git/git-submodule.sh

637 строки
13 KiB
Bash
Исходник Обычный вид История

#!/bin/sh
#
# git-submodules.sh: add, init, update or list git submodules
#
# Copyright (c) 2007 Lars Hjemli
USAGE="[--quiet] [--cached] \
git-submodule - make "submodule add" more strict, and document it This change makes "submodule add" much more strict in the arguments it takes, and is intended to address confusion as recently noted on the git-list. With this change, the required syntax is: $ git submodule add URL path Specifically, this eliminates the form $ git submodule add URL which was confused by more than one person as $ git submodule add path With this patch, the URL locating the submodule's origin repository can be either an absolute URL, or (if it begins with ./ or ../) can express the submodule's repository location relative to the superproject's origin. This patch also eliminates a third form of URL, which was relative to the superproject's top-level directory (not its repository). Any URL that was neither absolute nor matched ./*|../* was assumed to point to a subdirectory of the superproject as the location of the submodule's origin repository. This URL form was confusing and does not seem to correspond to an important use-case. Specifically, no-one has identified the need to clone from a repository already in the superproject's tree, but if this is needed it is easily done using an absolute URL: $(pwd)/relative-path. So, no functionality is lost with this patch. (t6008-rev-list-submodule.sh did rely upon this relative URL, fixed by using $(pwd).) Following this change, there are exactly four variants of submodule-add, as both arguments have two flavors: URL can be absolute, or can begin with ./|../ and thus names the submodule's origin relative to the superproject's origin. Note: With this patch, "submodule add" discerns an absolute URL as matching /*|*:*: e.g., URL begins with /, or it contains a :. This works for all valid URLs, an absolute path in POSIX, as well as an absolute path on Windows). path can either already exist as a valid git repo, or will be cloned from the given URL. The first form here eases creation of a new submodule in an existing superproject as the submodule can be added and tested in-tree before pushing to the public repository. However, the more usual form is the second, where the repo is cloned from the given URL. This specifically addresses the issue of $ git submodule add a/b/c attempting to clone from a repository at "a/b/c" to create a new module in "c". This also simplifies description of "relative URL" as there is now exactly *one* form: a URL relative to the parent's origin repo. Signed-off-by: Mark Levedahl <mlevedahl@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-10 05:05:40 +04:00
[add <repo> [-b branch] <path>]|[status|init|update [-i|--init]|summary [-n|--summary-limit <n>] [<commit>]] \
[--] [<path>...]"
OPTIONS_SPEC=
. git-sh-setup
require_work_tree
command=
branch=
quiet=
cached=
#
# print stuff on stdout unless -q was specified
#
say()
{
if test -z "$quiet"
then
echo "$@"
fi
}
# Resolve relative url by appending to parent's url
resolve_relative_url ()
{
branch="$(git symbolic-ref HEAD 2>/dev/null)"
remote="$(git config branch.${branch#refs/heads/}.remote)"
remote="${remote:-origin}"
remoteurl=$(git config "remote.$remote.url") ||
die "remote ($remote) does not have a url defined in .git/config"
url="$1"
while test -n "$url"
do
case "$url" in
../*)
url="${url#../}"
remoteurl="${remoteurl%/*}"
;;
./*)
url="${url#./}"
;;
*)
break;;
esac
done
echo "$remoteurl/$url"
}
#
# Map submodule path to submodule name
#
# $1 = path
#
module_name()
{
# Do we have "submodule.<something>.path = $1" defined in .gitmodules file?
re=$(printf '%s\n' "$1" | sed -e 's/[].[^$\\*]/\\&/g')
name=$( git config -f .gitmodules --get-regexp '^submodule\..*\.path$' |
sed -n -e 's|^submodule\.\(.*\)\.path '"$re"'$|\1|p' )
test -z "$name" &&
die "No submodule mapping found in .gitmodules for path '$path'"
echo "$name"
}
#
# Clone a submodule
#
# Prior to calling, cmd_update checks that a possibly existing
# path is not a git repository.
# Likewise, cmd_add checks that path does not exist at all,
# since it is the location of a new submodule.
#
module_clone()
{
path=$1
url=$2
# If there already is a directory at the submodule path,
# expect it to be empty (since that is the default checkout
# action) and try to remove it.
# Note: if $path is a symlink to a directory the test will
# succeed but the rmdir will fail. We might want to fix this.
if test -d "$path"
then
rmdir "$path" 2>/dev/null ||
die "Directory '$path' exist, but is neither empty nor a git repository"
fi
test -e "$path" &&
die "A file already exist at path '$path'"
git-clone -n "$url" "$path" ||
die "Clone of '$url' into submodule path '$path' failed"
}
#
# Add a new submodule to the working tree, .gitmodules and the index
#
git-submodule - make "submodule add" more strict, and document it This change makes "submodule add" much more strict in the arguments it takes, and is intended to address confusion as recently noted on the git-list. With this change, the required syntax is: $ git submodule add URL path Specifically, this eliminates the form $ git submodule add URL which was confused by more than one person as $ git submodule add path With this patch, the URL locating the submodule's origin repository can be either an absolute URL, or (if it begins with ./ or ../) can express the submodule's repository location relative to the superproject's origin. This patch also eliminates a third form of URL, which was relative to the superproject's top-level directory (not its repository). Any URL that was neither absolute nor matched ./*|../* was assumed to point to a subdirectory of the superproject as the location of the submodule's origin repository. This URL form was confusing and does not seem to correspond to an important use-case. Specifically, no-one has identified the need to clone from a repository already in the superproject's tree, but if this is needed it is easily done using an absolute URL: $(pwd)/relative-path. So, no functionality is lost with this patch. (t6008-rev-list-submodule.sh did rely upon this relative URL, fixed by using $(pwd).) Following this change, there are exactly four variants of submodule-add, as both arguments have two flavors: URL can be absolute, or can begin with ./|../ and thus names the submodule's origin relative to the superproject's origin. Note: With this patch, "submodule add" discerns an absolute URL as matching /*|*:*: e.g., URL begins with /, or it contains a :. This works for all valid URLs, an absolute path in POSIX, as well as an absolute path on Windows). path can either already exist as a valid git repo, or will be cloned from the given URL. The first form here eases creation of a new submodule in an existing superproject as the submodule can be added and tested in-tree before pushing to the public repository. However, the more usual form is the second, where the repo is cloned from the given URL. This specifically addresses the issue of $ git submodule add a/b/c attempting to clone from a repository at "a/b/c" to create a new module in "c". This also simplifies description of "relative URL" as there is now exactly *one* form: a URL relative to the parent's origin repo. Signed-off-by: Mark Levedahl <mlevedahl@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-10 05:05:40 +04:00
# $@ = repo path
#
# optional branch is stored in global branch variable
#
cmd_add()
{
# parse $args after "submodule ... add".
while test $# -ne 0
do
case "$1" in
-b | --branch)
case "$2" in '') usage ;; esac
branch=$2
shift
;;
-q|--quiet)
quiet=1
;;
--)
shift
break
;;
-*)
usage
;;
*)
break
;;
esac
shift
done
repo=$1
path=$2
git-submodule - make "submodule add" more strict, and document it This change makes "submodule add" much more strict in the arguments it takes, and is intended to address confusion as recently noted on the git-list. With this change, the required syntax is: $ git submodule add URL path Specifically, this eliminates the form $ git submodule add URL which was confused by more than one person as $ git submodule add path With this patch, the URL locating the submodule's origin repository can be either an absolute URL, or (if it begins with ./ or ../) can express the submodule's repository location relative to the superproject's origin. This patch also eliminates a third form of URL, which was relative to the superproject's top-level directory (not its repository). Any URL that was neither absolute nor matched ./*|../* was assumed to point to a subdirectory of the superproject as the location of the submodule's origin repository. This URL form was confusing and does not seem to correspond to an important use-case. Specifically, no-one has identified the need to clone from a repository already in the superproject's tree, but if this is needed it is easily done using an absolute URL: $(pwd)/relative-path. So, no functionality is lost with this patch. (t6008-rev-list-submodule.sh did rely upon this relative URL, fixed by using $(pwd).) Following this change, there are exactly four variants of submodule-add, as both arguments have two flavors: URL can be absolute, or can begin with ./|../ and thus names the submodule's origin relative to the superproject's origin. Note: With this patch, "submodule add" discerns an absolute URL as matching /*|*:*: e.g., URL begins with /, or it contains a :. This works for all valid URLs, an absolute path in POSIX, as well as an absolute path on Windows). path can either already exist as a valid git repo, or will be cloned from the given URL. The first form here eases creation of a new submodule in an existing superproject as the submodule can be added and tested in-tree before pushing to the public repository. However, the more usual form is the second, where the repo is cloned from the given URL. This specifically addresses the issue of $ git submodule add a/b/c attempting to clone from a repository at "a/b/c" to create a new module in "c". This also simplifies description of "relative URL" as there is now exactly *one* form: a URL relative to the parent's origin repo. Signed-off-by: Mark Levedahl <mlevedahl@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-10 05:05:40 +04:00
if test -z "$repo" -o -z "$path"; then
usage
fi
git-submodule - make "submodule add" more strict, and document it This change makes "submodule add" much more strict in the arguments it takes, and is intended to address confusion as recently noted on the git-list. With this change, the required syntax is: $ git submodule add URL path Specifically, this eliminates the form $ git submodule add URL which was confused by more than one person as $ git submodule add path With this patch, the URL locating the submodule's origin repository can be either an absolute URL, or (if it begins with ./ or ../) can express the submodule's repository location relative to the superproject's origin. This patch also eliminates a third form of URL, which was relative to the superproject's top-level directory (not its repository). Any URL that was neither absolute nor matched ./*|../* was assumed to point to a subdirectory of the superproject as the location of the submodule's origin repository. This URL form was confusing and does not seem to correspond to an important use-case. Specifically, no-one has identified the need to clone from a repository already in the superproject's tree, but if this is needed it is easily done using an absolute URL: $(pwd)/relative-path. So, no functionality is lost with this patch. (t6008-rev-list-submodule.sh did rely upon this relative URL, fixed by using $(pwd).) Following this change, there are exactly four variants of submodule-add, as both arguments have two flavors: URL can be absolute, or can begin with ./|../ and thus names the submodule's origin relative to the superproject's origin. Note: With this patch, "submodule add" discerns an absolute URL as matching /*|*:*: e.g., URL begins with /, or it contains a :. This works for all valid URLs, an absolute path in POSIX, as well as an absolute path on Windows). path can either already exist as a valid git repo, or will be cloned from the given URL. The first form here eases creation of a new submodule in an existing superproject as the submodule can be added and tested in-tree before pushing to the public repository. However, the more usual form is the second, where the repo is cloned from the given URL. This specifically addresses the issue of $ git submodule add a/b/c attempting to clone from a repository at "a/b/c" to create a new module in "c". This also simplifies description of "relative URL" as there is now exactly *one* form: a URL relative to the parent's origin repo. Signed-off-by: Mark Levedahl <mlevedahl@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-10 05:05:40 +04:00
# assure repo is absolute or relative to parent
case "$repo" in
./*|../*)
# dereference source url relative to parent's url
realrepo=$(resolve_relative_url "$repo") || exit
;;
*:*|/*)
# absolute url
realrepo=$repo
;;
*)
die "repo URL: '$repo' must be absolute or begin with ./|../"
;;
esac
# strip trailing slashes from path
path=$(echo "$path" | sed -e 's|/*$||')
git ls-files --error-unmatch "$path" > /dev/null 2>&1 &&
die "'$path' already exists in the index"
# perhaps the path exists and is already a git repo, else clone it
if test -e "$path"
then
if test -d "$path"/.git -o -f "$path"/.git
then
echo "Adding existing repo at '$path' to the index"
else
die "'$path' already exists and is not a valid git repo"
fi
case "$repo" in
./*|../*)
url=$(resolve_relative_url "$repo") || exit
;;
*)
url="$repo"
;;
esac
git config submodule."$path".url "$url"
else
module_clone "$path" "$realrepo" || exit
(unset GIT_DIR; cd "$path" && git checkout -f -q ${branch:+-b "$branch" "origin/$branch"}) ||
die "Unable to checkout submodule '$path'"
fi
git add "$path" ||
die "Failed to add submodule '$path'"
git config -f .gitmodules submodule."$path".path "$path" &&
git config -f .gitmodules submodule."$path".url "$repo" &&
git add .gitmodules ||
die "Failed to register submodule '$path'"
}
#
# Register submodules in .git/config
#
# $@ = requested paths (default to all)
#
cmd_init()
{
# parse $args after "submodule ... init".
while test $# -ne 0
do
case "$1" in
-q|--quiet)
quiet=1
;;
--)
shift
break
;;
-*)
usage
;;
*)
break
;;
esac
shift
done
git ls-files --stage -- "$@" | grep '^160000 ' |
while read mode sha1 stage path
do
# Skip already registered paths
name=$(module_name "$path") || exit
url=$(git config submodule."$name".url)
test -z "$url" || continue
url=$(git config -f .gitmodules submodule."$name".url)
test -z "$url" &&
die "No url found for submodule path '$path' in .gitmodules"
# Possibly a url relative to parent
case "$url" in
./*|../*)
url=$(resolve_relative_url "$url") || exit
;;
esac
git config submodule."$name".url "$url" ||
die "Failed to register url for submodule path '$path'"
say "Submodule '$name' ($url) registered for path '$path'"
done
}
#
# Update each submodule path to correct revision, using clone and checkout as needed
#
# $@ = requested paths (default to all)
#
cmd_update()
{
# parse $args after "submodule ... update".
while test $# -ne 0
do
case "$1" in
-q|--quiet)
shift
quiet=1
;;
-i|--init)
shift
cmd_init "$@" || return
;;
--)
shift
break
;;
-*)
usage
;;
*)
break
;;
esac
done
git ls-files --stage -- "$@" | grep '^160000 ' |
while read mode sha1 stage path
do
name=$(module_name "$path") || exit
url=$(git config submodule."$name".url)
if test -z "$url"
then
# Only mention uninitialized submodules when its
# path have been specified
test "$#" != "0" &&
say "Submodule path '$path' not initialized"
say "Maybe you want to use 'update --init'?"
continue
fi
if ! test -d "$path"/.git -o -f "$path"/.git
then
module_clone "$path" "$url" || exit
subsha1=
else
subsha1=$(unset GIT_DIR; cd "$path" &&
git rev-parse --verify HEAD) ||
die "Unable to find current revision in submodule path '$path'"
fi
if test "$subsha1" != "$sha1"
then
force=
if test -z "$subsha1"
then
force="-f"
fi
(unset GIT_DIR; cd "$path" && git-fetch &&
git-checkout $force -q "$sha1") ||
die "Unable to checkout '$sha1' in submodule path '$path'"
say "Submodule path '$path': checked out '$sha1'"
fi
done
}
set_name_rev () {
revname=$( (
unset GIT_DIR
cd "$1" && {
git describe "$2" 2>/dev/null ||
git describe --tags "$2" 2>/dev/null ||
git describe --contains "$2" 2>/dev/null ||
git describe --all --always "$2"
}
) )
test -z "$revname" || revname=" ($revname)"
}
#
# Show commit summary for submodules in index or working tree
#
# If '--cached' is given, show summary between index and given commit,
# or between working tree and given commit
#
# $@ = [commit (default 'HEAD'),] requested paths (default all)
#
cmd_summary() {
summary_limit=-1
for_status=
# parse $args after "submodule ... summary".
while test $# -ne 0
do
case "$1" in
--cached)
cached="$1"
;;
--for-status)
for_status="$1"
;;
-n|--summary-limit)
if summary_limit=$(($2 + 0)) 2>/dev/null && test "$summary_limit" = "$2"
then
:
else
usage
fi
shift
;;
--)
shift
break
;;
-*)
usage
;;
*)
break
;;
esac
shift
done
test $summary_limit = 0 && return
if rev=$(git rev-parse --verify "$1^0" 2>/dev/null)
then
head=$rev
shift
else
head=HEAD
fi
cd_to_toplevel
# Get modified modules cared by user
modules=$(git diff-index $cached --raw $head -- "$@" |
grep -e '^:160000' -e '^:[0-7]* 160000' |
while read mod_src mod_dst sha1_src sha1_dst status name
do
# Always show modules deleted or type-changed (blob<->module)
test $status = D -o $status = T && echo "$name" && continue
# Also show added or modified modules which are checked out
GIT_DIR="$name/.git" git-rev-parse --git-dir >/dev/null 2>&1 &&
echo "$name"
done
)
git-submodule summary: show commit summary This patch does the hard work to show submodule commit summary. For a modified submodule, a series of commits will be shown with the following command: git log --pretty='format:%m %s' \ --first-parent sha1_src...sha1_dst where the sha1_src is from the given super project commit and the sha1_dst is from the index or working tree (switched by --cached). For a deleted, added, or typechanged (blob<->submodule) submodule, only one single newest commit from the existing end (for example, src end for submodule deleted or type changed from submodule to blob) will be shown. If the src/dst sha1 for a submodule is missing in the submodule directory, a warning will be issued except in two cases where the submodule directory is deleted (type 'D') or typechanged to blob (one case of type 'T'). In the title line for a submodule, the src/dst sha1 and the number of commits (--first-parent) between the two commits will be shown. The following example demonstrates most cases. Example: commit summary for modified submodules sm1-sm5. -------------------------------------------- $ git submodule summary * sm1 354cd45...3f751e5 (4): < one line message for C < one line message for B > one line message for D > one line message for E * sm2 5c8bfb5...000000 (3): < one line message for F * sm3 354cd45...3f751e5: Warn: sm3 doesn't contain commit 354cd45 * sm4 354cd34(submodule)-> 235efa(blob) (1): < one line message for G * sm5 354cd34(blob)-> 235efa(submodule) (5): > one line message for H -------------------------------------------- Signed-off-by: Ping Yin <pkufranky@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-11 16:52:16 +03:00
test -z "$modules" && return
git-submodule summary: show commit summary This patch does the hard work to show submodule commit summary. For a modified submodule, a series of commits will be shown with the following command: git log --pretty='format:%m %s' \ --first-parent sha1_src...sha1_dst where the sha1_src is from the given super project commit and the sha1_dst is from the index or working tree (switched by --cached). For a deleted, added, or typechanged (blob<->submodule) submodule, only one single newest commit from the existing end (for example, src end for submodule deleted or type changed from submodule to blob) will be shown. If the src/dst sha1 for a submodule is missing in the submodule directory, a warning will be issued except in two cases where the submodule directory is deleted (type 'D') or typechanged to blob (one case of type 'T'). In the title line for a submodule, the src/dst sha1 and the number of commits (--first-parent) between the two commits will be shown. The following example demonstrates most cases. Example: commit summary for modified submodules sm1-sm5. -------------------------------------------- $ git submodule summary * sm1 354cd45...3f751e5 (4): < one line message for C < one line message for B > one line message for D > one line message for E * sm2 5c8bfb5...000000 (3): < one line message for F * sm3 354cd45...3f751e5: Warn: sm3 doesn't contain commit 354cd45 * sm4 354cd34(submodule)-> 235efa(blob) (1): < one line message for G * sm5 354cd34(blob)-> 235efa(submodule) (5): > one line message for H -------------------------------------------- Signed-off-by: Ping Yin <pkufranky@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-11 16:52:16 +03:00
git diff-index $cached --raw $head -- $modules |
grep -e '^:160000' -e '^:[0-7]* 160000' |
cut -c2- |
while read mod_src mod_dst sha1_src sha1_dst status name
do
if test -z "$cached" &&
test $sha1_dst = 0000000000000000000000000000000000000000
then
case "$mod_dst" in
160000)
sha1_dst=$(GIT_DIR="$name/.git" git rev-parse HEAD)
;;
100644 | 100755 | 120000)
sha1_dst=$(git hash-object $name)
;;
000000)
;; # removed
*)
# unexpected type
echo >&2 "unexpected mode $mod_dst"
continue ;;
esac
fi
missing_src=
missing_dst=
test $mod_src = 160000 &&
! GIT_DIR="$name/.git" git-rev-parse --verify $sha1_src^0 >/dev/null 2>&1 &&
missing_src=t
test $mod_dst = 160000 &&
! GIT_DIR="$name/.git" git-rev-parse --verify $sha1_dst^0 >/dev/null 2>&1 &&
missing_dst=t
git-submodule summary: show commit summary This patch does the hard work to show submodule commit summary. For a modified submodule, a series of commits will be shown with the following command: git log --pretty='format:%m %s' \ --first-parent sha1_src...sha1_dst where the sha1_src is from the given super project commit and the sha1_dst is from the index or working tree (switched by --cached). For a deleted, added, or typechanged (blob<->submodule) submodule, only one single newest commit from the existing end (for example, src end for submodule deleted or type changed from submodule to blob) will be shown. If the src/dst sha1 for a submodule is missing in the submodule directory, a warning will be issued except in two cases where the submodule directory is deleted (type 'D') or typechanged to blob (one case of type 'T'). In the title line for a submodule, the src/dst sha1 and the number of commits (--first-parent) between the two commits will be shown. The following example demonstrates most cases. Example: commit summary for modified submodules sm1-sm5. -------------------------------------------- $ git submodule summary * sm1 354cd45...3f751e5 (4): < one line message for C < one line message for B > one line message for D > one line message for E * sm2 5c8bfb5...000000 (3): < one line message for F * sm3 354cd45...3f751e5: Warn: sm3 doesn't contain commit 354cd45 * sm4 354cd34(submodule)-> 235efa(blob) (1): < one line message for G * sm5 354cd34(blob)-> 235efa(submodule) (5): > one line message for H -------------------------------------------- Signed-off-by: Ping Yin <pkufranky@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-11 16:52:16 +03:00
total_commits=
case "$missing_src,$missing_dst" in
t,)
errmsg=" Warn: $name doesn't contain commit $sha1_src"
;;
,t)
errmsg=" Warn: $name doesn't contain commit $sha1_dst"
;;
t,t)
errmsg=" Warn: $name doesn't contain commits $sha1_src and $sha1_dst"
;;
*)
errmsg=
total_commits=$(
if test $mod_src = 160000 -a $mod_dst = 160000
then
range="$sha1_src...$sha1_dst"
elif test $mod_src = 160000
then
range=$sha1_src
else
range=$sha1_dst
fi
GIT_DIR="$name/.git" \
git log --pretty=oneline --first-parent $range | wc -l
)
total_commits=" ($(($total_commits + 0)))"
git-submodule summary: show commit summary This patch does the hard work to show submodule commit summary. For a modified submodule, a series of commits will be shown with the following command: git log --pretty='format:%m %s' \ --first-parent sha1_src...sha1_dst where the sha1_src is from the given super project commit and the sha1_dst is from the index or working tree (switched by --cached). For a deleted, added, or typechanged (blob<->submodule) submodule, only one single newest commit from the existing end (for example, src end for submodule deleted or type changed from submodule to blob) will be shown. If the src/dst sha1 for a submodule is missing in the submodule directory, a warning will be issued except in two cases where the submodule directory is deleted (type 'D') or typechanged to blob (one case of type 'T'). In the title line for a submodule, the src/dst sha1 and the number of commits (--first-parent) between the two commits will be shown. The following example demonstrates most cases. Example: commit summary for modified submodules sm1-sm5. -------------------------------------------- $ git submodule summary * sm1 354cd45...3f751e5 (4): < one line message for C < one line message for B > one line message for D > one line message for E * sm2 5c8bfb5...000000 (3): < one line message for F * sm3 354cd45...3f751e5: Warn: sm3 doesn't contain commit 354cd45 * sm4 354cd34(submodule)-> 235efa(blob) (1): < one line message for G * sm5 354cd34(blob)-> 235efa(submodule) (5): > one line message for H -------------------------------------------- Signed-off-by: Ping Yin <pkufranky@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-11 16:52:16 +03:00
;;
esac
sha1_abbr_src=$(echo $sha1_src | cut -c1-7)
sha1_abbr_dst=$(echo $sha1_dst | cut -c1-7)
if test $status = T
then
if test $mod_dst = 160000
then
echo "* $name $sha1_abbr_src(blob)->$sha1_abbr_dst(submodule)$total_commits:"
else
echo "* $name $sha1_abbr_src(submodule)->$sha1_abbr_dst(blob)$total_commits:"
fi
else
echo "* $name $sha1_abbr_src...$sha1_abbr_dst$total_commits:"
fi
if test -n "$errmsg"
then
# Don't give error msg for modification whose dst is not submodule
# i.e. deleted or changed to blob
test $mod_dst = 160000 && echo "$errmsg"
else
if test $mod_src = 160000 -a $mod_dst = 160000
then
limit=
test $summary_limit -gt 0 && limit="-$summary_limit"
git-submodule summary: show commit summary This patch does the hard work to show submodule commit summary. For a modified submodule, a series of commits will be shown with the following command: git log --pretty='format:%m %s' \ --first-parent sha1_src...sha1_dst where the sha1_src is from the given super project commit and the sha1_dst is from the index or working tree (switched by --cached). For a deleted, added, or typechanged (blob<->submodule) submodule, only one single newest commit from the existing end (for example, src end for submodule deleted or type changed from submodule to blob) will be shown. If the src/dst sha1 for a submodule is missing in the submodule directory, a warning will be issued except in two cases where the submodule directory is deleted (type 'D') or typechanged to blob (one case of type 'T'). In the title line for a submodule, the src/dst sha1 and the number of commits (--first-parent) between the two commits will be shown. The following example demonstrates most cases. Example: commit summary for modified submodules sm1-sm5. -------------------------------------------- $ git submodule summary * sm1 354cd45...3f751e5 (4): < one line message for C < one line message for B > one line message for D > one line message for E * sm2 5c8bfb5...000000 (3): < one line message for F * sm3 354cd45...3f751e5: Warn: sm3 doesn't contain commit 354cd45 * sm4 354cd34(submodule)-> 235efa(blob) (1): < one line message for G * sm5 354cd34(blob)-> 235efa(submodule) (5): > one line message for H -------------------------------------------- Signed-off-by: Ping Yin <pkufranky@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-11 16:52:16 +03:00
GIT_DIR="$name/.git" \
git log $limit --pretty='format: %m %s' \
git-submodule summary: show commit summary This patch does the hard work to show submodule commit summary. For a modified submodule, a series of commits will be shown with the following command: git log --pretty='format:%m %s' \ --first-parent sha1_src...sha1_dst where the sha1_src is from the given super project commit and the sha1_dst is from the index or working tree (switched by --cached). For a deleted, added, or typechanged (blob<->submodule) submodule, only one single newest commit from the existing end (for example, src end for submodule deleted or type changed from submodule to blob) will be shown. If the src/dst sha1 for a submodule is missing in the submodule directory, a warning will be issued except in two cases where the submodule directory is deleted (type 'D') or typechanged to blob (one case of type 'T'). In the title line for a submodule, the src/dst sha1 and the number of commits (--first-parent) between the two commits will be shown. The following example demonstrates most cases. Example: commit summary for modified submodules sm1-sm5. -------------------------------------------- $ git submodule summary * sm1 354cd45...3f751e5 (4): < one line message for C < one line message for B > one line message for D > one line message for E * sm2 5c8bfb5...000000 (3): < one line message for F * sm3 354cd45...3f751e5: Warn: sm3 doesn't contain commit 354cd45 * sm4 354cd34(submodule)-> 235efa(blob) (1): < one line message for G * sm5 354cd34(blob)-> 235efa(submodule) (5): > one line message for H -------------------------------------------- Signed-off-by: Ping Yin <pkufranky@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-11 16:52:16 +03:00
--first-parent $sha1_src...$sha1_dst
elif test $mod_dst = 160000
then
GIT_DIR="$name/.git" \
git log --pretty='format: > %s' -1 $sha1_dst
else
GIT_DIR="$name/.git" \
git log --pretty='format: < %s' -1 $sha1_src
fi
echo
fi
echo
done |
if test -n "$for_status"; then
echo "# Modified submodules:"
echo "#"
sed -e 's|^|# |' -e 's|^# $|#|'
else
cat
fi
}
#
# List all submodules, prefixed with:
# - submodule not initialized
# + different revision checked out
#
# If --cached was specified the revision in the index will be printed
# instead of the currently checked out revision.
#
# $@ = requested paths (default to all)
#
cmd_status()
{
# parse $args after "submodule ... status".
while test $# -ne 0
do
case "$1" in
-q|--quiet)
quiet=1
;;
--cached)
cached=1
;;
--)
shift
break
;;
-*)
usage
;;
*)
break
;;
esac
shift
done
git ls-files --stage -- "$@" | grep '^160000 ' |
while read mode sha1 stage path
do
name=$(module_name "$path") || exit
url=$(git config submodule."$name".url)
if test -z "$url" || ! test -d "$path"/.git -o -f "$path"/.git
then
say "-$sha1 $path"
continue;
fi
set_name_rev "$path" "$sha1"
if git diff-files --quiet -- "$path"
then
say " $sha1 $path$revname"
else
if test -z "$cached"
then
sha1=$(unset GIT_DIR; cd "$path" && git rev-parse --verify HEAD)
set_name_rev "$path" "$sha1"
fi
say "+$sha1 $path$revname"
fi
done
}
# This loop parses the command line arguments to find the
# subcommand name to dispatch. Parsing of the subcommand specific
# options are primarily done by the subcommand implementations.
# Subcommand specific options such as --branch and --cached are
# parsed here as well, for backward compatibility.
while test $# != 0 && test -z "$command"
do
case "$1" in
add | init | update | status | summary)
command=$1
;;
-q|--quiet)
quiet=1
;;
-b|--branch)
case "$2" in
'')
usage
;;
esac
branch="$2"; shift
;;
--cached)
cached="$1"
;;
--)
break
;;
-*)
usage
;;
*)
break
;;
esac
shift
done
# No command word defaults to "status"
test -n "$command" || command=status
# "-b branch" is accepted only by "add"
if test -n "$branch" && test "$command" != add
then
usage
fi
# "--cached" is accepted only by "status" and "summary"
if test -n "$cached" && test "$command" != status -a "$command" != summary
then
usage
fi
"cmd_$command" "$@"