microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/acpi/pci_root.c

960 строки
26 KiB
C
Исходник Ответственный История

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* pci_root.c - ACPI PCI Root Bridge Driver ($Revision: 40 $)
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/mutex.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/pci.h>
#include <linux/pci-acpi.h>
#include <linux/dmar.h>
#include <linux/acpi.h>
#include <linux/slab.h>
#include <linux/dmi.h>
#include <linux/platform_data/x86/apple.h>
#include <acpi/apei.h> /* for acpi_hest_init() */
#include "internal.h"
#define ACPI_PCI_ROOT_CLASS "pci_bridge"
#define ACPI_PCI_ROOT_DEVICE_NAME "PCI Root Bridge"
static int acpi_pci_root_add(struct acpi_device *device,
const struct acpi_device_id *not_used);
static void acpi_pci_root_remove(struct acpi_device *device);
static int acpi_pci_root_scan_dependent(struct acpi_device *adev)
{
acpiphp_check_host_bridge(adev);
return 0;
}
#define ACPI_PCIE_REQ_SUPPORT (OSC_PCI_EXT_CONFIG_SUPPORT \
| OSC_PCI_ASPM_SUPPORT \
| OSC_PCI_CLOCK_PM_SUPPORT \
| OSC_PCI_MSI_SUPPORT)
static const struct acpi_device_id root_device_ids[] = {
{"PNP0A03", 0},
{"", 0},
};
static struct acpi_scan_handler pci_root_handler = {
.ids = root_device_ids,
.attach = acpi_pci_root_add,
.detach = acpi_pci_root_remove,
.hotplug = {
.enabled = true,
.scan_dependent = acpi_pci_root_scan_dependent,
},
};
static DEFINE_MUTEX(osc_lock);
/**
* acpi_is_root_bridge - determine whether an ACPI CA node is a PCI root bridge
* @handle: the ACPI CA node in question.
*
* Note: we could make this API take a struct acpi_device * instead, but
* for now, it's more convenient to operate on an acpi_handle.
*/
int acpi_is_root_bridge(acpi_handle handle)
{
int ret;
struct acpi_device *device;
ret = acpi_bus_get_device(handle, &device);
if (ret)
return 0;
ret = acpi_match_device_ids(device, root_device_ids);
if (ret)
return 0;
else
return 1;
}
EXPORT_SYMBOL_GPL(acpi_is_root_bridge);
static acpi_status
get_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
{
struct resource *res = data;
struct acpi_resource_address64 address;
acpi_status status;
status = acpi_resource_to_address64(resource, &address);
if (ACPI_FAILURE(status))
return AE_OK;
if ((address.address.address_length > 0) &&
(address.resource_type == ACPI_BUS_NUMBER_RANGE)) {
res->start = address.address.minimum;
res->end = address.address.minimum + address.address.address_length - 1;
}
return AE_OK;
}
static acpi_status try_get_root_bridge_busnr(acpi_handle handle,
struct resource *res)
{
acpi_status status;
res->start = -1;
status =
acpi_walk_resources(handle, METHOD_NAME__CRS,
get_root_bridge_busnr_callback, res);
if (ACPI_FAILURE(status))
return status;
if (res->start == -1)
return AE_ERROR;
return AE_OK;
}
struct pci_osc_bit_struct {
u32 bit;
char *desc;
};
static struct pci_osc_bit_struct pci_osc_support_bit[] = {
{ OSC_PCI_EXT_CONFIG_SUPPORT, "ExtendedConfig" },
{ OSC_PCI_ASPM_SUPPORT, "ASPM" },
{ OSC_PCI_CLOCK_PM_SUPPORT, "ClockPM" },
{ OSC_PCI_SEGMENT_GROUPS_SUPPORT, "Segments" },
{ OSC_PCI_MSI_SUPPORT, "MSI" },
{ OSC_PCI_EDR_SUPPORT, "EDR" },
{ OSC_PCI_HPX_TYPE_3_SUPPORT, "HPX-Type3" },
};
static struct pci_osc_bit_struct pci_osc_control_bit[] = {
{ OSC_PCI_EXPRESS_NATIVE_HP_CONTROL, "PCIeHotplug" },
{ OSC_PCI_SHPC_NATIVE_HP_CONTROL, "SHPCHotplug" },
{ OSC_PCI_EXPRESS_PME_CONTROL, "PME" },
{ OSC_PCI_EXPRESS_AER_CONTROL, "AER" },
{ OSC_PCI_EXPRESS_CAPABILITY_CONTROL, "PCIeCapability" },
{ OSC_PCI_EXPRESS_LTR_CONTROL, "LTR" },
{ OSC_PCI_EXPRESS_DPC_CONTROL, "DPC" },
};
static void decode_osc_bits(struct acpi_pci_root *root, char *msg, u32 word,
struct pci_osc_bit_struct *table, int size)
{
char buf[80];
int i, len = 0;
struct pci_osc_bit_struct *entry;
buf[0] = '\0';
for (i = 0, entry = table; i < size; i++, entry++)
if (word & entry->bit)
len += scnprintf(buf + len, sizeof(buf) - len, "%s%s",
len ? " " : "", entry->desc);
dev_info(&root->device->dev, "_OSC: %s [%s]\n", msg, buf);
}
static void decode_osc_support(struct acpi_pci_root *root, char *msg, u32 word)
{
decode_osc_bits(root, msg, word, pci_osc_support_bit,
ARRAY_SIZE(pci_osc_support_bit));
}
static void decode_osc_control(struct acpi_pci_root *root, char *msg, u32 word)
{
decode_osc_bits(root, msg, word, pci_osc_control_bit,
ARRAY_SIZE(pci_osc_control_bit));
}
static u8 pci_osc_uuid_str[] = "33DB4D5B-1FF7-401C-9657-7441C03DD766";
static acpi_status acpi_pci_run_osc(acpi_handle handle,
const u32 *capbuf, u32 *retval)
{
struct acpi_osc_context context = {
.uuid_str = pci_osc_uuid_str,
.rev = 1,
.cap.length = 12,
.cap.pointer = (void *)capbuf,
};
acpi_status status;
status = acpi_run_osc(handle, &context);
if (ACPI_SUCCESS(status)) {
*retval = *((u32 *)(context.ret.pointer + 8));
kfree(context.ret.pointer);
}
return status;
}
static acpi_status acpi_pci_query_osc(struct acpi_pci_root *root,
u32 support,
u32 *control)
{
acpi_status status;
u32 result, capbuf[3];
support &= OSC_PCI_SUPPORT_MASKS;
support |= root->osc_support_set;
capbuf[OSC_QUERY_DWORD] = OSC_QUERY_ENABLE;
capbuf[OSC_SUPPORT_DWORD] = support;
if (control) {
*control &= OSC_PCI_CONTROL_MASKS;
capbuf[OSC_CONTROL_DWORD] = *control | root->osc_control_set;
} else {
/* Run _OSC query only with existing controls. */
capbuf[OSC_CONTROL_DWORD] = root->osc_control_set;
}
status = acpi_pci_run_osc(root->device->handle, capbuf, &result);
if (ACPI_SUCCESS(status)) {
root->osc_support_set = support;
if (control)
*control = result;
}
return status;
}
static acpi_status acpi_pci_osc_support(struct acpi_pci_root *root, u32 flags)
{
acpi_status status;
mutex_lock(&osc_lock);
status = acpi_pci_query_osc(root, flags, NULL);
mutex_unlock(&osc_lock);
return status;
}
struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle)
{
struct acpi_pci_root *root;
struct acpi_device *device;
if (acpi_bus_get_device(handle, &device) ||
acpi_match_device_ids(device, root_device_ids))
return NULL;
root = acpi_driver_data(device);
return root;
}
EXPORT_SYMBOL_GPL(acpi_pci_find_root);
struct acpi_handle_node {
struct list_head node;
acpi_handle handle;
};
/**
* acpi_get_pci_dev - convert ACPI CA handle to struct pci_dev
* @handle: the handle in question
*
* Given an ACPI CA handle, the desired PCI device is located in the
* list of PCI devices.
*
* If the device is found, its reference count is increased and this
* function returns a pointer to its data structure. The caller must
* decrement the reference count by calling pci_dev_put().
* If no device is found, %NULL is returned.
*/
struct pci_dev *acpi_get_pci_dev(acpi_handle handle)
{
int dev, fn;
unsigned long long adr;
acpi_status status;
acpi_handle phandle;
struct pci_bus *pbus;
struct pci_dev *pdev = NULL;
struct acpi_handle_node *node, *tmp;
struct acpi_pci_root *root;
LIST_HEAD(device_list);
/*
* Walk up the ACPI CA namespace until we reach a PCI root bridge.
*/
phandle = handle;
while (!acpi_is_root_bridge(phandle)) {
node = kzalloc(sizeof(struct acpi_handle_node), GFP_KERNEL);
if (!node)
goto out;
INIT_LIST_HEAD(&node->node);
node->handle = phandle;
list_add(&node->node, &device_list);
status = acpi_get_parent(phandle, &phandle);
if (ACPI_FAILURE(status))
goto out;
}
root = acpi_pci_find_root(phandle);
if (!root)
goto out;
pbus = root->bus;
/*
* Now, walk back down the PCI device tree until we return to our
* original handle. Assumes that everything between the PCI root
* bridge and the device we're looking for must be a P2P bridge.
*/
list_for_each_entry(node, &device_list, node) {
acpi_handle hnd = node->handle;
status = acpi_evaluate_integer(hnd, "_ADR", NULL, &adr);
if (ACPI_FAILURE(status))
goto out;
dev = (adr >> 16) & 0xffff;
fn = adr & 0xffff;
pdev = pci_get_slot(pbus, PCI_DEVFN(dev, fn));
if (!pdev || hnd == handle)
break;
pbus = pdev->subordinate;
pci_dev_put(pdev);
/*
* This function may be called for a non-PCI device that has a
* PCI parent (eg. a disk under a PCI SATA controller). In that
* case pdev->subordinate will be NULL for the parent.
*/
if (!pbus) {
dev_dbg(&pdev->dev, "Not a PCI-to-PCI bridge\n");
pdev = NULL;
break;
}
}
out:
list_for_each_entry_safe(node, tmp, &device_list, node)
kfree(node);
return pdev;
}
EXPORT_SYMBOL_GPL(acpi_get_pci_dev);
/**
* acpi_pci_osc_control_set - Request control of PCI root _OSC features.
* @handle: ACPI handle of a PCI root bridge (or PCIe Root Complex).
* @mask: Mask of _OSC bits to request control of, place to store control mask.
* @req: Mask of _OSC bits the control of is essential to the caller.
*
* Run _OSC query for @mask and if that is successful, compare the returned
* mask of control bits with @req. If all of the @req bits are set in the
* returned mask, run _OSC request for it.
*
* The variable at the @mask address may be modified regardless of whether or
* not the function returns success. On success it will contain the mask of
* _OSC bits the BIOS has granted control of, but its contents are meaningless
* on failure.
**/
acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 *mask, u32 req)
{
struct acpi_pci_root *root;
acpi_status status = AE_OK;
u32 ctrl, capbuf[3];
if (!mask)
return AE_BAD_PARAMETER;
ctrl = *mask & OSC_PCI_CONTROL_MASKS;
if ((ctrl & req) != req)
return AE_TYPE;
root = acpi_pci_find_root(handle);
if (!root)
return AE_NOT_EXIST;
mutex_lock(&osc_lock);
*mask = ctrl | root->osc_control_set;
/* No need to evaluate _OSC if the control was already granted. */
if ((root->osc_control_set & ctrl) == ctrl)
goto out;
/* Need to check the available controls bits before requesting them. */
while (*mask) {
status = acpi_pci_query_osc(root, root->osc_support_set, mask);
if (ACPI_FAILURE(status))
goto out;
if (ctrl == *mask)
break;
decode_osc_control(root, "platform does not support",
ctrl & ~(*mask));
ctrl = *mask;
}
if ((ctrl & req) != req) {
decode_osc_control(root, "not requesting control; platform does not support",
req & ~(ctrl));
status = AE_SUPPORT;
goto out;
}
capbuf[OSC_QUERY_DWORD] = 0;
capbuf[OSC_SUPPORT_DWORD] = root->osc_support_set;
capbuf[OSC_CONTROL_DWORD] = ctrl;
status = acpi_pci_run_osc(handle, capbuf, mask);
if (ACPI_SUCCESS(status))
root->osc_control_set = *mask;
out:
mutex_unlock(&osc_lock);
return status;
}
EXPORT_SYMBOL(acpi_pci_osc_control_set);
static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
bool is_pcie)
{
u32 support, control, requested;
acpi_status status;
struct acpi_device *device = root->device;
acpi_handle handle = device->handle;
/*
* Apple always return failure on _OSC calls when _OSI("Darwin") has
* been called successfully. We know the feature set supported by the
* platform, so avoid calling _OSC at all
*/
if (x86_apple_machine) {
root->osc_control_set = ~OSC_PCI_EXPRESS_PME_CONTROL;
decode_osc_control(root, "OS assumes control of",
root->osc_control_set);
return;
}
/*
* All supported architectures that use ACPI have support for
* PCI domains, so we indicate this in _OSC support capabilities.
*/
support = OSC_PCI_SEGMENT_GROUPS_SUPPORT;
support |= OSC_PCI_HPX_TYPE_3_SUPPORT;
if (pci_ext_cfg_avail())
support |= OSC_PCI_EXT_CONFIG_SUPPORT;
if (pcie_aspm_support_enabled())
support |= OSC_PCI_ASPM_SUPPORT | OSC_PCI_CLOCK_PM_SUPPORT;
if (pci_msi_enabled())
support |= OSC_PCI_MSI_SUPPORT;
if (IS_ENABLED(CONFIG_PCIE_EDR))
support |= OSC_PCI_EDR_SUPPORT;
decode_osc_support(root, "OS supports", support);
status = acpi_pci_osc_support(root, support);
if (ACPI_FAILURE(status)) {
*no_aspm = 1;
/* _OSC is optional for PCI host bridges */
if ((status == AE_NOT_FOUND) && !is_pcie)
return;
dev_info(&device->dev, "_OSC failed (%s)%s\n",
acpi_format_exception(status),
pcie_aspm_support_enabled() ? "; disabling ASPM" : "");
return;
}
if (pcie_ports_disabled) {
dev_info(&device->dev, "PCIe port services disabled; not requesting _OSC control\n");
return;
}
if ((support & ACPI_PCIE_REQ_SUPPORT) != ACPI_PCIE_REQ_SUPPORT) {
decode_osc_support(root, "not requesting OS control; OS requires",
ACPI_PCIE_REQ_SUPPORT);
return;
}
control = OSC_PCI_EXPRESS_CAPABILITY_CONTROL
| OSC_PCI_EXPRESS_PME_CONTROL;
if (IS_ENABLED(CONFIG_PCIEASPM))
control |= OSC_PCI_EXPRESS_LTR_CONTROL;
if (IS_ENABLED(CONFIG_HOTPLUG_PCI_PCIE))
control |= OSC_PCI_EXPRESS_NATIVE_HP_CONTROL;
if (IS_ENABLED(CONFIG_HOTPLUG_PCI_SHPC))
control |= OSC_PCI_SHPC_NATIVE_HP_CONTROL;
if (pci_aer_available())
control |= OSC_PCI_EXPRESS_AER_CONTROL;
/*
* Per the Downstream Port Containment Related Enhancements ECN to
* the PCI Firmware Spec, r3.2, sec 4.5.1, table 4-5,
* OSC_PCI_EXPRESS_DPC_CONTROL indicates the OS supports both DPC
* and EDR.
*/
if (IS_ENABLED(CONFIG_PCIE_DPC) && IS_ENABLED(CONFIG_PCIE_EDR))
control |= OSC_PCI_EXPRESS_DPC_CONTROL;
requested = control;
status = acpi_pci_osc_control_set(handle, &control,
OSC_PCI_EXPRESS_CAPABILITY_CONTROL);
if (ACPI_SUCCESS(status)) {
decode_osc_control(root, "OS now controls", control);
if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) {
/*
* We have ASPM control, but the FADT indicates that
* it's unsupported. Leave existing configuration
* intact and prevent the OS from touching it.
*/
dev_info(&device->dev, "FADT indicates ASPM is unsupported, using BIOS configuration\n");
*no_aspm = 1;
}
} else {
decode_osc_control(root, "OS requested", requested);
decode_osc_control(root, "platform willing to grant", control);
dev_info(&device->dev, "_OSC failed (%s); disabling ASPM\n",
acpi_format_exception(status));
/*
* We want to disable ASPM here, but aspm_disabled
* needs to remain in its state from boot so that we
* properly handle PCIe 1.1 devices. So we set this
* flag here, to defer the action until after the ACPI
* root scan.
*/
*no_aspm = 1;
}
}
static int acpi_pci_root_add(struct acpi_device *device,
const struct acpi_device_id *not_used)
{
unsigned long long segment, bus;
acpi_status status;
int result;
struct acpi_pci_root *root;
acpi_handle handle = device->handle;
int no_aspm = 0;
bool hotadd = system_state == SYSTEM_RUNNING;
bool is_pcie;
root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
if (!root)
return -ENOMEM;
segment = 0;
status = acpi_evaluate_integer(handle, METHOD_NAME__SEG, NULL,
&segment);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
dev_err(&device->dev, "can't evaluate _SEG\n");
result = -ENODEV;
goto end;
}
/* Check _CRS first, then _BBN. If no _BBN, default to zero. */
root->secondary.flags = IORESOURCE_BUS;
status = try_get_root_bridge_busnr(handle, &root->secondary);
if (ACPI_FAILURE(status)) {
/*
* We need both the start and end of the downstream bus range
* to interpret _CBA (MMCONFIG base address), so it really is
* supposed to be in _CRS. If we don't find it there, all we
* can do is assume [_BBN-0xFF] or [0-0xFF].
*/
root->secondary.end = 0xFF;
dev_warn(&device->dev,
FW_BUG "no secondary bus range in _CRS\n");
status = acpi_evaluate_integer(handle, METHOD_NAME__BBN,
NULL, &bus);
if (ACPI_SUCCESS(status))
root->secondary.start = bus;
else if (status == AE_NOT_FOUND)
root->secondary.start = 0;
else {
dev_err(&device->dev, "can't evaluate _BBN\n");
result = -ENODEV;
goto end;
}
}
root->device = device;
root->segment = segment & 0xFFFF;
strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
device->driver_data = root;
if (hotadd && dmar_device_add(handle)) {
result = -ENXIO;
goto end;
}
pr_info(PREFIX "%s [%s] (domain %04x %pR)\n",
acpi_device_name(device), acpi_device_bid(device),
root->segment, &root->secondary);
root->mcfg_addr = acpi_pci_root_get_mcfg_addr(handle);
is_pcie = strcmp(acpi_device_hid(device), "PNP0A08") == 0;
negotiate_os_control(root, &no_aspm, is_pcie);
/*
* TBD: Need PCI interface for enumeration/configuration of roots.
*/
/*
* Scan the Root Bridge
* --------------------
* Must do this prior to any attempt to bind the root device, as the
* PCI namespace does not get created until this call is made (and
* thus the root bridge's pci_dev does not exist).
*/
root->bus = pci_acpi_scan_root(root);
if (!root->bus) {
dev_err(&device->dev,
"Bus %04x:%02x not present in PCI namespace\n",
root->segment, (unsigned int)root->secondary.start);
device->driver_data = NULL;
result = -ENODEV;
goto remove_dmar;
}
if (no_aspm)
pcie_no_aspm();
pci_acpi_add_bus_pm_notifier(device);
device_set_wakeup_capable(root->bus->bridge, device->wakeup.flags.valid);
if (hotadd) {
pcibios_resource_survey_bus(root->bus);
pci_assign_unassigned_root_bus_resources(root->bus);
/*
* This is only called for the hotadd case. For the boot-time
* case, we need to wait until after PCI initialization in
* order to deal with IOAPICs mapped in on a PCI BAR.
*
* This is currently x86-specific, because acpi_ioapic_add()
* is an empty function without CONFIG_ACPI_HOTPLUG_IOAPIC.
* And CONFIG_ACPI_HOTPLUG_IOAPIC depends on CONFIG_X86_IO_APIC
* (see drivers/acpi/Kconfig).
*/
acpi_ioapic_add(root->device->handle);
}
pci_lock_rescan_remove();
pci_bus_add_devices(root->bus);
pci_unlock_rescan_remove();
return 1;
remove_dmar:
if (hotadd)
dmar_device_remove(handle);
end:
kfree(root);
return result;
}
static void acpi_pci_root_remove(struct acpi_device *device)
{
struct acpi_pci_root *root = acpi_driver_data(device);
pci_lock_rescan_remove();
pci_stop_root_bus(root->bus);
pci_ioapic_remove(root);
device_set_wakeup_capable(root->bus->bridge, false);
pci_acpi_remove_bus_pm_notifier(device);
pci_remove_root_bus(root->bus);
WARN_ON(acpi_ioapic_remove(root));
dmar_device_remove(device->handle);
pci_unlock_rescan_remove();
kfree(root);
}
/*
* Following code to support acpi_pci_root_create() is copied from
* arch/x86/pci/acpi.c and modified so it could be reused by x86, IA64
* and ARM64.
*/
static void acpi_pci_root_validate_resources(struct device *dev,
struct list_head *resources,
unsigned long type)
{
LIST_HEAD(list);
struct resource *res1, *res2, *root = NULL;
struct resource_entry *tmp, *entry, *entry2;
BUG_ON((type & (IORESOURCE_MEM | IORESOURCE_IO)) == 0);
root = (type & IORESOURCE_MEM) ? &iomem_resource : &ioport_resource;
list_splice_init(resources, &list);
resource_list_for_each_entry_safe(entry, tmp, &list) {
bool free = false;
resource_size_t end;
res1 = entry->res;
if (!(res1->flags & type))
goto next;
/* Exclude non-addressable range or non-addressable portion */
end = min(res1->end, root->end);
if (end <= res1->start) {
dev_info(dev, "host bridge window %pR (ignored, not CPU addressable)\n",
res1);
free = true;
goto next;
} else if (res1->end != end) {
dev_info(dev, "host bridge window %pR ([%#llx-%#llx] ignored, not CPU addressable)\n",
res1, (unsigned long long)end + 1,
(unsigned long long)res1->end);
res1->end = end;
}
resource_list_for_each_entry(entry2, resources) {
res2 = entry2->res;
if (!(res2->flags & type))
continue;
/*
* I don't like throwing away windows because then
* our resources no longer match the ACPI _CRS, but
* the kernel resource tree doesn't allow overlaps.
*/
if (resource_overlaps(res1, res2)) {
res2->start = min(res1->start, res2->start);
res2->end = max(res1->end, res2->end);
dev_info(dev, "host bridge window expanded to %pR; %pR ignored\n",
res2, res1);
free = true;
goto next;
}
}
next:
resource_list_del(entry);
if (free)
resource_list_free_entry(entry);
else
resource_list_add_tail(entry, resources);
}
}
static void acpi_pci_root_remap_iospace(struct fwnode_handle *fwnode,
struct resource_entry *entry)
{
#ifdef PCI_IOBASE
struct resource *res = entry->res;
resource_size_t cpu_addr = res->start;
resource_size_t pci_addr = cpu_addr - entry->offset;
resource_size_t length = resource_size(res);
unsigned long port;
if (pci_register_io_range(fwnode, cpu_addr, length))
goto err;
port = pci_address_to_pio(cpu_addr);
if (port == (unsigned long)-1)
goto err;
res->start = port;
res->end = port + length - 1;
entry->offset = port - pci_addr;
if (pci_remap_iospace(res, cpu_addr) < 0)
goto err;
pr_info("Remapped I/O %pa to %pR\n", &cpu_addr, res);
return;
err:
res->flags |= IORESOURCE_DISABLED;
#endif
}
int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info)
{
int ret;
struct list_head *list = &info->resources;
struct acpi_device *device = info->bridge;
struct resource_entry *entry, *tmp;
unsigned long flags;
flags = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT;
ret = acpi_dev_get_resources(device, list,
acpi_dev_filter_resource_type_cb,
(void *)flags);
if (ret < 0)
dev_warn(&device->dev,
"failed to parse _CRS method, error code %d\n", ret);
else if (ret == 0)
dev_dbg(&device->dev,
"no IO and memory resources present in _CRS\n");
else {
resource_list_for_each_entry_safe(entry, tmp, list) {
if (entry->res->flags & IORESOURCE_IO)
acpi_pci_root_remap_iospace(&device->fwnode,
entry);
if (entry->res->flags & IORESOURCE_DISABLED)
resource_list_destroy_entry(entry);
else
entry->res->name = info->name;
}
acpi_pci_root_validate_resources(&device->dev, list,
IORESOURCE_MEM);
acpi_pci_root_validate_resources(&device->dev, list,
IORESOURCE_IO);
}
return ret;
}
static void pci_acpi_root_add_resources(struct acpi_pci_root_info *info)
{
struct resource_entry *entry, *tmp;
struct resource *res, *conflict, *root = NULL;
resource_list_for_each_entry_safe(entry, tmp, &info->resources) {
res = entry->res;
if (res->flags & IORESOURCE_MEM)
root = &iomem_resource;
else if (res->flags & IORESOURCE_IO)
root = &ioport_resource;
else
continue;
/*
* Some legacy x86 host bridge drivers use iomem_resource and
* ioport_resource as default resource pool, skip it.
*/
if (res == root)
continue;
conflict = insert_resource_conflict(root, res);
if (conflict) {
dev_info(&info->bridge->dev,
"ignoring host bridge window %pR (conflicts with %s %pR)\n",
res, conflict->name, conflict);
resource_list_destroy_entry(entry);
}
}
}
static void __acpi_pci_root_release_info(struct acpi_pci_root_info *info)
{
struct resource *res;
struct resource_entry *entry, *tmp;
if (!info)
return;
resource_list_for_each_entry_safe(entry, tmp, &info->resources) {
res = entry->res;
if (res->parent &&
(res->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
release_resource(res);
resource_list_destroy_entry(entry);
}
info->ops->release_info(info);
}
static void acpi_pci_root_release_info(struct pci_host_bridge *bridge)
{
struct resource *res;
struct resource_entry *entry;
resource_list_for_each_entry(entry, &bridge->windows) {
res = entry->res;
if (res->flags & IORESOURCE_IO)
pci_unmap_iospace(res);
if (res->parent &&
(res->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
release_resource(res);
}
__acpi_pci_root_release_info(bridge->release_data);
}
struct pci_bus *acpi_pci_root_create(struct acpi_pci_root *root,
struct acpi_pci_root_ops *ops,
struct acpi_pci_root_info *info,
void *sysdata)
{
int ret, busnum = root->secondary.start;
struct acpi_device *device = root->device;
int node = acpi_get_node(device->handle);
struct pci_bus *bus;
struct pci_host_bridge *host_bridge;
union acpi_object *obj;
info->root = root;
info->bridge = device;
info->ops = ops;
INIT_LIST_HEAD(&info->resources);
snprintf(info->name, sizeof(info->name), "PCI Bus %04x:%02x",
root->segment, busnum);
if (ops->init_info && ops->init_info(info))
goto out_release_info;
if (ops->prepare_resources)
ret = ops->prepare_resources(info);
else
ret = acpi_pci_probe_root_resources(info);
if (ret < 0)
goto out_release_info;
pci_acpi_root_add_resources(info);
pci_add_resource(&info->resources, &root->secondary);
bus = pci_create_root_bus(NULL, busnum, ops->pci_ops,
sysdata, &info->resources);
if (!bus)
goto out_release_info;
host_bridge = to_pci_host_bridge(bus->bridge);
if (!(root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL))
host_bridge->native_pcie_hotplug = 0;
if (!(root->osc_control_set & OSC_PCI_SHPC_NATIVE_HP_CONTROL))
host_bridge->native_shpc_hotplug = 0;
if (!(root->osc_control_set & OSC_PCI_EXPRESS_AER_CONTROL))
host_bridge->native_aer = 0;
if (!(root->osc_control_set & OSC_PCI_EXPRESS_PME_CONTROL))
host_bridge->native_pme = 0;
if (!(root->osc_control_set & OSC_PCI_EXPRESS_LTR_CONTROL))
host_bridge->native_ltr = 0;
if (!(root->osc_control_set & OSC_PCI_EXPRESS_DPC_CONTROL))
host_bridge->native_dpc = 0;
/*
* Evaluate the "PCI Boot Configuration" _DSM Function. If it
* exists and returns 0, we must preserve any PCI resource
* assignments made by firmware for this host bridge.
*/
obj = acpi_evaluate_dsm(ACPI_HANDLE(bus->bridge), &pci_acpi_dsm_guid, 1,
DSM_PCI_PRESERVE_BOOT_CONFIG, NULL);
if (obj && obj->type == ACPI_TYPE_INTEGER && obj->integer.value == 0)
host_bridge->preserve_config = 1;
ACPI_FREE(obj);
pci_scan_child_bus(bus);
pci_set_host_bridge_release(host_bridge, acpi_pci_root_release_info,
info);
if (node != NUMA_NO_NODE)
dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node);
return bus;
out_release_info:
__acpi_pci_root_release_info(info);
return NULL;
}
void __init acpi_pci_root_init(void)
{
acpi_hest_init();
if (acpi_pci_disabled)
return;
pci_acpi_crs_quirks();
acpi_scan_add_handler_with_hotplug(&pci_root_handler, "pci_root");
}
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку