microsoft
/
git
зеркало из https://github.com/microsoft/git.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
git/Documentation/git-verify-pack.txt

54 строки
970 B
Plaintext
Исходник Обычный вид История

[PATCH] Add git-verify-pack command. Given a list of <pack>.idx files, this command validates the index file and the corresponding .pack file for consistency. This patch also uses the same validation mechanism in fsck-cache when the --full flag is used. During normal operation, sha1_file.c verifies that a given .idx file matches the .pack file by comparing the SHA1 checksum stored in .idx file and .pack file as a minimum sanity check. We may further want to check the pack signature and version when we map the pack, but that would be a separate patch. Earlier, errors to map a pack file was not flagged fatal but led to a random fatal error later. This version explicitly die()s when such an error is detected. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-29 13:51:27 +04:00
git-verify-pack(1)
==================
NAME
----
Remove trailing dot after short description Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-09 19:24:50 +03:00
git-verify-pack - Validate packed git archive files
[PATCH] Add git-verify-pack command. Given a list of <pack>.idx files, this command validates the index file and the corresponding .pack file for consistency. This patch also uses the same validation mechanism in fsck-cache when the --full flag is used. During normal operation, sha1_file.c verifies that a given .idx file matches the .pack file by comparing the SHA1 checksum stored in .idx file and .pack file as a minimum sanity check. We may further want to check the pack signature and version when we map the pack, but that would be a separate patch. Earlier, errors to map a pack file was not flagged fatal but led to a random fatal error later. This version explicitly die()s when such an error is detected. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-29 13:51:27 +04:00
SYNOPSIS
--------
Documentation/git-verify-pack.txt: added documentation for --. The -- option has been added to the documentation of git-verify-pack. Signed-off-by: Nikolai Weibull <nikolai@bitwi.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-09 02:28:05 +03:00
'git-verify-pack' [-v] [--] <pack>.idx ...
[PATCH] Add git-verify-pack command. Given a list of <pack>.idx files, this command validates the index file and the corresponding .pack file for consistency. This patch also uses the same validation mechanism in fsck-cache when the --full flag is used. During normal operation, sha1_file.c verifies that a given .idx file matches the .pack file by comparing the SHA1 checksum stored in .idx file and .pack file as a minimum sanity check. We may further want to check the pack signature and version when we map the pack, but that would be a separate patch. Earlier, errors to map a pack file was not flagged fatal but led to a random fatal error later. This version explicitly die()s when such an error is detected. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-29 13:51:27 +04:00
DESCRIPTION
-----------
Convert usage of GIT and Git into git Convert usage of GIT and Git into git. Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-11 03:01:31 +04:00
Reads given idx file for packed git archive created with
[PATCH] Add git-verify-pack command. Given a list of <pack>.idx files, this command validates the index file and the corresponding .pack file for consistency. This patch also uses the same validation mechanism in fsck-cache when the --full flag is used. During normal operation, sha1_file.c verifies that a given .idx file matches the .pack file by comparing the SHA1 checksum stored in .idx file and .pack file as a minimum sanity check. We may further want to check the pack signature and version when we map the pack, but that would be a separate patch. Earlier, errors to map a pack file was not flagged fatal but led to a random fatal error later. This version explicitly die()s when such an error is detected. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-29 13:51:27 +04:00
git-pack-objects command and verifies idx file and the
corresponding pack file.
OPTIONS
-------
<pack>.idx ...::
The idx files to verify.
[PATCH] Documentation: packed GIT support commands. This adds documentation for creating packed archives, inspecting, validating them, and unpacking them. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-14 11:08:05 +04:00
-v::
After verifying the pack, show list of objects contained
[PATCH] Random documentation fixes The fixes focuses on improving the HTML output. Most noteworthy: - Fix the Makefile to also make various *.html files depend on included files. - Consistently use 'NOTE: ...' instead of '[ ... ]' for additional info. - Fix ending '::' for description lists in OPTION section etc. - Fix paragraphs in description lists ending up as preformated text. - Always use listingblocks (preformatted text wrapped in lines with -----) for examples that span empty lines, so they are put in only one HTML block. - Use '1.' instead of '(1)' for numbered lists. - Fix linking to other GIT docs. - git-rev-list.txt: put option descriptions in an OPTION section. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-03 21:16:30 +04:00
in the pack.
Fix up docs where "--" isn't displayed correctly. A bare "--" doesn't show up in man or html pages correctly as two individual dashes unless backslashed as \-- in the asciidoc source. Note, no backslash is needed inside a literal block. Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-05 23:05:24 +04:00
\--::
Documentation/git-verify-pack.txt: added documentation for --. The -- option has been added to the documentation of git-verify-pack. Signed-off-by: Nikolai Weibull <nikolai@bitwi.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-09 02:28:05 +03:00
Do not interpret any more arguments as options.
[PATCH] Documentation: packed GIT support commands. This adds documentation for creating packed archives, inspecting, validating them, and unpacking them. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-14 11:08:05 +04:00
[PATCH] Random documentation fixes The fixes focuses on improving the HTML output. Most noteworthy: - Fix the Makefile to also make various *.html files depend on included files. - Consistently use 'NOTE: ...' instead of '[ ... ]' for additional info. - Fix ending '::' for description lists in OPTION section etc. - Fix paragraphs in description lists ending up as preformated text. - Always use listingblocks (preformatted text wrapped in lines with -----) for examples that span empty lines, so they are put in only one HTML block. - Use '1.' instead of '(1)' for numbered lists. - Fix linking to other GIT docs. - git-rev-list.txt: put option descriptions in an OPTION section. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-03 21:16:30 +04:00
OUTPUT FORMAT
-------------
When specifying the -v option the format used is:
[PATCH] Documentation: packed GIT support commands. This adds documentation for creating packed archives, inspecting, validating them, and unpacking them. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-14 11:08:05 +04:00
add storage size output to 'git verify-pack -v' This can possibly break external scripts that depend on the previous output, but those script can't possibly be critical to Git usage, and fixing them should be trivial. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-28 08:25:20 +03:00
SHA1 type size size-in-pack-file offset-in-packfile
[PATCH] Documentation: packed GIT support commands. This adds documentation for creating packed archives, inspecting, validating them, and unpacking them. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-14 11:08:05 +04:00
[PATCH] Random documentation fixes The fixes focuses on improving the HTML output. Most noteworthy: - Fix the Makefile to also make various *.html files depend on included files. - Consistently use 'NOTE: ...' instead of '[ ... ]' for additional info. - Fix ending '::' for description lists in OPTION section etc. - Fix paragraphs in description lists ending up as preformated text. - Always use listingblocks (preformatted text wrapped in lines with -----) for examples that span empty lines, so they are put in only one HTML block. - Use '1.' instead of '(1)' for numbered lists. - Fix linking to other GIT docs. - git-rev-list.txt: put option descriptions in an OPTION section. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-03 21:16:30 +04:00
for objects that are not deltified in the pack, and
[PATCH] Documentation: packed GIT support commands. This adds documentation for creating packed archives, inspecting, validating them, and unpacking them. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-14 11:08:05 +04:00
add storage size output to 'git verify-pack -v' This can possibly break external scripts that depend on the previous output, but those script can't possibly be critical to Git usage, and fixing them should be trivial. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-28 08:25:20 +03:00
SHA1 type size size-in-packfile offset-in-packfile depth base-SHA1
[PATCH] Random documentation fixes The fixes focuses on improving the HTML output. Most noteworthy: - Fix the Makefile to also make various *.html files depend on included files. - Consistently use 'NOTE: ...' instead of '[ ... ]' for additional info. - Fix ending '::' for description lists in OPTION section etc. - Fix paragraphs in description lists ending up as preformated text. - Always use listingblocks (preformatted text wrapped in lines with -----) for examples that span empty lines, so they are put in only one HTML block. - Use '1.' instead of '(1)' for numbered lists. - Fix linking to other GIT docs. - git-rev-list.txt: put option descriptions in an OPTION section. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-03 21:16:30 +04:00
for objects that are deltified.
[PATCH] Add git-verify-pack command. Given a list of <pack>.idx files, this command validates the index file and the corresponding .pack file for consistency. This patch also uses the same validation mechanism in fsck-cache when the --full flag is used. During normal operation, sha1_file.c verifies that a given .idx file matches the .pack file by comparing the SHA1 checksum stored in .idx file and .pack file as a minimum sanity check. We may further want to check the pack signature and version when we map the pack, but that would be a separate patch. Earlier, errors to map a pack file was not flagged fatal but led to a random fatal error later. This version explicitly die()s when such an error is detected. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-29 13:51:27 +04:00
Author
------
Written by Junio C Hamano <junkio@cox.net>
Documentation
--------------
Documentation by Junio C Hamano
GIT
---
Documentation: rename gitlink macro to linkgit Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-29 09:20:38 +03:00
Part of the linkgit:git[7] suite