309 строки
9.0 KiB
C
309 строки
9.0 KiB
C
/*
|
|
* OMAP Smartreflex Defines and Routines
|
|
*
|
|
* Author: Thara Gopinath <thara@ti.com>
|
|
*
|
|
* Copyright (C) 2010 Texas Instruments, Inc.
|
|
* Thara Gopinath <thara@ti.com>
|
|
*
|
|
* Copyright (C) 2008 Nokia Corporation
|
|
* Kalle Jokiniemi
|
|
*
|
|
* Copyright (C) 2007 Texas Instruments, Inc.
|
|
* Lesly A M <x0080970@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#ifndef __POWER_SMARTREFLEX_H
|
|
#define __POWER_SMARTREFLEX_H
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <plat/voltage.h>
|
|
|
|
/*
|
|
* Different Smartreflex IPs version. The v1 is the 65nm version used in
|
|
* OMAP3430. The v2 is the update for the 45nm version of the IP
|
|
* used in OMAP3630 and OMAP4430
|
|
*/
|
|
#define SR_TYPE_V1 1
|
|
#define SR_TYPE_V2 2
|
|
|
|
/* SMART REFLEX REG ADDRESS OFFSET */
|
|
#define SRCONFIG 0x00
|
|
#define SRSTATUS 0x04
|
|
#define SENVAL 0x08
|
|
#define SENMIN 0x0C
|
|
#define SENMAX 0x10
|
|
#define SENAVG 0x14
|
|
#define AVGWEIGHT 0x18
|
|
#define NVALUERECIPROCAL 0x1c
|
|
#define SENERROR_V1 0x20
|
|
#define ERRCONFIG_V1 0x24
|
|
#define IRQ_EOI 0x20
|
|
#define IRQSTATUS_RAW 0x24
|
|
#define IRQSTATUS 0x28
|
|
#define IRQENABLE_SET 0x2C
|
|
#define IRQENABLE_CLR 0x30
|
|
#define SENERROR_V2 0x34
|
|
#define ERRCONFIG_V2 0x38
|
|
|
|
/* Bit/Shift Positions */
|
|
|
|
/* SRCONFIG */
|
|
#define SRCONFIG_ACCUMDATA_SHIFT 22
|
|
#define SRCONFIG_SRCLKLENGTH_SHIFT 12
|
|
#define SRCONFIG_SENNENABLE_V1_SHIFT 5
|
|
#define SRCONFIG_SENPENABLE_V1_SHIFT 3
|
|
#define SRCONFIG_SENNENABLE_V2_SHIFT 1
|
|
#define SRCONFIG_SENPENABLE_V2_SHIFT 0
|
|
#define SRCONFIG_CLKCTRL_SHIFT 0
|
|
|
|
#define SRCONFIG_ACCUMDATA_MASK (0x3ff << 22)
|
|
|
|
#define SRCONFIG_SRENABLE BIT(11)
|
|
#define SRCONFIG_SENENABLE BIT(10)
|
|
#define SRCONFIG_ERRGEN_EN BIT(9)
|
|
#define SRCONFIG_MINMAXAVG_EN BIT(8)
|
|
#define SRCONFIG_DELAYCTRL BIT(2)
|
|
|
|
/* AVGWEIGHT */
|
|
#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT 2
|
|
#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT 0
|
|
|
|
/* NVALUERECIPROCAL */
|
|
#define NVALUERECIPROCAL_SENPGAIN_SHIFT 20
|
|
#define NVALUERECIPROCAL_SENNGAIN_SHIFT 16
|
|
#define NVALUERECIPROCAL_RNSENP_SHIFT 8
|
|
#define NVALUERECIPROCAL_RNSENN_SHIFT 0
|
|
|
|
/* ERRCONFIG */
|
|
#define ERRCONFIG_ERRWEIGHT_SHIFT 16
|
|
#define ERRCONFIG_ERRMAXLIMIT_SHIFT 8
|
|
#define ERRCONFIG_ERRMINLIMIT_SHIFT 0
|
|
|
|
#define SR_ERRWEIGHT_MASK (0x07 << 16)
|
|
#define SR_ERRMAXLIMIT_MASK (0xff << 8)
|
|
#define SR_ERRMINLIMIT_MASK (0xff << 0)
|
|
|
|
#define ERRCONFIG_VPBOUNDINTEN_V1 BIT(31)
|
|
#define ERRCONFIG_VPBOUNDINTST_V1 BIT(30)
|
|
#define ERRCONFIG_MCUACCUMINTEN BIT(29)
|
|
#define ERRCONFIG_MCUACCUMINTST BIT(28)
|
|
#define ERRCONFIG_MCUVALIDINTEN BIT(27)
|
|
#define ERRCONFIG_MCUVALIDINTST BIT(26)
|
|
#define ERRCONFIG_MCUBOUNDINTEN BIT(25)
|
|
#define ERRCONFIG_MCUBOUNDINTST BIT(24)
|
|
#define ERRCONFIG_MCUDISACKINTEN BIT(23)
|
|
#define ERRCONFIG_VPBOUNDINTST_V2 BIT(23)
|
|
#define ERRCONFIG_MCUDISACKINTST BIT(22)
|
|
#define ERRCONFIG_VPBOUNDINTEN_V2 BIT(22)
|
|
|
|
#define ERRCONFIG_STATUS_V1_MASK (ERRCONFIG_VPBOUNDINTST_V1 | \
|
|
ERRCONFIG_MCUACCUMINTST | \
|
|
ERRCONFIG_MCUVALIDINTST | \
|
|
ERRCONFIG_MCUBOUNDINTST | \
|
|
ERRCONFIG_MCUDISACKINTST)
|
|
/* IRQSTATUS */
|
|
#define IRQSTATUS_MCUACCUMINT BIT(3)
|
|
#define IRQSTATUS_MCVALIDINT BIT(2)
|
|
#define IRQSTATUS_MCBOUNDSINT BIT(1)
|
|
#define IRQSTATUS_MCUDISABLEACKINT BIT(0)
|
|
|
|
/* IRQENABLE_SET and IRQENABLE_CLEAR */
|
|
#define IRQENABLE_MCUACCUMINT BIT(3)
|
|
#define IRQENABLE_MCUVALIDINT BIT(2)
|
|
#define IRQENABLE_MCUBOUNDSINT BIT(1)
|
|
#define IRQENABLE_MCUDISABLEACKINT BIT(0)
|
|
|
|
/* Common Bit values */
|
|
|
|
#define SRCLKLENGTH_12MHZ_SYSCLK 0x3c
|
|
#define SRCLKLENGTH_13MHZ_SYSCLK 0x41
|
|
#define SRCLKLENGTH_19MHZ_SYSCLK 0x60
|
|
#define SRCLKLENGTH_26MHZ_SYSCLK 0x82
|
|
#define SRCLKLENGTH_38MHZ_SYSCLK 0xC0
|
|
|
|
/*
|
|
* 3430 specific values. Maybe these should be passed from board file or
|
|
* pmic structures.
|
|
*/
|
|
#define OMAP3430_SR_ACCUMDATA 0x1f4
|
|
|
|
#define OMAP3430_SR1_SENPAVGWEIGHT 0x03
|
|
#define OMAP3430_SR1_SENNAVGWEIGHT 0x03
|
|
|
|
#define OMAP3430_SR2_SENPAVGWEIGHT 0x01
|
|
#define OMAP3430_SR2_SENNAVGWEIGHT 0x01
|
|
|
|
#define OMAP3430_SR_ERRWEIGHT 0x04
|
|
#define OMAP3430_SR_ERRMAXLIMIT 0x02
|
|
|
|
struct omap_sr {
|
|
char *name;
|
|
struct list_head node;
|
|
struct platform_device *pdev;
|
|
struct omap_sr_nvalue_table *nvalue_table;
|
|
struct voltagedomain *voltdm;
|
|
struct dentry *dbg_dir;
|
|
unsigned int irq;
|
|
int srid;
|
|
int ip_type;
|
|
int nvalue_count;
|
|
bool autocomp_active;
|
|
u32 clk_length;
|
|
u32 err_weight;
|
|
u32 err_minlimit;
|
|
u32 err_maxlimit;
|
|
u32 accum_data;
|
|
u32 senn_avgweight;
|
|
u32 senp_avgweight;
|
|
u32 senp_mod;
|
|
u32 senn_mod;
|
|
void __iomem *base;
|
|
};
|
|
|
|
/**
|
|
* test_cond_timeout - busy-loop, testing a condition
|
|
* @cond: condition to test until it evaluates to true
|
|
* @timeout: maximum number of microseconds in the timeout
|
|
* @index: loop index (integer)
|
|
*
|
|
* Loop waiting for @cond to become true or until at least @timeout
|
|
* microseconds have passed. To use, define some integer @index in the
|
|
* calling code. After running, if @index == @timeout, then the loop has
|
|
* timed out.
|
|
*
|
|
* Copied from omap_test_timeout */
|
|
#define sr_test_cond_timeout(cond, timeout, index) \
|
|
({ \
|
|
for (index = 0; index < timeout; index++) { \
|
|
if (cond) \
|
|
break; \
|
|
udelay(1); \
|
|
} \
|
|
})
|
|
|
|
/**
|
|
* struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass
|
|
* pmic specific info to smartreflex driver
|
|
*
|
|
* @sr_pmic_init: API to initialize smartreflex on the PMIC side.
|
|
*/
|
|
struct omap_sr_pmic_data {
|
|
void (*sr_pmic_init) (void);
|
|
};
|
|
|
|
/**
|
|
* struct omap_smartreflex_dev_attr - Smartreflex Device attribute.
|
|
*
|
|
* @sensor_voltdm_name: Name of voltdomain of SR instance
|
|
*/
|
|
struct omap_smartreflex_dev_attr {
|
|
const char *sensor_voltdm_name;
|
|
};
|
|
|
|
#ifdef CONFIG_POWER_AVS_OMAP
|
|
/*
|
|
* The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
|
|
* The smartreflex class driver should pass the class type.
|
|
* Should be used to populate the class_type field of the
|
|
* omap_smartreflex_class_data structure.
|
|
*/
|
|
#define SR_CLASS1 0x1
|
|
#define SR_CLASS2 0x2
|
|
#define SR_CLASS3 0x3
|
|
|
|
/**
|
|
* struct omap_sr_class_data - Smartreflex class driver info
|
|
*
|
|
* @enable: API to enable a particular class smaartreflex.
|
|
* @disable: API to disable a particular class smartreflex.
|
|
* @configure: API to configure a particular class smartreflex.
|
|
* @notify: API to notify the class driver about an event in SR.
|
|
* Not needed for class3.
|
|
* @notify_flags: specify the events to be notified to the class driver
|
|
* @class_type: specify which smartreflex class.
|
|
* Can be used by the SR driver to take any class
|
|
* based decisions.
|
|
*/
|
|
struct omap_sr_class_data {
|
|
int (*enable)(struct omap_sr *sr);
|
|
int (*disable)(struct omap_sr *sr, int is_volt_reset);
|
|
int (*configure)(struct omap_sr *sr);
|
|
int (*notify)(struct omap_sr *sr, u32 status);
|
|
u8 notify_flags;
|
|
u8 class_type;
|
|
};
|
|
|
|
/**
|
|
* struct omap_sr_nvalue_table - Smartreflex n-target value info
|
|
*
|
|
* @efuse_offs: The offset of the efuse where n-target values are stored.
|
|
* @nvalue: The n-target value.
|
|
* @errminlimit: The value of the ERRMINLIMIT bitfield for this n-target
|
|
* @volt_nominal: microvolts DC that the VDD is initially programmed to
|
|
*/
|
|
struct omap_sr_nvalue_table {
|
|
u32 efuse_offs;
|
|
u32 nvalue;
|
|
u32 errminlimit;
|
|
unsigned long volt_nominal;
|
|
};
|
|
|
|
/**
|
|
* struct omap_sr_data - Smartreflex platform data.
|
|
*
|
|
* @name: instance name
|
|
* @ip_type: Smartreflex IP type.
|
|
* @senp_mod: SENPENABLE value for the sr
|
|
* @senn_mod: SENNENABLE value for sr
|
|
* @nvalue_count: Number of distinct nvalues in the nvalue table
|
|
* @enable_on_init: whether this sr module needs to enabled at
|
|
* boot up or not.
|
|
* @nvalue_table: table containing the efuse offsets and nvalues
|
|
* corresponding to them.
|
|
* @voltdm: Pointer to the voltage domain associated with the SR
|
|
*/
|
|
struct omap_sr_data {
|
|
const char *name;
|
|
int ip_type;
|
|
u32 senp_mod;
|
|
u32 senn_mod;
|
|
int nvalue_count;
|
|
bool enable_on_init;
|
|
struct omap_sr_nvalue_table *nvalue_table;
|
|
struct voltagedomain *voltdm;
|
|
};
|
|
|
|
/* Smartreflex module enable/disable interface */
|
|
void omap_sr_enable(struct voltagedomain *voltdm);
|
|
void omap_sr_disable(struct voltagedomain *voltdm);
|
|
void omap_sr_disable_reset_volt(struct voltagedomain *voltdm);
|
|
|
|
/* API to register the pmic specific data with the smartreflex driver. */
|
|
void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data);
|
|
|
|
/* Smartreflex driver hooks to be called from Smartreflex class driver */
|
|
int sr_enable(struct voltagedomain *voltdm, unsigned long volt);
|
|
void sr_disable(struct voltagedomain *voltdm);
|
|
int sr_configure_errgen(struct voltagedomain *voltdm);
|
|
int sr_disable_errgen(struct voltagedomain *voltdm);
|
|
int sr_configure_minmax(struct voltagedomain *voltdm);
|
|
|
|
/* API to register the smartreflex class driver with the smartreflex driver */
|
|
int sr_register_class(struct omap_sr_class_data *class_data);
|
|
#else
|
|
static inline void omap_sr_enable(struct voltagedomain *voltdm) {}
|
|
static inline void omap_sr_disable(struct voltagedomain *voltdm) {}
|
|
static inline void omap_sr_disable_reset_volt(
|
|
struct voltagedomain *voltdm) {}
|
|
static inline void omap_sr_register_pmic(
|
|
struct omap_sr_pmic_data *pmic_data) {}
|
|
#endif
|
|
#endif
|