WSL2-Linux-Kernel/drivers/net/au1000_eth.h

131 строка
3.1 KiB
C

/*
*
* Alchemy Au1x00 ethernet driver include file
*
* Author: Pete Popov <ppopov@mvista.com>
*
* Copyright 2001 MontaVista Software Inc.
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
*
*/
#define MAC_IOSIZE 0x10000
#define NUM_RX_DMA 4 /* Au1x00 has 4 rx hardware descriptors */
#define NUM_TX_DMA 4 /* Au1x00 has 4 tx hardware descriptors */
#define NUM_RX_BUFFS 4
#define NUM_TX_BUFFS 4
#define MAX_BUF_SIZE 2048
#define ETH_TX_TIMEOUT (HZ/4)
#define MAC_MIN_PKT_SIZE 64
#define MULTICAST_FILTER_LIMIT 64
/*
* Data Buffer Descriptor. Data buffers must be aligned on 32 byte
* boundary for both, receive and transmit.
*/
typedef struct db_dest {
struct db_dest *pnext;
volatile u32 *vaddr;
dma_addr_t dma_addr;
} db_dest_t;
/*
* The transmit and receive descriptors are memory
* mapped registers.
*/
typedef struct tx_dma {
u32 status;
u32 buff_stat;
u32 len;
u32 pad;
} tx_dma_t;
typedef struct rx_dma {
u32 status;
u32 buff_stat;
u32 pad[2];
} rx_dma_t;
/*
* MAC control registers, memory mapped.
*/
typedef struct mac_reg {
u32 control;
u32 mac_addr_high;
u32 mac_addr_low;
u32 multi_hash_high;
u32 multi_hash_low;
u32 mii_control;
u32 mii_data;
u32 flow_control;
u32 vlan1_tag;
u32 vlan2_tag;
} mac_reg_t;
struct au1000_private {
db_dest_t *pDBfree;
db_dest_t db[NUM_RX_BUFFS+NUM_TX_BUFFS];
volatile rx_dma_t *rx_dma_ring[NUM_RX_DMA];
volatile tx_dma_t *tx_dma_ring[NUM_TX_DMA];
db_dest_t *rx_db_inuse[NUM_RX_DMA];
db_dest_t *tx_db_inuse[NUM_TX_DMA];
u32 rx_head;
u32 tx_head;
u32 tx_tail;
u32 tx_full;
int mac_id;
int mac_enabled; /* whether MAC is currently enabled and running (req. for mdio) */
int old_link; /* used by au1000_adjust_link */
int old_speed;
int old_duplex;
struct phy_device *phy_dev;
struct mii_bus *mii_bus;
/* PHY configuration */
int phy_static_config;
int phy_search_highest_addr;
int phy1_search_mac0;
int phy_addr;
int phy_busid;
int phy_irq;
/* These variables are just for quick access to certain regs addresses. */
volatile mac_reg_t *mac; /* mac registers */
volatile u32 *enable; /* address of MAC Enable Register */
u32 vaddr; /* virtual address of rx/tx buffers */
dma_addr_t dma_addr; /* dma address of rx/tx buffers */
spinlock_t lock; /* Serialise access to device */
u32 msg_enable;
};