git/builtin-add.c

367 строки
9.2 KiB
C
Исходник Обычный вид История

/*
* "git add" builtin command
*
* Copyright (C) 2006 Linus Torvalds
*/
#include "cache.h"
#include "builtin.h"
#include "dir.h"
git-add --interactive A script to be driven when the user says "git add --interactive" is introduced. When it is run, first it runs its internal 'status' command to show the current status, and then goes into its internactive command loop. The command loop shows the list of subcommands available, and gives a prompt "What now> ". In general, when the prompt ends with a single '>', you can pick only one of the choices given and type return, like this: *** Commands *** 1: status 2: update 3: revert 4: add untracked 5: patch 6: diff 7: quit 8: help What now> 1 You also could say "s" or "sta" or "status" above as long as the choice is unique. The main command loop has 6 subcommands (plus help and quit). * 'status' shows the change between HEAD and index (i.e. what will be committed if you say "git commit"), and between index and working tree files (i.e. what you could stage further before "git commit" using "git-add") for each path. A sample output looks like this: staged unstaged path 1: binary nothing foo.png 2: +403/-35 +1/-1 git-add--interactive.perl It shows that foo.png has differences from HEAD (but that is binary so line count cannot be shown) and there is no difference between indexed copy and the working tree version (if the working tree version were also different, 'binary' would have been shown in place of 'nothing'). The other file, git-add--interactive.perl, has 403 lines added and 35 lines deleted if you commit what is in the index, but working tree file has further modifications (one addition and one deletion). * 'update' shows the status information and gives prompt "Update>>". When the prompt ends with double '>>', you can make more than one selection, concatenated with whitespace or comma. Also you can say ranges. E.g. "2-5 7,9" to choose 2,3,4,5,7,9 from the list. You can say '*' to choose everything. What you chose are then highlighted with '*', like this: staged unstaged path 1: binary nothing foo.png * 2: +403/-35 +1/-1 git-add--interactive.perl To remove selection, prefix the input with - like this: Update>> -2 After making the selection, answer with an empty line to stage the contents of working tree files for selected paths in the index. * 'revert' has a very similar UI to 'update', and the staged information for selected paths are reverted to that of the HEAD version. Reverting new paths makes them untracked. * 'add untracked' has a very similar UI to 'update' and 'revert', and lets you add untracked paths to the index. * 'patch' lets you choose one path out of 'status' like selection. After choosing the path, it presents diff between the index and the working tree file and asks you if you want to stage the change of each hunk. You can say: y - add the change from that hunk to index n - do not add the change from that hunk to index a - add the change from that hunk and all the rest to index d - do not the change from that hunk nor any of the rest to index j - do not decide on this hunk now, and view the next undecided hunk J - do not decide on this hunk now, and view the next hunk k - do not decide on this hunk now, and view the previous undecided hunk K - do not decide on this hunk now, and view the previous hunk After deciding the fate for all hunks, if there is any hunk that was chosen, the index is updated with the selected hunks. * 'diff' lets you review what will be committed (i.e. between HEAD and index). This is still rough, but does everything except a few things I think are needed. * 'patch' should be able to allow splitting a hunk into multiple hunks. * 'patch' does not adjust the line offsets @@ -k,l +m,n @@ in the hunk header. This does not have major problem in practice, but it _should_ do the adjustment. * It does not have any explicit support for a merge in progress; it may not work at all. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-11 07:55:50 +03:00
#include "exec_cmd.h"
#include "cache-tree.h"
#include "run-command.h"
#include "parse-options.h"
#include "diff.h"
#include "revision.h"
static const char * const builtin_add_usage[] = {
"git add [options] [--] <filepattern>...",
NULL
};
static int patch_interactive, add_interactive, edit_interactive;
static int take_worktree_changes;
static void fill_pathspec_matches(const char **pathspec, char *seen, int specs)
{
int num_unmatched = 0, i;
/*
* Since we are walking the index as if we were walking the directory,
* we have to mark the matched pathspec as seen; otherwise we will
* mistakenly think that the user gave a pathspec that did not match
* anything.
*/
for (i = 0; i < specs; i++)
if (!seen[i])
num_unmatched++;
if (!num_unmatched)
return;
for (i = 0; i < active_nr; i++) {
struct cache_entry *ce = active_cache[i];
match_pathspec(pathspec, ce->name, ce_namelen(ce), 0, seen);
}
}
static void prune_directory(struct dir_struct *dir, const char **pathspec, int prefix)
{
char *seen;
int i, specs;
struct dir_entry **src, **dst;
for (specs = 0; pathspec[specs]; specs++)
/* nothing */;
seen = xcalloc(specs, 1);
src = dst = dir->entries;
i = dir->nr;
while (--i >= 0) {
struct dir_entry *entry = *src++;
if (match_pathspec(pathspec, entry->name, entry->len,
prefix, seen))
*dst++ = entry;
}
dir->nr = dst - dir->entries;
fill_pathspec_matches(pathspec, seen, specs);
for (i = 0; i < specs; i++) {
if (!seen[i] && pathspec[i][0] && !file_exists(pathspec[i]))
die("pathspec '%s' did not match any files",
pathspec[i]);
}
free(seen);
}
static void treat_gitlinks(const char **pathspec)
{
int i;
if (!pathspec || !*pathspec)
return;
for (i = 0; i < active_nr; i++) {
struct cache_entry *ce = active_cache[i];
if (S_ISGITLINK(ce->ce_mode)) {
int len = ce_namelen(ce), j;
for (j = 0; pathspec[j]; j++) {
int len2 = strlen(pathspec[j]);
if (len2 <= len || pathspec[j][len] != '/' ||
memcmp(ce->name, pathspec[j], len))
continue;
if (len2 == len + 1)
/* strip trailing slash */
pathspec[j] = xstrndup(ce->name, len);
else
die ("Path '%s' is in submodule '%.*s'",
pathspec[j], len, ce->name);
}
}
}
}
static void refresh(int verbose, const char **pathspec)
{
char *seen;
int i, specs;
for (specs = 0; pathspec[specs]; specs++)
/* nothing */;
seen = xcalloc(specs, 1);
refresh_index(&the_index, verbose ? REFRESH_IN_PORCELAIN : REFRESH_QUIET,
pathspec, seen, "Unstaged changes after refreshing the index:");
for (i = 0; i < specs; i++) {
if (!seen[i])
die("pathspec '%s' did not match any files", pathspec[i]);
}
free(seen);
}
static const char **validate_pathspec(int argc, const char **argv, const char *prefix)
{
const char **pathspec = get_pathspec(prefix, argv);
if (pathspec) {
const char **p;
for (p = pathspec; *p; p++) {
if (has_symlink_leading_path(*p, strlen(*p))) {
int len = prefix ? strlen(prefix) : 0;
die("'%s' is beyond a symbolic link", *p + len);
}
}
}
return pathspec;
}
int run_add_interactive(const char *revision, const char *patch_mode,
const char **pathspec)
{
int status, ac, pc = 0;
const char **args;
if (pathspec)
while (pathspec[pc])
pc++;
args = xcalloc(sizeof(const char *), (pc + 5));
ac = 0;
args[ac++] = "add--interactive";
if (patch_mode)
args[ac++] = patch_mode;
if (revision)
args[ac++] = revision;
args[ac++] = "--";
if (pc) {
memcpy(&(args[ac]), pathspec, sizeof(const char *) * pc);
ac += pc;
}
args[ac] = NULL;
status = run_command_v_opt(args, RUN_GIT_CMD);
free(args);
return status;
}
int interactive_add(int argc, const char **argv, const char *prefix)
{
const char **pathspec = NULL;
if (argc) {
pathspec = validate_pathspec(argc, argv, prefix);
if (!pathspec)
return -1;
}
return run_add_interactive(NULL,
patch_interactive ? "--patch" : NULL,
pathspec);
}
static int edit_patch(int argc, const char **argv, const char *prefix)
{
char *file = xstrdup(git_path("ADD_EDIT.patch"));
const char *apply_argv[] = { "apply", "--recount", "--cached",
file, NULL };
struct child_process child;
struct rev_info rev;
int out;
struct stat st;
git_config(git_diff_basic_config, NULL); /* no "diff" UI options */
if (read_cache() < 0)
die ("Could not read the index");
init_revisions(&rev, prefix);
rev.diffopt.context = 7;
argc = setup_revisions(argc, argv, &rev, NULL);
rev.diffopt.output_format = DIFF_FORMAT_PATCH;
out = open(file, O_CREAT | O_WRONLY, 0644);
if (out < 0)
die ("Could not open '%s' for writing.", file);
rev.diffopt.file = fdopen(out, "w");
rev.diffopt.close_file = 1;
if (run_diff_files(&rev, 0))
die ("Could not write patch");
launch_editor(file, NULL, NULL);
if (stat(file, &st))
die_errno("Could not stat '%s'", file);
if (!st.st_size)
die("Empty patch. Aborted.");
memset(&child, 0, sizeof(child));
child.git_cmd = 1;
child.argv = apply_argv;
if (run_command(&child))
die ("Could not apply '%s'", file);
unlink(file);
return 0;
}
static struct lock_file lock_file;
static const char ignore_error[] =
"The following paths are ignored by one of your .gitignore files:\n";
static int verbose = 0, show_only = 0, ignored_too = 0, refresh_only = 0;
static int ignore_add_errors, addremove, intent_to_add;
static struct option builtin_add_options[] = {
OPT__DRY_RUN(&show_only),
OPT__VERBOSE(&verbose),
OPT_GROUP(""),
OPT_BOOLEAN('i', "interactive", &add_interactive, "interactive picking"),
OPT_BOOLEAN('p', "patch", &patch_interactive, "interactive patching"),
OPT_BOOLEAN('e', "edit", &edit_interactive, "edit current diff and apply"),
OPT_BOOLEAN('f', "force", &ignored_too, "allow adding otherwise ignored files"),
OPT_BOOLEAN('u', "update", &take_worktree_changes, "update tracked files"),
OPT_BOOLEAN('N', "intent-to-add", &intent_to_add, "record only the fact that the path will be added later"),
OPT_BOOLEAN('A', "all", &addremove, "add all, noticing removal of tracked files"),
OPT_BOOLEAN( 0 , "refresh", &refresh_only, "don't add, only refresh the index"),
OPT_BOOLEAN( 0 , "ignore-errors", &ignore_add_errors, "just skip files which cannot be added because of errors"),
OPT_END(),
};
static int add_config(const char *var, const char *value, void *cb)
{
if (!strcasecmp(var, "add.ignore-errors")) {
ignore_add_errors = git_config_bool(var, value);
return 0;
}
return git_default_config(var, value, cb);
}
static int add_files(struct dir_struct *dir, int flags)
{
int i, exit_status = 0;
if (dir->ignored_nr) {
fprintf(stderr, ignore_error);
for (i = 0; i < dir->ignored_nr; i++)
fprintf(stderr, "%s\n", dir->ignored[i]->name);
fprintf(stderr, "Use -f if you really want to add them.\n");
die("no files added");
}
for (i = 0; i < dir->nr; i++)
if (add_file_to_cache(dir->entries[i]->name, flags)) {
if (!ignore_add_errors)
die("adding files failed");
exit_status = 1;
}
return exit_status;
}
int cmd_add(int argc, const char **argv, const char *prefix)
{
int exit_status = 0;
int newfd;
const char **pathspec;
struct dir_struct dir;
int flags;
int add_new_files;
int require_pathspec;
git-add --interactive A script to be driven when the user says "git add --interactive" is introduced. When it is run, first it runs its internal 'status' command to show the current status, and then goes into its internactive command loop. The command loop shows the list of subcommands available, and gives a prompt "What now> ". In general, when the prompt ends with a single '>', you can pick only one of the choices given and type return, like this: *** Commands *** 1: status 2: update 3: revert 4: add untracked 5: patch 6: diff 7: quit 8: help What now> 1 You also could say "s" or "sta" or "status" above as long as the choice is unique. The main command loop has 6 subcommands (plus help and quit). * 'status' shows the change between HEAD and index (i.e. what will be committed if you say "git commit"), and between index and working tree files (i.e. what you could stage further before "git commit" using "git-add") for each path. A sample output looks like this: staged unstaged path 1: binary nothing foo.png 2: +403/-35 +1/-1 git-add--interactive.perl It shows that foo.png has differences from HEAD (but that is binary so line count cannot be shown) and there is no difference between indexed copy and the working tree version (if the working tree version were also different, 'binary' would have been shown in place of 'nothing'). The other file, git-add--interactive.perl, has 403 lines added and 35 lines deleted if you commit what is in the index, but working tree file has further modifications (one addition and one deletion). * 'update' shows the status information and gives prompt "Update>>". When the prompt ends with double '>>', you can make more than one selection, concatenated with whitespace or comma. Also you can say ranges. E.g. "2-5 7,9" to choose 2,3,4,5,7,9 from the list. You can say '*' to choose everything. What you chose are then highlighted with '*', like this: staged unstaged path 1: binary nothing foo.png * 2: +403/-35 +1/-1 git-add--interactive.perl To remove selection, prefix the input with - like this: Update>> -2 After making the selection, answer with an empty line to stage the contents of working tree files for selected paths in the index. * 'revert' has a very similar UI to 'update', and the staged information for selected paths are reverted to that of the HEAD version. Reverting new paths makes them untracked. * 'add untracked' has a very similar UI to 'update' and 'revert', and lets you add untracked paths to the index. * 'patch' lets you choose one path out of 'status' like selection. After choosing the path, it presents diff between the index and the working tree file and asks you if you want to stage the change of each hunk. You can say: y - add the change from that hunk to index n - do not add the change from that hunk to index a - add the change from that hunk and all the rest to index d - do not the change from that hunk nor any of the rest to index j - do not decide on this hunk now, and view the next undecided hunk J - do not decide on this hunk now, and view the next hunk k - do not decide on this hunk now, and view the previous undecided hunk K - do not decide on this hunk now, and view the previous hunk After deciding the fate for all hunks, if there is any hunk that was chosen, the index is updated with the selected hunks. * 'diff' lets you review what will be committed (i.e. between HEAD and index). This is still rough, but does everything except a few things I think are needed. * 'patch' should be able to allow splitting a hunk into multiple hunks. * 'patch' does not adjust the line offsets @@ -k,l +m,n @@ in the hunk header. This does not have major problem in practice, but it _should_ do the adjustment. * It does not have any explicit support for a merge in progress; it may not work at all. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-11 07:55:50 +03:00
git_config(add_config, NULL);
argc = parse_options(argc, argv, prefix, builtin_add_options,
builtin_add_usage, PARSE_OPT_KEEP_ARGV0);
if (patch_interactive)
add_interactive = 1;
if (add_interactive)
exit(interactive_add(argc - 1, argv + 1, prefix));
if (edit_interactive)
return(edit_patch(argc, argv, prefix));
argc--;
argv++;
if (addremove && take_worktree_changes)
die("-A and -u are mutually incompatible");
if ((addremove || take_worktree_changes) && !argc) {
static const char *here[2] = { ".", NULL };
argc = 1;
argv = here;
}
add_new_files = !take_worktree_changes && !refresh_only;
require_pathspec = !take_worktree_changes;
newfd = hold_locked_index(&lock_file, 1);
flags = ((verbose ? ADD_CACHE_VERBOSE : 0) |
(show_only ? ADD_CACHE_PRETEND : 0) |
(intent_to_add ? ADD_CACHE_INTENT : 0) |
(ignore_add_errors ? ADD_CACHE_IGNORE_ERRORS : 0) |
(!(addremove || take_worktree_changes)
? ADD_CACHE_IGNORE_REMOVAL : 0));
if (require_pathspec && argc == 0) {
fprintf(stderr, "Nothing specified, nothing added.\n");
fprintf(stderr, "Maybe you wanted to say 'git add .'?\n");
return 0;
}
pathspec = validate_pathspec(argc, argv, prefix);
if (read_cache() < 0)
die("index file corrupt");
treat_gitlinks(pathspec);
if (add_new_files) {
int baselen;
/* Set up the default git porcelain excludes */
memset(&dir, 0, sizeof(dir));
if (!ignored_too) {
dir.flags |= DIR_COLLECT_IGNORED;
setup_standard_excludes(&dir);
}
/* This picks up the paths that are not tracked */
baselen = fill_directory(&dir, pathspec);
if (pathspec)
prune_directory(&dir, pathspec, baselen);
}
if (refresh_only) {
refresh(verbose, pathspec);
goto finish;
}
exit_status |= add_files_to_cache(prefix, pathspec, flags);
if (add_new_files)
exit_status |= add_files(&dir, flags);
finish:
if (active_cache_changed) {
if (write_cache(newfd, active_cache, active_nr) ||
commit_locked_index(&lock_file))
die("Unable to write new index file");
}
return exit_status;
}