The btrfs driver attempts to stat the /var/lib/docker directory to
ensure it exists. If it doesn't exist then it bails with an unhelpful
log line:
```
2014/05/10 00:51:30 no such file or directory
```
In 0.10 the directory was created but quickly digging through the logs I
can't tell what sort of re-ordering of code caused this regression.
Docker-DCO-1.1-Signed-off-by: Brandon Philips <brandon.philips@coreos.com> (github: philips)
For now this means the btrfs backend is skipped when run
inside make test. You can however run it manually if you want.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
If a graphdriver fails initialization due to ErrNotSupported we ignore
that and keep trying the next. But if some driver has a different
error (for instance if you specified an unknown option for it) we fail
the daemon startup, printing the error, rather than falling back to an
unexected driver (typically vfs) which may not match what you have run
earlier.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This adds daemon/graphdriver/graphtest/graphtest which has a few
generic tests for all graph drivers, and then uses these
from the btrs, devicemapper and vfs backends.
I've not yet added the aufs backend, because i can't test that here
atm. It should work though.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Currently the tests that mocks or denies functions leave this state
around for the next test. This is no good if we want to actually
test the devicemapper code in later tests.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This moves the Attach method from the container to the daemon. This
method mostly supports the http attach logic and does not have anything
to do with the running of a container.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
This updates systemd.Apply to match the fs backend by:
* Always join blockio controller (for stats)
* Support CpusetCpus
* Support MemorySwap
Also, it removes the generic UnitProperties in favour of a single
option to set the slice.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Also make sure we copy the joining containers hosts and resolv.conf with
the hostname if we are joining it's network stack.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
This is required to address a race condition described in #5553,
where a container can be partially deleted -- for example, the
root filesystem but not the init filesystem -- which makes
it impossible to delete the container without re-adding the
missing filesystems manually.
This behavior has been witnessed when rebooting boxes that
are configured to remove containers on shutdown in parallel
with stopping the Docker daemon.
Docker-DCO-1.1-Signed-off-by: Gabriel Monroy <gabriel@opdemand.com> (github: gabrtv)
We don't have the flexibility to do extra things with lxc because it is
a black box and most fo the magic happens before we get a chance to
interact with it in dockerinit.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
This also cleans up some of the left over restriction paths code from
before.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
It has been pointed out that some files in /proc and /sys can be used
to break out of containers. However, if those filesystems are mounted
read-only, most of the known exploits are mitigated, since they rely
on writing some file in those filesystems.
This does not replace security modules (like SELinux or AppArmor), it
is just another layer of security. Likewise, it doesn't mean that the
other mitigations (shadowing parts of /proc or /sys with bind mounts)
are useless. Those measures are still useful. As such, the shadowing
of /proc/kcore is still enabled with both LXC and native drivers.
Special care has to be taken with /proc/1/attr, which still needs to
be mounted read-write in order to enable the AppArmor profile. It is
bind-mounted from a private read-write mount of procfs.
All that enforcement is done in dockerinit. The code doing the real
work is in libcontainer. The init function for the LXC driver calls
the function from libcontainer to avoid code duplication.
Docker-DCO-1.1-Signed-off-by: Jérôme Petazzoni <jerome@docker.com> (github: jpetazzo)
Kernel capabilities for privileged syslog operations are currently splitted into
CAP_SYS_ADMIN and CAP_SYSLOG since the following commit:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ce6ada35bdf710d16582cc4869c26722547e6f11
This patch drops CAP_SYSLOG to prevent containers from messing with
host's syslog (e.g. `dmesg -c` clears up host's printk ring buffer).
Closes#5491
Docker-DCO-1.1-Signed-off-by: Eiichi Tsukata <devel@etsukata.com> (github: Etsukata)
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
This duplicates some of the Exec code but I think it it worth it because
the native driver is more straight forward and does not have the
complexity have handling the type issues for now.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
This temp. expands the Exec method's signature but adds a more robust
way to know when the container's process is actually released and begins
to run. The network interfaces are not guaranteed to be up yet but this
provides a more accurate view with a single callback at this time.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Without this patch, containers inherit the open file descriptors of the daemon, so my "exec 42>&2" allows us to "echo >&42 some nasty error with some bad advice" directly into the daemon log. :)
Also, "hack/dind" was already doing this due to issues caused by the inheritance, so I'm removing that hack too since this patch obsoletes it by generalizing it for all containers.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
Added --selinux-enable switch to daemon to enable SELinux labeling.
The daemon will now generate a new unique random SELinux label when a
container starts, and remove it when the container is removed. The MCS
labels will be stored in the daemon memory. The labels of containers will
be stored in the container.json file.
When the daemon restarts on boot or if done by an admin, it will read all containers json files and reserve the MCS labels.
A potential problem would be conflicts if you setup thousands of containers,
current scheme would handle ~500,000 containers.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: crosbymichael)
This has every container using the docker daemon's pid for the processes
label so it does not work correctly.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
This allows multiple instances of the backend in different containers
to access devices (although generally only one can modify/create them).
Any old metadata is converted on the first run.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Instead of globally keeping track of the free device ids we just
start from 0 each run and handle EEXIST error and try the next one.
This way we don't need any global state for the device ids, which
means we can read device metadata lazily. This is important for
multi-process use of the backend.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This moves the EBUSY detection to devmapper.go, and then returns
a real ErrBusy that deviceset uses.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This will allow for these to be set independently. Keep the current Docker behavior where Memory and MemoryReservation are set to the value of Memory.
Docker-DCO-1.1-Signed-off-by: Victor Marmol <vmarmol@google.com> (github: vmarmol)
container.Kill() might read a pid of 0 from
container.State.Pid due to losing a race with
container.monitor() calling
container.State.SetStopped(). Sending a SIGKILL to
pid 0 is undesirable as "If pid equals 0, then sig
is sent to every process in the process group of
the calling process."
Docker-DCO-1.1-Signed-off-by: Daniel Norberg <daniel.norberg@gmail.com> (github: danielnorberg)
We used to mount in Create() to be able to create a few files that
needs to be in each device. However, this mount is problematic for
selinux, as we need to set the mount label at mount-time, and it
is not known at the time of Create().
This change just moves the file creation to first Get() call and
drops the mount from Create(). Additionally, this lets us remove
some complexities we had to avoid an extra unmount+mount cycle.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
container.Register() checks both IsRunning() and IsGhost(), but at
this point IsGhost() is always true if IsRunning() is true. For a
newly created container both are false, and for a restored-from-disk
container Daemon.load() sets Ghost to true if IsRunning is true. So we
just drop the IsGhost check.
This was the last call to IsGhost, so we remove It and all other
traces of the ghost state.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Michael Crosby
Fernando
Brandon Philips
Alexander Larsson
Alexander Larsson
Michael Crosby
Bryan Murphy
Victor Vieux
Victor Vieux
Guillaume J. Charmes
Johan Euphrosine
Guillaume J. Charmes
Gabriel Monroy
Jérôme Petazzoni
Eiichi Tsukata
Alexandr Morozov
Tibor Vass
Tianon Gravi
Dan Walsh
Brian Goff
unclejack
Victor Marmol
Daniel Norberg