375 строки
10 KiB
C
375 строки
10 KiB
C
/*
|
|
ne3210.c
|
|
|
|
Linux driver for Novell NE3210 EISA Network Adapter
|
|
|
|
Copyright (C) 1998, Paul Gortmaker.
|
|
|
|
This software may be used and distributed according to the terms
|
|
of the GNU General Public License, incorporated herein by reference.
|
|
|
|
Information and Code Sources:
|
|
|
|
1) Based upon my other EISA 8390 drivers (lne390, es3210, smc-ultra32)
|
|
2) The existing myriad of other Linux 8390 drivers by Donald Becker.
|
|
3) Info for getting IRQ and sh-mem gleaned from the EISA cfg file
|
|
|
|
The NE3210 is an EISA shared memory NS8390 implementation. Shared
|
|
memory address > 1MB should work with this driver.
|
|
|
|
Note that the .cfg file (3/11/93, v1.0) has AUI and BNC switched
|
|
around (or perhaps there are some defective/backwards cards ???)
|
|
|
|
This driver WILL NOT WORK FOR THE NE3200 - it is completely different
|
|
and does not use an 8390 at all.
|
|
|
|
Updated to EISA probing API 5/2003 by Marc Zyngier.
|
|
*/
|
|
|
|
static const char *version =
|
|
"ne3210.c: Driver revision v0.03, 30/09/98\n";
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/eisa.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/string.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
|
|
#include "8390.h"
|
|
|
|
#define DRV_NAME "ne3210"
|
|
|
|
static int ne3210_open(struct net_device *dev);
|
|
static int ne3210_close(struct net_device *dev);
|
|
|
|
static void ne3210_reset_8390(struct net_device *dev);
|
|
|
|
static void ne3210_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page);
|
|
static void ne3210_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset);
|
|
static void ne3210_block_output(struct net_device *dev, int count, const unsigned char *buf, const int start_page);
|
|
|
|
#define NE3210_START_PG 0x00 /* First page of TX buffer */
|
|
#define NE3210_STOP_PG 0x80 /* Last page +1 of RX ring */
|
|
|
|
#define NE3210_IO_EXTENT 0x20
|
|
#define NE3210_SA_PROM 0x16 /* Start of e'net addr. */
|
|
#define NE3210_RESET_PORT 0xc84
|
|
#define NE3210_NIC_OFFSET 0x00 /* Hello, the 8390 is *here* */
|
|
|
|
#define NE3210_ADDR0 0x00 /* 3 byte vendor prefix */
|
|
#define NE3210_ADDR1 0x00
|
|
#define NE3210_ADDR2 0x1b
|
|
|
|
#define NE3210_CFG1 0xc84 /* NB: 0xc84 is also "reset" port. */
|
|
#define NE3210_CFG2 0xc90
|
|
#define NE3210_CFG_EXTENT (NE3210_CFG2 - NE3210_CFG1 + 1)
|
|
|
|
/*
|
|
* You can OR any of the following bits together and assign it
|
|
* to NE3210_DEBUG to get verbose driver info during operation.
|
|
* Currently only the probe one is implemented.
|
|
*/
|
|
|
|
#define NE3210_D_PROBE 0x01
|
|
#define NE3210_D_RX_PKT 0x02
|
|
#define NE3210_D_TX_PKT 0x04
|
|
#define NE3210_D_IRQ 0x08
|
|
|
|
#define NE3210_DEBUG 0x0
|
|
|
|
static unsigned char irq_map[] __initdata = {15, 12, 11, 10, 9, 7, 5, 3};
|
|
static unsigned int shmem_map[] __initdata = {0xff0, 0xfe0, 0xfff0, 0xd8, 0xffe0, 0xffc0, 0xd0, 0x0};
|
|
static const char *ifmap[] __initdata = {"UTP", "?", "BNC", "AUI"};
|
|
static int ifmap_val[] __initdata = {
|
|
IF_PORT_10BASET,
|
|
IF_PORT_UNKNOWN,
|
|
IF_PORT_10BASE2,
|
|
IF_PORT_AUI,
|
|
};
|
|
|
|
static int __init ne3210_eisa_probe (struct device *device)
|
|
{
|
|
unsigned long ioaddr, phys_mem;
|
|
int i, retval, port_index;
|
|
struct eisa_device *edev = to_eisa_device (device);
|
|
struct net_device *dev;
|
|
|
|
/* Allocate dev->priv and fill in 8390 specific dev fields. */
|
|
if (!(dev = alloc_ei_netdev ())) {
|
|
printk ("ne3210.c: unable to allocate memory for dev!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
SET_MODULE_OWNER(dev);
|
|
SET_NETDEV_DEV(dev, device);
|
|
device->driver_data = dev;
|
|
ioaddr = edev->base_addr;
|
|
|
|
if (!request_region(ioaddr, NE3210_IO_EXTENT, DRV_NAME)) {
|
|
retval = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
if (!request_region(ioaddr + NE3210_CFG1,
|
|
NE3210_CFG_EXTENT, DRV_NAME)) {
|
|
retval = -EBUSY;
|
|
goto out1;
|
|
}
|
|
|
|
#if NE3210_DEBUG & NE3210_D_PROBE
|
|
printk("ne3210-debug: probe at %#x, ID %s\n", ioaddr, edev->id.sig);
|
|
printk("ne3210-debug: config regs: %#x %#x\n",
|
|
inb(ioaddr + NE3210_CFG1), inb(ioaddr + NE3210_CFG2));
|
|
#endif
|
|
|
|
|
|
port_index = inb(ioaddr + NE3210_CFG2) >> 6;
|
|
printk("ne3210.c: NE3210 in EISA slot %d, media: %s, addr:",
|
|
edev->slot, ifmap[port_index]);
|
|
for(i = 0; i < ETHER_ADDR_LEN; i++)
|
|
printk(" %02x", (dev->dev_addr[i] = inb(ioaddr + NE3210_SA_PROM + i)));
|
|
|
|
|
|
/* Snarf the interrupt now. CFG file has them all listed as `edge' with share=NO */
|
|
dev->irq = irq_map[(inb(ioaddr + NE3210_CFG2) >> 3) & 0x07];
|
|
printk(".\nne3210.c: using IRQ %d, ", dev->irq);
|
|
|
|
retval = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev);
|
|
if (retval) {
|
|
printk (" unable to get IRQ %d.\n", dev->irq);
|
|
goto out2;
|
|
}
|
|
|
|
phys_mem = shmem_map[inb(ioaddr + NE3210_CFG2) & 0x07] * 0x1000;
|
|
|
|
/*
|
|
BEWARE!! Some dain-bramaged EISA SCUs will allow you to put
|
|
the card mem within the region covered by `normal' RAM !!!
|
|
*/
|
|
if (phys_mem > 1024*1024) { /* phys addr > 1MB */
|
|
if (phys_mem < virt_to_phys(high_memory)) {
|
|
printk(KERN_CRIT "ne3210.c: Card RAM overlaps with normal memory!!!\n");
|
|
printk(KERN_CRIT "ne3210.c: Use EISA SCU to set card memory below 1MB,\n");
|
|
printk(KERN_CRIT "ne3210.c: or to an address above 0x%lx.\n", virt_to_phys(high_memory));
|
|
printk(KERN_CRIT "ne3210.c: Driver NOT installed.\n");
|
|
retval = -EINVAL;
|
|
goto out3;
|
|
}
|
|
}
|
|
|
|
if (!request_mem_region (phys_mem, NE3210_STOP_PG*0x100, DRV_NAME)) {
|
|
printk ("ne3210.c: Unable to request shared memory at physical address %#lx\n",
|
|
phys_mem);
|
|
goto out3;
|
|
}
|
|
|
|
printk("%dkB memory at physical address %#lx\n",
|
|
NE3210_STOP_PG/4, phys_mem);
|
|
|
|
ei_status.mem = ioremap(phys_mem, NE3210_STOP_PG*0x100);
|
|
if (!ei_status.mem) {
|
|
printk(KERN_ERR "ne3210.c: Unable to remap card memory !!\n");
|
|
printk(KERN_ERR "ne3210.c: Driver NOT installed.\n");
|
|
retval = -EAGAIN;
|
|
goto out4;
|
|
}
|
|
printk("ne3210.c: remapped %dkB card memory to virtual address %p\n",
|
|
NE3210_STOP_PG/4, ei_status.mem);
|
|
dev->mem_start = (unsigned long)ei_status.mem;
|
|
dev->mem_end = dev->mem_start + (NE3210_STOP_PG - NE3210_START_PG)*256;
|
|
|
|
/* The 8390 offset is zero for the NE3210 */
|
|
dev->base_addr = ioaddr;
|
|
|
|
ei_status.name = "NE3210";
|
|
ei_status.tx_start_page = NE3210_START_PG;
|
|
ei_status.rx_start_page = NE3210_START_PG + TX_PAGES;
|
|
ei_status.stop_page = NE3210_STOP_PG;
|
|
ei_status.word16 = 1;
|
|
ei_status.priv = phys_mem;
|
|
|
|
if (ei_debug > 0)
|
|
printk(version);
|
|
|
|
ei_status.reset_8390 = &ne3210_reset_8390;
|
|
ei_status.block_input = &ne3210_block_input;
|
|
ei_status.block_output = &ne3210_block_output;
|
|
ei_status.get_8390_hdr = &ne3210_get_8390_hdr;
|
|
|
|
dev->open = &ne3210_open;
|
|
dev->stop = &ne3210_close;
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
dev->poll_controller = ei_poll;
|
|
#endif
|
|
dev->if_port = ifmap_val[port_index];
|
|
|
|
if ((retval = register_netdev (dev)))
|
|
goto out5;
|
|
|
|
NS8390_init(dev, 0);
|
|
return 0;
|
|
|
|
out5:
|
|
iounmap(ei_status.mem);
|
|
out4:
|
|
release_mem_region (phys_mem, NE3210_STOP_PG*0x100);
|
|
out3:
|
|
free_irq (dev->irq, dev);
|
|
out2:
|
|
release_region (ioaddr + NE3210_CFG1, NE3210_CFG_EXTENT);
|
|
out1:
|
|
release_region (ioaddr, NE3210_IO_EXTENT);
|
|
out:
|
|
free_netdev (dev);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int __devexit ne3210_eisa_remove (struct device *device)
|
|
{
|
|
struct net_device *dev = device->driver_data;
|
|
unsigned long ioaddr = to_eisa_device (device)->base_addr;
|
|
|
|
unregister_netdev (dev);
|
|
iounmap(ei_status.mem);
|
|
release_mem_region (ei_status.priv, NE3210_STOP_PG*0x100);
|
|
free_irq (dev->irq, dev);
|
|
release_region (ioaddr + NE3210_CFG1, NE3210_CFG_EXTENT);
|
|
release_region (ioaddr, NE3210_IO_EXTENT);
|
|
free_netdev (dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Reset by toggling the "Board Enable" bits (bit 2 and 0).
|
|
*/
|
|
|
|
static void ne3210_reset_8390(struct net_device *dev)
|
|
{
|
|
unsigned short ioaddr = dev->base_addr;
|
|
|
|
outb(0x04, ioaddr + NE3210_RESET_PORT);
|
|
if (ei_debug > 1) printk("%s: resetting the NE3210...", dev->name);
|
|
|
|
mdelay(2);
|
|
|
|
ei_status.txing = 0;
|
|
outb(0x01, ioaddr + NE3210_RESET_PORT);
|
|
if (ei_debug > 1) printk("reset done\n");
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Note: In the following three functions is the implicit assumption
|
|
* that the associated memcpy will only use "rep; movsl" as long as
|
|
* we keep the counts as some multiple of doublewords. This is a
|
|
* requirement of the hardware, and also prevents us from using
|
|
* eth_io_copy_and_sum() since we can't guarantee it will limit
|
|
* itself to doubleword access.
|
|
*/
|
|
|
|
/*
|
|
* Grab the 8390 specific header. Similar to the block_input routine, but
|
|
* we don't need to be concerned with ring wrap as the header will be at
|
|
* the start of a page, so we optimize accordingly. (A single doubleword.)
|
|
*/
|
|
|
|
static void
|
|
ne3210_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
|
|
{
|
|
void __iomem *hdr_start = ei_status.mem + ((ring_page - NE3210_START_PG)<<8);
|
|
memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr));
|
|
hdr->count = (hdr->count + 3) & ~3; /* Round up allocation. */
|
|
}
|
|
|
|
/*
|
|
* Block input and output are easy on shared memory ethercards, the only
|
|
* complication is when the ring buffer wraps. The count will already
|
|
* be rounded up to a doubleword value via ne3210_get_8390_hdr() above.
|
|
*/
|
|
|
|
static void ne3210_block_input(struct net_device *dev, int count, struct sk_buff *skb,
|
|
int ring_offset)
|
|
{
|
|
void __iomem *start = ei_status.mem + ring_offset - NE3210_START_PG*256;
|
|
|
|
if (ring_offset + count > NE3210_STOP_PG*256) {
|
|
/* Packet wraps over end of ring buffer. */
|
|
int semi_count = NE3210_STOP_PG*256 - ring_offset;
|
|
memcpy_fromio(skb->data, start, semi_count);
|
|
count -= semi_count;
|
|
memcpy_fromio(skb->data + semi_count,
|
|
ei_status.mem + TX_PAGES*256, count);
|
|
} else {
|
|
/* Packet is in one chunk. */
|
|
memcpy_fromio(skb->data, start, count);
|
|
}
|
|
}
|
|
|
|
static void ne3210_block_output(struct net_device *dev, int count,
|
|
const unsigned char *buf, int start_page)
|
|
{
|
|
void __iomem *shmem = ei_status.mem + ((start_page - NE3210_START_PG)<<8);
|
|
|
|
count = (count + 3) & ~3; /* Round up to doubleword */
|
|
memcpy_toio(shmem, buf, count);
|
|
}
|
|
|
|
static int ne3210_open(struct net_device *dev)
|
|
{
|
|
ei_open(dev);
|
|
return 0;
|
|
}
|
|
|
|
static int ne3210_close(struct net_device *dev)
|
|
{
|
|
|
|
if (ei_debug > 1)
|
|
printk("%s: Shutting down ethercard.\n", dev->name);
|
|
|
|
ei_close(dev);
|
|
return 0;
|
|
}
|
|
|
|
static struct eisa_device_id ne3210_ids[] = {
|
|
{ "EGL0101" },
|
|
{ "NVL1801" },
|
|
{ "" },
|
|
};
|
|
|
|
static struct eisa_driver ne3210_eisa_driver = {
|
|
.id_table = ne3210_ids,
|
|
.driver = {
|
|
.name = "ne3210",
|
|
.probe = ne3210_eisa_probe,
|
|
.remove = __devexit_p (ne3210_eisa_remove),
|
|
},
|
|
};
|
|
|
|
MODULE_DESCRIPTION("NE3210 EISA Ethernet driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(eisa, ne3210_ids);
|
|
|
|
int ne3210_init(void)
|
|
{
|
|
return eisa_driver_register (&ne3210_eisa_driver);
|
|
}
|
|
|
|
void ne3210_cleanup(void)
|
|
{
|
|
eisa_driver_unregister (&ne3210_eisa_driver);
|
|
}
|
|
|
|
module_init (ne3210_init);
|
|
module_exit (ne3210_cleanup);
|