daemon cache was getting the whole image map and then iterating through
it to find children. This information is already stored in the image
store.
Prior to this change building the docker repo with a full cache took 30
seconds.
After it takes between 15 seconds or less (As low as 9 seconds).
This is an improvement on docker 1.9.1 which hovered around 17 seconds.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
During daemon startup, all containers are registered before any are
started.
During container registration it was calling out to initialize volumes.
If the volume uses a plugin that is running in a container, this will
cause the restart of that container to fail since the plugin is not yet
running.
This also slowed down daemon startup since volume initialization was
happening sequentially, which can be slow (and is flat out slow since
initialization would fail but take 8 seconds for each volume to do it).
This fix holds off on volume initialization until after containers are
restarted and does the initialization in parallel.
The containers that are restarted will have thier volumes initialized
because they are being started. If any of these containers are using a
plugin they will just keep retrying to reach the plugin (up to the
timeout, which is 8seconds) until the container with the plugin is up
and running.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Read configuration after flags making this the priority:
1- Apply configuration from file.
2- Apply configuration from flags.
Reload configuration when a signal is received, USR2 in Linux:
- Reload router if the debug configuration changes.
- Reload daemon labels.
- Reload cluster discovery.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Before #16032, once links were setup
in the sqlite db, hostConfig.Links was cleared out.
This means that we need to migrate data back out of the sqlite db and
put it back into hostConfig.Links so that links specified on older
daemons can be used.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Don't rely on sqlite db for name registration and linking.
Instead register names and links when the daemon starts to an in-memory
store.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Makes `docker volume ls` and `docker volume inspect` ask the volume
drivers rather than only using what is cached locally.
Previously in order to use a volume from an external driver, one would
either have to use `docker volume create` or have a container that is
already using that volume for it to be visible to the other volume
API's.
For keeping uniqueness of volume names in the daemon, names are bound to
a driver on a first come first serve basis. If two drivers have a volume
with the same name, the first one is chosen, and a warning is logged
about the second one.
Adds 2 new methods to the plugin API, `List` and `Get`.
If a plugin does not implement these endpoints, a user will not be able
to find the specified volumes as well requests go through the drivers.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Merge was used by builder and daemon. With this commit, the builder
call has been inlined and the function moved to the daemon package,
which is the only other caller.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
- Stop serializing JSONMessage in favor of events.Message.
- Keep backwards compatibility with JSONMessage for container events.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Support restoreCustomImage for windows with a new interface to extract
the graph driver from the LayerStore.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
This provides a best effort on daemon restarts to restart containers
which have linked containers that are not up yet instead of failing.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
When a container is created it is registered before the mount is created. This can lead to mount does not exist errors when inspecting between create and mount.
Fixes#18753
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
RWLayer will now have more operations and be protected through a referenced type rather than always looked up by string in the layer store.
Separates creation of RWLayer (write capture layer) from mounting of the layer.
This allows mount labels to be applied after creation and allowing RWLayer objects to have the same lifespan as a container without performance regressions from requiring mount.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
- Make the API client library completely standalone.
- Move windows partition isolation detection to the client, so the
driver doesn't use external types.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This is a very docker concept that nobody elses need.
We only maintain it to keep the API backwards compatible.
Signed-off-by: David Calavera <david.calavera@gmail.com>
These filters are only use to interchange data between clients and daemons.
They don't belong to the parsers package.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This commit adds a transfer manager which deduplicates and schedules
transfers, and also an upload manager and download manager that build on
top of the transfer manager to provide high-level interfaces for uploads
and downloads. The push and pull code is modified to use these building
blocks.
Some benefits of the changes:
- Simplification of push/pull code
- Pushes can upload layers concurrently
- Failed downloads and uploads are retried after backoff delays
- Cancellation is supported, but individual transfers will only be
cancelled if all pushes or pulls using them are cancelled.
- The distribution code is decoupled from Docker Engine packages and API
conventions (i.e. streamformatter), which will make it easier to split
out.
This commit also includes unit tests for the new distribution/xfer
package. The tests cover 87.8% of the statements in the package.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
So other packages don't need to import the daemon package when they
want to use this struct.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Tibor Vass <tibor@docker.com>
A TopicFunc is an interface to let the pubisher decide whether it needs
to send a message to a subscriber or not. It returns true if the
publisher must send the message and false otherwise.
Users of the pubsub package can create a subscriber with a topic
function by calling `pubsub.SubscribeTopic`.
Message delivery has also been modified to use concurrent channels per
subscriber. That way, topic verification and message delivery is not
o(N+M) anymore, based on the number of subscribers and topic verification
complexity.
Using pubsub topics, the API stops controlling the message delivery,
delegating that function to a topic generated with the filtering
provided by the user. The publisher sends every message to the
subscriber if there is no filter, but the api doesn't have to select
messages to return anymore.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Improves the current filtering implementation complixity.
Currently, the best case is O(N) and worst case O(N^2) for key-value filtering.
In the new implementation, the best case is O(1) and worst case O(N), again for key-value filtering.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Closes#9798
@maintainers please note that this is a change to the UX. We no longer
require the -f flag on `docker tag` to move a tag from an existing image.
However, this does make us more consistent across our commands,
see https://github.com/docker/docker/issues/9798 for the history.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Add distribution package for managing pulls and pushes. This is based on
the old code in the graph package, with major changes to work with the
new image/layer model.
Add v1 migration code.
Update registry, api/*, and daemon packages to use the reference
package's types where applicable.
Update daemon package to use image/layer/tag stores instead of the graph
package
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Remove double reference between containers and exec configurations by
keeping only the container id.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This is a small configuration struct used in two scenarios:
1. To attach I/O pipes to a running containers.
2. To attach to execution processes inside running containers.
Although they are similar, keeping the struct in the same package
than exec and container can generate cycled dependencies if we
move any of them outside the daemon, like we want to do
with the container.
Signed-off-by: David Calavera <david.calavera@gmail.com>
By removing deprecated volume structures, now that windows mount volumes we don't need a initializer per platform.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This change will allow us to run SELinux in a container with
BTRFS back end. We continue to work on fixing the kernel/BTRFS
but this change will allow SELinux Security separation on BTRFS.
It basically relabels the content on container creation.
Just relabling -init directory in BTRFS use case. Everything looks like it
works. I don't believe tar/achive stores the SELinux labels, so we are good
as far as docker commit.
Tested Speed on startup with BTRFS on top of loopback directory. BTRFS
not on loopback should get even better perfomance on startup time. The
more inodes inside of the container image will increase the relabel time.
This patch will give people who care more about security the option of
runnin BTRFS with SELinux. Those who don't want to take the slow down
can disable SELinux either in individual containers or for all containers
by continuing to disable SELinux in the daemon.
Without relabel:
> time docker run --security-opt label:disable fedora echo test
test
real 0m0.918s
user 0m0.009s
sys 0m0.026s
With Relabel
test
real 0m1.942s
user 0m0.007s
sys 0m0.030s
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
The LXC driver was deprecated in Docker 1.8.
Following the deprecation rules, we can remove a deprecated feature
after two major releases. LXC won't be supported anymore starting on Docker 1.10.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Side effects:
- Decouple daemon and container to start containers.
- Decouple daemon and container to copy files.
Signed-off-by: David Calavera <david.calavera@gmail.com>
And do not try to unmount empty paths.
Because nobody should be woken up in the middle of the night for them.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Instead of using `MNT_DETACH` to unmount the container's mqueue/shm
mounts, force it... but only on daemon init and shutdown.
This makes sure that these IPC mounts are cleaned up even when the
daemon is killed.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
--cluster-advertise daemon option is enahanced to support <interface-name>
in addition to <ip-address> in order to amke it automation friendly using
docker-machine.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
- Only user named containers will be published into
other containers' etc/hosts file.
- Also block linking to containers which are not
connected to the default network
Signed-off-by: Alessandro Boch <aboch@docker.com>
While creating multiple containers the second
container could remove the first one from graph
and not produce an error.
Fixes#15995
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Delegate validation tasks to the volume drivers. It's up to them
to decide whether a name is valid or not.
Restrict volume names for the local driver to prevent creating
mount points outside docker's volumes directory.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Lookup the graph parent reference to detect a builder cache miss before
looping the whole graph image index to build a parent-children tree.
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
This is useful for cluster systems such as swarm to sync the image
state when new images are successfully built.
Signed-off-by: Shijiang Wei <mountkin@gmail.com>
Adds support for the daemon to handle user namespace maps as a
per-daemon setting.
Support for handling uid/gid mapping is added to the builder,
archive/unarchive packages and functions, all graphdrivers (except
Windows), and the test suite is updated to handle user namespace daemon
rootgraph changes.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
- add daemon methods Authenticate & SearchRegistryForImages
- use new methods instead of directly accessing RegistryService
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
- use daemon member directly rather than through a function call
- create GetImage method for use external to deamon
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
This leverages recent additions to libkv enabling client
authentication via TLS so the discovery back-end can be locked
down with mutual TLS. Example usage:
docker daemon [other args] \
--cluster-advertise 192.168.122.168:2376 \
--cluster-store etcd://192.168.122.168:2379 \
--cluster-store-opt kv.cacertfile=/path/to/ca.pem \
--cluster-store-opt kv.certfile=/path/to/cert.pem \
--cluster-store-opt kv.keyfile=/path/to/key.pem
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
- create pass through in daemon for access to functions on daemon
member
- import image
push image
export image and corrections
lookup image & comments
load image
list images
image history & comments
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
* Moving Network Remote APIs out of experimental
* --net can now accept user created networks using network drivers/plugins
* Removed the experimental services concept and --default-network option
* Neccessary backend changes to accomodate multiple networks per container
* Integration Tests
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Madhu Venugopal <madhu@docker.com>
progressreader.Broadcaster becomes broadcaster.Buffered and
broadcastwriter.Writer becomes broadcaster.Unbuffered.
The package broadcastwriter is thus renamed to broadcaster.
Signed-off-by: Tibor Vass <tibor@docker.com>
Implement basic interfaces to write custom routers that can be plugged
to the server. Remove server coupling with the daemon.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Although having a request ID available throughout the codebase is very
valuable, the impact of requiring a Context as an argument to every
function in the codepath of an API request, is too significant and was
not properly understood at the time of the review.
Furthermore, mixing API-layer code with non-API-layer code makes the
latter usable only by API-layer code (one that has a notion of Context).
This reverts commit de41640435, reversing
changes made to 7daeecd42d.
Signed-off-by: Tibor Vass <tibor@docker.com>
Conflicts:
api/server/container.go
builder/internals.go
daemon/container_unix.go
daemon/create.go
This reverts commit ff92f45be4, reversing
changes made to 80e31df3b6.
Reverting to make the next revert easier.
Signed-off-by: Tibor Vass <tibor@docker.com>
Use `pkg/discovery` to provide nodes discovery between daemon instances.
The functionality is driven by two different command-line flags: the
experimental `--cluster-store` (previously `--kv-store`) and
`--cluster-advertise`. It can be used in two ways by interested
components:
1. Externally by calling the `/info` API and examining the cluster store
field. The `pkg/discovery` package can then be used to hit the same
endpoint and watch for appearing or disappearing nodes. That is the
method that will for example be used by Swarm.
2. Internally by using the `Daemon.discoveryWatcher` instance. That is
the method that will for example be used by libnetwork.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Avoid creating a global context object that will be used while the daemon is running.
Not only this object won't ever be garbage collected, but it won't ever be used for anything else than creating other contexts in each request. I think it's a bad practive to have something like this sprawling aroud the code.
This change removes that global object and initializes a context in the cases we don't have already one, like shutting down the server.
This also removes a bunch of context arguments from functions that did nothing with it.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This PR adds a "request ID" to each event generated, the 'docker events'
stream now looks like this:
```
2015-09-10T15:02:50.000000000-07:00 [reqid: c01e3534ddca] de7c5d4ca927253cf4e978ee9c4545161e406e9b5a14617efb52c658b249174a: (from ubuntu) create
```
Note the `[reqID: c01e3534ddca]` part, that's new.
Each HTTP request will generate its own unique ID. So, if you do a
`docker build` you'll see a series of events all with the same reqID.
This allow for log processing tools to determine which events are all related
to the same http request.
I didn't propigate the context to all possible funcs in the daemon,
I decided to just do the ones that needed it in order to get the reqID
into the events. I'd like to have people review this direction first, and
if we're ok with it then I'll make sure we're consistent about when
we pass around the context - IOW, make sure that all funcs at the same level
have a context passed in even if they don't call the log funcs - this will
ensure we're consistent w/o passing it around for all calls unnecessarily.
ping @icecrime @calavera @crosbymichael
Signed-off-by: Doug Davis <dug@us.ibm.com>
- Print the mount table as in /proc/self/mountinfo
- Do not exit prematurely when one of the ipc mounts doesn't exist.
- Do not exit prematurely when one of the ipc mounts cannot be unmounted.
- Add a unit test to see if the cleanup really works.
- Use syscall.MNT_DETACH to cleanup mounts after a crash.
- Unmount IPC mounts when the daemon unregisters an old running container.
Signed-off-by: David Calavera <david.calavera@gmail.com>
- Add unit tests to make sure the functionality is correct.
- Add FilterByDriver to allow filtering volumes by driver, for future
`volume ls` filtering and whatnot.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Using @mavenugo's patch for enabling the libcontainer pre-start hook to
be used for network namespace initialization (correcting the conflict
with user namespaces); updated the boolean check to the more generic
SupportsHooks() name, and fixed the hook state function signature.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
This is the first step in converting out static strings into well-defined
error types. This shows just a few examples of it to get a feel for how things
will look. Once we agree on the basic outline we can then work on converting
the rest of the code over.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Changes include :
* libnetwork support for userns
* driver api change to have 1 interface per endpoint
Signed-off-by: Madhu Venugopal <madhu@docker.com>
This changeset creates /dev/shm and /dev/mqueue mounts for each container under
/var/lib/containers/<id>/ and bind mounts them into the container. When --ipc:container<id/name>
is used, then the /dev/shm and /dev/mqueue of the ipc container are used instead of creating
new ones for the container.
Signed-off-by: Mrunal Patel <mrunalp@gmail.com>
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
(cherry picked from commit d88fe447df)
Allow to set the signal to stop a container in `docker run`:
- Use `--stop-signal` with docker-run to set the default signal the container will use to exit.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Brian Goff
Vincent Demeester
Tibor Vass
Alessandro Boch
Tonis Tiigi
Qiang Huang
David Calavera
Daniel Nephin
Jess Frazelle
Jessica Frazelle
Lukas Waslowski
Phil Estes
Anusha Ragunathan
Michael Crosby
Lei Jitang
Derek McGowan
Sebastiaan van Stijn
Daniel Nephin
Aaron Lehmann
Patrick Hemmer
Antonio Murdaca
Doug Davis
Alexander Morozov
Dan Walsh
Ma Shimiao
Solomon Hykes
Alexander Morozov
Arnaud Porterie
John Howard
Antonio Murdaca
Alexandre Beslic
Madhu Venugopal
Antonio Murdaca
Morgan Bauer
Shijiang Wei
Vincent Demeester
Phil Estes
Daniel Hiltgen
Tibor Vass
Hu Keping
Mrunal Patel