Move some of the optional parameters of CreateRWLayer() in a struct
called CreateRWLayerOpts. This will make it easy to add more options
arguments without having to change signature of CreateRWLayer().
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Translate pull errors to provide a more consistent and user friendly
error message.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Remove the following comment in pullV2Tag:
// NOTE: not using TagService.Get, since it uses HEAD requests
// against the manifests endpoint, which are not supported by
// all registry versions.
This is actually not an issue, because TagService.Get does a fallback to
GET if HEAD fails. It has done this ever since TagService was added to
the distribution API, so this comment was probably based on an early
version of TagService before it was merged, or was always a
misunderstanding.
However, we continue to use ManifestService.Get instead because it
saves a round trip. The manifest can be retrieved directly instead of
resolving the digest first.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Allow built images to be squash to scratch.
Squashing does not destroy any images or layers, and preserves the
build cache.
Introduce a new CLI argument --squash to docker build
Introduce a new param to the build API endpoint `squash`
Once the build is complete, docker creates a new image loading the diffs
from each layer into a single new layer and references all the parent's
layers.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Classify blobs into three categories based on size.
Use a very limited number of mount attempts and no existence check for
small blobs. Use more attempts for bigger blobs.
Also remember blob associations during layer existence check.
Blob digests are now checked in the target repository from newest to
latest. If the blob exists and the metadata entry does not, it will be
created. If the blob is not found, the metadata entry will be removed.
Signed-off-by: Michal Minář <miminar@redhat.com>
Don't fallback back immediately to blob upload if the cross-repo mount
fails and layer upload is initiated by registry.
Instead cancel the upload and re-try cross-repo mount from different
source repository before doing full re-upload.
Signed-off-by: Michal Minář <miminar@redhat.com>
to avoid unnecessary blob re-uploads.
Cross repository mount from particular repo will most probably fail if
the user pushing to the registry is not the same as the one who pulled
or pushed to the source repo.
This PR attempts first to cross-repo mount from the source repositories
associated with the pusher's auth config. Then it falls back to other
repositories sorted from the most similar to the target repo to the
least.
It also prevents metadata deletion in cases where cross-repo mount fails
and the auth config hashes differ.
Signed-off-by: Michal Minář <miminar@redhat.com>
Windows base layers are no longer the special "layers+base" type, so we can remove all the special handling for that.
Signed-off-by: Stefan J. Wernli <swernli@microsoft.com>
Ensure that cancellation of a pull propagates rather than continuing to
container creation. This ensures that the `Prepare` method is properly
re-entrant.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This fixes the hard coded restriction for non-linux platforms to v2 registries. Previously, the check was above the flag parsing, which would overwrite the hard coded value and prevent correct operation. This change also removes the related daemon flag from Windows to avoid confusion, as it has no meaning when the value is going to always be hard coded to true.
Signed-off-by: Stefan J. Wernli <swernli@microsoft.com>
Updates the v1 search endpoint to also support v2 auth when an identity token is given.
Only search v1 endpoint is supported since there is not v2 search currently defined to replace it.
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
If the remote registry responds with a NAME_UNKNOWN error, treat this as
a fatal error and don't retry the push.
Tested against an ECR registry.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Always attempt to add digest even when tag already exists.
Ensure digest does not currently exist.
When image id is mismatched, output an error log.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Layer uploads are deduplicated by a "key" made up of the layer DiffID
and the repository name. The repository name being used to form this key
was a remote version of the name that didn't include the name of the
registry. Consequently, pushes of the same layer in a repository with
the same remote name to different registries would wrongly be
deduplicated.
Correct the key by using the full name of the repository, which includes
the registry hostname as well as the image's name.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This patch introduces a new experimental engine-level plugin management
with a new API and command line. Plugins can be distributed via a Docker
registry, and their lifecycle is managed by the engine.
This makes plugins a first-class construct.
For more background, have a look at issue #20363.
Documentation is in a separate commit. If you want to understand how the
new plugin system works, you can start by reading the documentation.
Note: backwards compatibility with existing plugins is maintained,
albeit they won't benefit from the advantages of the new system.
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
This fix tries to fix logrus formatting by removing `f` from
`logrus.[Error|Warn|Debug|Fatal|Panic|Info]f` when formatting string
is not present.
This fix fixes#23459.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
… and refactor a little bit some daemon on the way.
- Move `SearchRegistryForImages` to a new file (`daemon/search.go`) as
`daemon.go` is getting pretty big.
- `registry.Service` is now an interface (allowing us to decouple it a
little bit and thus unit test easily).
- Add some unit test for `SearchRegistryForImages`.
- Use UniqueExactMatch for search filters
- And use empty restore id for now in client.ContainerStart.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This fix tries to address issues raised in #20936 and #22443
where `docker pull` or `docker push` fails because of the
concurrent connection failing.
Currently, the number of maximum concurrent connections is
controlled by `maxDownloadConcurrency` and `maxUploadConcurrency`
which are hardcoded to 3 and 5 respectively. Therefore, in
situations where network connections don't support multiple
downloads/uploads, failures may encounter for `docker push`
or `docker pull`.
This fix tries changes `maxDownloadConcurrency` and
`maxUploadConcurrency` to adjustable by passing
`--max-concurrent-uploads` and `--max-concurrent-downloads` to
`docker daemon` command.
The documentation related to docker daemon has been updated.
Additional test case have been added to cover the changes in this fix.
This fix fixes#20936. This fix fixes#22443.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Use sockets.DialerFromEnvironment, as is done in other places,
to transparently support SOCKS proxy config from ALL_PROXY
environment variable.
Requires the *engine* have the ALL_PROXY env var set, which
doesn't seem ideal. Maybe it should be a CLI option somehow?
Only tested with push and a v2 registry so far. I'm happy to look
further into testing more broadly, but I wanted to get feedback on
the general idea first.
Signed-off-by: Brett Higgins <brhiggins@arbor.net>
@nwt noticed that the media type specified in the config section of a
schema2 manifest is application/octet-stream, instead of the correct
value application/vnd.docker.container.image.v1+json.
This brings in https://github.com/docker/distribution/pull/1622 to fix
this.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Now that we are checking if the image and host have the same architectures
via #21272, this value should be null so that the test passes on non-x86
machines
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
Previously, Windows only supported running with a OS-managed base image.
With this change, Windows supports normal, Linux-like layered images, too.
Signed-off-by: John Starks <jostarks@microsoft.com>
These fields are needed to specify the exact version of Windows that an
image can run on. They may be useful for other platforms in the future.
This also changes image.store.Create to validate that the loaded image is
supported on the current machine. This change affects Linux as well, since
it now validates the architecture and OS fields.
Signed-off-by: John Starks <jostarks@microsoft.com>
The prior error message caused confusion. If a user attempts to push an
image up to a registry, but they misspelled (or forgot to properly tag
their image) they would see the message 'Repository does not exist', which
is not very clear and causes some to think that there might be a problem
with the registry or connectivity to it, when the problem was simply just
that an image with that tag specified does not exist locally.
Signed-off-by: Dave MacDonald <mindlapse@gmail.com>
Close could be called twice on a temporary download file, which could
have bad side effects.
This fixes the problem by setting to ld.tmpFile to nil when the download
completes sucessfully. Then the call to ld.Close will have no effect,
and only the download manager will close the temporary file when it's
done extracting the layer from it. ld.Close will be responsible for
closing the file if we hit the retry limit and there is still a partial
download present.
Fixes#21675
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Fix unmount issues in the daemon crash and restart lifecycle, w.r.t
graph drivers. This change sets a live container RWLayer's activity
count to 1, so that the RWLayer is aware of the mount. Note that
containerd has experimental support for restore live containers.
Added/updated corresponding tests.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
The current error message is "Error: image [name] not found". This makes
sense from the perspective of the v1 pull, since we found the repository
doesn't exist over the v1 protocol. However, in the vast majority of
cases, this error will be produced by fallback situations, where we
first try to pull the tag with the v2 protocol, and then fall back the
v1 protocol, which probably isn't even supported by the server.
Including the tag in the error message makes a lot more sense since the
actual repository may exist on v2, but not the tag.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This adds support for the passthrough on build, push, login, and search.
Revamp the integration test to cover these cases and make it more
robust.
Use backticks instead of quoted strings for backslash-heavy string
contstands.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Changes how the Engine interacts with Registry servers on image pull.
Previously, Engine sent a User-Agent string to the Registry server
that included only the Engine's version information. This commit
appends to that string the fields from the User-Agent sent by the
client (e.g., Compose) of the Engine. This allows Registry server
operators to understand what tools are actually generating pulls on
their registries.
Signed-off-by: Mike Goelzer <mgoelzer@docker.com>
- cherry-pick from 1.10.3 branch: 0186f4d4223a094a050d06f456355da3ae431468
- add token service test suite
- add integration test (missing in 1.10.3 branch)
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
This test was checking that it received every progress update that was
produced. But delivery of these intermediate progress updates is not
guaranteed. A new update can overwrite the previous one if the previous
one hasn't been sent to the channel yet.
The call to t.Fatalf exited the current goroutine which was consuming
the channel, which caused a deadlock and eventual test timeout rather
than a proper failure message.
Failure seen here:
https://jenkins.dockerproject.org/job/Docker-PRs-experimental/16400/console
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
The download manager assumed there was at least one layer involved in
all images. This can be false if the image is essentially a copy of
`scratch`.
Fix a nil pointer dereference that happened in this case. Add
integration tests that involve schema1 and schema2 manifests.
Fixes#21213
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Use token handler options for initialization.
Update auth endpoint to set identity token in response.
Update credential store to match distribution interface changes.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Further differentiate the APIEndpoint used with V2 with the endpoint type which is only used for v1 registry interactions
Rename Endpoint to V1Endpoint and remove version ambiguity
Use distribution token handler for login
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Concurrent uploads which share layers worked correctly as of #18353,
but unfortunately #18785 caused a regression. This PR removed the logic
that shares digests between different push sessions. This overlooked the
case where one session was waiting for another session to upload a
layer.
This commit adds back the ability to propagate this digest information,
using the distribution.Descriptor type because this is what is received
from stats and uploads, and also what is ultimately needed for building
the manifest.
Surprisingly, there was no test covering this case. This commit adds
one. It fails without the fix.
See recent comments on #9132.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Attempt layer mounts from up to 3 source repositories, possibly
falling back to a standard blob upload for cross repository pushes.
Addresses compatiblity issues with token servers which do not grant
multiple repository scopes, resulting in an authentication failure for
layer mounts, which would otherwise cause the push to terminate with an
error.
Signed-off-by: Brian Bland <brian.bland@docker.com>
This allows easier URL handling in code that uses APIEndpoint.
If we continued to store the URL unparsed, it would require redundant
parsing whenver we want to extract information from it. Also, parsing
the URL earlier should give improve validation.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
With the --insecure-registry daemon option (or talking to a registry on
a local IP), the daemon will first try TLS, and then try plaintext if
something goes wrong with the push or pull. It doesn't make sense to try
plaintext if a HTTP request went through while using TLS. This commit
changes the logic to keep track of host/port combinations where a TLS
attempt managed to do at least one HTTP request (whether the response
code indicated success or not). If the host/port responded to a HTTP
using TLS, we won't try to make plaintext HTTP requests to it.
This will result in better error messages, which sometimes ended up
showing the result of the plaintext attempt, like this:
Error response from daemon: Get
http://myregistrydomain.com:5000/v2/: malformed HTTP response
"\x15\x03\x01\x00\x02\x02"
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Several improvements to error handling:
- Introduce ImageConfigPullError type, wrapping errors related to
downloading the image configuration blob in schema2. This allows for a
more descriptive error message to be seen by the end user.
- Change some logrus.Debugf calls that display errors to logrus.Errorf.
Add log lines in the push/pull fallback cases to make sure the errors
leading to the fallback are shown.
- Move error-related types and functions which are only used by the
distribution package out of the registry package.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Derek McGowan
Vivek Goyal
Victor Vieux
Aaron Lehmann
Brian Goff
Sebastiaan van Stijn
Kenfe-Mickael Laventure
Michal Minář
John Starks
YuPengZTE
Tonis Tiigi
John Howard
Michael Crosby
Qiang Huang
Anusha Ragunathan
Alexander Morozov
John Howard
Stefan J. Wernli
Stephen J Day
Tibor Vass
Yong Tang
Antonio Murdaca
Arnaud Porterie
allencloud
Vincent Demeester
Antonio Murdaca
Brett Higgins
Christopher Jones
Alexander Morozov
Dave MacDonald
Shishir Mahajan
Mike Goelzer
Phil Estes
Jay
Tibor Vass
Brian Bland
David Calavera