322 строки
6.6 KiB
ArmAsm
322 строки
6.6 KiB
ArmAsm
/*
|
|
* arch/arm/mach-at91/pm_slow_clock.S
|
|
*
|
|
* Copyright (C) 2006 Savin Zlobec
|
|
*
|
|
* AT91SAM9 support:
|
|
* Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/at91_pmc.h>
|
|
|
|
#if defined(CONFIG_ARCH_AT91RM9200)
|
|
#include <mach/at91rm9200_mc.h>
|
|
#elif defined(CONFIG_ARCH_AT91SAM9G45)
|
|
#include <mach/at91sam9_ddrsdr.h>
|
|
#else
|
|
#include <mach/at91sam9_sdramc.h>
|
|
#endif
|
|
|
|
|
|
#ifdef CONFIG_ARCH_AT91SAM9263
|
|
/*
|
|
* FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
|
|
* handle those cases both here and in the Suspend-To-RAM support.
|
|
*/
|
|
#warning Assuming EB1 SDRAM controller is *NOT* used
|
|
#endif
|
|
|
|
/*
|
|
* When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
|
|
* clock during suspend by adjusting its prescalar and divisor.
|
|
* NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
|
|
* are errata regarding adjusting the prescalar and divisor.
|
|
*/
|
|
#undef SLOWDOWN_MASTER_CLOCK
|
|
|
|
#define MCKRDY_TIMEOUT 1000
|
|
#define MOSCRDY_TIMEOUT 1000
|
|
#define PLLALOCK_TIMEOUT 1000
|
|
#define PLLBLOCK_TIMEOUT 1000
|
|
|
|
|
|
/*
|
|
* Wait until master clock is ready (after switching master clock source)
|
|
*/
|
|
.macro wait_mckrdy
|
|
mov r4, #MCKRDY_TIMEOUT
|
|
1: sub r4, r4, #1
|
|
cmp r4, #0
|
|
beq 2f
|
|
ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
|
|
tst r3, #AT91_PMC_MCKRDY
|
|
beq 1b
|
|
2:
|
|
.endm
|
|
|
|
/*
|
|
* Wait until master oscillator has stabilized.
|
|
*/
|
|
.macro wait_moscrdy
|
|
mov r4, #MOSCRDY_TIMEOUT
|
|
1: sub r4, r4, #1
|
|
cmp r4, #0
|
|
beq 2f
|
|
ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
|
|
tst r3, #AT91_PMC_MOSCS
|
|
beq 1b
|
|
2:
|
|
.endm
|
|
|
|
/*
|
|
* Wait until PLLA has locked.
|
|
*/
|
|
.macro wait_pllalock
|
|
mov r4, #PLLALOCK_TIMEOUT
|
|
1: sub r4, r4, #1
|
|
cmp r4, #0
|
|
beq 2f
|
|
ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
|
|
tst r3, #AT91_PMC_LOCKA
|
|
beq 1b
|
|
2:
|
|
.endm
|
|
|
|
/*
|
|
* Wait until PLLB has locked.
|
|
*/
|
|
.macro wait_pllblock
|
|
mov r4, #PLLBLOCK_TIMEOUT
|
|
1: sub r4, r4, #1
|
|
cmp r4, #0
|
|
beq 2f
|
|
ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
|
|
tst r3, #AT91_PMC_LOCKB
|
|
beq 1b
|
|
2:
|
|
.endm
|
|
|
|
.text
|
|
|
|
ENTRY(at91_slow_clock)
|
|
/* Save registers on stack */
|
|
stmfd sp!, {r0 - r12, lr}
|
|
|
|
/*
|
|
* Register usage:
|
|
* R1 = Base address of AT91_PMC
|
|
* R2 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
|
|
* R3 = temporary register
|
|
* R4 = temporary register
|
|
* R5 = Base address of second RAM Controller or 0 if not present
|
|
*/
|
|
ldr r1, .at91_va_base_pmc
|
|
ldr r2, .at91_va_base_sdramc
|
|
ldr r5, .at91_va_base_ramc1
|
|
|
|
/* Drain write buffer */
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c10, 4
|
|
|
|
#ifdef CONFIG_ARCH_AT91RM9200
|
|
/* Put SDRAM in self-refresh mode */
|
|
mov r3, #1
|
|
str r3, [r2, #AT91_SDRAMC_SRR]
|
|
#elif defined(CONFIG_ARCH_AT91SAM9G45)
|
|
|
|
/* prepare for DDRAM self-refresh mode */
|
|
ldr r3, [r2, #AT91_DDRSDRC_LPR]
|
|
str r3, .saved_sam9_lpr
|
|
bic r3, #AT91_DDRSDRC_LPCB
|
|
orr r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
|
|
|
|
/* figure out if we use the second ram controller */
|
|
cmp r5, #0
|
|
ldrne r4, [r5, #AT91_DDRSDRC_LPR]
|
|
strne r4, .saved_sam9_lpr1
|
|
bicne r4, #AT91_DDRSDRC_LPCB
|
|
orrne r4, #AT91_DDRSDRC_LPCB_SELF_REFRESH
|
|
|
|
/* Enable DDRAM self-refresh mode */
|
|
str r3, [r2, #AT91_DDRSDRC_LPR]
|
|
strne r4, [r5, #AT91_DDRSDRC_LPR]
|
|
#else
|
|
/* Enable SDRAM self-refresh mode */
|
|
ldr r3, [r2, #AT91_SDRAMC_LPR]
|
|
str r3, .saved_sam9_lpr
|
|
|
|
bic r3, #AT91_SDRAMC_LPCB
|
|
orr r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
|
|
str r3, [r2, #AT91_SDRAMC_LPR]
|
|
#endif
|
|
|
|
/* Save Master clock setting */
|
|
ldr r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
|
|
str r3, .saved_mckr
|
|
|
|
/*
|
|
* Set the Master clock source to slow clock
|
|
*/
|
|
bic r3, r3, #AT91_PMC_CSS
|
|
str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
|
|
|
|
wait_mckrdy
|
|
|
|
#ifdef SLOWDOWN_MASTER_CLOCK
|
|
/*
|
|
* Set the Master Clock PRES and MDIV fields.
|
|
*
|
|
* See AT91RM9200 errata #27 and #28 for details.
|
|
*/
|
|
mov r3, #0
|
|
str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
|
|
|
|
wait_mckrdy
|
|
#endif
|
|
|
|
/* Save PLLA setting and disable it */
|
|
ldr r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
|
|
str r3, .saved_pllar
|
|
|
|
mov r3, #AT91_PMC_PLLCOUNT
|
|
orr r3, r3, #(1 << 29) /* bit 29 always set */
|
|
str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
|
|
|
|
/* Save PLLB setting and disable it */
|
|
ldr r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
|
|
str r3, .saved_pllbr
|
|
|
|
mov r3, #AT91_PMC_PLLCOUNT
|
|
str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
|
|
|
|
/* Turn off the main oscillator */
|
|
ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
|
|
bic r3, r3, #AT91_PMC_MOSCEN
|
|
str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
|
|
|
|
/* Wait for interrupt */
|
|
mcr p15, 0, r0, c7, c0, 4
|
|
|
|
/* Turn on the main oscillator */
|
|
ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
|
|
orr r3, r3, #AT91_PMC_MOSCEN
|
|
str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
|
|
|
|
wait_moscrdy
|
|
|
|
/* Restore PLLB setting */
|
|
ldr r3, .saved_pllbr
|
|
str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
|
|
|
|
tst r3, #(AT91_PMC_MUL & 0xff0000)
|
|
bne 1f
|
|
tst r3, #(AT91_PMC_MUL & ~0xff0000)
|
|
beq 2f
|
|
1:
|
|
wait_pllblock
|
|
2:
|
|
|
|
/* Restore PLLA setting */
|
|
ldr r3, .saved_pllar
|
|
str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
|
|
|
|
tst r3, #(AT91_PMC_MUL & 0xff0000)
|
|
bne 3f
|
|
tst r3, #(AT91_PMC_MUL & ~0xff0000)
|
|
beq 4f
|
|
3:
|
|
wait_pllalock
|
|
4:
|
|
|
|
#ifdef SLOWDOWN_MASTER_CLOCK
|
|
/*
|
|
* First set PRES if it was not 0,
|
|
* than set CSS and MDIV fields.
|
|
*
|
|
* See AT91RM9200 errata #27 and #28 for details.
|
|
*/
|
|
ldr r3, .saved_mckr
|
|
tst r3, #AT91_PMC_PRES
|
|
beq 2f
|
|
and r3, r3, #AT91_PMC_PRES
|
|
str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
|
|
|
|
wait_mckrdy
|
|
#endif
|
|
|
|
/*
|
|
* Restore master clock setting
|
|
*/
|
|
2: ldr r3, .saved_mckr
|
|
str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
|
|
|
|
wait_mckrdy
|
|
|
|
#ifdef CONFIG_ARCH_AT91RM9200
|
|
/* Do nothing - self-refresh is automatically disabled. */
|
|
#elif defined(CONFIG_ARCH_AT91SAM9G45)
|
|
/* Restore LPR on AT91 with DDRAM */
|
|
ldr r3, .saved_sam9_lpr
|
|
str r3, [r2, #AT91_DDRSDRC_LPR]
|
|
|
|
/* if we use the second ram controller */
|
|
cmp r5, #0
|
|
ldrne r4, .saved_sam9_lpr1
|
|
strne r4, [r5, #AT91_DDRSDRC_LPR]
|
|
|
|
#else
|
|
/* Restore LPR on AT91 with SDRAM */
|
|
ldr r3, .saved_sam9_lpr
|
|
str r3, [r2, #AT91_SDRAMC_LPR]
|
|
#endif
|
|
|
|
/* Restore registers, and return */
|
|
ldmfd sp!, {r0 - r12, pc}
|
|
|
|
|
|
.saved_mckr:
|
|
.word 0
|
|
|
|
.saved_pllar:
|
|
.word 0
|
|
|
|
.saved_pllbr:
|
|
.word 0
|
|
|
|
.saved_sam9_lpr:
|
|
.word 0
|
|
|
|
.saved_sam9_lpr1:
|
|
.word 0
|
|
|
|
.at91_va_base_pmc:
|
|
.word AT91_VA_BASE_SYS + AT91_PMC
|
|
|
|
#ifdef CONFIG_ARCH_AT91RM9200
|
|
.at91_va_base_sdramc:
|
|
.word AT91_VA_BASE_SYS
|
|
#elif defined(CONFIG_ARCH_AT91SAM9G45)
|
|
.at91_va_base_sdramc:
|
|
.word AT91_VA_BASE_SYS + AT91_DDRSDRC0
|
|
#else
|
|
.at91_va_base_sdramc:
|
|
.word AT91_VA_BASE_SYS + AT91_SDRAMC0
|
|
#endif
|
|
|
|
.at91_va_base_ramc1:
|
|
#if defined(CONFIG_ARCH_AT91SAM9G45)
|
|
.word AT91_VA_BASE_SYS + AT91_DDRSDRC1
|
|
#else
|
|
.word 0
|
|
#endif
|
|
|
|
ENTRY(at91_slow_clock_sz)
|
|
.word .-at91_slow_clock
|