.
|
|
*
|
|
* The counters can't be individually enabled or disabled so when we remove
|
|
* one event and replace it with another we could get spurious counts from the
|
|
* wrong event. However, we can take advantage of the fact that the
|
|
* performance counters can export events to the event bus, and the event bus
|
|
* itself can be monitored. This requires that we *don't* export the events to
|
|
* the event bus. The procedure for disabling a configurable counter is:
|
|
* - change the counter to count the ETMEXTOUT[0] signal (0x20). This
|
|
* effectively stops the counter from counting.
|
|
* - disable the counter's interrupt generation (each counter has it's
|
|
* own interrupt enable bit).
|
|
* Once stopped, the counter value can be written as 0 to reset.
|
|
*
|
|
* To enable a counter:
|
|
* - enable the counter's interrupt generation.
|
|
* - set the new event type.
|
|
*
|
|
* Note: the dedicated cycle counter only counts cycles and can't be
|
|
* enabled/disabled independently of the others. When we want to disable the
|
|
* cycle counter, we have to just disable the interrupt reporting and start
|
|
* ignoring that counter. When re-enabling, we have to reset the value and
|
|
* enable the interrupt.
|
|
*/
|
|
|
|
#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
|
|
enum armv6_perf_types {
|
|
ARMV6_PERFCTR_ICACHE_MISS = 0x0,
|
|
ARMV6_PERFCTR_IBUF_STALL = 0x1,
|
|
ARMV6_PERFCTR_DDEP_STALL = 0x2,
|
|
ARMV6_PERFCTR_ITLB_MISS = 0x3,
|
|
ARMV6_PERFCTR_DTLB_MISS = 0x4,
|
|
ARMV6_PERFCTR_BR_EXEC = 0x5,
|
|
ARMV6_PERFCTR_BR_MISPREDICT = 0x6,
|
|
ARMV6_PERFCTR_INSTR_EXEC = 0x7,
|
|
ARMV6_PERFCTR_DCACHE_HIT = 0x9,
|
|
ARMV6_PERFCTR_DCACHE_ACCESS = 0xA,
|
|
ARMV6_PERFCTR_DCACHE_MISS = 0xB,
|
|
ARMV6_PERFCTR_DCACHE_WBACK = 0xC,
|
|
ARMV6_PERFCTR_SW_PC_CHANGE = 0xD,
|
|
ARMV6_PERFCTR_MAIN_TLB_MISS = 0xF,
|
|
ARMV6_PERFCTR_EXPL_D_ACCESS = 0x10,
|
|
ARMV6_PERFCTR_LSU_FULL_STALL = 0x11,
|
|
ARMV6_PERFCTR_WBUF_DRAINED = 0x12,
|
|
ARMV6_PERFCTR_CPU_CYCLES = 0xFF,
|
|
ARMV6_PERFCTR_NOP = 0x20,
|
|
};
|
|
|
|
enum armv6_counters {
|
|
ARMV6_CYCLE_COUNTER = 0,
|
|
ARMV6_COUNTER0,
|
|
ARMV6_COUNTER1,
|
|
};
|
|
|
|
/*
|
|
* The hardware events that we support. We do support cache operations but
|
|
* we have harvard caches and no way to combine instruction and data
|
|
* accesses/misses in hardware.
|
|
*/
|
|
static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
|
|
PERF_MAP_ALL_UNSUPPORTED,
|
|
[PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES,
|
|
[PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC,
|
|
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
|
|
[PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT,
|
|
[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6_PERFCTR_IBUF_STALL,
|
|
[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV6_PERFCTR_LSU_FULL_STALL,
|
|
};
|
|
|
|
static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
|
|
[PERF_COUNT_HW_CACHE_OP_MAX]
|
|
[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
|
|
PERF_CACHE_MAP_ALL_UNSUPPORTED,
|
|
|
|
/*
|
|
* The performance counters don't differentiate between read and write
|
|
* accesses/misses so this isn't strictly correct, but it's the best we
|
|
* can do. Writes and reads get combined.
|
|
*/
|
|
[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS,
|
|
[C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS,
|
|
[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS,
|
|
[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS,
|
|
|
|
[C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS,
|
|
|
|
/*
|
|
* The ARM performance counters can count micro DTLB misses, micro ITLB
|
|
* misses and main TLB misses. There isn't an event for TLB misses, so
|
|
* use the micro misses here and if users want the main TLB misses they
|
|
* can use a raw counter.
|
|
*/
|
|
[C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS,
|
|
[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS,
|
|
|
|
[C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS,
|
|
[C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS,
|
|
};
|
|
|
|
enum armv6mpcore_perf_types {
|
|
ARMV6MPCORE_PERFCTR_ICACHE_MISS = 0x0,
|
|
ARMV6MPCORE_PERFCTR_IBUF_STALL = 0x1,
|
|
ARMV6MPCORE_PERFCTR_DDEP_STALL = 0x2,
|
|
ARMV6MPCORE_PERFCTR_ITLB_MISS = 0x3,
|
|
ARMV6MPCORE_PERFCTR_DTLB_MISS = 0x4,
|
|
ARMV6MPCORE_PERFCTR_BR_EXEC = 0x5,
|
|
ARMV6MPCORE_PERFCTR_BR_NOTPREDICT = 0x6,
|
|
ARMV6MPCORE_PERFCTR_BR_MISPREDICT = 0x7,
|
|
ARMV6MPCORE_PERFCTR_INSTR_EXEC = 0x8,
|
|
ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
|
|
ARMV6MPCORE_PERFCTR_DCACHE_RDMISS = 0xB,
|
|
ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
|
|
ARMV6MPCORE_PERFCTR_DCACHE_WRMISS = 0xD,
|
|
ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
|
|
ARMV6MPCORE_PERFCTR_SW_PC_CHANGE = 0xF,
|
|
ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS = 0x10,
|
|
ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
|
|
ARMV6MPCORE_PERFCTR_LSU_FULL_STALL = 0x12,
|
|
ARMV6MPCORE_PERFCTR_WBUF_DRAINED = 0x13,
|
|
ARMV6MPCORE_PERFCTR_CPU_CYCLES = 0xFF,
|
|
};
|
|
|
|
/*
|
|
* The hardware events that we support. We do support cache operations but
|
|
* we have harvard caches and no way to combine instruction and data
|
|
* accesses/misses in hardware.
|
|
*/
|
|
static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
|
|
PERF_MAP_ALL_UNSUPPORTED,
|
|
[PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
|
|
[PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
|
|
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
|
|
[PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
|
|
[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6MPCORE_PERFCTR_IBUF_STALL,
|
|
[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV6MPCORE_PERFCTR_LSU_FULL_STALL,
|
|
};
|
|
|
|
static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
|
|
[PERF_COUNT_HW_CACHE_OP_MAX]
|
|
[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
|
|
PERF_CACHE_MAP_ALL_UNSUPPORTED,
|
|
|
|
[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
|
|
[C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
|
|
[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
|
|
[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
|
|
|
|
[C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
|
|
|
|
/*
|
|
* The ARM performance counters can count micro DTLB misses, micro ITLB
|
|
* misses and main TLB misses. There isn't an event for TLB misses, so
|
|
* use the micro misses here and if users want the main TLB misses they
|
|
* can use a raw counter.
|
|
*/
|
|
[C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS,
|
|
[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS,
|
|
|
|
[C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS,
|
|
[C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS,
|
|
};
|
|
|
|
static inline unsigned long
|
|
armv6_pmcr_read(void)
|
|
{
|
|
u32 val;
|
|
asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r"(val));
|
|
return val;
|
|
}
|
|
|
|
static inline void
|
|
armv6_pmcr_write(unsigned long val)
|
|
{
|
|
asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r"(val));
|
|
}
|
|
|
|
#define ARMV6_PMCR_ENABLE (1 << 0)
|
|
#define ARMV6_PMCR_CTR01_RESET (1 << 1)
|
|
#define ARMV6_PMCR_CCOUNT_RESET (1 << 2)
|
|
#define ARMV6_PMCR_CCOUNT_DIV (1 << 3)
|
|
#define ARMV6_PMCR_COUNT0_IEN (1 << 4)
|
|
#define ARMV6_PMCR_COUNT1_IEN (1 << 5)
|
|
#define ARMV6_PMCR_CCOUNT_IEN (1 << 6)
|
|
#define ARMV6_PMCR_COUNT0_OVERFLOW (1 << 8)
|
|
#define ARMV6_PMCR_COUNT1_OVERFLOW (1 << 9)
|
|
#define ARMV6_PMCR_CCOUNT_OVERFLOW (1 << 10)
|
|
#define ARMV6_PMCR_EVT_COUNT0_SHIFT 20
|
|
#define ARMV6_PMCR_EVT_COUNT0_MASK (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
|
|
#define ARMV6_PMCR_EVT_COUNT1_SHIFT 12
|
|
#define ARMV6_PMCR_EVT_COUNT1_MASK (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
|
|
|
|
#define ARMV6_PMCR_OVERFLOWED_MASK \
|
|
(ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
|
|
ARMV6_PMCR_CCOUNT_OVERFLOW)
|
|
|
|
static inline int
|
|
armv6_pmcr_has_overflowed(unsigned long pmcr)
|
|
{
|
|
return pmcr & ARMV6_PMCR_OVERFLOWED_MASK;
|
|
}
|
|
|
|
static inline int
|
|
armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
|
|
enum armv6_counters counter)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (ARMV6_CYCLE_COUNTER == counter)
|
|
ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
|
|
else if (ARMV6_COUNTER0 == counter)
|
|
ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
|
|
else if (ARMV6_COUNTER1 == counter)
|
|
ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
|
|
else
|
|
WARN_ONCE(1, "invalid counter number (%d)\n", counter);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline u32 armv6pmu_read_counter(struct perf_event *event)
|
|
{
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
int counter = hwc->idx;
|
|
unsigned long value = 0;
|
|
|
|
if (ARMV6_CYCLE_COUNTER == counter)
|
|
asm volatile("mrc p15, 0, %0, c15, c12, 1" : "=r"(value));
|
|
else if (ARMV6_COUNTER0 == counter)
|
|
asm volatile("mrc p15, 0, %0, c15, c12, 2" : "=r"(value));
|
|
else if (ARMV6_COUNTER1 == counter)
|
|
asm volatile("mrc p15, 0, %0, c15, c12, 3" : "=r"(value));
|
|
else
|
|
WARN_ONCE(1, "invalid counter number (%d)\n", counter);
|
|
|
|
return value;
|
|
}
|
|
|
|
static inline void armv6pmu_write_counter(struct perf_event *event, u32 value)
|
|
{
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
int counter = hwc->idx;
|
|
|
|
if (ARMV6_CYCLE_COUNTER == counter)
|
|
asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value));
|
|
else if (ARMV6_COUNTER0 == counter)
|
|
asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r"(value));
|
|
else if (ARMV6_COUNTER1 == counter)
|
|
asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r"(value));
|
|
else
|
|
WARN_ONCE(1, "invalid counter number (%d)\n", counter);
|
|
}
|
|
|
|
static void armv6pmu_enable_event(struct perf_event *event)
|
|
{
|
|
unsigned long val, mask, evt, flags;
|
|
struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
|
|
int idx = hwc->idx;
|
|
|
|
if (ARMV6_CYCLE_COUNTER == idx) {
|
|
mask = 0;
|
|
evt = ARMV6_PMCR_CCOUNT_IEN;
|
|
} else if (ARMV6_COUNTER0 == idx) {
|
|
mask = ARMV6_PMCR_EVT_COUNT0_MASK;
|
|
evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
|
|
ARMV6_PMCR_COUNT0_IEN;
|
|
} else if (ARMV6_COUNTER1 == idx) {
|
|
mask = ARMV6_PMCR_EVT_COUNT1_MASK;
|
|
evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
|
|
ARMV6_PMCR_COUNT1_IEN;
|
|
} else {
|
|
WARN_ONCE(1, "invalid counter number (%d)\n", idx);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Mask out the current event and set the counter to count the event
|
|
* that we're interested in.
|
|
*/
|
|
raw_spin_lock_irqsave(&events->pmu_lock, flags);
|
|
val = armv6_pmcr_read();
|
|
val &= ~mask;
|
|
val |= evt;
|
|
armv6_pmcr_write(val);
|
|
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
|
|
}
|
|
|
|
static irqreturn_t
|
|
armv6pmu_handle_irq(int irq_num,
|
|
void *dev)
|
|
{
|
|
unsigned long pmcr = armv6_pmcr_read();
|
|
struct perf_sample_data data;
|
|
struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev;
|
|
struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events);
|
|
struct pt_regs *regs;
|
|
int idx;
|
|
|
|
if (!armv6_pmcr_has_overflowed(pmcr))
|
|
return IRQ_NONE;
|
|
|
|
regs = get_irq_regs();
|
|
|
|
/*
|
|
* The interrupts are cleared by writing the overflow flags back to
|
|
* the control register. All of the other bits don't have any effect
|
|
* if they are rewritten, so write the whole value back.
|
|
*/
|
|
armv6_pmcr_write(pmcr);
|
|
|
|
for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
|
|
struct perf_event *event = cpuc->events[idx];
|
|
struct hw_perf_event *hwc;
|
|
|
|
/* Ignore if we don't have an event. */
|
|
if (!event)
|
|
continue;
|
|
|
|
/*
|
|
* We have a single interrupt for all counters. Check that
|
|
* each counter has overflowed before we process it.
|
|
*/
|
|
if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
|
|
continue;
|
|
|
|
hwc = &event->hw;
|
|
armpmu_event_update(event);
|
|
perf_sample_data_init(&data, 0, hwc->last_period);
|
|
if (!armpmu_event_set_period(event))
|
|
continue;
|
|
|
|
if (perf_event_overflow(event, &data, regs))
|
|
cpu_pmu->disable(event);
|
|
}
|
|
|
|
/*
|
|
* Handle the pending perf events.
|
|
*
|
|
* Note: this call *must* be run with interrupts disabled. For
|
|
* platforms that can have the PMU interrupts raised as an NMI, this
|
|
* will not work.
|
|
*/
|
|
irq_work_run();
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void armv6pmu_start(struct arm_pmu *cpu_pmu)
|
|
{
|
|
unsigned long flags, val;
|
|
struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
|
|
|
|
raw_spin_lock_irqsave(&events->pmu_lock, flags);
|
|
val = armv6_pmcr_read();
|
|
val |= ARMV6_PMCR_ENABLE;
|
|
armv6_pmcr_write(val);
|
|
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
|
|
}
|
|
|
|
static void armv6pmu_stop(struct arm_pmu *cpu_pmu)
|
|
{
|
|
unsigned long flags, val;
|
|
struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
|
|
|
|
raw_spin_lock_irqsave(&events->pmu_lock, flags);
|
|
val = armv6_pmcr_read();
|
|
val &= ~ARMV6_PMCR_ENABLE;
|
|
armv6_pmcr_write(val);
|
|
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
|
|
}
|
|
|
|
static int
|
|
armv6pmu_get_event_idx(struct pmu_hw_events *cpuc,
|
|
struct perf_event *event)
|
|
{
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
/* Always place a cycle counter into the cycle counter. */
|
|
if (ARMV6_PERFCTR_CPU_CYCLES == hwc->config_base) {
|
|
if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
|
|
return -EAGAIN;
|
|
|
|
return ARMV6_CYCLE_COUNTER;
|
|
} else {
|
|
/*
|
|
* For anything other than a cycle counter, try and use
|
|
* counter0 and counter1.
|
|
*/
|
|
if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask))
|
|
return ARMV6_COUNTER1;
|
|
|
|
if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask))
|
|
return ARMV6_COUNTER0;
|
|
|
|
/* The counters are all in use. */
|
|
return -EAGAIN;
|
|
}
|
|
}
|
|
|
|
static void armv6pmu_disable_event(struct perf_event *event)
|
|
{
|
|
unsigned long val, mask, evt, flags;
|
|
struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
|
|
int idx = hwc->idx;
|
|
|
|
if (ARMV6_CYCLE_COUNTER == idx) {
|
|
mask = ARMV6_PMCR_CCOUNT_IEN;
|
|
evt = 0;
|
|
} else if (ARMV6_COUNTER0 == idx) {
|
|
mask = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
|
|
evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
|
|
} else if (ARMV6_COUNTER1 == idx) {
|
|
mask = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
|
|
evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
|
|
} else {
|
|
WARN_ONCE(1, "invalid counter number (%d)\n", idx);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Mask out the current event and set the counter to count the number
|
|
* of ETM bus signal assertion cycles. The external reporting should
|
|
* be disabled and so this should never increment.
|
|
*/
|
|
raw_spin_lock_irqsave(&events->pmu_lock, flags);
|
|
val = armv6_pmcr_read();
|
|
val &= ~mask;
|
|
val |= evt;
|
|
armv6_pmcr_write(val);
|
|
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
|
|
}
|
|
|
|
static void armv6mpcore_pmu_disable_event(struct perf_event *event)
|
|
{
|
|
unsigned long val, mask, flags, evt = 0;
|
|
struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
|
|
int idx = hwc->idx;
|
|
|
|
if (ARMV6_CYCLE_COUNTER == idx) {
|
|
mask = ARMV6_PMCR_CCOUNT_IEN;
|
|
} else if (ARMV6_COUNTER0 == idx) {
|
|
mask = ARMV6_PMCR_COUNT0_IEN;
|
|
} else if (ARMV6_COUNTER1 == idx) {
|
|
mask = ARMV6_PMCR_COUNT1_IEN;
|
|
} else {
|
|
WARN_ONCE(1, "invalid counter number (%d)\n", idx);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Unlike UP ARMv6, we don't have a way of stopping the counters. We
|
|
* simply disable the interrupt reporting.
|
|
*/
|
|
raw_spin_lock_irqsave(&events->pmu_lock, flags);
|
|
val = armv6_pmcr_read();
|
|
val &= ~mask;
|
|
val |= evt;
|
|
armv6_pmcr_write(val);
|
|
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
|
|
}
|
|
|
|
static int armv6_map_event(struct perf_event *event)
|
|
{
|
|
return armpmu_map_event(event, &armv6_perf_map,
|
|
&armv6_perf_cache_map, 0xFF);
|
|
}
|
|
|
|
static void armv6pmu_init(struct arm_pmu *cpu_pmu)
|
|
{
|
|
cpu_pmu->handle_irq = armv6pmu_handle_irq;
|
|
cpu_pmu->enable = armv6pmu_enable_event;
|
|
cpu_pmu->disable = armv6pmu_disable_event;
|
|
cpu_pmu->read_counter = armv6pmu_read_counter;
|
|
cpu_pmu->write_counter = armv6pmu_write_counter;
|
|
cpu_pmu->get_event_idx = armv6pmu_get_event_idx;
|
|
cpu_pmu->start = armv6pmu_start;
|
|
cpu_pmu->stop = armv6pmu_stop;
|
|
cpu_pmu->map_event = armv6_map_event;
|
|
cpu_pmu->num_events = 3;
|
|
cpu_pmu->max_period = (1LLU << 32) - 1;
|
|
}
|
|
|
|
static int armv6_1136_pmu_init(struct arm_pmu *cpu_pmu)
|
|
{
|
|
armv6pmu_init(cpu_pmu);
|
|
cpu_pmu->name = "armv6_1136";
|
|
return 0;
|
|
}
|
|
|
|
static int armv6_1156_pmu_init(struct arm_pmu *cpu_pmu)
|
|
{
|
|
armv6pmu_init(cpu_pmu);
|
|
cpu_pmu->name = "armv6_1156";
|
|
return 0;
|
|
}
|
|
|
|
static int armv6_1176_pmu_init(struct arm_pmu *cpu_pmu)
|
|
{
|
|
armv6pmu_init(cpu_pmu);
|
|
cpu_pmu->name = "armv6_1176";
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* ARMv6mpcore is almost identical to single core ARMv6 with the exception
|
|
* that some of the events have different enumerations and that there is no
|
|
* *hack* to stop the programmable counters. To stop the counters we simply
|
|
* disable the interrupt reporting and update the event. When unthrottling we
|
|
* reset the period and enable the interrupt reporting.
|
|
*/
|
|
|
|
static int armv6mpcore_map_event(struct perf_event *event)
|
|
{
|
|
return armpmu_map_event(event, &armv6mpcore_perf_map,
|
|
&armv6mpcore_perf_cache_map, 0xFF);
|
|
}
|
|
|
|
static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu)
|
|
{
|
|
cpu_pmu->name = "armv6_11mpcore";
|
|
cpu_pmu->handle_irq = armv6pmu_handle_irq;
|
|
cpu_pmu->enable = armv6pmu_enable_event;
|
|
cpu_pmu->disable = armv6mpcore_pmu_disable_event;
|
|
cpu_pmu->read_counter = armv6pmu_read_counter;
|
|
cpu_pmu->write_counter = armv6pmu_write_counter;
|
|
cpu_pmu->get_event_idx = armv6pmu_get_event_idx;
|
|
cpu_pmu->start = armv6pmu_start;
|
|
cpu_pmu->stop = armv6pmu_stop;
|
|
cpu_pmu->map_event = armv6mpcore_map_event;
|
|
cpu_pmu->num_events = 3;
|
|
cpu_pmu->max_period = (1LLU << 32) - 1;
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int armv6_1136_pmu_init(struct arm_pmu *cpu_pmu)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int armv6_1156_pmu_init(struct arm_pmu *cpu_pmu)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int armv6_1176_pmu_init(struct arm_pmu *cpu_pmu)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif /* CONFIG_CPU_V6 || CONFIG_CPU_V6K */
|