WSL2-Linux-Kernel/arch/unicore32/kernel/pci.c

387 строки
9.6 KiB
C

/*
* linux/arch/unicore32/kernel/pci.c
*
* Code specific to PKUnity SoC and UniCore ISA
*
* Copyright (C) 2001-2010 GUAN Xue-tao
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* PCI bios-type initialisation for PCI machines
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/io.h>
static int debug_pci;
#define CONFIG_CMD(bus, devfn, where) \
(0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
static int
puv3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *value)
{
writel(CONFIG_CMD(bus, devfn, where), PCICFG_ADDR);
switch (size) {
case 1:
*value = (readl(PCICFG_DATA) >> ((where & 3) * 8)) & 0xFF;
break;
case 2:
*value = (readl(PCICFG_DATA) >> ((where & 2) * 8)) & 0xFFFF;
break;
case 4:
*value = readl(PCICFG_DATA);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int
puv3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 value)
{
writel(CONFIG_CMD(bus, devfn, where), PCICFG_ADDR);
switch (size) {
case 1:
writel((readl(PCICFG_DATA) & ~FMASK(8, (where&3)*8))
| FIELD(value, 8, (where&3)*8), PCICFG_DATA);
break;
case 2:
writel((readl(PCICFG_DATA) & ~FMASK(16, (where&2)*8))
| FIELD(value, 16, (where&2)*8), PCICFG_DATA);
break;
case 4:
writel(value, PCICFG_DATA);
break;
}
return PCIBIOS_SUCCESSFUL;
}
struct pci_ops pci_puv3_ops = {
.read = puv3_read_config,
.write = puv3_write_config,
};
void pci_puv3_preinit(void)
{
printk(KERN_DEBUG "PCI: PKUnity PCI Controller Initializing ...\n");
/* config PCI bridge base */
writel(io_v2p(PKUNITY_PCIBRI_BASE), PCICFG_BRIBASE);
writel(0, PCIBRI_AHBCTL0);
writel(io_v2p(PKUNITY_PCIBRI_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR0);
writel(0xFFFF0000, PCIBRI_AHBAMR0);
writel(0, PCIBRI_AHBTAR0);
writel(PCIBRI_CTLx_AT, PCIBRI_AHBCTL1);
writel(io_v2p(PKUNITY_PCILIO_BASE) | PCIBRI_BARx_IO, PCIBRI_AHBBAR1);
writel(0xFFFF0000, PCIBRI_AHBAMR1);
writel(0x00000000, PCIBRI_AHBTAR1);
writel(PCIBRI_CTLx_PREF, PCIBRI_AHBCTL2);
writel(io_v2p(PKUNITY_PCIMEM_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR2);
writel(0xF8000000, PCIBRI_AHBAMR2);
writel(0, PCIBRI_AHBTAR2);
writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_BAR1);
writel(PCIBRI_CTLx_AT | PCIBRI_CTLx_PREF, PCIBRI_PCICTL0);
writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_PCIBAR0);
writel(0xF8000000, PCIBRI_PCIAMR0);
writel(PKUNITY_SDRAM_BASE, PCIBRI_PCITAR0);
writel(readl(PCIBRI_CMD) | PCIBRI_CMD_IO | PCIBRI_CMD_MEM, PCIBRI_CMD);
}
static int __init pci_puv3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (dev->bus->number == 0) {
#ifdef CONFIG_ARCH_FPGA /* 4 pci slots */
if (dev->devfn == 0x00)
return IRQ_PCIINTA;
else if (dev->devfn == 0x08)
return IRQ_PCIINTB;
else if (dev->devfn == 0x10)
return IRQ_PCIINTC;
else if (dev->devfn == 0x18)
return IRQ_PCIINTD;
#endif
#ifdef CONFIG_PUV3_DB0913 /* 3 pci slots */
if (dev->devfn == 0x30)
return IRQ_PCIINTB;
else if (dev->devfn == 0x60)
return IRQ_PCIINTC;
else if (dev->devfn == 0x58)
return IRQ_PCIINTD;
#endif
#if defined(CONFIG_PUV3_NB0916) || defined(CONFIG_PUV3_SMW0919)
/* only support 2 pci devices */
if (dev->devfn == 0x00)
return IRQ_PCIINTC; /* sata */
#endif
}
return -1;
}
/*
* Only first 128MB of memory can be accessed via PCI.
* We use GFP_DMA to allocate safe buffers to do map/unmap.
* This is really ugly and we need a better way of specifying
* DMA-capable regions of memory.
*/
void __init puv3_pci_adjust_zones(unsigned long *zone_size,
unsigned long *zhole_size)
{
unsigned int sz = SZ_128M >> PAGE_SHIFT;
/*
* Only adjust if > 128M on current system
*/
if (zone_size[0] <= sz)
return;
zone_size[1] = zone_size[0] - sz;
zone_size[0] = sz;
zhole_size[1] = zhole_size[0];
zhole_size[0] = 0;
}
/*
* If the bus contains any of these devices, then we must not turn on
* parity checking of any kind.
*/
static inline int pdev_bad_for_parity(struct pci_dev *dev)
{
return 0;
}
/*
* pcibios_fixup_bus - Called after each bus is probed,
* but before its children are examined.
*/
void pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_dev *dev;
u16 features = PCI_COMMAND_SERR
| PCI_COMMAND_PARITY
| PCI_COMMAND_FAST_BACK;
bus->resource[0] = &ioport_resource;
bus->resource[1] = &iomem_resource;
/*
* Walk the devices on this bus, working out what we can
* and can't support.
*/
list_for_each_entry(dev, &bus->devices, bus_list) {
u16 status;
pci_read_config_word(dev, PCI_STATUS, &status);
/*
* If any device on this bus does not support fast back
* to back transfers, then the bus as a whole is not able
* to support them. Having fast back to back transfers
* on saves us one PCI cycle per transaction.
*/
if (!(status & PCI_STATUS_FAST_BACK))
features &= ~PCI_COMMAND_FAST_BACK;
if (pdev_bad_for_parity(dev))
features &= ~(PCI_COMMAND_SERR
| PCI_COMMAND_PARITY);
switch (dev->class >> 8) {
case PCI_CLASS_BRIDGE_PCI:
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
status |= PCI_BRIDGE_CTL_PARITY
| PCI_BRIDGE_CTL_MASTER_ABORT;
status &= ~(PCI_BRIDGE_CTL_BUS_RESET
| PCI_BRIDGE_CTL_FAST_BACK);
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, status);
break;
case PCI_CLASS_BRIDGE_CARDBUS:
pci_read_config_word(dev, PCI_CB_BRIDGE_CONTROL,
&status);
status |= PCI_CB_BRIDGE_CTL_PARITY
| PCI_CB_BRIDGE_CTL_MASTER_ABORT;
pci_write_config_word(dev, PCI_CB_BRIDGE_CONTROL,
status);
break;
}
}
/*
* Now walk the devices again, this time setting them up.
*/
list_for_each_entry(dev, &bus->devices, bus_list) {
u16 cmd;
pci_read_config_word(dev, PCI_COMMAND, &cmd);
cmd |= features;
pci_write_config_word(dev, PCI_COMMAND, cmd);
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
L1_CACHE_BYTES >> 2);
}
/*
* Propagate the flags to the PCI bridge.
*/
if (bus->self && bus->self->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
if (features & PCI_COMMAND_FAST_BACK)
bus->bridge_ctl |= PCI_BRIDGE_CTL_FAST_BACK;
if (features & PCI_COMMAND_PARITY)
bus->bridge_ctl |= PCI_BRIDGE_CTL_PARITY;
}
/*
* Report what we did for this bus
*/
printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
}
EXPORT_SYMBOL(pcibios_fixup_bus);
static int __init pci_common_init(void)
{
struct pci_bus *puv3_bus;
pci_puv3_preinit();
puv3_bus = pci_scan_bus(0, &pci_puv3_ops, NULL);
if (!puv3_bus)
panic("PCI: unable to scan bus!");
pci_fixup_irqs(pci_common_swizzle, pci_puv3_map_irq);
if (!pci_has_flag(PCI_PROBE_ONLY)) {
pci_bus_size_bridges(puv3_bus);
pci_bus_assign_resources(puv3_bus);
}
pci_bus_add_devices(puv3_bus);
return 0;
}
subsys_initcall(pci_common_init);
char * __init pcibios_setup(char *str)
{
if (!strcmp(str, "debug")) {
debug_pci = 1;
return NULL;
} else if (!strcmp(str, "firmware")) {
pci_add_flags(PCI_PROBE_ONLY);
return NULL;
}
return str;
}
void pcibios_set_master(struct pci_dev *dev)
{
/* No special bus mastering setup handling */
}
/*
* From arch/i386/kernel/pci-i386.c:
*
* We need to avoid collisions with `mirrored' VGA ports
* and other strange ISA hardware, so we always want the
* addresses to be allocated in the 0x000-0x0ff region
* modulo 0x400.
*
* Why? Because some silly external IO cards only decode
* the low 10 bits of the IO address. The 0x00-0xff region
* is reserved for motherboard devices that decode all 16
* bits, so it's ok to allocate at, say, 0x2800-0x28ff,
* but we want to try to avoid allocating at 0x2900-0x2bff
* which might be mirrored at 0x0100-0x03ff..
*/
resource_size_t pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
resource_size_t start = res->start;
if (res->flags & IORESOURCE_IO && start & 0x300)
start = (start + 0x3ff) & ~0x3ff;
start = (start + align - 1) & ~(align - 1);
return start;
}
/**
* pcibios_enable_device - Enable I/O and memory.
* @dev: PCI device to be enabled
*/
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
u16 cmd, old_cmd;
int idx;
struct resource *r;
pci_read_config_word(dev, PCI_COMMAND, &cmd);
old_cmd = cmd;
for (idx = 0; idx < 6; idx++) {
/* Only set up the requested stuff */
if (!(mask & (1 << idx)))
continue;
r = dev->resource + idx;
if (!r->start && r->end) {
printk(KERN_ERR "PCI: Device %s not available because"
" of resource collisions\n", pci_name(dev));
return -EINVAL;
}
if (r->flags & IORESOURCE_IO)
cmd |= PCI_COMMAND_IO;
if (r->flags & IORESOURCE_MEM)
cmd |= PCI_COMMAND_MEMORY;
}
/*
* Bridges (eg, cardbus bridges) need to be fully enabled
*/
if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
if (cmd != old_cmd) {
printk("PCI: enabling device %s (%04x -> %04x)\n",
pci_name(dev), old_cmd, cmd);
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
return 0;
}
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
{
unsigned long phys;
if (mmap_state == pci_mmap_io)
return -EINVAL;
phys = vma->vm_pgoff;
/*
* Mark this as IO
*/
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
if (remap_pfn_range(vma, vma->vm_start, phys,
vma->vm_end - vma->vm_start,
vma->vm_page_prot))
return -EAGAIN;
return 0;
}