1419 строки
35 KiB
C
1419 строки
35 KiB
C
/*
|
|
* at91_can.c - CAN network driver for AT91 SoC CAN controller
|
|
*
|
|
* (C) 2007 by Hans J. Koch <hjk@hansjkoch.de>
|
|
* (C) 2008, 2009, 2010, 2011 by Marc Kleine-Budde <kernel@pengutronix.de>
|
|
*
|
|
* This software may be distributed under the terms of the GNU General
|
|
* Public License ("GPL") version 2 as distributed in the 'COPYING'
|
|
* file from the main directory of the linux kernel source.
|
|
*
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/if_arp.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/rtnetlink.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/string.h>
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/can/dev.h>
|
|
#include <linux/can/error.h>
|
|
#include <linux/can/led.h>
|
|
|
|
#define AT91_MB_MASK(i) ((1 << (i)) - 1)
|
|
|
|
/* Common registers */
|
|
enum at91_reg {
|
|
AT91_MR = 0x000,
|
|
AT91_IER = 0x004,
|
|
AT91_IDR = 0x008,
|
|
AT91_IMR = 0x00C,
|
|
AT91_SR = 0x010,
|
|
AT91_BR = 0x014,
|
|
AT91_TIM = 0x018,
|
|
AT91_TIMESTP = 0x01C,
|
|
AT91_ECR = 0x020,
|
|
AT91_TCR = 0x024,
|
|
AT91_ACR = 0x028,
|
|
};
|
|
|
|
/* Mailbox registers (0 <= i <= 15) */
|
|
#define AT91_MMR(i) (enum at91_reg)(0x200 + ((i) * 0x20))
|
|
#define AT91_MAM(i) (enum at91_reg)(0x204 + ((i) * 0x20))
|
|
#define AT91_MID(i) (enum at91_reg)(0x208 + ((i) * 0x20))
|
|
#define AT91_MFID(i) (enum at91_reg)(0x20C + ((i) * 0x20))
|
|
#define AT91_MSR(i) (enum at91_reg)(0x210 + ((i) * 0x20))
|
|
#define AT91_MDL(i) (enum at91_reg)(0x214 + ((i) * 0x20))
|
|
#define AT91_MDH(i) (enum at91_reg)(0x218 + ((i) * 0x20))
|
|
#define AT91_MCR(i) (enum at91_reg)(0x21C + ((i) * 0x20))
|
|
|
|
/* Register bits */
|
|
#define AT91_MR_CANEN BIT(0)
|
|
#define AT91_MR_LPM BIT(1)
|
|
#define AT91_MR_ABM BIT(2)
|
|
#define AT91_MR_OVL BIT(3)
|
|
#define AT91_MR_TEOF BIT(4)
|
|
#define AT91_MR_TTM BIT(5)
|
|
#define AT91_MR_TIMFRZ BIT(6)
|
|
#define AT91_MR_DRPT BIT(7)
|
|
|
|
#define AT91_SR_RBSY BIT(29)
|
|
|
|
#define AT91_MMR_PRIO_SHIFT (16)
|
|
|
|
#define AT91_MID_MIDE BIT(29)
|
|
|
|
#define AT91_MSR_MRTR BIT(20)
|
|
#define AT91_MSR_MABT BIT(22)
|
|
#define AT91_MSR_MRDY BIT(23)
|
|
#define AT91_MSR_MMI BIT(24)
|
|
|
|
#define AT91_MCR_MRTR BIT(20)
|
|
#define AT91_MCR_MTCR BIT(23)
|
|
|
|
/* Mailbox Modes */
|
|
enum at91_mb_mode {
|
|
AT91_MB_MODE_DISABLED = 0,
|
|
AT91_MB_MODE_RX = 1,
|
|
AT91_MB_MODE_RX_OVRWR = 2,
|
|
AT91_MB_MODE_TX = 3,
|
|
AT91_MB_MODE_CONSUMER = 4,
|
|
AT91_MB_MODE_PRODUCER = 5,
|
|
};
|
|
|
|
/* Interrupt mask bits */
|
|
#define AT91_IRQ_ERRA (1 << 16)
|
|
#define AT91_IRQ_WARN (1 << 17)
|
|
#define AT91_IRQ_ERRP (1 << 18)
|
|
#define AT91_IRQ_BOFF (1 << 19)
|
|
#define AT91_IRQ_SLEEP (1 << 20)
|
|
#define AT91_IRQ_WAKEUP (1 << 21)
|
|
#define AT91_IRQ_TOVF (1 << 22)
|
|
#define AT91_IRQ_TSTP (1 << 23)
|
|
#define AT91_IRQ_CERR (1 << 24)
|
|
#define AT91_IRQ_SERR (1 << 25)
|
|
#define AT91_IRQ_AERR (1 << 26)
|
|
#define AT91_IRQ_FERR (1 << 27)
|
|
#define AT91_IRQ_BERR (1 << 28)
|
|
|
|
#define AT91_IRQ_ERR_ALL (0x1fff0000)
|
|
#define AT91_IRQ_ERR_FRAME (AT91_IRQ_CERR | AT91_IRQ_SERR | \
|
|
AT91_IRQ_AERR | AT91_IRQ_FERR | AT91_IRQ_BERR)
|
|
#define AT91_IRQ_ERR_LINE (AT91_IRQ_ERRA | AT91_IRQ_WARN | \
|
|
AT91_IRQ_ERRP | AT91_IRQ_BOFF)
|
|
|
|
#define AT91_IRQ_ALL (0x1fffffff)
|
|
|
|
enum at91_devtype {
|
|
AT91_DEVTYPE_SAM9263,
|
|
AT91_DEVTYPE_SAM9X5,
|
|
};
|
|
|
|
struct at91_devtype_data {
|
|
unsigned int rx_first;
|
|
unsigned int rx_split;
|
|
unsigned int rx_last;
|
|
unsigned int tx_shift;
|
|
enum at91_devtype type;
|
|
};
|
|
|
|
struct at91_priv {
|
|
struct can_priv can; /* must be the first member! */
|
|
struct napi_struct napi;
|
|
|
|
void __iomem *reg_base;
|
|
|
|
u32 reg_sr;
|
|
unsigned int tx_next;
|
|
unsigned int tx_echo;
|
|
unsigned int rx_next;
|
|
struct at91_devtype_data devtype_data;
|
|
|
|
struct clk *clk;
|
|
struct at91_can_data *pdata;
|
|
|
|
canid_t mb0_id;
|
|
};
|
|
|
|
static const struct at91_devtype_data at91_at91sam9263_data = {
|
|
.rx_first = 1,
|
|
.rx_split = 8,
|
|
.rx_last = 11,
|
|
.tx_shift = 2,
|
|
.type = AT91_DEVTYPE_SAM9263,
|
|
};
|
|
|
|
static const struct at91_devtype_data at91_at91sam9x5_data = {
|
|
.rx_first = 0,
|
|
.rx_split = 4,
|
|
.rx_last = 5,
|
|
.tx_shift = 1,
|
|
.type = AT91_DEVTYPE_SAM9X5,
|
|
};
|
|
|
|
static const struct can_bittiming_const at91_bittiming_const = {
|
|
.name = KBUILD_MODNAME,
|
|
.tseg1_min = 4,
|
|
.tseg1_max = 16,
|
|
.tseg2_min = 2,
|
|
.tseg2_max = 8,
|
|
.sjw_max = 4,
|
|
.brp_min = 2,
|
|
.brp_max = 128,
|
|
.brp_inc = 1,
|
|
};
|
|
|
|
#define AT91_IS(_model) \
|
|
static inline int at91_is_sam##_model(const struct at91_priv *priv) \
|
|
{ \
|
|
return priv->devtype_data.type == AT91_DEVTYPE_SAM##_model; \
|
|
}
|
|
|
|
AT91_IS(9263);
|
|
AT91_IS(9X5);
|
|
|
|
static inline unsigned int get_mb_rx_first(const struct at91_priv *priv)
|
|
{
|
|
return priv->devtype_data.rx_first;
|
|
}
|
|
|
|
static inline unsigned int get_mb_rx_last(const struct at91_priv *priv)
|
|
{
|
|
return priv->devtype_data.rx_last;
|
|
}
|
|
|
|
static inline unsigned int get_mb_rx_split(const struct at91_priv *priv)
|
|
{
|
|
return priv->devtype_data.rx_split;
|
|
}
|
|
|
|
static inline unsigned int get_mb_rx_num(const struct at91_priv *priv)
|
|
{
|
|
return get_mb_rx_last(priv) - get_mb_rx_first(priv) + 1;
|
|
}
|
|
|
|
static inline unsigned int get_mb_rx_low_last(const struct at91_priv *priv)
|
|
{
|
|
return get_mb_rx_split(priv) - 1;
|
|
}
|
|
|
|
static inline unsigned int get_mb_rx_low_mask(const struct at91_priv *priv)
|
|
{
|
|
return AT91_MB_MASK(get_mb_rx_split(priv)) &
|
|
~AT91_MB_MASK(get_mb_rx_first(priv));
|
|
}
|
|
|
|
static inline unsigned int get_mb_tx_shift(const struct at91_priv *priv)
|
|
{
|
|
return priv->devtype_data.tx_shift;
|
|
}
|
|
|
|
static inline unsigned int get_mb_tx_num(const struct at91_priv *priv)
|
|
{
|
|
return 1 << get_mb_tx_shift(priv);
|
|
}
|
|
|
|
static inline unsigned int get_mb_tx_first(const struct at91_priv *priv)
|
|
{
|
|
return get_mb_rx_last(priv) + 1;
|
|
}
|
|
|
|
static inline unsigned int get_mb_tx_last(const struct at91_priv *priv)
|
|
{
|
|
return get_mb_tx_first(priv) + get_mb_tx_num(priv) - 1;
|
|
}
|
|
|
|
static inline unsigned int get_next_prio_shift(const struct at91_priv *priv)
|
|
{
|
|
return get_mb_tx_shift(priv);
|
|
}
|
|
|
|
static inline unsigned int get_next_prio_mask(const struct at91_priv *priv)
|
|
{
|
|
return 0xf << get_mb_tx_shift(priv);
|
|
}
|
|
|
|
static inline unsigned int get_next_mb_mask(const struct at91_priv *priv)
|
|
{
|
|
return AT91_MB_MASK(get_mb_tx_shift(priv));
|
|
}
|
|
|
|
static inline unsigned int get_next_mask(const struct at91_priv *priv)
|
|
{
|
|
return get_next_mb_mask(priv) | get_next_prio_mask(priv);
|
|
}
|
|
|
|
static inline unsigned int get_irq_mb_rx(const struct at91_priv *priv)
|
|
{
|
|
return AT91_MB_MASK(get_mb_rx_last(priv) + 1) &
|
|
~AT91_MB_MASK(get_mb_rx_first(priv));
|
|
}
|
|
|
|
static inline unsigned int get_irq_mb_tx(const struct at91_priv *priv)
|
|
{
|
|
return AT91_MB_MASK(get_mb_tx_last(priv) + 1) &
|
|
~AT91_MB_MASK(get_mb_tx_first(priv));
|
|
}
|
|
|
|
static inline unsigned int get_tx_next_mb(const struct at91_priv *priv)
|
|
{
|
|
return (priv->tx_next & get_next_mb_mask(priv)) + get_mb_tx_first(priv);
|
|
}
|
|
|
|
static inline unsigned int get_tx_next_prio(const struct at91_priv *priv)
|
|
{
|
|
return (priv->tx_next >> get_next_prio_shift(priv)) & 0xf;
|
|
}
|
|
|
|
static inline unsigned int get_tx_echo_mb(const struct at91_priv *priv)
|
|
{
|
|
return (priv->tx_echo & get_next_mb_mask(priv)) + get_mb_tx_first(priv);
|
|
}
|
|
|
|
static inline u32 at91_read(const struct at91_priv *priv, enum at91_reg reg)
|
|
{
|
|
return readl_relaxed(priv->reg_base + reg);
|
|
}
|
|
|
|
static inline void at91_write(const struct at91_priv *priv, enum at91_reg reg,
|
|
u32 value)
|
|
{
|
|
writel_relaxed(value, priv->reg_base + reg);
|
|
}
|
|
|
|
static inline void set_mb_mode_prio(const struct at91_priv *priv,
|
|
unsigned int mb, enum at91_mb_mode mode, int prio)
|
|
{
|
|
at91_write(priv, AT91_MMR(mb), (mode << 24) | (prio << 16));
|
|
}
|
|
|
|
static inline void set_mb_mode(const struct at91_priv *priv, unsigned int mb,
|
|
enum at91_mb_mode mode)
|
|
{
|
|
set_mb_mode_prio(priv, mb, mode, 0);
|
|
}
|
|
|
|
static inline u32 at91_can_id_to_reg_mid(canid_t can_id)
|
|
{
|
|
u32 reg_mid;
|
|
|
|
if (can_id & CAN_EFF_FLAG)
|
|
reg_mid = (can_id & CAN_EFF_MASK) | AT91_MID_MIDE;
|
|
else
|
|
reg_mid = (can_id & CAN_SFF_MASK) << 18;
|
|
|
|
return reg_mid;
|
|
}
|
|
|
|
static void at91_setup_mailboxes(struct net_device *dev)
|
|
{
|
|
struct at91_priv *priv = netdev_priv(dev);
|
|
unsigned int i;
|
|
u32 reg_mid;
|
|
|
|
/*
|
|
* Due to a chip bug (errata 50.2.6.3 & 50.3.5.3) the first
|
|
* mailbox is disabled. The next 11 mailboxes are used as a
|
|
* reception FIFO. The last mailbox is configured with
|
|
* overwrite option. The overwrite flag indicates a FIFO
|
|
* overflow.
|
|
*/
|
|
reg_mid = at91_can_id_to_reg_mid(priv->mb0_id);
|
|
for (i = 0; i < get_mb_rx_first(priv); i++) {
|
|
set_mb_mode(priv, i, AT91_MB_MODE_DISABLED);
|
|
at91_write(priv, AT91_MID(i), reg_mid);
|
|
at91_write(priv, AT91_MCR(i), 0x0); /* clear dlc */
|
|
}
|
|
|
|
for (i = get_mb_rx_first(priv); i < get_mb_rx_last(priv); i++)
|
|
set_mb_mode(priv, i, AT91_MB_MODE_RX);
|
|
set_mb_mode(priv, get_mb_rx_last(priv), AT91_MB_MODE_RX_OVRWR);
|
|
|
|
/* reset acceptance mask and id register */
|
|
for (i = get_mb_rx_first(priv); i <= get_mb_rx_last(priv); i++) {
|
|
at91_write(priv, AT91_MAM(i), 0x0);
|
|
at91_write(priv, AT91_MID(i), AT91_MID_MIDE);
|
|
}
|
|
|
|
/* The last 4 mailboxes are used for transmitting. */
|
|
for (i = get_mb_tx_first(priv); i <= get_mb_tx_last(priv); i++)
|
|
set_mb_mode_prio(priv, i, AT91_MB_MODE_TX, 0);
|
|
|
|
/* Reset tx and rx helper pointers */
|
|
priv->tx_next = priv->tx_echo = 0;
|
|
priv->rx_next = get_mb_rx_first(priv);
|
|
}
|
|
|
|
static int at91_set_bittiming(struct net_device *dev)
|
|
{
|
|
const struct at91_priv *priv = netdev_priv(dev);
|
|
const struct can_bittiming *bt = &priv->can.bittiming;
|
|
u32 reg_br;
|
|
|
|
reg_br = ((priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) ? 1 << 24 : 0) |
|
|
((bt->brp - 1) << 16) | ((bt->sjw - 1) << 12) |
|
|
((bt->prop_seg - 1) << 8) | ((bt->phase_seg1 - 1) << 4) |
|
|
((bt->phase_seg2 - 1) << 0);
|
|
|
|
netdev_info(dev, "writing AT91_BR: 0x%08x\n", reg_br);
|
|
|
|
at91_write(priv, AT91_BR, reg_br);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_get_berr_counter(const struct net_device *dev,
|
|
struct can_berr_counter *bec)
|
|
{
|
|
const struct at91_priv *priv = netdev_priv(dev);
|
|
u32 reg_ecr = at91_read(priv, AT91_ECR);
|
|
|
|
bec->rxerr = reg_ecr & 0xff;
|
|
bec->txerr = reg_ecr >> 16;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void at91_chip_start(struct net_device *dev)
|
|
{
|
|
struct at91_priv *priv = netdev_priv(dev);
|
|
u32 reg_mr, reg_ier;
|
|
|
|
/* disable interrupts */
|
|
at91_write(priv, AT91_IDR, AT91_IRQ_ALL);
|
|
|
|
/* disable chip */
|
|
reg_mr = at91_read(priv, AT91_MR);
|
|
at91_write(priv, AT91_MR, reg_mr & ~AT91_MR_CANEN);
|
|
|
|
at91_set_bittiming(dev);
|
|
at91_setup_mailboxes(dev);
|
|
|
|
/* enable chip */
|
|
if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
|
|
reg_mr = AT91_MR_CANEN | AT91_MR_ABM;
|
|
else
|
|
reg_mr = AT91_MR_CANEN;
|
|
at91_write(priv, AT91_MR, reg_mr);
|
|
|
|
priv->can.state = CAN_STATE_ERROR_ACTIVE;
|
|
|
|
/* Enable interrupts */
|
|
reg_ier = get_irq_mb_rx(priv) | AT91_IRQ_ERRP | AT91_IRQ_ERR_FRAME;
|
|
at91_write(priv, AT91_IDR, AT91_IRQ_ALL);
|
|
at91_write(priv, AT91_IER, reg_ier);
|
|
}
|
|
|
|
static void at91_chip_stop(struct net_device *dev, enum can_state state)
|
|
{
|
|
struct at91_priv *priv = netdev_priv(dev);
|
|
u32 reg_mr;
|
|
|
|
/* disable interrupts */
|
|
at91_write(priv, AT91_IDR, AT91_IRQ_ALL);
|
|
|
|
reg_mr = at91_read(priv, AT91_MR);
|
|
at91_write(priv, AT91_MR, reg_mr & ~AT91_MR_CANEN);
|
|
|
|
priv->can.state = state;
|
|
}
|
|
|
|
/*
|
|
* theory of operation:
|
|
*
|
|
* According to the datasheet priority 0 is the highest priority, 15
|
|
* is the lowest. If two mailboxes have the same priority level the
|
|
* message of the mailbox with the lowest number is sent first.
|
|
*
|
|
* We use the first TX mailbox (AT91_MB_TX_FIRST) with prio 0, then
|
|
* the next mailbox with prio 0, and so on, until all mailboxes are
|
|
* used. Then we start from the beginning with mailbox
|
|
* AT91_MB_TX_FIRST, but with prio 1, mailbox AT91_MB_TX_FIRST + 1
|
|
* prio 1. When we reach the last mailbox with prio 15, we have to
|
|
* stop sending, waiting for all messages to be delivered, then start
|
|
* again with mailbox AT91_MB_TX_FIRST prio 0.
|
|
*
|
|
* We use the priv->tx_next as counter for the next transmission
|
|
* mailbox, but without the offset AT91_MB_TX_FIRST. The lower bits
|
|
* encode the mailbox number, the upper 4 bits the mailbox priority:
|
|
*
|
|
* priv->tx_next = (prio << get_next_prio_shift(priv)) |
|
|
* (mb - get_mb_tx_first(priv));
|
|
*
|
|
*/
|
|
static netdev_tx_t at91_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct at91_priv *priv = netdev_priv(dev);
|
|
struct net_device_stats *stats = &dev->stats;
|
|
struct can_frame *cf = (struct can_frame *)skb->data;
|
|
unsigned int mb, prio;
|
|
u32 reg_mid, reg_mcr;
|
|
|
|
if (can_dropped_invalid_skb(dev, skb))
|
|
return NETDEV_TX_OK;
|
|
|
|
mb = get_tx_next_mb(priv);
|
|
prio = get_tx_next_prio(priv);
|
|
|
|
if (unlikely(!(at91_read(priv, AT91_MSR(mb)) & AT91_MSR_MRDY))) {
|
|
netif_stop_queue(dev);
|
|
|
|
netdev_err(dev, "BUG! TX buffer full when queue awake!\n");
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
reg_mid = at91_can_id_to_reg_mid(cf->can_id);
|
|
reg_mcr = ((cf->can_id & CAN_RTR_FLAG) ? AT91_MCR_MRTR : 0) |
|
|
(cf->can_dlc << 16) | AT91_MCR_MTCR;
|
|
|
|
/* disable MB while writing ID (see datasheet) */
|
|
set_mb_mode(priv, mb, AT91_MB_MODE_DISABLED);
|
|
at91_write(priv, AT91_MID(mb), reg_mid);
|
|
set_mb_mode_prio(priv, mb, AT91_MB_MODE_TX, prio);
|
|
|
|
at91_write(priv, AT91_MDL(mb), *(u32 *)(cf->data + 0));
|
|
at91_write(priv, AT91_MDH(mb), *(u32 *)(cf->data + 4));
|
|
|
|
/* This triggers transmission */
|
|
at91_write(priv, AT91_MCR(mb), reg_mcr);
|
|
|
|
stats->tx_bytes += cf->can_dlc;
|
|
|
|
/* _NOTE_: subtract AT91_MB_TX_FIRST offset from mb! */
|
|
can_put_echo_skb(skb, dev, mb - get_mb_tx_first(priv));
|
|
|
|
/*
|
|
* we have to stop the queue and deliver all messages in case
|
|
* of a prio+mb counter wrap around. This is the case if
|
|
* tx_next buffer prio and mailbox equals 0.
|
|
*
|
|
* also stop the queue if next buffer is still in use
|
|
* (== not ready)
|
|
*/
|
|
priv->tx_next++;
|
|
if (!(at91_read(priv, AT91_MSR(get_tx_next_mb(priv))) &
|
|
AT91_MSR_MRDY) ||
|
|
(priv->tx_next & get_next_mask(priv)) == 0)
|
|
netif_stop_queue(dev);
|
|
|
|
/* Enable interrupt for this mailbox */
|
|
at91_write(priv, AT91_IER, 1 << mb);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/**
|
|
* at91_activate_rx_low - activate lower rx mailboxes
|
|
* @priv: a91 context
|
|
*
|
|
* Reenables the lower mailboxes for reception of new CAN messages
|
|
*/
|
|
static inline void at91_activate_rx_low(const struct at91_priv *priv)
|
|
{
|
|
u32 mask = get_mb_rx_low_mask(priv);
|
|
at91_write(priv, AT91_TCR, mask);
|
|
}
|
|
|
|
/**
|
|
* at91_activate_rx_mb - reactive single rx mailbox
|
|
* @priv: a91 context
|
|
* @mb: mailbox to reactivate
|
|
*
|
|
* Reenables given mailbox for reception of new CAN messages
|
|
*/
|
|
static inline void at91_activate_rx_mb(const struct at91_priv *priv,
|
|
unsigned int mb)
|
|
{
|
|
u32 mask = 1 << mb;
|
|
at91_write(priv, AT91_TCR, mask);
|
|
}
|
|
|
|
/**
|
|
* at91_rx_overflow_err - send error frame due to rx overflow
|
|
* @dev: net device
|
|
*/
|
|
static void at91_rx_overflow_err(struct net_device *dev)
|
|
{
|
|
struct net_device_stats *stats = &dev->stats;
|
|
struct sk_buff *skb;
|
|
struct can_frame *cf;
|
|
|
|
netdev_dbg(dev, "RX buffer overflow\n");
|
|
stats->rx_over_errors++;
|
|
stats->rx_errors++;
|
|
|
|
skb = alloc_can_err_skb(dev, &cf);
|
|
if (unlikely(!skb))
|
|
return;
|
|
|
|
cf->can_id |= CAN_ERR_CRTL;
|
|
cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
|
|
|
|
stats->rx_packets++;
|
|
stats->rx_bytes += cf->can_dlc;
|
|
netif_receive_skb(skb);
|
|
}
|
|
|
|
/**
|
|
* at91_read_mb - read CAN msg from mailbox (lowlevel impl)
|
|
* @dev: net device
|
|
* @mb: mailbox number to read from
|
|
* @cf: can frame where to store message
|
|
*
|
|
* Reads a CAN message from the given mailbox and stores data into
|
|
* given can frame. "mb" and "cf" must be valid.
|
|
*/
|
|
static void at91_read_mb(struct net_device *dev, unsigned int mb,
|
|
struct can_frame *cf)
|
|
{
|
|
const struct at91_priv *priv = netdev_priv(dev);
|
|
u32 reg_msr, reg_mid;
|
|
|
|
reg_mid = at91_read(priv, AT91_MID(mb));
|
|
if (reg_mid & AT91_MID_MIDE)
|
|
cf->can_id = ((reg_mid >> 0) & CAN_EFF_MASK) | CAN_EFF_FLAG;
|
|
else
|
|
cf->can_id = (reg_mid >> 18) & CAN_SFF_MASK;
|
|
|
|
reg_msr = at91_read(priv, AT91_MSR(mb));
|
|
cf->can_dlc = get_can_dlc((reg_msr >> 16) & 0xf);
|
|
|
|
if (reg_msr & AT91_MSR_MRTR)
|
|
cf->can_id |= CAN_RTR_FLAG;
|
|
else {
|
|
*(u32 *)(cf->data + 0) = at91_read(priv, AT91_MDL(mb));
|
|
*(u32 *)(cf->data + 4) = at91_read(priv, AT91_MDH(mb));
|
|
}
|
|
|
|
/* allow RX of extended frames */
|
|
at91_write(priv, AT91_MID(mb), AT91_MID_MIDE);
|
|
|
|
if (unlikely(mb == get_mb_rx_last(priv) && reg_msr & AT91_MSR_MMI))
|
|
at91_rx_overflow_err(dev);
|
|
}
|
|
|
|
/**
|
|
* at91_read_msg - read CAN message from mailbox
|
|
* @dev: net device
|
|
* @mb: mail box to read from
|
|
*
|
|
* Reads a CAN message from given mailbox, and put into linux network
|
|
* RX queue, does all housekeeping chores (stats, ...)
|
|
*/
|
|
static void at91_read_msg(struct net_device *dev, unsigned int mb)
|
|
{
|
|
struct net_device_stats *stats = &dev->stats;
|
|
struct can_frame *cf;
|
|
struct sk_buff *skb;
|
|
|
|
skb = alloc_can_skb(dev, &cf);
|
|
if (unlikely(!skb)) {
|
|
stats->rx_dropped++;
|
|
return;
|
|
}
|
|
|
|
at91_read_mb(dev, mb, cf);
|
|
|
|
stats->rx_packets++;
|
|
stats->rx_bytes += cf->can_dlc;
|
|
netif_receive_skb(skb);
|
|
|
|
can_led_event(dev, CAN_LED_EVENT_RX);
|
|
}
|
|
|
|
/**
|
|
* at91_poll_rx - read multiple CAN messages from mailboxes
|
|
* @dev: net device
|
|
* @quota: max number of pkgs we're allowed to receive
|
|
*
|
|
* Theory of Operation:
|
|
*
|
|
* About 3/4 of the mailboxes (get_mb_rx_first()...get_mb_rx_last())
|
|
* on the chip are reserved for RX. We split them into 2 groups. The
|
|
* lower group ranges from get_mb_rx_first() to get_mb_rx_low_last().
|
|
*
|
|
* Like it or not, but the chip always saves a received CAN message
|
|
* into the first free mailbox it finds (starting with the
|
|
* lowest). This makes it very difficult to read the messages in the
|
|
* right order from the chip. This is how we work around that problem:
|
|
*
|
|
* The first message goes into mb nr. 1 and issues an interrupt. All
|
|
* rx ints are disabled in the interrupt handler and a napi poll is
|
|
* scheduled. We read the mailbox, but do _not_ reenable the mb (to
|
|
* receive another message).
|
|
*
|
|
* lower mbxs upper
|
|
* ____^______ __^__
|
|
* / \ / \
|
|
* +-+-+-+-+-+-+-+-++-+-+-+-+
|
|
* | |x|x|x|x|x|x|x|| | | | |
|
|
* +-+-+-+-+-+-+-+-++-+-+-+-+
|
|
* 0 0 0 0 0 0 0 0 0 0 1 1 \ mail
|
|
* 0 1 2 3 4 5 6 7 8 9 0 1 / box
|
|
* ^
|
|
* |
|
|
* \
|
|
* unused, due to chip bug
|
|
*
|
|
* The variable priv->rx_next points to the next mailbox to read a
|
|
* message from. As long we're in the lower mailboxes we just read the
|
|
* mailbox but not reenable it.
|
|
*
|
|
* With completion of the last of the lower mailboxes, we reenable the
|
|
* whole first group, but continue to look for filled mailboxes in the
|
|
* upper mailboxes. Imagine the second group like overflow mailboxes,
|
|
* which takes CAN messages if the lower goup is full. While in the
|
|
* upper group we reenable the mailbox right after reading it. Giving
|
|
* the chip more room to store messages.
|
|
*
|
|
* After finishing we look again in the lower group if we've still
|
|
* quota.
|
|
*
|
|
*/
|
|
static int at91_poll_rx(struct net_device *dev, int quota)
|
|
{
|
|
struct at91_priv *priv = netdev_priv(dev);
|
|
u32 reg_sr = at91_read(priv, AT91_SR);
|
|
const unsigned long *addr = (unsigned long *)®_sr;
|
|
unsigned int mb;
|
|
int received = 0;
|
|
|
|
if (priv->rx_next > get_mb_rx_low_last(priv) &&
|
|
reg_sr & get_mb_rx_low_mask(priv))
|
|
netdev_info(dev,
|
|
"order of incoming frames cannot be guaranteed\n");
|
|
|
|
again:
|
|
for (mb = find_next_bit(addr, get_mb_tx_first(priv), priv->rx_next);
|
|
mb < get_mb_tx_first(priv) && quota > 0;
|
|
reg_sr = at91_read(priv, AT91_SR),
|
|
mb = find_next_bit(addr, get_mb_tx_first(priv), ++priv->rx_next)) {
|
|
at91_read_msg(dev, mb);
|
|
|
|
/* reactivate mailboxes */
|
|
if (mb == get_mb_rx_low_last(priv))
|
|
/* all lower mailboxed, if just finished it */
|
|
at91_activate_rx_low(priv);
|
|
else if (mb > get_mb_rx_low_last(priv))
|
|
/* only the mailbox we read */
|
|
at91_activate_rx_mb(priv, mb);
|
|
|
|
received++;
|
|
quota--;
|
|
}
|
|
|
|
/* upper group completed, look again in lower */
|
|
if (priv->rx_next > get_mb_rx_low_last(priv) &&
|
|
mb > get_mb_rx_last(priv)) {
|
|
priv->rx_next = get_mb_rx_first(priv);
|
|
if (quota > 0)
|
|
goto again;
|
|
}
|
|
|
|
return received;
|
|
}
|
|
|
|
static void at91_poll_err_frame(struct net_device *dev,
|
|
struct can_frame *cf, u32 reg_sr)
|
|
{
|
|
struct at91_priv *priv = netdev_priv(dev);
|
|
|
|
/* CRC error */
|
|
if (reg_sr & AT91_IRQ_CERR) {
|
|
netdev_dbg(dev, "CERR irq\n");
|
|
dev->stats.rx_errors++;
|
|
priv->can.can_stats.bus_error++;
|
|
cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
|
|
}
|
|
|
|
/* Stuffing Error */
|
|
if (reg_sr & AT91_IRQ_SERR) {
|
|
netdev_dbg(dev, "SERR irq\n");
|
|
dev->stats.rx_errors++;
|
|
priv->can.can_stats.bus_error++;
|
|
cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
|
|
cf->data[2] |= CAN_ERR_PROT_STUFF;
|
|
}
|
|
|
|
/* Acknowledgement Error */
|
|
if (reg_sr & AT91_IRQ_AERR) {
|
|
netdev_dbg(dev, "AERR irq\n");
|
|
dev->stats.tx_errors++;
|
|
cf->can_id |= CAN_ERR_ACK;
|
|
}
|
|
|
|
/* Form error */
|
|
if (reg_sr & AT91_IRQ_FERR) {
|
|
netdev_dbg(dev, "FERR irq\n");
|
|
dev->stats.rx_errors++;
|
|
priv->can.can_stats.bus_error++;
|
|
cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
|
|
cf->data[2] |= CAN_ERR_PROT_FORM;
|
|
}
|
|
|
|
/* Bit Error */
|
|
if (reg_sr & AT91_IRQ_BERR) {
|
|
netdev_dbg(dev, "BERR irq\n");
|
|
dev->stats.tx_errors++;
|
|
priv->can.can_stats.bus_error++;
|
|
cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
|
|
cf->data[2] |= CAN_ERR_PROT_BIT;
|
|
}
|
|
}
|
|
|
|
static int at91_poll_err(struct net_device *dev, int quota, u32 reg_sr)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct can_frame *cf;
|
|
|
|
if (quota == 0)
|
|
return 0;
|
|
|
|
skb = alloc_can_err_skb(dev, &cf);
|
|
if (unlikely(!skb))
|
|
return 0;
|
|
|
|
at91_poll_err_frame(dev, cf, reg_sr);
|
|
|
|
dev->stats.rx_packets++;
|
|
dev->stats.rx_bytes += cf->can_dlc;
|
|
netif_receive_skb(skb);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int at91_poll(struct napi_struct *napi, int quota)
|
|
{
|
|
struct net_device *dev = napi->dev;
|
|
const struct at91_priv *priv = netdev_priv(dev);
|
|
u32 reg_sr = at91_read(priv, AT91_SR);
|
|
int work_done = 0;
|
|
|
|
if (reg_sr & get_irq_mb_rx(priv))
|
|
work_done += at91_poll_rx(dev, quota - work_done);
|
|
|
|
/*
|
|
* The error bits are clear on read,
|
|
* so use saved value from irq handler.
|
|
*/
|
|
reg_sr |= priv->reg_sr;
|
|
if (reg_sr & AT91_IRQ_ERR_FRAME)
|
|
work_done += at91_poll_err(dev, quota - work_done, reg_sr);
|
|
|
|
if (work_done < quota) {
|
|
/* enable IRQs for frame errors and all mailboxes >= rx_next */
|
|
u32 reg_ier = AT91_IRQ_ERR_FRAME;
|
|
reg_ier |= get_irq_mb_rx(priv) & ~AT91_MB_MASK(priv->rx_next);
|
|
|
|
napi_complete(napi);
|
|
at91_write(priv, AT91_IER, reg_ier);
|
|
}
|
|
|
|
return work_done;
|
|
}
|
|
|
|
/*
|
|
* theory of operation:
|
|
*
|
|
* priv->tx_echo holds the number of the oldest can_frame put for
|
|
* transmission into the hardware, but not yet ACKed by the CAN tx
|
|
* complete IRQ.
|
|
*
|
|
* We iterate from priv->tx_echo to priv->tx_next and check if the
|
|
* packet has been transmitted, echo it back to the CAN framework. If
|
|
* we discover a not yet transmitted package, stop looking for more.
|
|
*
|
|
*/
|
|
static void at91_irq_tx(struct net_device *dev, u32 reg_sr)
|
|
{
|
|
struct at91_priv *priv = netdev_priv(dev);
|
|
u32 reg_msr;
|
|
unsigned int mb;
|
|
|
|
/* masking of reg_sr not needed, already done by at91_irq */
|
|
|
|
for (/* nix */; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) {
|
|
mb = get_tx_echo_mb(priv);
|
|
|
|
/* no event in mailbox? */
|
|
if (!(reg_sr & (1 << mb)))
|
|
break;
|
|
|
|
/* Disable irq for this TX mailbox */
|
|
at91_write(priv, AT91_IDR, 1 << mb);
|
|
|
|
/*
|
|
* only echo if mailbox signals us a transfer
|
|
* complete (MSR_MRDY). Otherwise it's a tansfer
|
|
* abort. "can_bus_off()" takes care about the skbs
|
|
* parked in the echo queue.
|
|
*/
|
|
reg_msr = at91_read(priv, AT91_MSR(mb));
|
|
if (likely(reg_msr & AT91_MSR_MRDY &&
|
|
~reg_msr & AT91_MSR_MABT)) {
|
|
/* _NOTE_: subtract AT91_MB_TX_FIRST offset from mb! */
|
|
can_get_echo_skb(dev, mb - get_mb_tx_first(priv));
|
|
dev->stats.tx_packets++;
|
|
can_led_event(dev, CAN_LED_EVENT_TX);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* restart queue if we don't have a wrap around but restart if
|
|
* we get a TX int for the last can frame directly before a
|
|
* wrap around.
|
|
*/
|
|
if ((priv->tx_next & get_next_mask(priv)) != 0 ||
|
|
(priv->tx_echo & get_next_mask(priv)) == 0)
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
static void at91_irq_err_state(struct net_device *dev,
|
|
struct can_frame *cf, enum can_state new_state)
|
|
{
|
|
struct at91_priv *priv = netdev_priv(dev);
|
|
u32 reg_idr = 0, reg_ier = 0;
|
|
struct can_berr_counter bec;
|
|
|
|
at91_get_berr_counter(dev, &bec);
|
|
|
|
switch (priv->can.state) {
|
|
case CAN_STATE_ERROR_ACTIVE:
|
|
/*
|
|
* from: ERROR_ACTIVE
|
|
* to : ERROR_WARNING, ERROR_PASSIVE, BUS_OFF
|
|
* => : there was a warning int
|
|
*/
|
|
if (new_state >= CAN_STATE_ERROR_WARNING &&
|
|
new_state <= CAN_STATE_BUS_OFF) {
|
|
netdev_dbg(dev, "Error Warning IRQ\n");
|
|
priv->can.can_stats.error_warning++;
|
|
|
|
cf->can_id |= CAN_ERR_CRTL;
|
|
cf->data[1] = (bec.txerr > bec.rxerr) ?
|
|
CAN_ERR_CRTL_TX_WARNING :
|
|
CAN_ERR_CRTL_RX_WARNING;
|
|
}
|
|
case CAN_STATE_ERROR_WARNING: /* fallthrough */
|
|
/*
|
|
* from: ERROR_ACTIVE, ERROR_WARNING
|
|
* to : ERROR_PASSIVE, BUS_OFF
|
|
* => : error passive int
|
|
*/
|
|
if (new_state >= CAN_STATE_ERROR_PASSIVE &&
|
|
new_state <= CAN_STATE_BUS_OFF) {
|
|
netdev_dbg(dev, "Error Passive IRQ\n");
|
|
priv->can.can_stats.error_passive++;
|
|
|
|
cf->can_id |= CAN_ERR_CRTL;
|
|
cf->data[1] = (bec.txerr > bec.rxerr) ?
|
|
CAN_ERR_CRTL_TX_PASSIVE :
|
|
CAN_ERR_CRTL_RX_PASSIVE;
|
|
}
|
|
break;
|
|
case CAN_STATE_BUS_OFF:
|
|
/*
|
|
* from: BUS_OFF
|
|
* to : ERROR_ACTIVE, ERROR_WARNING, ERROR_PASSIVE
|
|
*/
|
|
if (new_state <= CAN_STATE_ERROR_PASSIVE) {
|
|
cf->can_id |= CAN_ERR_RESTARTED;
|
|
|
|
netdev_dbg(dev, "restarted\n");
|
|
priv->can.can_stats.restarts++;
|
|
|
|
netif_carrier_on(dev);
|
|
netif_wake_queue(dev);
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
|
|
/* process state changes depending on the new state */
|
|
switch (new_state) {
|
|
case CAN_STATE_ERROR_ACTIVE:
|
|
/*
|
|
* actually we want to enable AT91_IRQ_WARN here, but
|
|
* it screws up the system under certain
|
|
* circumstances. so just enable AT91_IRQ_ERRP, thus
|
|
* the "fallthrough"
|
|
*/
|
|
netdev_dbg(dev, "Error Active\n");
|
|
cf->can_id |= CAN_ERR_PROT;
|
|
cf->data[2] = CAN_ERR_PROT_ACTIVE;
|
|
case CAN_STATE_ERROR_WARNING: /* fallthrough */
|
|
reg_idr = AT91_IRQ_ERRA | AT91_IRQ_WARN | AT91_IRQ_BOFF;
|
|
reg_ier = AT91_IRQ_ERRP;
|
|
break;
|
|
case CAN_STATE_ERROR_PASSIVE:
|
|
reg_idr = AT91_IRQ_ERRA | AT91_IRQ_WARN | AT91_IRQ_ERRP;
|
|
reg_ier = AT91_IRQ_BOFF;
|
|
break;
|
|
case CAN_STATE_BUS_OFF:
|
|
reg_idr = AT91_IRQ_ERRA | AT91_IRQ_ERRP |
|
|
AT91_IRQ_WARN | AT91_IRQ_BOFF;
|
|
reg_ier = 0;
|
|
|
|
cf->can_id |= CAN_ERR_BUSOFF;
|
|
|
|
netdev_dbg(dev, "bus-off\n");
|
|
netif_carrier_off(dev);
|
|
priv->can.can_stats.bus_off++;
|
|
|
|
/* turn off chip, if restart is disabled */
|
|
if (!priv->can.restart_ms) {
|
|
at91_chip_stop(dev, CAN_STATE_BUS_OFF);
|
|
return;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
at91_write(priv, AT91_IDR, reg_idr);
|
|
at91_write(priv, AT91_IER, reg_ier);
|
|
}
|
|
|
|
static int at91_get_state_by_bec(const struct net_device *dev,
|
|
enum can_state *state)
|
|
{
|
|
struct can_berr_counter bec;
|
|
int err;
|
|
|
|
err = at91_get_berr_counter(dev, &bec);
|
|
if (err)
|
|
return err;
|
|
|
|
if (bec.txerr < 96 && bec.rxerr < 96)
|
|
*state = CAN_STATE_ERROR_ACTIVE;
|
|
else if (bec.txerr < 128 && bec.rxerr < 128)
|
|
*state = CAN_STATE_ERROR_WARNING;
|
|
else if (bec.txerr < 256 && bec.rxerr < 256)
|
|
*state = CAN_STATE_ERROR_PASSIVE;
|
|
else
|
|
*state = CAN_STATE_BUS_OFF;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void at91_irq_err(struct net_device *dev)
|
|
{
|
|
struct at91_priv *priv = netdev_priv(dev);
|
|
struct sk_buff *skb;
|
|
struct can_frame *cf;
|
|
enum can_state new_state;
|
|
u32 reg_sr;
|
|
int err;
|
|
|
|
if (at91_is_sam9263(priv)) {
|
|
reg_sr = at91_read(priv, AT91_SR);
|
|
|
|
/* we need to look at the unmasked reg_sr */
|
|
if (unlikely(reg_sr & AT91_IRQ_BOFF))
|
|
new_state = CAN_STATE_BUS_OFF;
|
|
else if (unlikely(reg_sr & AT91_IRQ_ERRP))
|
|
new_state = CAN_STATE_ERROR_PASSIVE;
|
|
else if (unlikely(reg_sr & AT91_IRQ_WARN))
|
|
new_state = CAN_STATE_ERROR_WARNING;
|
|
else if (likely(reg_sr & AT91_IRQ_ERRA))
|
|
new_state = CAN_STATE_ERROR_ACTIVE;
|
|
else {
|
|
netdev_err(dev, "BUG! hardware in undefined state\n");
|
|
return;
|
|
}
|
|
} else {
|
|
err = at91_get_state_by_bec(dev, &new_state);
|
|
if (err)
|
|
return;
|
|
}
|
|
|
|
/* state hasn't changed */
|
|
if (likely(new_state == priv->can.state))
|
|
return;
|
|
|
|
skb = alloc_can_err_skb(dev, &cf);
|
|
if (unlikely(!skb))
|
|
return;
|
|
|
|
at91_irq_err_state(dev, cf, new_state);
|
|
|
|
dev->stats.rx_packets++;
|
|
dev->stats.rx_bytes += cf->can_dlc;
|
|
netif_rx(skb);
|
|
|
|
priv->can.state = new_state;
|
|
}
|
|
|
|
/*
|
|
* interrupt handler
|
|
*/
|
|
static irqreturn_t at91_irq(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct at91_priv *priv = netdev_priv(dev);
|
|
irqreturn_t handled = IRQ_NONE;
|
|
u32 reg_sr, reg_imr;
|
|
|
|
reg_sr = at91_read(priv, AT91_SR);
|
|
reg_imr = at91_read(priv, AT91_IMR);
|
|
|
|
/* Ignore masked interrupts */
|
|
reg_sr &= reg_imr;
|
|
if (!reg_sr)
|
|
goto exit;
|
|
|
|
handled = IRQ_HANDLED;
|
|
|
|
/* Receive or error interrupt? -> napi */
|
|
if (reg_sr & (get_irq_mb_rx(priv) | AT91_IRQ_ERR_FRAME)) {
|
|
/*
|
|
* The error bits are clear on read,
|
|
* save for later use.
|
|
*/
|
|
priv->reg_sr = reg_sr;
|
|
at91_write(priv, AT91_IDR,
|
|
get_irq_mb_rx(priv) | AT91_IRQ_ERR_FRAME);
|
|
napi_schedule(&priv->napi);
|
|
}
|
|
|
|
/* Transmission complete interrupt */
|
|
if (reg_sr & get_irq_mb_tx(priv))
|
|
at91_irq_tx(dev, reg_sr);
|
|
|
|
at91_irq_err(dev);
|
|
|
|
exit:
|
|
return handled;
|
|
}
|
|
|
|
static int at91_open(struct net_device *dev)
|
|
{
|
|
struct at91_priv *priv = netdev_priv(dev);
|
|
int err;
|
|
|
|
err = clk_prepare_enable(priv->clk);
|
|
if (err)
|
|
return err;
|
|
|
|
/* check or determine and set bittime */
|
|
err = open_candev(dev);
|
|
if (err)
|
|
goto out;
|
|
|
|
/* register interrupt handler */
|
|
if (request_irq(dev->irq, at91_irq, IRQF_SHARED,
|
|
dev->name, dev)) {
|
|
err = -EAGAIN;
|
|
goto out_close;
|
|
}
|
|
|
|
can_led_event(dev, CAN_LED_EVENT_OPEN);
|
|
|
|
/* start chip and queuing */
|
|
at91_chip_start(dev);
|
|
napi_enable(&priv->napi);
|
|
netif_start_queue(dev);
|
|
|
|
return 0;
|
|
|
|
out_close:
|
|
close_candev(dev);
|
|
out:
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* stop CAN bus activity
|
|
*/
|
|
static int at91_close(struct net_device *dev)
|
|
{
|
|
struct at91_priv *priv = netdev_priv(dev);
|
|
|
|
netif_stop_queue(dev);
|
|
napi_disable(&priv->napi);
|
|
at91_chip_stop(dev, CAN_STATE_STOPPED);
|
|
|
|
free_irq(dev->irq, dev);
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
close_candev(dev);
|
|
|
|
can_led_event(dev, CAN_LED_EVENT_STOP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_set_mode(struct net_device *dev, enum can_mode mode)
|
|
{
|
|
switch (mode) {
|
|
case CAN_MODE_START:
|
|
at91_chip_start(dev);
|
|
netif_wake_queue(dev);
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct net_device_ops at91_netdev_ops = {
|
|
.ndo_open = at91_open,
|
|
.ndo_stop = at91_close,
|
|
.ndo_start_xmit = at91_start_xmit,
|
|
.ndo_change_mtu = can_change_mtu,
|
|
};
|
|
|
|
static ssize_t at91_sysfs_show_mb0_id(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct at91_priv *priv = netdev_priv(to_net_dev(dev));
|
|
|
|
if (priv->mb0_id & CAN_EFF_FLAG)
|
|
return snprintf(buf, PAGE_SIZE, "0x%08x\n", priv->mb0_id);
|
|
else
|
|
return snprintf(buf, PAGE_SIZE, "0x%03x\n", priv->mb0_id);
|
|
}
|
|
|
|
static ssize_t at91_sysfs_set_mb0_id(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct net_device *ndev = to_net_dev(dev);
|
|
struct at91_priv *priv = netdev_priv(ndev);
|
|
unsigned long can_id;
|
|
ssize_t ret;
|
|
int err;
|
|
|
|
rtnl_lock();
|
|
|
|
if (ndev->flags & IFF_UP) {
|
|
ret = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
err = kstrtoul(buf, 0, &can_id);
|
|
if (err) {
|
|
ret = err;
|
|
goto out;
|
|
}
|
|
|
|
if (can_id & CAN_EFF_FLAG)
|
|
can_id &= CAN_EFF_MASK | CAN_EFF_FLAG;
|
|
else
|
|
can_id &= CAN_SFF_MASK;
|
|
|
|
priv->mb0_id = can_id;
|
|
ret = count;
|
|
|
|
out:
|
|
rtnl_unlock();
|
|
return ret;
|
|
}
|
|
|
|
static DEVICE_ATTR(mb0_id, S_IWUSR | S_IRUGO,
|
|
at91_sysfs_show_mb0_id, at91_sysfs_set_mb0_id);
|
|
|
|
static struct attribute *at91_sysfs_attrs[] = {
|
|
&dev_attr_mb0_id.attr,
|
|
NULL,
|
|
};
|
|
|
|
static struct attribute_group at91_sysfs_attr_group = {
|
|
.attrs = at91_sysfs_attrs,
|
|
};
|
|
|
|
#if defined(CONFIG_OF)
|
|
static const struct of_device_id at91_can_dt_ids[] = {
|
|
{
|
|
.compatible = "atmel,at91sam9x5-can",
|
|
.data = &at91_at91sam9x5_data,
|
|
}, {
|
|
.compatible = "atmel,at91sam9263-can",
|
|
.data = &at91_at91sam9263_data,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, at91_can_dt_ids);
|
|
#endif
|
|
|
|
static const struct at91_devtype_data *at91_can_get_driver_data(struct platform_device *pdev)
|
|
{
|
|
if (pdev->dev.of_node) {
|
|
const struct of_device_id *match;
|
|
|
|
match = of_match_node(at91_can_dt_ids, pdev->dev.of_node);
|
|
if (!match) {
|
|
dev_err(&pdev->dev, "no matching node found in dtb\n");
|
|
return NULL;
|
|
}
|
|
return (const struct at91_devtype_data *)match->data;
|
|
}
|
|
return (const struct at91_devtype_data *)
|
|
platform_get_device_id(pdev)->driver_data;
|
|
}
|
|
|
|
static int at91_can_probe(struct platform_device *pdev)
|
|
{
|
|
const struct at91_devtype_data *devtype_data;
|
|
struct net_device *dev;
|
|
struct at91_priv *priv;
|
|
struct resource *res;
|
|
struct clk *clk;
|
|
void __iomem *addr;
|
|
int err, irq;
|
|
|
|
devtype_data = at91_can_get_driver_data(pdev);
|
|
if (!devtype_data) {
|
|
dev_err(&pdev->dev, "no driver data\n");
|
|
err = -ENODEV;
|
|
goto exit;
|
|
}
|
|
|
|
clk = clk_get(&pdev->dev, "can_clk");
|
|
if (IS_ERR(clk)) {
|
|
dev_err(&pdev->dev, "no clock defined\n");
|
|
err = -ENODEV;
|
|
goto exit;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (!res || irq <= 0) {
|
|
err = -ENODEV;
|
|
goto exit_put;
|
|
}
|
|
|
|
if (!request_mem_region(res->start,
|
|
resource_size(res),
|
|
pdev->name)) {
|
|
err = -EBUSY;
|
|
goto exit_put;
|
|
}
|
|
|
|
addr = ioremap_nocache(res->start, resource_size(res));
|
|
if (!addr) {
|
|
err = -ENOMEM;
|
|
goto exit_release;
|
|
}
|
|
|
|
dev = alloc_candev(sizeof(struct at91_priv),
|
|
1 << devtype_data->tx_shift);
|
|
if (!dev) {
|
|
err = -ENOMEM;
|
|
goto exit_iounmap;
|
|
}
|
|
|
|
dev->netdev_ops = &at91_netdev_ops;
|
|
dev->irq = irq;
|
|
dev->flags |= IFF_ECHO;
|
|
|
|
priv = netdev_priv(dev);
|
|
priv->can.clock.freq = clk_get_rate(clk);
|
|
priv->can.bittiming_const = &at91_bittiming_const;
|
|
priv->can.do_set_mode = at91_set_mode;
|
|
priv->can.do_get_berr_counter = at91_get_berr_counter;
|
|
priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES |
|
|
CAN_CTRLMODE_LISTENONLY;
|
|
priv->reg_base = addr;
|
|
priv->devtype_data = *devtype_data;
|
|
priv->clk = clk;
|
|
priv->pdata = dev_get_platdata(&pdev->dev);
|
|
priv->mb0_id = 0x7ff;
|
|
|
|
netif_napi_add(dev, &priv->napi, at91_poll, get_mb_rx_num(priv));
|
|
|
|
if (at91_is_sam9263(priv))
|
|
dev->sysfs_groups[0] = &at91_sysfs_attr_group;
|
|
|
|
platform_set_drvdata(pdev, dev);
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
err = register_candev(dev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "registering netdev failed\n");
|
|
goto exit_free;
|
|
}
|
|
|
|
devm_can_led_init(dev);
|
|
|
|
dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%d)\n",
|
|
priv->reg_base, dev->irq);
|
|
|
|
return 0;
|
|
|
|
exit_free:
|
|
free_candev(dev);
|
|
exit_iounmap:
|
|
iounmap(addr);
|
|
exit_release:
|
|
release_mem_region(res->start, resource_size(res));
|
|
exit_put:
|
|
clk_put(clk);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static int at91_can_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
struct at91_priv *priv = netdev_priv(dev);
|
|
struct resource *res;
|
|
|
|
unregister_netdev(dev);
|
|
|
|
iounmap(priv->reg_base);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
release_mem_region(res->start, resource_size(res));
|
|
|
|
clk_put(priv->clk);
|
|
|
|
free_candev(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct platform_device_id at91_can_id_table[] = {
|
|
{
|
|
.name = "at91sam9x5_can",
|
|
.driver_data = (kernel_ulong_t)&at91_at91sam9x5_data,
|
|
}, {
|
|
.name = "at91_can",
|
|
.driver_data = (kernel_ulong_t)&at91_at91sam9263_data,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, at91_can_id_table);
|
|
|
|
static struct platform_driver at91_can_driver = {
|
|
.probe = at91_can_probe,
|
|
.remove = at91_can_remove,
|
|
.driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.of_match_table = of_match_ptr(at91_can_dt_ids),
|
|
},
|
|
.id_table = at91_can_id_table,
|
|
};
|
|
|
|
module_platform_driver(at91_can_driver);
|
|
|
|
MODULE_AUTHOR("Marc Kleine-Budde <mkl@pengutronix.de>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION(KBUILD_MODNAME " CAN netdevice driver");
|