808 строки
24 KiB
C
808 строки
24 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
// Copyright (C) 2019 ROHM Semiconductors
|
|
// bd71828-regulator.c ROHM BD71828GW-DS1 regulator driver
|
|
//
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/rohm-bd71828.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
|
|
struct reg_init {
|
|
unsigned int reg;
|
|
unsigned int mask;
|
|
unsigned int val;
|
|
};
|
|
struct bd71828_regulator_data {
|
|
struct regulator_desc desc;
|
|
const struct rohm_dvs_config dvs;
|
|
const struct reg_init *reg_inits;
|
|
int reg_init_amnt;
|
|
};
|
|
|
|
static const struct reg_init buck1_inits[] = {
|
|
/*
|
|
* DVS Buck voltages can be changed by register values or via GPIO.
|
|
* Use register accesses by default.
|
|
*/
|
|
{
|
|
.reg = BD71828_REG_PS_CTRL_1,
|
|
.mask = BD71828_MASK_DVS_BUCK1_CTRL,
|
|
.val = BD71828_DVS_BUCK1_CTRL_I2C,
|
|
},
|
|
};
|
|
|
|
static const struct reg_init buck2_inits[] = {
|
|
{
|
|
.reg = BD71828_REG_PS_CTRL_1,
|
|
.mask = BD71828_MASK_DVS_BUCK2_CTRL,
|
|
.val = BD71828_DVS_BUCK2_CTRL_I2C,
|
|
},
|
|
};
|
|
|
|
static const struct reg_init buck6_inits[] = {
|
|
{
|
|
.reg = BD71828_REG_PS_CTRL_1,
|
|
.mask = BD71828_MASK_DVS_BUCK6_CTRL,
|
|
.val = BD71828_DVS_BUCK6_CTRL_I2C,
|
|
},
|
|
};
|
|
|
|
static const struct reg_init buck7_inits[] = {
|
|
{
|
|
.reg = BD71828_REG_PS_CTRL_1,
|
|
.mask = BD71828_MASK_DVS_BUCK7_CTRL,
|
|
.val = BD71828_DVS_BUCK7_CTRL_I2C,
|
|
},
|
|
};
|
|
|
|
static const struct regulator_linear_range bd71828_buck1267_volts[] = {
|
|
REGULATOR_LINEAR_RANGE(500000, 0x00, 0xef, 6250),
|
|
REGULATOR_LINEAR_RANGE(2000000, 0xf0, 0xff, 0),
|
|
};
|
|
|
|
static const struct regulator_linear_range bd71828_buck3_volts[] = {
|
|
REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x0f, 50000),
|
|
REGULATOR_LINEAR_RANGE(2000000, 0x10, 0x1f, 0),
|
|
};
|
|
|
|
static const struct regulator_linear_range bd71828_buck4_volts[] = {
|
|
REGULATOR_LINEAR_RANGE(1000000, 0x00, 0x1f, 25000),
|
|
REGULATOR_LINEAR_RANGE(1800000, 0x20, 0x3f, 0),
|
|
};
|
|
|
|
static const struct regulator_linear_range bd71828_buck5_volts[] = {
|
|
REGULATOR_LINEAR_RANGE(2500000, 0x00, 0x0f, 50000),
|
|
REGULATOR_LINEAR_RANGE(3300000, 0x10, 0x1f, 0),
|
|
};
|
|
|
|
static const struct regulator_linear_range bd71828_ldo_volts[] = {
|
|
REGULATOR_LINEAR_RANGE(800000, 0x00, 0x31, 50000),
|
|
REGULATOR_LINEAR_RANGE(3300000, 0x32, 0x3f, 0),
|
|
};
|
|
|
|
static int bd71828_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
|
|
{
|
|
unsigned int val;
|
|
|
|
switch (ramp_delay) {
|
|
case 1 ... 2500:
|
|
val = 0;
|
|
break;
|
|
case 2501 ... 5000:
|
|
val = 1;
|
|
break;
|
|
case 5001 ... 10000:
|
|
val = 2;
|
|
break;
|
|
case 10001 ... 20000:
|
|
val = 3;
|
|
break;
|
|
default:
|
|
val = 3;
|
|
dev_err(&rdev->dev,
|
|
"ramp_delay: %d not supported, setting 20mV/uS",
|
|
ramp_delay);
|
|
}
|
|
|
|
/*
|
|
* On BD71828 the ramp delay level control reg is at offset +2 to
|
|
* enable reg
|
|
*/
|
|
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg + 2,
|
|
BD71828_MASK_RAMP_DELAY,
|
|
val << (ffs(BD71828_MASK_RAMP_DELAY) - 1));
|
|
}
|
|
|
|
static int buck_set_hw_dvs_levels(struct device_node *np,
|
|
const struct regulator_desc *desc,
|
|
struct regulator_config *cfg)
|
|
{
|
|
struct bd71828_regulator_data *data;
|
|
|
|
data = container_of(desc, struct bd71828_regulator_data, desc);
|
|
|
|
return rohm_regulator_set_dvs_levels(&data->dvs, np, desc, cfg->regmap);
|
|
}
|
|
|
|
static int ldo6_parse_dt(struct device_node *np,
|
|
const struct regulator_desc *desc,
|
|
struct regulator_config *cfg)
|
|
{
|
|
int ret, i;
|
|
uint32_t uv = 0;
|
|
unsigned int en;
|
|
struct regmap *regmap = cfg->regmap;
|
|
static const char * const props[] = { "rohm,dvs-run-voltage",
|
|
"rohm,dvs-idle-voltage",
|
|
"rohm,dvs-suspend-voltage",
|
|
"rohm,dvs-lpsr-voltage" };
|
|
unsigned int mask[] = { BD71828_MASK_RUN_EN, BD71828_MASK_IDLE_EN,
|
|
BD71828_MASK_SUSP_EN, BD71828_MASK_LPSR_EN };
|
|
|
|
for (i = 0; i < ARRAY_SIZE(props); i++) {
|
|
ret = of_property_read_u32(np, props[i], &uv);
|
|
if (ret) {
|
|
if (ret != -EINVAL)
|
|
return ret;
|
|
continue;
|
|
}
|
|
if (uv)
|
|
en = 0xffffffff;
|
|
else
|
|
en = 0;
|
|
|
|
ret = regmap_update_bits(regmap, desc->enable_reg, mask[i], en);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct regulator_ops bd71828_buck_ops = {
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.list_voltage = regulator_list_voltage_linear_range,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
};
|
|
|
|
static const struct regulator_ops bd71828_dvs_buck_ops = {
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.list_voltage = regulator_list_voltage_linear_range,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.set_ramp_delay = bd71828_set_ramp_delay,
|
|
};
|
|
|
|
static const struct regulator_ops bd71828_ldo_ops = {
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.list_voltage = regulator_list_voltage_linear_range,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
};
|
|
|
|
static const struct regulator_ops bd71828_ldo6_ops = {
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
};
|
|
|
|
static const struct bd71828_regulator_data bd71828_rdata[] = {
|
|
{
|
|
.desc = {
|
|
.name = "buck1",
|
|
.of_match = of_match_ptr("BUCK1"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD71828_BUCK1,
|
|
.ops = &bd71828_dvs_buck_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.linear_ranges = bd71828_buck1267_volts,
|
|
.n_linear_ranges = ARRAY_SIZE(bd71828_buck1267_volts),
|
|
.n_voltages = BD71828_BUCK1267_VOLTS,
|
|
.enable_reg = BD71828_REG_BUCK1_EN,
|
|
.enable_mask = BD71828_MASK_RUN_EN,
|
|
.vsel_reg = BD71828_REG_BUCK1_VOLT,
|
|
.vsel_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
.owner = THIS_MODULE,
|
|
.of_parse_cb = buck_set_hw_dvs_levels,
|
|
},
|
|
.dvs = {
|
|
.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
|
|
ROHM_DVS_LEVEL_SUSPEND |
|
|
ROHM_DVS_LEVEL_LPSR,
|
|
.run_reg = BD71828_REG_BUCK1_VOLT,
|
|
.run_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
.idle_reg = BD71828_REG_BUCK1_IDLE_VOLT,
|
|
.idle_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
.idle_on_mask = BD71828_MASK_IDLE_EN,
|
|
.suspend_reg = BD71828_REG_BUCK1_SUSP_VOLT,
|
|
.suspend_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
.suspend_on_mask = BD71828_MASK_SUSP_EN,
|
|
.lpsr_on_mask = BD71828_MASK_LPSR_EN,
|
|
/*
|
|
* LPSR voltage is same as SUSPEND voltage. Allow
|
|
* setting it so that regulator can be set enabled at
|
|
* LPSR state
|
|
*/
|
|
.lpsr_reg = BD71828_REG_BUCK1_SUSP_VOLT,
|
|
.lpsr_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
},
|
|
.reg_inits = buck1_inits,
|
|
.reg_init_amnt = ARRAY_SIZE(buck1_inits),
|
|
},
|
|
{
|
|
.desc = {
|
|
.name = "buck2",
|
|
.of_match = of_match_ptr("BUCK2"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD71828_BUCK2,
|
|
.ops = &bd71828_dvs_buck_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.linear_ranges = bd71828_buck1267_volts,
|
|
.n_linear_ranges = ARRAY_SIZE(bd71828_buck1267_volts),
|
|
.n_voltages = BD71828_BUCK1267_VOLTS,
|
|
.enable_reg = BD71828_REG_BUCK2_EN,
|
|
.enable_mask = BD71828_MASK_RUN_EN,
|
|
.vsel_reg = BD71828_REG_BUCK2_VOLT,
|
|
.vsel_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
.owner = THIS_MODULE,
|
|
.of_parse_cb = buck_set_hw_dvs_levels,
|
|
},
|
|
.dvs = {
|
|
.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
|
|
ROHM_DVS_LEVEL_SUSPEND |
|
|
ROHM_DVS_LEVEL_LPSR,
|
|
.run_reg = BD71828_REG_BUCK2_VOLT,
|
|
.run_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
.idle_reg = BD71828_REG_BUCK2_IDLE_VOLT,
|
|
.idle_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
.idle_on_mask = BD71828_MASK_IDLE_EN,
|
|
.suspend_reg = BD71828_REG_BUCK2_SUSP_VOLT,
|
|
.suspend_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
.suspend_on_mask = BD71828_MASK_SUSP_EN,
|
|
.lpsr_on_mask = BD71828_MASK_LPSR_EN,
|
|
.lpsr_reg = BD71828_REG_BUCK2_SUSP_VOLT,
|
|
.lpsr_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
},
|
|
.reg_inits = buck2_inits,
|
|
.reg_init_amnt = ARRAY_SIZE(buck2_inits),
|
|
},
|
|
{
|
|
.desc = {
|
|
.name = "buck3",
|
|
.of_match = of_match_ptr("BUCK3"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD71828_BUCK3,
|
|
.ops = &bd71828_buck_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.linear_ranges = bd71828_buck3_volts,
|
|
.n_linear_ranges = ARRAY_SIZE(bd71828_buck3_volts),
|
|
.n_voltages = BD71828_BUCK3_VOLTS,
|
|
.enable_reg = BD71828_REG_BUCK3_EN,
|
|
.enable_mask = BD71828_MASK_RUN_EN,
|
|
.vsel_reg = BD71828_REG_BUCK3_VOLT,
|
|
.vsel_mask = BD71828_MASK_BUCK3_VOLT,
|
|
.owner = THIS_MODULE,
|
|
.of_parse_cb = buck_set_hw_dvs_levels,
|
|
},
|
|
.dvs = {
|
|
/*
|
|
* BUCK3 only supports single voltage for all states.
|
|
* voltage can be individually enabled for each state
|
|
* though => allow setting all states to support
|
|
* enabling power rail on different states.
|
|
*/
|
|
.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
|
|
ROHM_DVS_LEVEL_SUSPEND |
|
|
ROHM_DVS_LEVEL_LPSR,
|
|
.run_reg = BD71828_REG_BUCK3_VOLT,
|
|
.idle_reg = BD71828_REG_BUCK3_VOLT,
|
|
.suspend_reg = BD71828_REG_BUCK3_VOLT,
|
|
.lpsr_reg = BD71828_REG_BUCK3_VOLT,
|
|
.run_mask = BD71828_MASK_BUCK3_VOLT,
|
|
.idle_mask = BD71828_MASK_BUCK3_VOLT,
|
|
.suspend_mask = BD71828_MASK_BUCK3_VOLT,
|
|
.lpsr_mask = BD71828_MASK_BUCK3_VOLT,
|
|
.idle_on_mask = BD71828_MASK_IDLE_EN,
|
|
.suspend_on_mask = BD71828_MASK_SUSP_EN,
|
|
.lpsr_on_mask = BD71828_MASK_LPSR_EN,
|
|
},
|
|
},
|
|
{
|
|
.desc = {
|
|
.name = "buck4",
|
|
.of_match = of_match_ptr("BUCK4"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD71828_BUCK4,
|
|
.ops = &bd71828_buck_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.linear_ranges = bd71828_buck4_volts,
|
|
.n_linear_ranges = ARRAY_SIZE(bd71828_buck4_volts),
|
|
.n_voltages = BD71828_BUCK4_VOLTS,
|
|
.enable_reg = BD71828_REG_BUCK4_EN,
|
|
.enable_mask = BD71828_MASK_RUN_EN,
|
|
.vsel_reg = BD71828_REG_BUCK4_VOLT,
|
|
.vsel_mask = BD71828_MASK_BUCK4_VOLT,
|
|
.owner = THIS_MODULE,
|
|
.of_parse_cb = buck_set_hw_dvs_levels,
|
|
},
|
|
.dvs = {
|
|
/*
|
|
* BUCK4 only supports single voltage for all states.
|
|
* voltage can be individually enabled for each state
|
|
* though => allow setting all states to support
|
|
* enabling power rail on different states.
|
|
*/
|
|
.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
|
|
ROHM_DVS_LEVEL_SUSPEND |
|
|
ROHM_DVS_LEVEL_LPSR,
|
|
.run_reg = BD71828_REG_BUCK4_VOLT,
|
|
.idle_reg = BD71828_REG_BUCK4_VOLT,
|
|
.suspend_reg = BD71828_REG_BUCK4_VOLT,
|
|
.lpsr_reg = BD71828_REG_BUCK4_VOLT,
|
|
.run_mask = BD71828_MASK_BUCK4_VOLT,
|
|
.idle_mask = BD71828_MASK_BUCK4_VOLT,
|
|
.suspend_mask = BD71828_MASK_BUCK4_VOLT,
|
|
.lpsr_mask = BD71828_MASK_BUCK4_VOLT,
|
|
.idle_on_mask = BD71828_MASK_IDLE_EN,
|
|
.suspend_on_mask = BD71828_MASK_SUSP_EN,
|
|
.lpsr_on_mask = BD71828_MASK_LPSR_EN,
|
|
},
|
|
},
|
|
{
|
|
.desc = {
|
|
.name = "buck5",
|
|
.of_match = of_match_ptr("BUCK5"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD71828_BUCK5,
|
|
.ops = &bd71828_buck_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.linear_ranges = bd71828_buck5_volts,
|
|
.n_linear_ranges = ARRAY_SIZE(bd71828_buck5_volts),
|
|
.n_voltages = BD71828_BUCK5_VOLTS,
|
|
.enable_reg = BD71828_REG_BUCK5_EN,
|
|
.enable_mask = BD71828_MASK_RUN_EN,
|
|
.vsel_reg = BD71828_REG_BUCK5_VOLT,
|
|
.vsel_mask = BD71828_MASK_BUCK5_VOLT,
|
|
.owner = THIS_MODULE,
|
|
.of_parse_cb = buck_set_hw_dvs_levels,
|
|
},
|
|
.dvs = {
|
|
/*
|
|
* BUCK5 only supports single voltage for all states.
|
|
* voltage can be individually enabled for each state
|
|
* though => allow setting all states to support
|
|
* enabling power rail on different states.
|
|
*/
|
|
.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
|
|
ROHM_DVS_LEVEL_SUSPEND |
|
|
ROHM_DVS_LEVEL_LPSR,
|
|
.run_reg = BD71828_REG_BUCK5_VOLT,
|
|
.idle_reg = BD71828_REG_BUCK5_VOLT,
|
|
.suspend_reg = BD71828_REG_BUCK5_VOLT,
|
|
.lpsr_reg = BD71828_REG_BUCK5_VOLT,
|
|
.run_mask = BD71828_MASK_BUCK5_VOLT,
|
|
.idle_mask = BD71828_MASK_BUCK5_VOLT,
|
|
.suspend_mask = BD71828_MASK_BUCK5_VOLT,
|
|
.lpsr_mask = BD71828_MASK_BUCK5_VOLT,
|
|
.idle_on_mask = BD71828_MASK_IDLE_EN,
|
|
.suspend_on_mask = BD71828_MASK_SUSP_EN,
|
|
.lpsr_on_mask = BD71828_MASK_LPSR_EN,
|
|
},
|
|
},
|
|
{
|
|
.desc = {
|
|
.name = "buck6",
|
|
.of_match = of_match_ptr("BUCK6"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD71828_BUCK6,
|
|
.ops = &bd71828_dvs_buck_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.linear_ranges = bd71828_buck1267_volts,
|
|
.n_linear_ranges = ARRAY_SIZE(bd71828_buck1267_volts),
|
|
.n_voltages = BD71828_BUCK1267_VOLTS,
|
|
.enable_reg = BD71828_REG_BUCK6_EN,
|
|
.enable_mask = BD71828_MASK_RUN_EN,
|
|
.vsel_reg = BD71828_REG_BUCK6_VOLT,
|
|
.vsel_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
.owner = THIS_MODULE,
|
|
.of_parse_cb = buck_set_hw_dvs_levels,
|
|
},
|
|
.dvs = {
|
|
.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
|
|
ROHM_DVS_LEVEL_SUSPEND |
|
|
ROHM_DVS_LEVEL_LPSR,
|
|
.run_reg = BD71828_REG_BUCK6_VOLT,
|
|
.run_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
.idle_reg = BD71828_REG_BUCK6_IDLE_VOLT,
|
|
.idle_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
.idle_on_mask = BD71828_MASK_IDLE_EN,
|
|
.suspend_reg = BD71828_REG_BUCK6_SUSP_VOLT,
|
|
.suspend_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
.suspend_on_mask = BD71828_MASK_SUSP_EN,
|
|
.lpsr_on_mask = BD71828_MASK_LPSR_EN,
|
|
.lpsr_reg = BD71828_REG_BUCK6_SUSP_VOLT,
|
|
.lpsr_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
},
|
|
.reg_inits = buck6_inits,
|
|
.reg_init_amnt = ARRAY_SIZE(buck6_inits),
|
|
},
|
|
{
|
|
.desc = {
|
|
.name = "buck7",
|
|
.of_match = of_match_ptr("BUCK7"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD71828_BUCK7,
|
|
.ops = &bd71828_dvs_buck_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.linear_ranges = bd71828_buck1267_volts,
|
|
.n_linear_ranges = ARRAY_SIZE(bd71828_buck1267_volts),
|
|
.n_voltages = BD71828_BUCK1267_VOLTS,
|
|
.enable_reg = BD71828_REG_BUCK7_EN,
|
|
.enable_mask = BD71828_MASK_RUN_EN,
|
|
.vsel_reg = BD71828_REG_BUCK7_VOLT,
|
|
.vsel_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
.owner = THIS_MODULE,
|
|
.of_parse_cb = buck_set_hw_dvs_levels,
|
|
},
|
|
.dvs = {
|
|
.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
|
|
ROHM_DVS_LEVEL_SUSPEND |
|
|
ROHM_DVS_LEVEL_LPSR,
|
|
.run_reg = BD71828_REG_BUCK7_VOLT,
|
|
.run_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
.idle_reg = BD71828_REG_BUCK7_IDLE_VOLT,
|
|
.idle_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
.idle_on_mask = BD71828_MASK_IDLE_EN,
|
|
.suspend_reg = BD71828_REG_BUCK7_SUSP_VOLT,
|
|
.suspend_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
.suspend_on_mask = BD71828_MASK_SUSP_EN,
|
|
.lpsr_on_mask = BD71828_MASK_LPSR_EN,
|
|
.lpsr_reg = BD71828_REG_BUCK7_SUSP_VOLT,
|
|
.lpsr_mask = BD71828_MASK_BUCK1267_VOLT,
|
|
},
|
|
.reg_inits = buck7_inits,
|
|
.reg_init_amnt = ARRAY_SIZE(buck7_inits),
|
|
},
|
|
{
|
|
.desc = {
|
|
.name = "ldo1",
|
|
.of_match = of_match_ptr("LDO1"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD71828_LDO1,
|
|
.ops = &bd71828_ldo_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.linear_ranges = bd71828_ldo_volts,
|
|
.n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts),
|
|
.n_voltages = BD71828_LDO_VOLTS,
|
|
.enable_reg = BD71828_REG_LDO1_EN,
|
|
.enable_mask = BD71828_MASK_RUN_EN,
|
|
.vsel_reg = BD71828_REG_LDO1_VOLT,
|
|
.vsel_mask = BD71828_MASK_LDO_VOLT,
|
|
.owner = THIS_MODULE,
|
|
.of_parse_cb = buck_set_hw_dvs_levels,
|
|
},
|
|
.dvs = {
|
|
/*
|
|
* LDO1 only supports single voltage for all states.
|
|
* voltage can be individually enabled for each state
|
|
* though => allow setting all states to support
|
|
* enabling power rail on different states.
|
|
*/
|
|
.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
|
|
ROHM_DVS_LEVEL_SUSPEND |
|
|
ROHM_DVS_LEVEL_LPSR,
|
|
.run_reg = BD71828_REG_LDO1_VOLT,
|
|
.idle_reg = BD71828_REG_LDO1_VOLT,
|
|
.suspend_reg = BD71828_REG_LDO1_VOLT,
|
|
.lpsr_reg = BD71828_REG_LDO1_VOLT,
|
|
.run_mask = BD71828_MASK_LDO_VOLT,
|
|
.idle_mask = BD71828_MASK_LDO_VOLT,
|
|
.suspend_mask = BD71828_MASK_LDO_VOLT,
|
|
.lpsr_mask = BD71828_MASK_LDO_VOLT,
|
|
.idle_on_mask = BD71828_MASK_IDLE_EN,
|
|
.suspend_on_mask = BD71828_MASK_SUSP_EN,
|
|
.lpsr_on_mask = BD71828_MASK_LPSR_EN,
|
|
},
|
|
}, {
|
|
.desc = {
|
|
.name = "ldo2",
|
|
.of_match = of_match_ptr("LDO2"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD71828_LDO2,
|
|
.ops = &bd71828_ldo_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.linear_ranges = bd71828_ldo_volts,
|
|
.n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts),
|
|
.n_voltages = BD71828_LDO_VOLTS,
|
|
.enable_reg = BD71828_REG_LDO2_EN,
|
|
.enable_mask = BD71828_MASK_RUN_EN,
|
|
.vsel_reg = BD71828_REG_LDO2_VOLT,
|
|
.vsel_mask = BD71828_MASK_LDO_VOLT,
|
|
.owner = THIS_MODULE,
|
|
.of_parse_cb = buck_set_hw_dvs_levels,
|
|
},
|
|
.dvs = {
|
|
/*
|
|
* LDO2 only supports single voltage for all states.
|
|
* voltage can be individually enabled for each state
|
|
* though => allow setting all states to support
|
|
* enabling power rail on different states.
|
|
*/
|
|
.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
|
|
ROHM_DVS_LEVEL_SUSPEND |
|
|
ROHM_DVS_LEVEL_LPSR,
|
|
.run_reg = BD71828_REG_LDO2_VOLT,
|
|
.idle_reg = BD71828_REG_LDO2_VOLT,
|
|
.suspend_reg = BD71828_REG_LDO2_VOLT,
|
|
.lpsr_reg = BD71828_REG_LDO2_VOLT,
|
|
.run_mask = BD71828_MASK_LDO_VOLT,
|
|
.idle_mask = BD71828_MASK_LDO_VOLT,
|
|
.suspend_mask = BD71828_MASK_LDO_VOLT,
|
|
.lpsr_mask = BD71828_MASK_LDO_VOLT,
|
|
.idle_on_mask = BD71828_MASK_IDLE_EN,
|
|
.suspend_on_mask = BD71828_MASK_SUSP_EN,
|
|
.lpsr_on_mask = BD71828_MASK_LPSR_EN,
|
|
},
|
|
}, {
|
|
.desc = {
|
|
.name = "ldo3",
|
|
.of_match = of_match_ptr("LDO3"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD71828_LDO3,
|
|
.ops = &bd71828_ldo_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.linear_ranges = bd71828_ldo_volts,
|
|
.n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts),
|
|
.n_voltages = BD71828_LDO_VOLTS,
|
|
.enable_reg = BD71828_REG_LDO3_EN,
|
|
.enable_mask = BD71828_MASK_RUN_EN,
|
|
.vsel_reg = BD71828_REG_LDO3_VOLT,
|
|
.vsel_mask = BD71828_MASK_LDO_VOLT,
|
|
.owner = THIS_MODULE,
|
|
.of_parse_cb = buck_set_hw_dvs_levels,
|
|
},
|
|
.dvs = {
|
|
/*
|
|
* LDO3 only supports single voltage for all states.
|
|
* voltage can be individually enabled for each state
|
|
* though => allow setting all states to support
|
|
* enabling power rail on different states.
|
|
*/
|
|
.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
|
|
ROHM_DVS_LEVEL_SUSPEND |
|
|
ROHM_DVS_LEVEL_LPSR,
|
|
.run_reg = BD71828_REG_LDO3_VOLT,
|
|
.idle_reg = BD71828_REG_LDO3_VOLT,
|
|
.suspend_reg = BD71828_REG_LDO3_VOLT,
|
|
.lpsr_reg = BD71828_REG_LDO3_VOLT,
|
|
.run_mask = BD71828_MASK_LDO_VOLT,
|
|
.idle_mask = BD71828_MASK_LDO_VOLT,
|
|
.suspend_mask = BD71828_MASK_LDO_VOLT,
|
|
.lpsr_mask = BD71828_MASK_LDO_VOLT,
|
|
.idle_on_mask = BD71828_MASK_IDLE_EN,
|
|
.suspend_on_mask = BD71828_MASK_SUSP_EN,
|
|
.lpsr_on_mask = BD71828_MASK_LPSR_EN,
|
|
},
|
|
|
|
}, {
|
|
.desc = {
|
|
.name = "ldo4",
|
|
.of_match = of_match_ptr("LDO4"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD71828_LDO4,
|
|
.ops = &bd71828_ldo_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.linear_ranges = bd71828_ldo_volts,
|
|
.n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts),
|
|
.n_voltages = BD71828_LDO_VOLTS,
|
|
.enable_reg = BD71828_REG_LDO4_EN,
|
|
.enable_mask = BD71828_MASK_RUN_EN,
|
|
.vsel_reg = BD71828_REG_LDO4_VOLT,
|
|
.vsel_mask = BD71828_MASK_LDO_VOLT,
|
|
.owner = THIS_MODULE,
|
|
.of_parse_cb = buck_set_hw_dvs_levels,
|
|
},
|
|
.dvs = {
|
|
/*
|
|
* LDO1 only supports single voltage for all states.
|
|
* voltage can be individually enabled for each state
|
|
* though => allow setting all states to support
|
|
* enabling power rail on different states.
|
|
*/
|
|
.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
|
|
ROHM_DVS_LEVEL_SUSPEND |
|
|
ROHM_DVS_LEVEL_LPSR,
|
|
.run_reg = BD71828_REG_LDO4_VOLT,
|
|
.idle_reg = BD71828_REG_LDO4_VOLT,
|
|
.suspend_reg = BD71828_REG_LDO4_VOLT,
|
|
.lpsr_reg = BD71828_REG_LDO4_VOLT,
|
|
.run_mask = BD71828_MASK_LDO_VOLT,
|
|
.idle_mask = BD71828_MASK_LDO_VOLT,
|
|
.suspend_mask = BD71828_MASK_LDO_VOLT,
|
|
.lpsr_mask = BD71828_MASK_LDO_VOLT,
|
|
.idle_on_mask = BD71828_MASK_IDLE_EN,
|
|
.suspend_on_mask = BD71828_MASK_SUSP_EN,
|
|
.lpsr_on_mask = BD71828_MASK_LPSR_EN,
|
|
},
|
|
}, {
|
|
.desc = {
|
|
.name = "ldo5",
|
|
.of_match = of_match_ptr("LDO5"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD71828_LDO5,
|
|
.ops = &bd71828_ldo_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.linear_ranges = bd71828_ldo_volts,
|
|
.n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts),
|
|
.n_voltages = BD71828_LDO_VOLTS,
|
|
.enable_reg = BD71828_REG_LDO5_EN,
|
|
.enable_mask = BD71828_MASK_RUN_EN,
|
|
.vsel_reg = BD71828_REG_LDO5_VOLT,
|
|
.vsel_mask = BD71828_MASK_LDO_VOLT,
|
|
.of_parse_cb = buck_set_hw_dvs_levels,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
/*
|
|
* LDO5 is special. It can choose vsel settings to be configured
|
|
* from 2 different registers (by GPIO).
|
|
*
|
|
* This driver supports only configuration where
|
|
* BD71828_REG_LDO5_VOLT_L is used.
|
|
*/
|
|
.dvs = {
|
|
.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
|
|
ROHM_DVS_LEVEL_SUSPEND |
|
|
ROHM_DVS_LEVEL_LPSR,
|
|
.run_reg = BD71828_REG_LDO5_VOLT,
|
|
.idle_reg = BD71828_REG_LDO5_VOLT,
|
|
.suspend_reg = BD71828_REG_LDO5_VOLT,
|
|
.lpsr_reg = BD71828_REG_LDO5_VOLT,
|
|
.run_mask = BD71828_MASK_LDO_VOLT,
|
|
.idle_mask = BD71828_MASK_LDO_VOLT,
|
|
.suspend_mask = BD71828_MASK_LDO_VOLT,
|
|
.lpsr_mask = BD71828_MASK_LDO_VOLT,
|
|
.idle_on_mask = BD71828_MASK_IDLE_EN,
|
|
.suspend_on_mask = BD71828_MASK_SUSP_EN,
|
|
.lpsr_on_mask = BD71828_MASK_LPSR_EN,
|
|
},
|
|
|
|
}, {
|
|
.desc = {
|
|
.name = "ldo6",
|
|
.of_match = of_match_ptr("LDO6"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD71828_LDO6,
|
|
.ops = &bd71828_ldo6_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.fixed_uV = BD71828_LDO_6_VOLTAGE,
|
|
.n_voltages = 1,
|
|
.enable_reg = BD71828_REG_LDO6_EN,
|
|
.enable_mask = BD71828_MASK_RUN_EN,
|
|
.owner = THIS_MODULE,
|
|
/*
|
|
* LDO6 only supports enable/disable for all states.
|
|
* Voltage for LDO6 is fixed.
|
|
*/
|
|
.of_parse_cb = ldo6_parse_dt,
|
|
},
|
|
}, {
|
|
.desc = {
|
|
/* SNVS LDO in data-sheet */
|
|
.name = "ldo7",
|
|
.of_match = of_match_ptr("LDO7"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD71828_LDO_SNVS,
|
|
.ops = &bd71828_ldo_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.linear_ranges = bd71828_ldo_volts,
|
|
.n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts),
|
|
.n_voltages = BD71828_LDO_VOLTS,
|
|
.enable_reg = BD71828_REG_LDO7_EN,
|
|
.enable_mask = BD71828_MASK_RUN_EN,
|
|
.vsel_reg = BD71828_REG_LDO7_VOLT,
|
|
.vsel_mask = BD71828_MASK_LDO_VOLT,
|
|
.owner = THIS_MODULE,
|
|
.of_parse_cb = buck_set_hw_dvs_levels,
|
|
},
|
|
.dvs = {
|
|
/*
|
|
* LDO7 only supports single voltage for all states.
|
|
* voltage can be individually enabled for each state
|
|
* though => allow setting all states to support
|
|
* enabling power rail on different states.
|
|
*/
|
|
.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
|
|
ROHM_DVS_LEVEL_SUSPEND |
|
|
ROHM_DVS_LEVEL_LPSR,
|
|
.run_reg = BD71828_REG_LDO7_VOLT,
|
|
.idle_reg = BD71828_REG_LDO7_VOLT,
|
|
.suspend_reg = BD71828_REG_LDO7_VOLT,
|
|
.lpsr_reg = BD71828_REG_LDO7_VOLT,
|
|
.run_mask = BD71828_MASK_LDO_VOLT,
|
|
.idle_mask = BD71828_MASK_LDO_VOLT,
|
|
.suspend_mask = BD71828_MASK_LDO_VOLT,
|
|
.lpsr_mask = BD71828_MASK_LDO_VOLT,
|
|
.idle_on_mask = BD71828_MASK_IDLE_EN,
|
|
.suspend_on_mask = BD71828_MASK_SUSP_EN,
|
|
.lpsr_on_mask = BD71828_MASK_LPSR_EN,
|
|
},
|
|
|
|
},
|
|
};
|
|
|
|
static int bd71828_probe(struct platform_device *pdev)
|
|
{
|
|
struct rohm_regmap_dev *bd71828;
|
|
int i, j, ret;
|
|
struct regulator_config config = {
|
|
.dev = pdev->dev.parent,
|
|
};
|
|
|
|
bd71828 = dev_get_drvdata(pdev->dev.parent);
|
|
if (!bd71828) {
|
|
dev_err(&pdev->dev, "No MFD driver data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
config.regmap = bd71828->regmap;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bd71828_rdata); i++) {
|
|
struct regulator_dev *rdev;
|
|
const struct bd71828_regulator_data *rd;
|
|
|
|
rd = &bd71828_rdata[i];
|
|
rdev = devm_regulator_register(&pdev->dev,
|
|
&rd->desc, &config);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(&pdev->dev,
|
|
"failed to register %s regulator\n",
|
|
rd->desc.name);
|
|
return PTR_ERR(rdev);
|
|
}
|
|
for (j = 0; j < rd->reg_init_amnt; j++) {
|
|
ret = regmap_update_bits(bd71828->regmap,
|
|
rd->reg_inits[j].reg,
|
|
rd->reg_inits[j].mask,
|
|
rd->reg_inits[j].val);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"regulator %s init failed\n",
|
|
rd->desc.name);
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver bd71828_regulator = {
|
|
.driver = {
|
|
.name = "bd71828-pmic"
|
|
},
|
|
.probe = bd71828_probe,
|
|
};
|
|
|
|
module_platform_driver(bd71828_regulator);
|
|
|
|
MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
|
|
MODULE_DESCRIPTION("BD71828 voltage regulator driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:bd71828-pmic");
|