464 строки
11 KiB
C
464 строки
11 KiB
C
/*
|
|
* mag3110.c - Support for Freescale MAG3110 magnetometer sensor
|
|
*
|
|
* Copyright (c) 2013 Peter Meerwald <pmeerw@pmeerw.net>
|
|
*
|
|
* This file is subject to the terms and conditions of version 2 of
|
|
* the GNU General Public License. See the file COPYING in the main
|
|
* directory of this archive for more details.
|
|
*
|
|
* (7-bit I2C slave address 0x0e)
|
|
*
|
|
* TODO: irq, user offset, oversampling, continuous mode
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
#include <linux/delay.h>
|
|
|
|
#define MAG3110_STATUS 0x00
|
|
#define MAG3110_OUT_X 0x01 /* MSB first */
|
|
#define MAG3110_OUT_Y 0x03
|
|
#define MAG3110_OUT_Z 0x05
|
|
#define MAG3110_WHO_AM_I 0x07
|
|
#define MAG3110_OFF_X 0x09 /* MSB first */
|
|
#define MAG3110_OFF_Y 0x0b
|
|
#define MAG3110_OFF_Z 0x0d
|
|
#define MAG3110_DIE_TEMP 0x0f
|
|
#define MAG3110_CTRL_REG1 0x10
|
|
#define MAG3110_CTRL_REG2 0x11
|
|
|
|
#define MAG3110_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0))
|
|
|
|
#define MAG3110_CTRL_DR_MASK (BIT(7) | BIT(6) | BIT(5))
|
|
#define MAG3110_CTRL_DR_SHIFT 5
|
|
#define MAG3110_CTRL_DR_DEFAULT 0
|
|
|
|
#define MAG3110_CTRL_TM BIT(1) /* trigger single measurement */
|
|
#define MAG3110_CTRL_AC BIT(0) /* continuous measurements */
|
|
|
|
#define MAG3110_CTRL_AUTO_MRST_EN BIT(7) /* magnetic auto-reset */
|
|
#define MAG3110_CTRL_RAW BIT(5) /* measurements not user-offset corrected */
|
|
|
|
#define MAG3110_DEVICE_ID 0xc4
|
|
|
|
/* Each client has this additional data */
|
|
struct mag3110_data {
|
|
struct i2c_client *client;
|
|
struct mutex lock;
|
|
u8 ctrl_reg1;
|
|
};
|
|
|
|
static int mag3110_request(struct mag3110_data *data)
|
|
{
|
|
int ret, tries = 150;
|
|
|
|
/* trigger measurement */
|
|
ret = i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
|
|
data->ctrl_reg1 | MAG3110_CTRL_TM);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
while (tries-- > 0) {
|
|
ret = i2c_smbus_read_byte_data(data->client, MAG3110_STATUS);
|
|
if (ret < 0)
|
|
return ret;
|
|
/* wait for data ready */
|
|
if ((ret & MAG3110_STATUS_DRDY) == MAG3110_STATUS_DRDY)
|
|
break;
|
|
msleep(20);
|
|
}
|
|
|
|
if (tries < 0) {
|
|
dev_err(&data->client->dev, "data not ready\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mag3110_read(struct mag3110_data *data, __be16 buf[3])
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = mag3110_request(data);
|
|
if (ret < 0) {
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
}
|
|
ret = i2c_smbus_read_i2c_block_data(data->client,
|
|
MAG3110_OUT_X, 3 * sizeof(__be16), (u8 *) buf);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t mag3110_show_int_plus_micros(char *buf,
|
|
const int (*vals)[2], int n)
|
|
{
|
|
size_t len = 0;
|
|
|
|
while (n-- > 0)
|
|
len += scnprintf(buf + len, PAGE_SIZE - len,
|
|
"%d.%06d ", vals[n][0], vals[n][1]);
|
|
|
|
/* replace trailing space by newline */
|
|
buf[len - 1] = '\n';
|
|
|
|
return len;
|
|
}
|
|
|
|
static int mag3110_get_int_plus_micros_index(const int (*vals)[2], int n,
|
|
int val, int val2)
|
|
{
|
|
while (n-- > 0)
|
|
if (val == vals[n][0] && val2 == vals[n][1])
|
|
return n;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const int mag3110_samp_freq[8][2] = {
|
|
{80, 0}, {40, 0}, {20, 0}, {10, 0}, {5, 0}, {2, 500000},
|
|
{1, 250000}, {0, 625000}
|
|
};
|
|
|
|
static ssize_t mag3110_show_samp_freq_avail(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return mag3110_show_int_plus_micros(buf, mag3110_samp_freq, 8);
|
|
}
|
|
|
|
static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(mag3110_show_samp_freq_avail);
|
|
|
|
static int mag3110_get_samp_freq_index(struct mag3110_data *data,
|
|
int val, int val2)
|
|
{
|
|
return mag3110_get_int_plus_micros_index(mag3110_samp_freq, 8, val,
|
|
val2);
|
|
}
|
|
|
|
static int mag3110_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct mag3110_data *data = iio_priv(indio_dev);
|
|
__be16 buffer[3];
|
|
int i, ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = iio_device_claim_direct_mode(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (chan->type) {
|
|
case IIO_MAGN: /* in 0.1 uT / LSB */
|
|
ret = mag3110_read(data, buffer);
|
|
if (ret < 0)
|
|
goto release;
|
|
*val = sign_extend32(
|
|
be16_to_cpu(buffer[chan->scan_index]), 15);
|
|
ret = IIO_VAL_INT;
|
|
break;
|
|
case IIO_TEMP: /* in 1 C / LSB */
|
|
mutex_lock(&data->lock);
|
|
ret = mag3110_request(data);
|
|
if (ret < 0) {
|
|
mutex_unlock(&data->lock);
|
|
goto release;
|
|
}
|
|
ret = i2c_smbus_read_byte_data(data->client,
|
|
MAG3110_DIE_TEMP);
|
|
mutex_unlock(&data->lock);
|
|
if (ret < 0)
|
|
goto release;
|
|
*val = sign_extend32(ret, 7);
|
|
ret = IIO_VAL_INT;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
release:
|
|
iio_device_release_direct_mode(indio_dev);
|
|
return ret;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
switch (chan->type) {
|
|
case IIO_MAGN:
|
|
*val = 0;
|
|
*val2 = 1000;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_TEMP:
|
|
*val = 1000;
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
i = data->ctrl_reg1 >> MAG3110_CTRL_DR_SHIFT;
|
|
*val = mag3110_samp_freq[i][0];
|
|
*val2 = mag3110_samp_freq[i][1];
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_CHAN_INFO_CALIBBIAS:
|
|
ret = i2c_smbus_read_word_swapped(data->client,
|
|
MAG3110_OFF_X + 2 * chan->scan_index);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = sign_extend32(ret >> 1, 14);
|
|
return IIO_VAL_INT;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int mag3110_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
struct mag3110_data *data = iio_priv(indio_dev);
|
|
int rate, ret;
|
|
|
|
ret = iio_device_claim_direct_mode(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
rate = mag3110_get_samp_freq_index(data, val, val2);
|
|
if (rate < 0) {
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
data->ctrl_reg1 &= ~MAG3110_CTRL_DR_MASK;
|
|
data->ctrl_reg1 |= rate << MAG3110_CTRL_DR_SHIFT;
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
MAG3110_CTRL_REG1, data->ctrl_reg1);
|
|
break;
|
|
case IIO_CHAN_INFO_CALIBBIAS:
|
|
if (val < -10000 || val > 10000) {
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
ret = i2c_smbus_write_word_swapped(data->client,
|
|
MAG3110_OFF_X + 2 * chan->scan_index, val << 1);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
iio_device_release_direct_mode(indio_dev);
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t mag3110_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct mag3110_data *data = iio_priv(indio_dev);
|
|
u8 buffer[16]; /* 3 16-bit channels + 1 byte temp + padding + ts */
|
|
int ret;
|
|
|
|
ret = mag3110_read(data, (__be16 *) buffer);
|
|
if (ret < 0)
|
|
goto done;
|
|
|
|
if (test_bit(3, indio_dev->active_scan_mask)) {
|
|
ret = i2c_smbus_read_byte_data(data->client,
|
|
MAG3110_DIE_TEMP);
|
|
if (ret < 0)
|
|
goto done;
|
|
buffer[6] = ret;
|
|
}
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, buffer,
|
|
iio_get_time_ns(indio_dev));
|
|
|
|
done:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#define MAG3110_CHANNEL(axis, idx) { \
|
|
.type = IIO_MAGN, \
|
|
.modified = 1, \
|
|
.channel2 = IIO_MOD_##axis, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
|
|
BIT(IIO_CHAN_INFO_CALIBBIAS), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
|
|
BIT(IIO_CHAN_INFO_SCALE), \
|
|
.scan_index = idx, \
|
|
.scan_type = { \
|
|
.sign = 's', \
|
|
.realbits = 16, \
|
|
.storagebits = 16, \
|
|
.endianness = IIO_BE, \
|
|
}, \
|
|
}
|
|
|
|
static const struct iio_chan_spec mag3110_channels[] = {
|
|
MAG3110_CHANNEL(X, 0),
|
|
MAG3110_CHANNEL(Y, 1),
|
|
MAG3110_CHANNEL(Z, 2),
|
|
{
|
|
.type = IIO_TEMP,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE),
|
|
.scan_index = 3,
|
|
.scan_type = {
|
|
.sign = 's',
|
|
.realbits = 8,
|
|
.storagebits = 8,
|
|
},
|
|
},
|
|
IIO_CHAN_SOFT_TIMESTAMP(4),
|
|
};
|
|
|
|
static struct attribute *mag3110_attributes[] = {
|
|
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group mag3110_group = {
|
|
.attrs = mag3110_attributes,
|
|
};
|
|
|
|
static const struct iio_info mag3110_info = {
|
|
.attrs = &mag3110_group,
|
|
.read_raw = &mag3110_read_raw,
|
|
.write_raw = &mag3110_write_raw,
|
|
};
|
|
|
|
static const unsigned long mag3110_scan_masks[] = {0x7, 0xf, 0};
|
|
|
|
static int mag3110_standby(struct mag3110_data *data)
|
|
{
|
|
return i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
|
|
data->ctrl_reg1 & ~MAG3110_CTRL_AC);
|
|
}
|
|
|
|
static int mag3110_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct mag3110_data *data;
|
|
struct iio_dev *indio_dev;
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(client, MAG3110_WHO_AM_I);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret != MAG3110_DEVICE_ID)
|
|
return -ENODEV;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
data->client = client;
|
|
mutex_init(&data->lock);
|
|
|
|
i2c_set_clientdata(client, indio_dev);
|
|
indio_dev->info = &mag3110_info;
|
|
indio_dev->name = id->name;
|
|
indio_dev->dev.parent = &client->dev;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = mag3110_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(mag3110_channels);
|
|
indio_dev->available_scan_masks = mag3110_scan_masks;
|
|
|
|
data->ctrl_reg1 = MAG3110_CTRL_DR_DEFAULT << MAG3110_CTRL_DR_SHIFT;
|
|
ret = i2c_smbus_write_byte_data(client, MAG3110_CTRL_REG1,
|
|
data->ctrl_reg1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = i2c_smbus_write_byte_data(client, MAG3110_CTRL_REG2,
|
|
MAG3110_CTRL_AUTO_MRST_EN);
|
|
if (ret < 0)
|
|
goto standby_on_error;
|
|
|
|
ret = iio_triggered_buffer_setup(indio_dev, NULL,
|
|
mag3110_trigger_handler, NULL);
|
|
if (ret < 0)
|
|
goto standby_on_error;
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret < 0)
|
|
goto buffer_cleanup;
|
|
return 0;
|
|
|
|
buffer_cleanup:
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
standby_on_error:
|
|
mag3110_standby(iio_priv(indio_dev));
|
|
return ret;
|
|
}
|
|
|
|
static int mag3110_remove(struct i2c_client *client)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
mag3110_standby(iio_priv(indio_dev));
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int mag3110_suspend(struct device *dev)
|
|
{
|
|
return mag3110_standby(iio_priv(i2c_get_clientdata(
|
|
to_i2c_client(dev))));
|
|
}
|
|
|
|
static int mag3110_resume(struct device *dev)
|
|
{
|
|
struct mag3110_data *data = iio_priv(i2c_get_clientdata(
|
|
to_i2c_client(dev)));
|
|
|
|
return i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
|
|
data->ctrl_reg1);
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(mag3110_pm_ops, mag3110_suspend, mag3110_resume);
|
|
#define MAG3110_PM_OPS (&mag3110_pm_ops)
|
|
#else
|
|
#define MAG3110_PM_OPS NULL
|
|
#endif
|
|
|
|
static const struct i2c_device_id mag3110_id[] = {
|
|
{ "mag3110", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mag3110_id);
|
|
|
|
static const struct of_device_id mag3110_of_match[] = {
|
|
{ .compatible = "fsl,mag3110" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mag3110_of_match);
|
|
|
|
static struct i2c_driver mag3110_driver = {
|
|
.driver = {
|
|
.name = "mag3110",
|
|
.of_match_table = mag3110_of_match,
|
|
.pm = MAG3110_PM_OPS,
|
|
},
|
|
.probe = mag3110_probe,
|
|
.remove = mag3110_remove,
|
|
.id_table = mag3110_id,
|
|
};
|
|
module_i2c_driver(mag3110_driver);
|
|
|
|
MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
|
|
MODULE_DESCRIPTION("Freescale MAG3110 magnetometer driver");
|
|
MODULE_LICENSE("GPL");
|