1323 строки
33 KiB
C
1323 строки
33 KiB
C
/*
|
|
* Xilinx XADC driver
|
|
*
|
|
* Copyright 2013-2014 Analog Devices Inc.
|
|
* Author: Lars-Peter Clauen <lars@metafoo.de>
|
|
*
|
|
* Licensed under the GPL-2.
|
|
*
|
|
* Documentation for the parts can be found at:
|
|
* - XADC hardmacro: Xilinx UG480
|
|
* - ZYNQ XADC interface: Xilinx UG585
|
|
* - AXI XADC interface: Xilinx PG019
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sysfs.h>
|
|
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/events.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
|
|
#include "xilinx-xadc.h"
|
|
|
|
static const unsigned int XADC_ZYNQ_UNMASK_TIMEOUT = 500;
|
|
|
|
/* ZYNQ register definitions */
|
|
#define XADC_ZYNQ_REG_CFG 0x00
|
|
#define XADC_ZYNQ_REG_INTSTS 0x04
|
|
#define XADC_ZYNQ_REG_INTMSK 0x08
|
|
#define XADC_ZYNQ_REG_STATUS 0x0c
|
|
#define XADC_ZYNQ_REG_CFIFO 0x10
|
|
#define XADC_ZYNQ_REG_DFIFO 0x14
|
|
#define XADC_ZYNQ_REG_CTL 0x18
|
|
|
|
#define XADC_ZYNQ_CFG_ENABLE BIT(31)
|
|
#define XADC_ZYNQ_CFG_CFIFOTH_MASK (0xf << 20)
|
|
#define XADC_ZYNQ_CFG_CFIFOTH_OFFSET 20
|
|
#define XADC_ZYNQ_CFG_DFIFOTH_MASK (0xf << 16)
|
|
#define XADC_ZYNQ_CFG_DFIFOTH_OFFSET 16
|
|
#define XADC_ZYNQ_CFG_WEDGE BIT(13)
|
|
#define XADC_ZYNQ_CFG_REDGE BIT(12)
|
|
#define XADC_ZYNQ_CFG_TCKRATE_MASK (0x3 << 8)
|
|
#define XADC_ZYNQ_CFG_TCKRATE_DIV2 (0x0 << 8)
|
|
#define XADC_ZYNQ_CFG_TCKRATE_DIV4 (0x1 << 8)
|
|
#define XADC_ZYNQ_CFG_TCKRATE_DIV8 (0x2 << 8)
|
|
#define XADC_ZYNQ_CFG_TCKRATE_DIV16 (0x3 << 8)
|
|
#define XADC_ZYNQ_CFG_IGAP_MASK 0x1f
|
|
#define XADC_ZYNQ_CFG_IGAP(x) (x)
|
|
|
|
#define XADC_ZYNQ_INT_CFIFO_LTH BIT(9)
|
|
#define XADC_ZYNQ_INT_DFIFO_GTH BIT(8)
|
|
#define XADC_ZYNQ_INT_ALARM_MASK 0xff
|
|
#define XADC_ZYNQ_INT_ALARM_OFFSET 0
|
|
|
|
#define XADC_ZYNQ_STATUS_CFIFO_LVL_MASK (0xf << 16)
|
|
#define XADC_ZYNQ_STATUS_CFIFO_LVL_OFFSET 16
|
|
#define XADC_ZYNQ_STATUS_DFIFO_LVL_MASK (0xf << 12)
|
|
#define XADC_ZYNQ_STATUS_DFIFO_LVL_OFFSET 12
|
|
#define XADC_ZYNQ_STATUS_CFIFOF BIT(11)
|
|
#define XADC_ZYNQ_STATUS_CFIFOE BIT(10)
|
|
#define XADC_ZYNQ_STATUS_DFIFOF BIT(9)
|
|
#define XADC_ZYNQ_STATUS_DFIFOE BIT(8)
|
|
#define XADC_ZYNQ_STATUS_OT BIT(7)
|
|
#define XADC_ZYNQ_STATUS_ALM(x) BIT(x)
|
|
|
|
#define XADC_ZYNQ_CTL_RESET BIT(4)
|
|
|
|
#define XADC_ZYNQ_CMD_NOP 0x00
|
|
#define XADC_ZYNQ_CMD_READ 0x01
|
|
#define XADC_ZYNQ_CMD_WRITE 0x02
|
|
|
|
#define XADC_ZYNQ_CMD(cmd, addr, data) (((cmd) << 26) | ((addr) << 16) | (data))
|
|
|
|
/* AXI register definitions */
|
|
#define XADC_AXI_REG_RESET 0x00
|
|
#define XADC_AXI_REG_STATUS 0x04
|
|
#define XADC_AXI_REG_ALARM_STATUS 0x08
|
|
#define XADC_AXI_REG_CONVST 0x0c
|
|
#define XADC_AXI_REG_XADC_RESET 0x10
|
|
#define XADC_AXI_REG_GIER 0x5c
|
|
#define XADC_AXI_REG_IPISR 0x60
|
|
#define XADC_AXI_REG_IPIER 0x68
|
|
#define XADC_AXI_ADC_REG_OFFSET 0x200
|
|
|
|
#define XADC_AXI_RESET_MAGIC 0xa
|
|
#define XADC_AXI_GIER_ENABLE BIT(31)
|
|
|
|
#define XADC_AXI_INT_EOS BIT(4)
|
|
#define XADC_AXI_INT_ALARM_MASK 0x3c0f
|
|
|
|
#define XADC_FLAGS_BUFFERED BIT(0)
|
|
|
|
static void xadc_write_reg(struct xadc *xadc, unsigned int reg,
|
|
uint32_t val)
|
|
{
|
|
writel(val, xadc->base + reg);
|
|
}
|
|
|
|
static void xadc_read_reg(struct xadc *xadc, unsigned int reg,
|
|
uint32_t *val)
|
|
{
|
|
*val = readl(xadc->base + reg);
|
|
}
|
|
|
|
/*
|
|
* The ZYNQ interface uses two asynchronous FIFOs for communication with the
|
|
* XADC. Reads and writes to the XADC register are performed by submitting a
|
|
* request to the command FIFO (CFIFO), once the request has been completed the
|
|
* result can be read from the data FIFO (DFIFO). The method currently used in
|
|
* this driver is to submit the request for a read/write operation, then go to
|
|
* sleep and wait for an interrupt that signals that a response is available in
|
|
* the data FIFO.
|
|
*/
|
|
|
|
static void xadc_zynq_write_fifo(struct xadc *xadc, uint32_t *cmd,
|
|
unsigned int n)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < n; i++)
|
|
xadc_write_reg(xadc, XADC_ZYNQ_REG_CFIFO, cmd[i]);
|
|
}
|
|
|
|
static void xadc_zynq_drain_fifo(struct xadc *xadc)
|
|
{
|
|
uint32_t status, tmp;
|
|
|
|
xadc_read_reg(xadc, XADC_ZYNQ_REG_STATUS, &status);
|
|
|
|
while (!(status & XADC_ZYNQ_STATUS_DFIFOE)) {
|
|
xadc_read_reg(xadc, XADC_ZYNQ_REG_DFIFO, &tmp);
|
|
xadc_read_reg(xadc, XADC_ZYNQ_REG_STATUS, &status);
|
|
}
|
|
}
|
|
|
|
static void xadc_zynq_update_intmsk(struct xadc *xadc, unsigned int mask,
|
|
unsigned int val)
|
|
{
|
|
xadc->zynq_intmask &= ~mask;
|
|
xadc->zynq_intmask |= val;
|
|
|
|
xadc_write_reg(xadc, XADC_ZYNQ_REG_INTMSK,
|
|
xadc->zynq_intmask | xadc->zynq_masked_alarm);
|
|
}
|
|
|
|
static int xadc_zynq_write_adc_reg(struct xadc *xadc, unsigned int reg,
|
|
uint16_t val)
|
|
{
|
|
uint32_t cmd[1];
|
|
uint32_t tmp;
|
|
int ret;
|
|
|
|
spin_lock_irq(&xadc->lock);
|
|
xadc_zynq_update_intmsk(xadc, XADC_ZYNQ_INT_DFIFO_GTH,
|
|
XADC_ZYNQ_INT_DFIFO_GTH);
|
|
|
|
reinit_completion(&xadc->completion);
|
|
|
|
cmd[0] = XADC_ZYNQ_CMD(XADC_ZYNQ_CMD_WRITE, reg, val);
|
|
xadc_zynq_write_fifo(xadc, cmd, ARRAY_SIZE(cmd));
|
|
xadc_read_reg(xadc, XADC_ZYNQ_REG_CFG, &tmp);
|
|
tmp &= ~XADC_ZYNQ_CFG_DFIFOTH_MASK;
|
|
tmp |= 0 << XADC_ZYNQ_CFG_DFIFOTH_OFFSET;
|
|
xadc_write_reg(xadc, XADC_ZYNQ_REG_CFG, tmp);
|
|
|
|
xadc_zynq_update_intmsk(xadc, XADC_ZYNQ_INT_DFIFO_GTH, 0);
|
|
spin_unlock_irq(&xadc->lock);
|
|
|
|
ret = wait_for_completion_interruptible_timeout(&xadc->completion, HZ);
|
|
if (ret == 0)
|
|
ret = -EIO;
|
|
else
|
|
ret = 0;
|
|
|
|
xadc_read_reg(xadc, XADC_ZYNQ_REG_DFIFO, &tmp);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int xadc_zynq_read_adc_reg(struct xadc *xadc, unsigned int reg,
|
|
uint16_t *val)
|
|
{
|
|
uint32_t cmd[2];
|
|
uint32_t resp, tmp;
|
|
int ret;
|
|
|
|
cmd[0] = XADC_ZYNQ_CMD(XADC_ZYNQ_CMD_READ, reg, 0);
|
|
cmd[1] = XADC_ZYNQ_CMD(XADC_ZYNQ_CMD_NOP, 0, 0);
|
|
|
|
spin_lock_irq(&xadc->lock);
|
|
xadc_zynq_update_intmsk(xadc, XADC_ZYNQ_INT_DFIFO_GTH,
|
|
XADC_ZYNQ_INT_DFIFO_GTH);
|
|
xadc_zynq_drain_fifo(xadc);
|
|
reinit_completion(&xadc->completion);
|
|
|
|
xadc_zynq_write_fifo(xadc, cmd, ARRAY_SIZE(cmd));
|
|
xadc_read_reg(xadc, XADC_ZYNQ_REG_CFG, &tmp);
|
|
tmp &= ~XADC_ZYNQ_CFG_DFIFOTH_MASK;
|
|
tmp |= 1 << XADC_ZYNQ_CFG_DFIFOTH_OFFSET;
|
|
xadc_write_reg(xadc, XADC_ZYNQ_REG_CFG, tmp);
|
|
|
|
xadc_zynq_update_intmsk(xadc, XADC_ZYNQ_INT_DFIFO_GTH, 0);
|
|
spin_unlock_irq(&xadc->lock);
|
|
ret = wait_for_completion_interruptible_timeout(&xadc->completion, HZ);
|
|
if (ret == 0)
|
|
ret = -EIO;
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
xadc_read_reg(xadc, XADC_ZYNQ_REG_DFIFO, &resp);
|
|
xadc_read_reg(xadc, XADC_ZYNQ_REG_DFIFO, &resp);
|
|
|
|
*val = resp & 0xffff;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int xadc_zynq_transform_alarm(unsigned int alarm)
|
|
{
|
|
return ((alarm & 0x80) >> 4) |
|
|
((alarm & 0x78) << 1) |
|
|
(alarm & 0x07);
|
|
}
|
|
|
|
/*
|
|
* The ZYNQ threshold interrupts are level sensitive. Since we can't make the
|
|
* threshold condition go way from within the interrupt handler, this means as
|
|
* soon as a threshold condition is present we would enter the interrupt handler
|
|
* again and again. To work around this we mask all active thresholds interrupts
|
|
* in the interrupt handler and start a timer. In this timer we poll the
|
|
* interrupt status and only if the interrupt is inactive we unmask it again.
|
|
*/
|
|
static void xadc_zynq_unmask_worker(struct work_struct *work)
|
|
{
|
|
struct xadc *xadc = container_of(work, struct xadc, zynq_unmask_work.work);
|
|
unsigned int misc_sts, unmask;
|
|
|
|
xadc_read_reg(xadc, XADC_ZYNQ_REG_STATUS, &misc_sts);
|
|
|
|
misc_sts &= XADC_ZYNQ_INT_ALARM_MASK;
|
|
|
|
spin_lock_irq(&xadc->lock);
|
|
|
|
/* Clear those bits which are not active anymore */
|
|
unmask = (xadc->zynq_masked_alarm ^ misc_sts) & xadc->zynq_masked_alarm;
|
|
xadc->zynq_masked_alarm &= misc_sts;
|
|
|
|
/* Also clear those which are masked out anyway */
|
|
xadc->zynq_masked_alarm &= ~xadc->zynq_intmask;
|
|
|
|
/* Clear the interrupts before we unmask them */
|
|
xadc_write_reg(xadc, XADC_ZYNQ_REG_INTSTS, unmask);
|
|
|
|
xadc_zynq_update_intmsk(xadc, 0, 0);
|
|
|
|
spin_unlock_irq(&xadc->lock);
|
|
|
|
/* if still pending some alarm re-trigger the timer */
|
|
if (xadc->zynq_masked_alarm) {
|
|
schedule_delayed_work(&xadc->zynq_unmask_work,
|
|
msecs_to_jiffies(XADC_ZYNQ_UNMASK_TIMEOUT));
|
|
}
|
|
|
|
}
|
|
|
|
static irqreturn_t xadc_zynq_interrupt_handler(int irq, void *devid)
|
|
{
|
|
struct iio_dev *indio_dev = devid;
|
|
struct xadc *xadc = iio_priv(indio_dev);
|
|
uint32_t status;
|
|
|
|
xadc_read_reg(xadc, XADC_ZYNQ_REG_INTSTS, &status);
|
|
|
|
status &= ~(xadc->zynq_intmask | xadc->zynq_masked_alarm);
|
|
|
|
if (!status)
|
|
return IRQ_NONE;
|
|
|
|
spin_lock(&xadc->lock);
|
|
|
|
xadc_write_reg(xadc, XADC_ZYNQ_REG_INTSTS, status);
|
|
|
|
if (status & XADC_ZYNQ_INT_DFIFO_GTH) {
|
|
xadc_zynq_update_intmsk(xadc, XADC_ZYNQ_INT_DFIFO_GTH,
|
|
XADC_ZYNQ_INT_DFIFO_GTH);
|
|
complete(&xadc->completion);
|
|
}
|
|
|
|
status &= XADC_ZYNQ_INT_ALARM_MASK;
|
|
if (status) {
|
|
xadc->zynq_masked_alarm |= status;
|
|
/*
|
|
* mask the current event interrupt,
|
|
* unmask it when the interrupt is no more active.
|
|
*/
|
|
xadc_zynq_update_intmsk(xadc, 0, 0);
|
|
|
|
xadc_handle_events(indio_dev,
|
|
xadc_zynq_transform_alarm(status));
|
|
|
|
/* unmask the required interrupts in timer. */
|
|
schedule_delayed_work(&xadc->zynq_unmask_work,
|
|
msecs_to_jiffies(XADC_ZYNQ_UNMASK_TIMEOUT));
|
|
}
|
|
spin_unlock(&xadc->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#define XADC_ZYNQ_TCK_RATE_MAX 50000000
|
|
#define XADC_ZYNQ_IGAP_DEFAULT 20
|
|
|
|
static int xadc_zynq_setup(struct platform_device *pdev,
|
|
struct iio_dev *indio_dev, int irq)
|
|
{
|
|
struct xadc *xadc = iio_priv(indio_dev);
|
|
unsigned long pcap_rate;
|
|
unsigned int tck_div;
|
|
unsigned int div;
|
|
unsigned int igap;
|
|
unsigned int tck_rate;
|
|
|
|
/* TODO: Figure out how to make igap and tck_rate configurable */
|
|
igap = XADC_ZYNQ_IGAP_DEFAULT;
|
|
tck_rate = XADC_ZYNQ_TCK_RATE_MAX;
|
|
|
|
xadc->zynq_intmask = ~0;
|
|
|
|
pcap_rate = clk_get_rate(xadc->clk);
|
|
|
|
if (tck_rate > XADC_ZYNQ_TCK_RATE_MAX)
|
|
tck_rate = XADC_ZYNQ_TCK_RATE_MAX;
|
|
if (tck_rate > pcap_rate / 2) {
|
|
div = 2;
|
|
} else {
|
|
div = pcap_rate / tck_rate;
|
|
if (pcap_rate / div > XADC_ZYNQ_TCK_RATE_MAX)
|
|
div++;
|
|
}
|
|
|
|
if (div <= 3)
|
|
tck_div = XADC_ZYNQ_CFG_TCKRATE_DIV2;
|
|
else if (div <= 7)
|
|
tck_div = XADC_ZYNQ_CFG_TCKRATE_DIV4;
|
|
else if (div <= 15)
|
|
tck_div = XADC_ZYNQ_CFG_TCKRATE_DIV8;
|
|
else
|
|
tck_div = XADC_ZYNQ_CFG_TCKRATE_DIV16;
|
|
|
|
xadc_write_reg(xadc, XADC_ZYNQ_REG_CTL, XADC_ZYNQ_CTL_RESET);
|
|
xadc_write_reg(xadc, XADC_ZYNQ_REG_CTL, 0);
|
|
xadc_write_reg(xadc, XADC_ZYNQ_REG_INTSTS, ~0);
|
|
xadc_write_reg(xadc, XADC_ZYNQ_REG_INTMSK, xadc->zynq_intmask);
|
|
xadc_write_reg(xadc, XADC_ZYNQ_REG_CFG, XADC_ZYNQ_CFG_ENABLE |
|
|
XADC_ZYNQ_CFG_REDGE | XADC_ZYNQ_CFG_WEDGE |
|
|
tck_div | XADC_ZYNQ_CFG_IGAP(igap));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned long xadc_zynq_get_dclk_rate(struct xadc *xadc)
|
|
{
|
|
unsigned int div;
|
|
uint32_t val;
|
|
|
|
xadc_read_reg(xadc, XADC_ZYNQ_REG_CFG, &val);
|
|
|
|
switch (val & XADC_ZYNQ_CFG_TCKRATE_MASK) {
|
|
case XADC_ZYNQ_CFG_TCKRATE_DIV4:
|
|
div = 4;
|
|
break;
|
|
case XADC_ZYNQ_CFG_TCKRATE_DIV8:
|
|
div = 8;
|
|
break;
|
|
case XADC_ZYNQ_CFG_TCKRATE_DIV16:
|
|
div = 16;
|
|
break;
|
|
default:
|
|
div = 2;
|
|
break;
|
|
}
|
|
|
|
return clk_get_rate(xadc->clk) / div;
|
|
}
|
|
|
|
static void xadc_zynq_update_alarm(struct xadc *xadc, unsigned int alarm)
|
|
{
|
|
unsigned long flags;
|
|
uint32_t status;
|
|
|
|
/* Move OT to bit 7 */
|
|
alarm = ((alarm & 0x08) << 4) | ((alarm & 0xf0) >> 1) | (alarm & 0x07);
|
|
|
|
spin_lock_irqsave(&xadc->lock, flags);
|
|
|
|
/* Clear previous interrupts if any. */
|
|
xadc_read_reg(xadc, XADC_ZYNQ_REG_INTSTS, &status);
|
|
xadc_write_reg(xadc, XADC_ZYNQ_REG_INTSTS, status & alarm);
|
|
|
|
xadc_zynq_update_intmsk(xadc, XADC_ZYNQ_INT_ALARM_MASK,
|
|
~alarm & XADC_ZYNQ_INT_ALARM_MASK);
|
|
|
|
spin_unlock_irqrestore(&xadc->lock, flags);
|
|
}
|
|
|
|
static const struct xadc_ops xadc_zynq_ops = {
|
|
.read = xadc_zynq_read_adc_reg,
|
|
.write = xadc_zynq_write_adc_reg,
|
|
.setup = xadc_zynq_setup,
|
|
.get_dclk_rate = xadc_zynq_get_dclk_rate,
|
|
.interrupt_handler = xadc_zynq_interrupt_handler,
|
|
.update_alarm = xadc_zynq_update_alarm,
|
|
};
|
|
|
|
static int xadc_axi_read_adc_reg(struct xadc *xadc, unsigned int reg,
|
|
uint16_t *val)
|
|
{
|
|
uint32_t val32;
|
|
|
|
xadc_read_reg(xadc, XADC_AXI_ADC_REG_OFFSET + reg * 4, &val32);
|
|
*val = val32 & 0xffff;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xadc_axi_write_adc_reg(struct xadc *xadc, unsigned int reg,
|
|
uint16_t val)
|
|
{
|
|
xadc_write_reg(xadc, XADC_AXI_ADC_REG_OFFSET + reg * 4, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xadc_axi_setup(struct platform_device *pdev,
|
|
struct iio_dev *indio_dev, int irq)
|
|
{
|
|
struct xadc *xadc = iio_priv(indio_dev);
|
|
|
|
xadc_write_reg(xadc, XADC_AXI_REG_RESET, XADC_AXI_RESET_MAGIC);
|
|
xadc_write_reg(xadc, XADC_AXI_REG_GIER, XADC_AXI_GIER_ENABLE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t xadc_axi_interrupt_handler(int irq, void *devid)
|
|
{
|
|
struct iio_dev *indio_dev = devid;
|
|
struct xadc *xadc = iio_priv(indio_dev);
|
|
uint32_t status, mask;
|
|
unsigned int events;
|
|
|
|
xadc_read_reg(xadc, XADC_AXI_REG_IPISR, &status);
|
|
xadc_read_reg(xadc, XADC_AXI_REG_IPIER, &mask);
|
|
status &= mask;
|
|
|
|
if (!status)
|
|
return IRQ_NONE;
|
|
|
|
if ((status & XADC_AXI_INT_EOS) && xadc->trigger)
|
|
iio_trigger_poll(xadc->trigger);
|
|
|
|
if (status & XADC_AXI_INT_ALARM_MASK) {
|
|
/*
|
|
* The order of the bits in the AXI-XADC status register does
|
|
* not match the order of the bits in the XADC alarm enable
|
|
* register. xadc_handle_events() expects the events to be in
|
|
* the same order as the XADC alarm enable register.
|
|
*/
|
|
events = (status & 0x000e) >> 1;
|
|
events |= (status & 0x0001) << 3;
|
|
events |= (status & 0x3c00) >> 6;
|
|
xadc_handle_events(indio_dev, events);
|
|
}
|
|
|
|
xadc_write_reg(xadc, XADC_AXI_REG_IPISR, status);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void xadc_axi_update_alarm(struct xadc *xadc, unsigned int alarm)
|
|
{
|
|
uint32_t val;
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* The order of the bits in the AXI-XADC status register does not match
|
|
* the order of the bits in the XADC alarm enable register. We get
|
|
* passed the alarm mask in the same order as in the XADC alarm enable
|
|
* register.
|
|
*/
|
|
alarm = ((alarm & 0x07) << 1) | ((alarm & 0x08) >> 3) |
|
|
((alarm & 0xf0) << 6);
|
|
|
|
spin_lock_irqsave(&xadc->lock, flags);
|
|
xadc_read_reg(xadc, XADC_AXI_REG_IPIER, &val);
|
|
val &= ~XADC_AXI_INT_ALARM_MASK;
|
|
val |= alarm;
|
|
xadc_write_reg(xadc, XADC_AXI_REG_IPIER, val);
|
|
spin_unlock_irqrestore(&xadc->lock, flags);
|
|
}
|
|
|
|
static unsigned long xadc_axi_get_dclk(struct xadc *xadc)
|
|
{
|
|
return clk_get_rate(xadc->clk);
|
|
}
|
|
|
|
static const struct xadc_ops xadc_axi_ops = {
|
|
.read = xadc_axi_read_adc_reg,
|
|
.write = xadc_axi_write_adc_reg,
|
|
.setup = xadc_axi_setup,
|
|
.get_dclk_rate = xadc_axi_get_dclk,
|
|
.update_alarm = xadc_axi_update_alarm,
|
|
.interrupt_handler = xadc_axi_interrupt_handler,
|
|
.flags = XADC_FLAGS_BUFFERED,
|
|
};
|
|
|
|
static int _xadc_update_adc_reg(struct xadc *xadc, unsigned int reg,
|
|
uint16_t mask, uint16_t val)
|
|
{
|
|
uint16_t tmp;
|
|
int ret;
|
|
|
|
ret = _xadc_read_adc_reg(xadc, reg, &tmp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return _xadc_write_adc_reg(xadc, reg, (tmp & ~mask) | val);
|
|
}
|
|
|
|
static int xadc_update_adc_reg(struct xadc *xadc, unsigned int reg,
|
|
uint16_t mask, uint16_t val)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&xadc->mutex);
|
|
ret = _xadc_update_adc_reg(xadc, reg, mask, val);
|
|
mutex_unlock(&xadc->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static unsigned long xadc_get_dclk_rate(struct xadc *xadc)
|
|
{
|
|
return xadc->ops->get_dclk_rate(xadc);
|
|
}
|
|
|
|
static int xadc_update_scan_mode(struct iio_dev *indio_dev,
|
|
const unsigned long *mask)
|
|
{
|
|
struct xadc *xadc = iio_priv(indio_dev);
|
|
unsigned int n;
|
|
|
|
n = bitmap_weight(mask, indio_dev->masklength);
|
|
|
|
kfree(xadc->data);
|
|
xadc->data = kcalloc(n, sizeof(*xadc->data), GFP_KERNEL);
|
|
if (!xadc->data)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int xadc_scan_index_to_channel(unsigned int scan_index)
|
|
{
|
|
switch (scan_index) {
|
|
case 5:
|
|
return XADC_REG_VCCPINT;
|
|
case 6:
|
|
return XADC_REG_VCCPAUX;
|
|
case 7:
|
|
return XADC_REG_VCCO_DDR;
|
|
case 8:
|
|
return XADC_REG_TEMP;
|
|
case 9:
|
|
return XADC_REG_VCCINT;
|
|
case 10:
|
|
return XADC_REG_VCCAUX;
|
|
case 11:
|
|
return XADC_REG_VPVN;
|
|
case 12:
|
|
return XADC_REG_VREFP;
|
|
case 13:
|
|
return XADC_REG_VREFN;
|
|
case 14:
|
|
return XADC_REG_VCCBRAM;
|
|
default:
|
|
return XADC_REG_VAUX(scan_index - 16);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t xadc_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct xadc *xadc = iio_priv(indio_dev);
|
|
unsigned int chan;
|
|
int i, j;
|
|
|
|
if (!xadc->data)
|
|
goto out;
|
|
|
|
j = 0;
|
|
for_each_set_bit(i, indio_dev->active_scan_mask,
|
|
indio_dev->masklength) {
|
|
chan = xadc_scan_index_to_channel(i);
|
|
xadc_read_adc_reg(xadc, chan, &xadc->data[j]);
|
|
j++;
|
|
}
|
|
|
|
iio_push_to_buffers(indio_dev, xadc->data);
|
|
|
|
out:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int xadc_trigger_set_state(struct iio_trigger *trigger, bool state)
|
|
{
|
|
struct xadc *xadc = iio_trigger_get_drvdata(trigger);
|
|
unsigned long flags;
|
|
unsigned int convst;
|
|
unsigned int val;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&xadc->mutex);
|
|
|
|
if (state) {
|
|
/* Only one of the two triggers can be active at the a time. */
|
|
if (xadc->trigger != NULL) {
|
|
ret = -EBUSY;
|
|
goto err_out;
|
|
} else {
|
|
xadc->trigger = trigger;
|
|
if (trigger == xadc->convst_trigger)
|
|
convst = XADC_CONF0_EC;
|
|
else
|
|
convst = 0;
|
|
}
|
|
ret = _xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF0_EC,
|
|
convst);
|
|
if (ret)
|
|
goto err_out;
|
|
} else {
|
|
xadc->trigger = NULL;
|
|
}
|
|
|
|
spin_lock_irqsave(&xadc->lock, flags);
|
|
xadc_read_reg(xadc, XADC_AXI_REG_IPIER, &val);
|
|
xadc_write_reg(xadc, XADC_AXI_REG_IPISR, val & XADC_AXI_INT_EOS);
|
|
if (state)
|
|
val |= XADC_AXI_INT_EOS;
|
|
else
|
|
val &= ~XADC_AXI_INT_EOS;
|
|
xadc_write_reg(xadc, XADC_AXI_REG_IPIER, val);
|
|
spin_unlock_irqrestore(&xadc->lock, flags);
|
|
|
|
err_out:
|
|
mutex_unlock(&xadc->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct iio_trigger_ops xadc_trigger_ops = {
|
|
.set_trigger_state = &xadc_trigger_set_state,
|
|
};
|
|
|
|
static struct iio_trigger *xadc_alloc_trigger(struct iio_dev *indio_dev,
|
|
const char *name)
|
|
{
|
|
struct iio_trigger *trig;
|
|
int ret;
|
|
|
|
trig = iio_trigger_alloc("%s%d-%s", indio_dev->name,
|
|
indio_dev->id, name);
|
|
if (trig == NULL)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
trig->dev.parent = indio_dev->dev.parent;
|
|
trig->ops = &xadc_trigger_ops;
|
|
iio_trigger_set_drvdata(trig, iio_priv(indio_dev));
|
|
|
|
ret = iio_trigger_register(trig);
|
|
if (ret)
|
|
goto error_free_trig;
|
|
|
|
return trig;
|
|
|
|
error_free_trig:
|
|
iio_trigger_free(trig);
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
static int xadc_power_adc_b(struct xadc *xadc, unsigned int seq_mode)
|
|
{
|
|
uint16_t val;
|
|
|
|
switch (seq_mode) {
|
|
case XADC_CONF1_SEQ_SIMULTANEOUS:
|
|
case XADC_CONF1_SEQ_INDEPENDENT:
|
|
val = XADC_CONF2_PD_ADC_B;
|
|
break;
|
|
default:
|
|
val = 0;
|
|
break;
|
|
}
|
|
|
|
return xadc_update_adc_reg(xadc, XADC_REG_CONF2, XADC_CONF2_PD_MASK,
|
|
val);
|
|
}
|
|
|
|
static int xadc_get_seq_mode(struct xadc *xadc, unsigned long scan_mode)
|
|
{
|
|
unsigned int aux_scan_mode = scan_mode >> 16;
|
|
|
|
if (xadc->external_mux_mode == XADC_EXTERNAL_MUX_DUAL)
|
|
return XADC_CONF1_SEQ_SIMULTANEOUS;
|
|
|
|
if ((aux_scan_mode & 0xff00) == 0 ||
|
|
(aux_scan_mode & 0x00ff) == 0)
|
|
return XADC_CONF1_SEQ_CONTINUOUS;
|
|
|
|
return XADC_CONF1_SEQ_SIMULTANEOUS;
|
|
}
|
|
|
|
static int xadc_postdisable(struct iio_dev *indio_dev)
|
|
{
|
|
struct xadc *xadc = iio_priv(indio_dev);
|
|
unsigned long scan_mask;
|
|
int ret;
|
|
int i;
|
|
|
|
scan_mask = 1; /* Run calibration as part of the sequence */
|
|
for (i = 0; i < indio_dev->num_channels; i++)
|
|
scan_mask |= BIT(indio_dev->channels[i].scan_index);
|
|
|
|
/* Enable all channels and calibration */
|
|
ret = xadc_write_adc_reg(xadc, XADC_REG_SEQ(0), scan_mask & 0xffff);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = xadc_write_adc_reg(xadc, XADC_REG_SEQ(1), scan_mask >> 16);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF1_SEQ_MASK,
|
|
XADC_CONF1_SEQ_CONTINUOUS);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return xadc_power_adc_b(xadc, XADC_CONF1_SEQ_CONTINUOUS);
|
|
}
|
|
|
|
static int xadc_preenable(struct iio_dev *indio_dev)
|
|
{
|
|
struct xadc *xadc = iio_priv(indio_dev);
|
|
unsigned long scan_mask;
|
|
int seq_mode;
|
|
int ret;
|
|
|
|
ret = xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF1_SEQ_MASK,
|
|
XADC_CONF1_SEQ_DEFAULT);
|
|
if (ret)
|
|
goto err;
|
|
|
|
scan_mask = *indio_dev->active_scan_mask;
|
|
seq_mode = xadc_get_seq_mode(xadc, scan_mask);
|
|
|
|
ret = xadc_write_adc_reg(xadc, XADC_REG_SEQ(0), scan_mask & 0xffff);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = xadc_write_adc_reg(xadc, XADC_REG_SEQ(1), scan_mask >> 16);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = xadc_power_adc_b(xadc, seq_mode);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF1_SEQ_MASK,
|
|
seq_mode);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
xadc_postdisable(indio_dev);
|
|
return ret;
|
|
}
|
|
|
|
static const struct iio_buffer_setup_ops xadc_buffer_ops = {
|
|
.preenable = &xadc_preenable,
|
|
.postenable = &iio_triggered_buffer_postenable,
|
|
.predisable = &iio_triggered_buffer_predisable,
|
|
.postdisable = &xadc_postdisable,
|
|
};
|
|
|
|
static int xadc_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int *val, int *val2, long info)
|
|
{
|
|
struct xadc *xadc = iio_priv(indio_dev);
|
|
unsigned int div;
|
|
uint16_t val16;
|
|
int ret;
|
|
|
|
switch (info) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
if (iio_buffer_enabled(indio_dev))
|
|
return -EBUSY;
|
|
ret = xadc_read_adc_reg(xadc, chan->address, &val16);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val16 >>= 4;
|
|
if (chan->scan_type.sign == 'u')
|
|
*val = val16;
|
|
else
|
|
*val = sign_extend32(val16, 11);
|
|
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
switch (chan->type) {
|
|
case IIO_VOLTAGE:
|
|
/* V = (val * 3.0) / 4096 */
|
|
switch (chan->address) {
|
|
case XADC_REG_VCCINT:
|
|
case XADC_REG_VCCAUX:
|
|
case XADC_REG_VREFP:
|
|
case XADC_REG_VREFN:
|
|
case XADC_REG_VCCBRAM:
|
|
case XADC_REG_VCCPINT:
|
|
case XADC_REG_VCCPAUX:
|
|
case XADC_REG_VCCO_DDR:
|
|
*val = 3000;
|
|
break;
|
|
default:
|
|
*val = 1000;
|
|
break;
|
|
}
|
|
*val2 = 12;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
case IIO_TEMP:
|
|
/* Temp in C = (val * 503.975) / 4096 - 273.15 */
|
|
*val = 503975;
|
|
*val2 = 12;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
case IIO_CHAN_INFO_OFFSET:
|
|
/* Only the temperature channel has an offset */
|
|
*val = -((273150 << 12) / 503975);
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
ret = xadc_read_adc_reg(xadc, XADC_REG_CONF2, &val16);
|
|
if (ret)
|
|
return ret;
|
|
|
|
div = (val16 & XADC_CONF2_DIV_MASK) >> XADC_CONF2_DIV_OFFSET;
|
|
if (div < 2)
|
|
div = 2;
|
|
|
|
*val = xadc_get_dclk_rate(xadc) / div / 26;
|
|
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int xadc_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int val, int val2, long info)
|
|
{
|
|
struct xadc *xadc = iio_priv(indio_dev);
|
|
unsigned long clk_rate = xadc_get_dclk_rate(xadc);
|
|
unsigned int div;
|
|
|
|
if (info != IIO_CHAN_INFO_SAMP_FREQ)
|
|
return -EINVAL;
|
|
|
|
if (val <= 0)
|
|
return -EINVAL;
|
|
|
|
/* Max. 150 kSPS */
|
|
if (val > 150000)
|
|
val = 150000;
|
|
|
|
val *= 26;
|
|
|
|
/* Min 1MHz */
|
|
if (val < 1000000)
|
|
val = 1000000;
|
|
|
|
/*
|
|
* We want to round down, but only if we do not exceed the 150 kSPS
|
|
* limit.
|
|
*/
|
|
div = clk_rate / val;
|
|
if (clk_rate / div / 26 > 150000)
|
|
div++;
|
|
if (div < 2)
|
|
div = 2;
|
|
else if (div > 0xff)
|
|
div = 0xff;
|
|
|
|
return xadc_update_adc_reg(xadc, XADC_REG_CONF2, XADC_CONF2_DIV_MASK,
|
|
div << XADC_CONF2_DIV_OFFSET);
|
|
}
|
|
|
|
static const struct iio_event_spec xadc_temp_events[] = {
|
|
{
|
|
.type = IIO_EV_TYPE_THRESH,
|
|
.dir = IIO_EV_DIR_RISING,
|
|
.mask_separate = BIT(IIO_EV_INFO_ENABLE) |
|
|
BIT(IIO_EV_INFO_VALUE) |
|
|
BIT(IIO_EV_INFO_HYSTERESIS),
|
|
},
|
|
};
|
|
|
|
/* Separate values for upper and lower thresholds, but only a shared enabled */
|
|
static const struct iio_event_spec xadc_voltage_events[] = {
|
|
{
|
|
.type = IIO_EV_TYPE_THRESH,
|
|
.dir = IIO_EV_DIR_RISING,
|
|
.mask_separate = BIT(IIO_EV_INFO_VALUE),
|
|
}, {
|
|
.type = IIO_EV_TYPE_THRESH,
|
|
.dir = IIO_EV_DIR_FALLING,
|
|
.mask_separate = BIT(IIO_EV_INFO_VALUE),
|
|
}, {
|
|
.type = IIO_EV_TYPE_THRESH,
|
|
.dir = IIO_EV_DIR_EITHER,
|
|
.mask_separate = BIT(IIO_EV_INFO_ENABLE),
|
|
},
|
|
};
|
|
|
|
#define XADC_CHAN_TEMP(_chan, _scan_index, _addr) { \
|
|
.type = IIO_TEMP, \
|
|
.indexed = 1, \
|
|
.channel = (_chan), \
|
|
.address = (_addr), \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
|
|
BIT(IIO_CHAN_INFO_SCALE) | \
|
|
BIT(IIO_CHAN_INFO_OFFSET), \
|
|
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
|
.event_spec = xadc_temp_events, \
|
|
.num_event_specs = ARRAY_SIZE(xadc_temp_events), \
|
|
.scan_index = (_scan_index), \
|
|
.scan_type = { \
|
|
.sign = 'u', \
|
|
.realbits = 12, \
|
|
.storagebits = 16, \
|
|
.shift = 4, \
|
|
.endianness = IIO_CPU, \
|
|
}, \
|
|
}
|
|
|
|
#define XADC_CHAN_VOLTAGE(_chan, _scan_index, _addr, _ext, _alarm) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.channel = (_chan), \
|
|
.address = (_addr), \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
|
|
BIT(IIO_CHAN_INFO_SCALE), \
|
|
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
|
.event_spec = (_alarm) ? xadc_voltage_events : NULL, \
|
|
.num_event_specs = (_alarm) ? ARRAY_SIZE(xadc_voltage_events) : 0, \
|
|
.scan_index = (_scan_index), \
|
|
.scan_type = { \
|
|
.sign = ((_addr) == XADC_REG_VREFN) ? 's' : 'u', \
|
|
.realbits = 12, \
|
|
.storagebits = 16, \
|
|
.shift = 4, \
|
|
.endianness = IIO_CPU, \
|
|
}, \
|
|
.extend_name = _ext, \
|
|
}
|
|
|
|
static const struct iio_chan_spec xadc_channels[] = {
|
|
XADC_CHAN_TEMP(0, 8, XADC_REG_TEMP),
|
|
XADC_CHAN_VOLTAGE(0, 9, XADC_REG_VCCINT, "vccint", true),
|
|
XADC_CHAN_VOLTAGE(1, 10, XADC_REG_VCCAUX, "vccaux", true),
|
|
XADC_CHAN_VOLTAGE(2, 14, XADC_REG_VCCBRAM, "vccbram", true),
|
|
XADC_CHAN_VOLTAGE(3, 5, XADC_REG_VCCPINT, "vccpint", true),
|
|
XADC_CHAN_VOLTAGE(4, 6, XADC_REG_VCCPAUX, "vccpaux", true),
|
|
XADC_CHAN_VOLTAGE(5, 7, XADC_REG_VCCO_DDR, "vccoddr", true),
|
|
XADC_CHAN_VOLTAGE(6, 12, XADC_REG_VREFP, "vrefp", false),
|
|
XADC_CHAN_VOLTAGE(7, 13, XADC_REG_VREFN, "vrefn", false),
|
|
XADC_CHAN_VOLTAGE(8, 11, XADC_REG_VPVN, NULL, false),
|
|
XADC_CHAN_VOLTAGE(9, 16, XADC_REG_VAUX(0), NULL, false),
|
|
XADC_CHAN_VOLTAGE(10, 17, XADC_REG_VAUX(1), NULL, false),
|
|
XADC_CHAN_VOLTAGE(11, 18, XADC_REG_VAUX(2), NULL, false),
|
|
XADC_CHAN_VOLTAGE(12, 19, XADC_REG_VAUX(3), NULL, false),
|
|
XADC_CHAN_VOLTAGE(13, 20, XADC_REG_VAUX(4), NULL, false),
|
|
XADC_CHAN_VOLTAGE(14, 21, XADC_REG_VAUX(5), NULL, false),
|
|
XADC_CHAN_VOLTAGE(15, 22, XADC_REG_VAUX(6), NULL, false),
|
|
XADC_CHAN_VOLTAGE(16, 23, XADC_REG_VAUX(7), NULL, false),
|
|
XADC_CHAN_VOLTAGE(17, 24, XADC_REG_VAUX(8), NULL, false),
|
|
XADC_CHAN_VOLTAGE(18, 25, XADC_REG_VAUX(9), NULL, false),
|
|
XADC_CHAN_VOLTAGE(19, 26, XADC_REG_VAUX(10), NULL, false),
|
|
XADC_CHAN_VOLTAGE(20, 27, XADC_REG_VAUX(11), NULL, false),
|
|
XADC_CHAN_VOLTAGE(21, 28, XADC_REG_VAUX(12), NULL, false),
|
|
XADC_CHAN_VOLTAGE(22, 29, XADC_REG_VAUX(13), NULL, false),
|
|
XADC_CHAN_VOLTAGE(23, 30, XADC_REG_VAUX(14), NULL, false),
|
|
XADC_CHAN_VOLTAGE(24, 31, XADC_REG_VAUX(15), NULL, false),
|
|
};
|
|
|
|
static const struct iio_info xadc_info = {
|
|
.read_raw = &xadc_read_raw,
|
|
.write_raw = &xadc_write_raw,
|
|
.read_event_config = &xadc_read_event_config,
|
|
.write_event_config = &xadc_write_event_config,
|
|
.read_event_value = &xadc_read_event_value,
|
|
.write_event_value = &xadc_write_event_value,
|
|
.update_scan_mode = &xadc_update_scan_mode,
|
|
};
|
|
|
|
static const struct of_device_id xadc_of_match_table[] = {
|
|
{ .compatible = "xlnx,zynq-xadc-1.00.a", (void *)&xadc_zynq_ops },
|
|
{ .compatible = "xlnx,axi-xadc-1.00.a", (void *)&xadc_axi_ops },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, xadc_of_match_table);
|
|
|
|
static int xadc_parse_dt(struct iio_dev *indio_dev, struct device_node *np,
|
|
unsigned int *conf)
|
|
{
|
|
struct xadc *xadc = iio_priv(indio_dev);
|
|
struct iio_chan_spec *channels, *chan;
|
|
struct device_node *chan_node, *child;
|
|
unsigned int num_channels;
|
|
const char *external_mux;
|
|
u32 ext_mux_chan;
|
|
int reg;
|
|
int ret;
|
|
|
|
*conf = 0;
|
|
|
|
ret = of_property_read_string(np, "xlnx,external-mux", &external_mux);
|
|
if (ret < 0 || strcasecmp(external_mux, "none") == 0)
|
|
xadc->external_mux_mode = XADC_EXTERNAL_MUX_NONE;
|
|
else if (strcasecmp(external_mux, "single") == 0)
|
|
xadc->external_mux_mode = XADC_EXTERNAL_MUX_SINGLE;
|
|
else if (strcasecmp(external_mux, "dual") == 0)
|
|
xadc->external_mux_mode = XADC_EXTERNAL_MUX_DUAL;
|
|
else
|
|
return -EINVAL;
|
|
|
|
if (xadc->external_mux_mode != XADC_EXTERNAL_MUX_NONE) {
|
|
ret = of_property_read_u32(np, "xlnx,external-mux-channel",
|
|
&ext_mux_chan);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (xadc->external_mux_mode == XADC_EXTERNAL_MUX_SINGLE) {
|
|
if (ext_mux_chan == 0)
|
|
ext_mux_chan = XADC_REG_VPVN;
|
|
else if (ext_mux_chan <= 16)
|
|
ext_mux_chan = XADC_REG_VAUX(ext_mux_chan - 1);
|
|
else
|
|
return -EINVAL;
|
|
} else {
|
|
if (ext_mux_chan > 0 && ext_mux_chan <= 8)
|
|
ext_mux_chan = XADC_REG_VAUX(ext_mux_chan - 1);
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
|
|
*conf |= XADC_CONF0_MUX | XADC_CONF0_CHAN(ext_mux_chan);
|
|
}
|
|
|
|
channels = kmemdup(xadc_channels, sizeof(xadc_channels), GFP_KERNEL);
|
|
if (!channels)
|
|
return -ENOMEM;
|
|
|
|
num_channels = 9;
|
|
chan = &channels[9];
|
|
|
|
chan_node = of_get_child_by_name(np, "xlnx,channels");
|
|
if (chan_node) {
|
|
for_each_child_of_node(chan_node, child) {
|
|
if (num_channels >= ARRAY_SIZE(xadc_channels)) {
|
|
of_node_put(child);
|
|
break;
|
|
}
|
|
|
|
ret = of_property_read_u32(child, "reg", ®);
|
|
if (ret || reg > 16)
|
|
continue;
|
|
|
|
if (of_property_read_bool(child, "xlnx,bipolar"))
|
|
chan->scan_type.sign = 's';
|
|
|
|
if (reg == 0) {
|
|
chan->scan_index = 11;
|
|
chan->address = XADC_REG_VPVN;
|
|
} else {
|
|
chan->scan_index = 15 + reg;
|
|
chan->address = XADC_REG_VAUX(reg - 1);
|
|
}
|
|
num_channels++;
|
|
chan++;
|
|
}
|
|
}
|
|
of_node_put(chan_node);
|
|
|
|
indio_dev->num_channels = num_channels;
|
|
indio_dev->channels = krealloc(channels, sizeof(*channels) *
|
|
num_channels, GFP_KERNEL);
|
|
/* If we can't resize the channels array, just use the original */
|
|
if (!indio_dev->channels)
|
|
indio_dev->channels = channels;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xadc_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *id;
|
|
struct iio_dev *indio_dev;
|
|
unsigned int bipolar_mask;
|
|
struct resource *mem;
|
|
unsigned int conf0;
|
|
struct xadc *xadc;
|
|
int ret;
|
|
int irq;
|
|
int i;
|
|
|
|
if (!pdev->dev.of_node)
|
|
return -ENODEV;
|
|
|
|
id = of_match_node(xadc_of_match_table, pdev->dev.of_node);
|
|
if (!id)
|
|
return -EINVAL;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq <= 0)
|
|
return -ENXIO;
|
|
|
|
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*xadc));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
xadc = iio_priv(indio_dev);
|
|
xadc->ops = id->data;
|
|
init_completion(&xadc->completion);
|
|
mutex_init(&xadc->mutex);
|
|
spin_lock_init(&xadc->lock);
|
|
INIT_DELAYED_WORK(&xadc->zynq_unmask_work, xadc_zynq_unmask_worker);
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
xadc->base = devm_ioremap_resource(&pdev->dev, mem);
|
|
if (IS_ERR(xadc->base))
|
|
return PTR_ERR(xadc->base);
|
|
|
|
indio_dev->dev.parent = &pdev->dev;
|
|
indio_dev->dev.of_node = pdev->dev.of_node;
|
|
indio_dev->name = "xadc";
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &xadc_info;
|
|
|
|
ret = xadc_parse_dt(indio_dev, pdev->dev.of_node, &conf0);
|
|
if (ret)
|
|
goto err_device_free;
|
|
|
|
if (xadc->ops->flags & XADC_FLAGS_BUFFERED) {
|
|
ret = iio_triggered_buffer_setup(indio_dev,
|
|
&iio_pollfunc_store_time, &xadc_trigger_handler,
|
|
&xadc_buffer_ops);
|
|
if (ret)
|
|
goto err_device_free;
|
|
|
|
xadc->convst_trigger = xadc_alloc_trigger(indio_dev, "convst");
|
|
if (IS_ERR(xadc->convst_trigger)) {
|
|
ret = PTR_ERR(xadc->convst_trigger);
|
|
goto err_triggered_buffer_cleanup;
|
|
}
|
|
xadc->samplerate_trigger = xadc_alloc_trigger(indio_dev,
|
|
"samplerate");
|
|
if (IS_ERR(xadc->samplerate_trigger)) {
|
|
ret = PTR_ERR(xadc->samplerate_trigger);
|
|
goto err_free_convst_trigger;
|
|
}
|
|
}
|
|
|
|
xadc->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(xadc->clk)) {
|
|
ret = PTR_ERR(xadc->clk);
|
|
goto err_free_samplerate_trigger;
|
|
}
|
|
|
|
ret = clk_prepare_enable(xadc->clk);
|
|
if (ret)
|
|
goto err_free_samplerate_trigger;
|
|
|
|
ret = xadc->ops->setup(pdev, indio_dev, irq);
|
|
if (ret)
|
|
goto err_clk_disable_unprepare;
|
|
|
|
ret = request_irq(irq, xadc->ops->interrupt_handler, 0,
|
|
dev_name(&pdev->dev), indio_dev);
|
|
if (ret)
|
|
goto err_clk_disable_unprepare;
|
|
|
|
for (i = 0; i < 16; i++)
|
|
xadc_read_adc_reg(xadc, XADC_REG_THRESHOLD(i),
|
|
&xadc->threshold[i]);
|
|
|
|
ret = xadc_write_adc_reg(xadc, XADC_REG_CONF0, conf0);
|
|
if (ret)
|
|
goto err_free_irq;
|
|
|
|
bipolar_mask = 0;
|
|
for (i = 0; i < indio_dev->num_channels; i++) {
|
|
if (indio_dev->channels[i].scan_type.sign == 's')
|
|
bipolar_mask |= BIT(indio_dev->channels[i].scan_index);
|
|
}
|
|
|
|
ret = xadc_write_adc_reg(xadc, XADC_REG_INPUT_MODE(0), bipolar_mask);
|
|
if (ret)
|
|
goto err_free_irq;
|
|
ret = xadc_write_adc_reg(xadc, XADC_REG_INPUT_MODE(1),
|
|
bipolar_mask >> 16);
|
|
if (ret)
|
|
goto err_free_irq;
|
|
|
|
/* Disable all alarms */
|
|
xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF1_ALARM_MASK,
|
|
XADC_CONF1_ALARM_MASK);
|
|
|
|
/* Set thresholds to min/max */
|
|
for (i = 0; i < 16; i++) {
|
|
/*
|
|
* Set max voltage threshold and both temperature thresholds to
|
|
* 0xffff, min voltage threshold to 0.
|
|
*/
|
|
if (i % 8 < 4 || i == 7)
|
|
xadc->threshold[i] = 0xffff;
|
|
else
|
|
xadc->threshold[i] = 0;
|
|
xadc_write_adc_reg(xadc, XADC_REG_THRESHOLD(i),
|
|
xadc->threshold[i]);
|
|
}
|
|
|
|
/* Go to non-buffered mode */
|
|
xadc_postdisable(indio_dev);
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret)
|
|
goto err_free_irq;
|
|
|
|
platform_set_drvdata(pdev, indio_dev);
|
|
|
|
return 0;
|
|
|
|
err_free_irq:
|
|
free_irq(irq, indio_dev);
|
|
err_clk_disable_unprepare:
|
|
clk_disable_unprepare(xadc->clk);
|
|
err_free_samplerate_trigger:
|
|
if (xadc->ops->flags & XADC_FLAGS_BUFFERED)
|
|
iio_trigger_free(xadc->samplerate_trigger);
|
|
err_free_convst_trigger:
|
|
if (xadc->ops->flags & XADC_FLAGS_BUFFERED)
|
|
iio_trigger_free(xadc->convst_trigger);
|
|
err_triggered_buffer_cleanup:
|
|
if (xadc->ops->flags & XADC_FLAGS_BUFFERED)
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
err_device_free:
|
|
kfree(indio_dev->channels);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int xadc_remove(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
|
|
struct xadc *xadc = iio_priv(indio_dev);
|
|
int irq = platform_get_irq(pdev, 0);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
if (xadc->ops->flags & XADC_FLAGS_BUFFERED) {
|
|
iio_trigger_free(xadc->samplerate_trigger);
|
|
iio_trigger_free(xadc->convst_trigger);
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
}
|
|
free_irq(irq, indio_dev);
|
|
clk_disable_unprepare(xadc->clk);
|
|
cancel_delayed_work(&xadc->zynq_unmask_work);
|
|
kfree(xadc->data);
|
|
kfree(indio_dev->channels);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver xadc_driver = {
|
|
.probe = xadc_probe,
|
|
.remove = xadc_remove,
|
|
.driver = {
|
|
.name = "xadc",
|
|
.of_match_table = xadc_of_match_table,
|
|
},
|
|
};
|
|
module_platform_driver(xadc_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
|
|
MODULE_DESCRIPTION("Xilinx XADC IIO driver");
|